|
|
|
Dvd Burning failed using nero recode 2
|
|
|
shimo2007
Suspended due to non-functional email address
|
30. December 2007 @ 10:20 |
Link to this message
|
I used to convert downloaded avi movies to dvd format using winavi converter, then I burn the entire dvd to dvd using nero recode 2. It used to work successfully everytime. 10 days ago I used nero to burn an iso image for a wii game. It failed burning near the end. Afterwards whenever I try to burn a dvd to another dvd it fails to write to disc at the very begining. ( the program imports the video_TS first, then it fails to burn it). I use imation DVD+R as always. Here is the error log file I get:
********** Nero Recode **********
Version: 2.2.7.6
Project type: Copy entire DVD
Target size: DVD5 (2282925)
11:13:44 File LangStreamPatcher.cpp, Line 56
Command table patching started...
11:13:44 File LangStreamPatcher.cpp, Line 103
VTS 1 - VTS_PGCITI - PGC 1 patched!
11:13:44 File LangStreamPatcher.cpp, Line 135
All tables successfully patched!
Burn settings:
Target: HL-DT-ST DVDRAM GSA-4082N
Number of copies: 1
Write speed: 0 KB/s
Temp folder: C:\Documents and Settings\Sherine\My Documents\Nero Recode (18345181184 bytes free)
Direct burning: true
Target media: DVD+R/RW, DVD-R/RW, DVD-RAM, DVD-R DL, DVD+R DL
Shutdown when finished: false
Advanced Analysis: false
Compress Adaptive: false
11:13:48 File burn_dvdfiles.cpp, Line 231
Compile DVD: init
VTS_01 Menus Vobs [40 vobus] 13.25MB -> 13.25MB [R 1.00]
Video: 13.13MB, extra: 0.12MB
Audio: 0 streams
Subpicture: 1 streams
0. 0. Unspecified 0.04MB [enabled]
VTS_01 Title Vobs [15118 vobus] 4057.31MB -> 4057.31MB [R 1.00]
Video: 3821.15MB, extra: 236.17MB
Audio: 1 streams
0. 0. Dolby Digital 2-ch Unspecified 206.64MB [enabled]
Subpicture: 0 streams
11:13:48 File burn_dvdfiles.cpp, Line 1152
Compile DVD: begin copy 1
11:13:48 File NeroRecorderBase.cpp, Line 506
Writing to disc: D
11:13:48 File NeroRecorderBase.cpp, Line 520
Free capacity on disc: 2283092 sectors (2295104)
11:13:49 File burn_dvdfiles.cpp, Line 479
Compile DVD: burning 2283092 sectors (2084223 required)
11:13:49 File burn_dvdfiles.cpp, Line 656
Compile DVD: adjust target size to 4459.16MB (4070.75MB obtained)
11:13:49 File burn_dvdfiles.cpp, Line 524
Compiling DVD Volume started
11:14:20 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VTS_01 Menus Vobs
VTS_01 Menus Vobs:
Original 13.25MB -> Expected 13.25MB -> Output 13.25MB
Finished error 0.00MB
Ratio encoded = 0
Original encoded = 40
Slide encoded = 0
StillImage encoded = 0
Output extra size = 0.09MB
Source video size = 13.16MB
Pictures Modified [I 0] [P 0] [B 0]
11:14:20 File NeroRecorder.cpp, Line 464
Burn failed (3)
----- Begin NeroAPI error log -----
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 11:54:32 AM
NT-SPTI used
Nero API version: 7.0.1.4
Using interface version: 7.0.0.0
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: Ahead\Nero Recode
Internal Version: 7, 0, 1, 4
Recorder: <HL-DT-ST DVDRAM GSA-4082N>Version: CQ04 - HA 1 TA 0 - 7.0.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
DiskPeripheral : ST960812A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4082N atapi Port 0 ID 1 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4082N D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 73400320 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 502MB (514480kB)
Free physical memory: 156MB (160108kB)
Memory in use : 68
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
24.12.2007
NeroAPI
11:13:48 AM #1 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: -1 ( 0:00.-1, 0MB)
11:13:48 AM #2 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO
11:13:48 AM #3 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: HL-DT-ST DVDRAM GSA-4082N, Media type: DVD+R
Disc Manufacturer ID: TDK, Media Type ID: 003, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7
11:13:48 AM #4 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
11:13:48 AM #5 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
