|
Suddenly can't burn to DL
|
|
|
Johnny419
Newbie
|
21. November 2007 @ 14:36 |
Link to this message
|
I could really use anyone's suggestions here as I've exhausted seemingly all options.
Here's my problem. I am trying to backup one of my double layer movies to a double layer disc. I ripped it using DVD Decrypter 3.5.4.0 to an ISO file, which also created the linking MDS file. I then put in a blank Memorex DVD+R DL disc and open Decrypter with the MDS file. The Device Buffer bar (on the left) fills up, but the buffer on the right never does, and the burn never starts. After about 10 minutes, it fails, seemingly never burning anything to the inserted disc.
This is the same procedure, along with the same hardware that I've been using up until a week ago. Same brand of Double Layer discs from the same spindle. It is the same burner with the latest firmware, using the same software (DVD Decrypter 3.5.4.0). I do not have a problem when burning to a 4.7GB disc (after using DVD Shrink of course), so that should rule out the fact that the DVD Burner hardware is defective. I have tried using four different DL discs, though all Memorex, all failed.
Any suggestions would be very helpful, and I'm sure there will be questions as well since I must have missed out on some necessary details.
Thanks.
|
|
Advertisement
|
 |
|
|
|
Johnny419
Newbie
|
21. November 2007 @ 15:03 |
Link to this message
|
|
Forgot to mention that I already tried uninstalling the drivers for the DVD Burner, and restarting the computer. Also, ran Adware to remove spyware.
|
AfterDawn Addict
|
22. November 2007 @ 01:41 |
Link to this message
|
instead of using dvd decrypter use imgburn its a much better program foir DL media
or try using clonedvd 2
remember to burn the DVD+R DL at 4x max.
if you uninstall the drive uninstall the IDE controllers also then reboot
Antec 1200 Full-Tower Case/Thermaltake 750-Watt PS/ASUS SABERTOOTH Z77 Mobo/Western Digital Black WD500 500GB 7200 RPM 64MB Cache/NVIDIA GeForce 8800GTX 384-bit GDDR3 PCI Express Video Card/CORSAIR DOMINATOR PLATINUM 16GB DDR3 /Intel Core i7-3770K Ivy Bridge 3.5GHz (3.9GHz Turbo)/CORSAIR Hydro High Performance Liquid CPU Cooler/3-Asus DRW-24B1ST Sata Drives/Samsung 2493HM 24" LCD Monitior 1920x1200 resolution,5ms respone time/OS Windows 10 Pro SP1 64-bit
|
|
Johnny419
Newbie
|
22. November 2007 @ 02:10 |
Link to this message
|
|
Thanks. How do you remove the IDE controllers though? Thru Device Manager and Uninstalling the appropriate hardware? If so, then that is what I meant by uninstalling the drivers for the DVD Burner.
|
AfterDawn Addict
|
22. November 2007 @ 04:00 |
Link to this message
|
Antec 1200 Full-Tower Case/Thermaltake 750-Watt PS/ASUS SABERTOOTH Z77 Mobo/Western Digital Black WD500 500GB 7200 RPM 64MB Cache/NVIDIA GeForce 8800GTX 384-bit GDDR3 PCI Express Video Card/CORSAIR DOMINATOR PLATINUM 16GB DDR3 /Intel Core i7-3770K Ivy Bridge 3.5GHz (3.9GHz Turbo)/CORSAIR Hydro High Performance Liquid CPU Cooler/3-Asus DRW-24B1ST Sata Drives/Samsung 2493HM 24" LCD Monitior 1920x1200 resolution,5ms respone time/OS Windows 10 Pro SP1 64-bit
This message has been edited since posting. Last time this message was edited on 22. November 2007 @ 04:00
|
|
Johnny419
Newbie
|
22. November 2007 @ 12:14 |
Link to this message
|
Yea, I did that already. And I just tried ImgBurn. It got thru the burn successfully, but failed on the verification.
|
AfterDawn Addict
|
22. November 2007 @ 12:23 |
Link to this message
|
burn DL at 4x max
Verbatim DVD+R DL is the best
Antec 1200 Full-Tower Case/Thermaltake 750-Watt PS/ASUS SABERTOOTH Z77 Mobo/Western Digital Black WD500 500GB 7200 RPM 64MB Cache/NVIDIA GeForce 8800GTX 384-bit GDDR3 PCI Express Video Card/CORSAIR DOMINATOR PLATINUM 16GB DDR3 /Intel Core i7-3770K Ivy Bridge 3.5GHz (3.9GHz Turbo)/CORSAIR Hydro High Performance Liquid CPU Cooler/3-Asus DRW-24B1ST Sata Drives/Samsung 2493HM 24" LCD Monitior 1920x1200 resolution,5ms respone time/OS Windows 10 Pro SP1 64-bit
|
|
Johnny419
Newbie
|
27. November 2007 @ 22:35 |
Link to this message
|
Thanks for all your help. Unfortunately, nothing worked. However, I ordered a new drive, installed it and all is working well...with the new drive only.
The old drive won't even work with the new Verbatim DVD+R DL discs. Still a mystery...
|
Senior Member
|
27. November 2007 @ 22:52 |
Link to this message
|
|
Specific make and model of old drive?
|
AfterDawn Addict
|
28. November 2007 @ 03:56 |
Link to this message
|
|
it may not have been a DL burner
Antec 1200 Full-Tower Case/Thermaltake 750-Watt PS/ASUS SABERTOOTH Z77 Mobo/Western Digital Black WD500 500GB 7200 RPM 64MB Cache/NVIDIA GeForce 8800GTX 384-bit GDDR3 PCI Express Video Card/CORSAIR DOMINATOR PLATINUM 16GB DDR3 /Intel Core i7-3770K Ivy Bridge 3.5GHz (3.9GHz Turbo)/CORSAIR Hydro High Performance Liquid CPU Cooler/3-Asus DRW-24B1ST Sata Drives/Samsung 2493HM 24" LCD Monitior 1920x1200 resolution,5ms respone time/OS Windows 10 Pro SP1 64-bit
|
Senior Member
|
28. November 2007 @ 07:09 |
Link to this message
|
|
Exactly. Instead of us guessing, a make and model would be helpful.
Why throw away a good drive?
|
|
Advertisement
|
|
|
|
Johnny419
Newbie
|
1. December 2007 @ 11:40 |
Link to this message
|
|
HL-DT-ST DVD+-RW GSA-H21N with firmware B109.
|