11:13:48 AM #6 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-ROM (0), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Media Specific [16..63]:
00 00 07 54 44 4B 00 00 - 00 00 00 30 30 33 00 38 ...TDK.....003.8
23 54 37 12 02 4A 73 02 - 9C 6E 15 15 0B 0B 08 08 #T7..Js..n......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
11:13:49 AM #7 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes
11:13:49 AM #8 Text 0 File BurnAtOnceRecorder.cpp, Line 1005
Estimated filesystem size: 544
11:13:49 AM #9 Phase 36 File APIProgress.cpp, Line 278
Burn process started at 4x (5,540 KB/s)
11:14:19 AM #10 SPTI -1194 File SCSIPassThrough.cpp, Line 323
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1194)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x04
CDB Data: 0x53 00 00 00 00 00 00 02 40 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 10 35 20 03 0E 73 04
11:14:19 AM #11 Text 0 File BurnAtOnceRecorder.cpp, Line 679
Error reserving fragment (0)
11:14:20 AM #12 Text 0 File BurnAtOnceRecorder.cpp, Line 3640
Disc info:
Partitions: 0
11:14:20 AM #13 Text 0 File BurnAtOnceRecorder.cpp, Line 1864
Error reserving start segment
11:14:20 AM #14 Text 0 File BurnAtOnceRecorder.cpp, Line 3640
Disc info:
Partitions: 0
11:14:20 AM #15 Phase 179 File APIProgress.cpp, Line 278
Writing file to disc failed
11:14:20 AM #16 Text 0 File BurnAtOnceRecorder.cpp, Line 3640
Disc info:
Partitions: 0
11:14:27 AM #17 SPTI -1194 File SCSIPassThrough.cpp, Line 323
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1194)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x04
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 10 35 20 03 0E 73 04
11:14:30 AM #18 SPTI -1194 File SCSIPassThrough.cpp, Line 323
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1194)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x04
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 10 35 20 03 0E 73 04
11:14:36 AM #19 Phase 38 File APIProgress.cpp, Line 278
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 5/2/2007 8:04:15 PM
File 'Drivers\PXHELP20.SYS': Ver=3.00.56a, size=43528 bytes, created 7/27/2007 1:06:18 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
----- End NeroAPI error log -----
11:14:36 File burn_dvdfiles.cpp, Line 301
Compile DVD: exit
Help please! I damaged 10 dvd's trying over and over again ang I got too frustrated trying to find a reason for this. Did the wii game that failed burning has anything to do with this? I also tried buning the dvd using winavi video converter, it burned successfully, but when I tried to play it, it didn't work on dvd player or computer.
|
|
Advertisement
|
 |
|
|
Moderator
|
30. December 2007 @ 13:33 |
Link to this message
|
I don't think burning the Wii game had anything to do with it.
So here's some other suggestions:
Imation uses different manufacturers so you never know who you will get. The ones you using now are bad by TDK - ok but may not be compatible w/ your drive. So I would try different media like Taiyo Yuden, Verbatim or made in Japan Sony, Fuji or Maxell.
Direct burning: true
Turn this off. Let Nero transode the file 1st then if there is a problem transcoding you won't have a coaster. In Burn At Once/Direct Burn Nero transcodes and burns at the same time.
Nero API version: 7.0.1.4
Update Nero to the latest - 7.10.1.2
File 'Drivers\CDRALW2K.SYS'
Roxio and Nero don't always play well. So you can uninstall Roxio and run the zap tool
|
|
shimo2007
Suspended due to non-functional email address
|
31. December 2007 @ 05:17 |
Link to this message
|
Thank u very much for your help. I tried turning of Burn at once, the dvd was encoded successfully and the burning started and continued until it failed near the end: Could not perform end of Disc-at-once, PMA update failure, Session fixation error.
Here's the log file:
********** Nero Recode **********
Version: 2.2.7.6
shimo
Project type: Copy entire DVD
Target size: DVD5 (2282925)
11:27:36 File LangStreamPatcher.cpp, Line 56
Command table patching started...
11:27:36 File LangStreamPatcher.cpp, Line 103
VTS 1 - VTS_PGCITI - PGC 1 patched!
11:27:36 File LangStreamPatcher.cpp, Line 135
All tables successfully patched!
Burn settings:
Target: HL-DT-ST DVDRAM GSA-4082N
Number of copies: 1
Write speed: 0 KB/s
Temp folder: C:\Documents and Settings\Sherine\My Documents\Nero Recode (17291644928 bytes free)
Direct burning: false
Target media: DVD+R/RW, DVD-R/RW, DVD-RAM, DVD-R DL, DVD+R DL
Shutdown when finished: false
Advanced Analysis: false
Compress Adaptive: false
11:30:52 File burn_dvdfiles.cpp, Line 231
Compile DVD: init
VTS_01 Menus Vobs [40 vobus] 13.27MB -> 13.27MB [R 1.00]
Video: 13.15MB, extra: 0.12MB
Audio: 0 streams
Subpicture: 1 streams
0. 0. Unspecified 0.04MB [enabled]
VTS_01 Title Vobs [13535 vobus] 4039.82MB -> 4039.82MB [R 1.00]
Video: 3830.96MB, extra: 208.86MB
Audio: 1 streams
0. 0. Dolby Digital 2-ch Unspecified 182.42MB [enabled]
Subpicture: 0 streams
11:30:52 File burn_dvdfiles.cpp, Line 1152
Compile DVD: begin copy 1
11:30:52 File NeroRecorderBase.cpp, Line 506
Writing to disc: D
11:30:53 File NeroRecorderBase.cpp, Line 520
Free capacity on disc: 2283092 sectors (2295104)
11:30:53 File burn_dvdfiles.cpp, Line 479
Compile DVD: burning 2283092 sectors (2075269 required)
11:30:53 File burn_dvdfiles.cpp, Line 656
Compile DVD: adjust target size to 4459.16MB (4053.26MB obtained)
11:30:53 File burn_dvdfiles.cpp, Line 524
Compiling DVD Volume started
11:30:54 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VTS_01 Menus Vobs
VTS_01 Menus Vobs:
Original 13.27MB -> Expected 13.27MB -> Output 13.27MB
Finished error 0.00MB
Ratio encoded = 0
Original encoded = 40
Slide encoded = 0
StillImage encoded = 0
Output extra size = 0.09MB
Source video size = 13.18MB
Pictures Modified [I 0] [P 0] [B 0]
11:34:45 File NeroRecorder.cpp, Line 609
Added extra file VTS_01_2.VOB
11:37:25 File NeroRecorder.cpp, Line 609
Added extra file VTS_01_3.VOB
11:40:00 File NeroRecorder.cpp, Line 609
Added extra file VTS_01_4.VOB
11:42:01 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VTS_01 Title Vobs
VTS_01 Title Vobs:
Original 4039.82MB -> Expected 4039.82MB -> Output 4039.81MB
Finished error -0.00MB
Ratio encoded = 1
Original encoded = 13534
Slide encoded = 0
StillImage encoded = 0
Output extra size = 210.20MB
Source video size = 3829.62MB
Pictures Modified [I 0] [P 0] [B 0]
11:42:04 File burn_dvdfiles.cpp, Line 547
Compile DVD: completed successfuly (4053.26MB)
11:42:04 File NeroRecorderBase.cpp, Line 1130
Burning 9 files with total size of 4250148864 bytes on hard disk
11:42:04 File burn_dvdfiles.cpp, Line 1152
Compile DVD: begin copy 1
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero API version: 7.0.1.4
Using interface version: 6.6.0.11
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: Ahead\Nero Recode
Internal Version: 7, 0, 1, 4
Recorder: <HL-DT-ST DVDRAM GSA-4082N>Version: CQ04 - HA 1 TA 0 - 7.0.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
DiskPeripheral : ST960812A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4082N atapi Port 0 ID 1 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4082N D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 73400320 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 502MB (514480kB)
Free physical memory: 74MB (76236kB)
Memory in use : 85
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
31.12.2007
NeroAPI
11:42:05 AM #1 Phase 112 File APIProgress.cpp, Line 278
DVD-Video files reallocation started
11:42:05 AM #2 Phase 114 File APIProgress.cpp, Line 278
DVD-Video files reallocation completed (no file modified)
11:42:05 AM #3 Phase 111 File APIProgress.cpp, Line 278
DVD-Video files sorted
11:42:05 AM #4 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 262144KB of Memory
11:42:05 AM #5 Text 0 File Reader.cpp, Line 124
Reader running
11:42:05 AM #6 Text 0 File Writer.cpp, Line 113
Writer D: HL-DT-ST DVDRAM GSA-4082N running
11:42:05 AM #7 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
11:42:05 AM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
11:42:05 AM #9 Text 0 File Burncd.cpp, Line 3342
Turn on Disc-At-Once, using DVD media
11:42:05 AM #10 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2075807 (461:17.32, 4054MB)
11:42:05 AM #11 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)
11:42:05 AM #12 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: HL-DT-ST DVDRAM GSA-4082N, Media type: DVD+R
Disc Manufacturer ID: TDK, Media Type ID: 003, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7
11:42:05 AM #13 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
11:42:05 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2075808 (2075808) = #2075808/461:17.33
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2075808 blocks [D: HL-DT-ST DVDRAM GSA-4082N]
--------------------------------------------------------------
11:42:05 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [D: HL-DT-ST DVDRAM GSA-4082N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4251254784, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2075808 | lead-out | 1 | 0x41 | 0x00
11:42:05 AM #16 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
11:42:05 AM #17 Phase 24 File APIProgress.cpp, Line 278
Caching of files started
11:42:05 AM #18 Text 0 File Burncd.cpp, Line 4176
Cache writing successful.
11:42:05 AM #19 Phase 25 File APIProgress.cpp, Line 278
Caching of files completed
11:42:05 AM #20 Phase 36 File APIProgress.cpp, Line 278
Burn process started at 8x (11,080 KB/s)
11:42:05 AM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
11:42:06 AM #22 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-ROM (0), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Media Specific [16..63]:
00 00 07 54 44 4B 00 00 - 00 00 00 30 30 33 00 38 ...TDK.....003.8
23 54 37 12 02 4A 73 02 - 9C 6E 15 15 0B 0B 08 08 #T7..Js..n......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
11:42:06 AM #23 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes
11:52:28 AM #24 Text 0 File WriterStatus.cpp, Line 116
<D: HL-DT-ST DVDRAM GSA-4082N> start writing Lead-Out at LBA 2075808 (1FACA0h), length 0 blocks
11:52:28 AM #25 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
11:52:35 AM #26 SPTI -1194 File SCSIPassThrough.cpp, Line 323
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1194)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x04
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 10 35 20 03 0E 73 04
11:52:35 AM #27 CDR -1194 File ThreadedTransferInterface.cpp, Line 1937
PMA update failure
D: HL-DT-ST DVDRAM GSA-4082N
11:52:35 AM #28 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1937
Could not perform end of Disc-at-once
11:52:35 AM #29 SPTI -1176 File SCSIPassThrough.cpp, Line 323
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x35 02 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x71 00 05 00 00 00 00 10 35 35 31 0E 72 03
11:52:35 AM #30 Phase 127 File APIProgress.cpp, Line 278
Generating DVD high compatibility borders
11:52:35 AM #31 CDR -1176 File WriterStatus.cpp, Line 167
Session fixation error
D: HL-DT-ST DVDRAM GSA-4082N
11:52:35 AM #32 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
11:52:35 AM #33 Phase 38 File APIProgress.cpp, Line 278
Burn process failed at 8x (11,080 KB/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 5/2/2007 8:04:15 PM
File 'Drivers\PXHELP20.SYS': Ver=3.00.56a, size=43528 bytes, created 7/27/2007 1:06:18 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
11:52:53 File NeroRecorderBase.cpp, Line 936
Burn failed (3)
11:52:53 File burn_dvdfiles.cpp, Line 301
Compile DVD: exit
I'm downloading nero update right now. I'll also buy new dvd's and try to burn the project again.
I'm sending the log file so that another reason for burning failure could be clear. What is Pma?
|
Moderator
|
31. December 2007 @ 12:15 |
Link to this message
|
PMA is Program memory area update failure - still a pretty generic failure error.
Try the different media & Nero update.
The Roxio driver is still installed so I would try removing that too (see my post above).
Physical memory : 502MB
Free physical memory: 74MB
Memory in use : 85
In this log you also have 85% of your memory in use. So no multitasking and close any unneeded programs.
If you haven't very recently do this pc maintenance too:
Disc Cleanup
Disc Defrag
Registry Cleaner - here's a good free one - ccleaner. Use the issues & cleaner options.
Virus scan
|
|
shimo2007
Suspended due to non-functional email address
|
2. January 2008 @ 15:06 |
Link to this message
|
|
Hi binkie7
Thank you so much for your help. I bought new dvds Gigamax and I've uninstalled roxio using the link u gave me. I don't know how roxio was installed in the first place?? I tried burning the same project again and it worked. It burned successfully, so I'll throw the rest of the imation package in the basket, because of the frustration and lost time that it caused me. So thank u again for having the time to help me.
|
Moderator
|
2. January 2008 @ 15:52 |
Link to this message
|
|
You're very welcome shimo2007
Glad to hear that did the trick!
Happy Burning!
|
|
Amir89
Senior Member
|
3. January 2008 @ 02:19 |
Link to this message
|
Shimo2007:
Just a tip for the future. Don't use WinAVI, it's shoddy and gives you a lot of out of sync video/audio
Try DVDFlick, it's 100% free, easy to use and very high-quality.
Here's a link: http://www.dvdflick.net/download.php
This message has been edited since posting. Last time this message was edited on 3. January 2008 @ 02:21
|
|
shimo2007
Suspended due to non-functional email address
|
3. January 2008 @ 09:57 |
Link to this message
|
I used to convert avi files using nero vision. It gives a very high quality dvd. The problem was that if I play it on a dvd player, the picture freezesin the last quarter of the movie. I tried it with many movies so many times, that's why I used winavi converter. The picture isn't high quality as nero's but the movie never freezes. Any idea why that happens? By the way the dvd that's converted using nero vision works fine on the computer and never freezes !!!
I've got another question: From where did I get Roxio driver, if I haven't installed it on my computer?
I'll give dvdflick a try and I'll let u know. Thanks for your help.
|
Moderator
|
3. January 2008 @ 11:44 |
Link to this message
|
The Roxio driver comes w/ a few other programs. Sonic & Record Now are Roxio products and there are some other programs that use it - just can't think of them off the top of my head right now.
The freezing at the end can also be caused by poor quality media - poorer quality media tends to get worse towards the end of the disc.
That might be the cause here.
Plus the upgrade of Nero could have helped too if the freezing was due to Nero's transcoding - several fixes w/ the version you were using.
|
|
shimo2007
Suspended due to non-functional email address
|
4. January 2008 @ 09:30 |
Link to this message
|
I downloaded nero 7.10.1.2 update. When I tried to install it there was a problem with the serial number.
|
|
ahmedz123
Newbie
|
4. January 2008 @ 10:27 |
Link to this message
|
I have converted a flie using dvd flick. Now I want to burn a dvd using Nero 8. Will Nero encode it again? What nero utility do i use to burn it without encoding it again?
|
AfterDawn Addict
1 product review
|
4. January 2008 @ 10:38 |
Link to this message
|
|
|
Moderator
|
4. January 2008 @ 14:12 |
Link to this message
|
@shimo2007
What was the problem with the serial #?
You might want to try a clean install - uninstall nero using the clean tool (in the downloads or support section of Nero's site). Reboot then try reinstalling.
@ahmedz123
No hijacking someones else thread. If you still need help start a new thread with your problem. Makes things so much less confusing and rules too.
|
|
Amir89
Senior Member
|
5. January 2008 @ 03:32 |
Link to this message
|
|
ahmedz123 :
I'll PM you a solution for your problem mate ;).
|
|
shimo2007
Suspended due to non-functional email address
|
9. January 2008 @ 15:36 |
Link to this message
|
I tried to convert movies using dvd flick. I didn't like it. The features in win avi are much better, the video is also better.
|
AfterDawn Addict
1 product review
|
9. January 2008 @ 15:46 |
Link to this message
|
Originally posted by shimo2007:
I tried to convert movies using dvd flick. I didn't like it. The features in win avi are much better, the video is also better.
I don't know what version of Winavi are you using, but I used some version 7( before I found the Flick). I can say that DVD Flick surpasses Winavi( same video converted). Of course, in DVD Flick I used the high quality settings. The new version of DVD Flick adds lots of improvements, including option for menus.
It is all about user prefferences, but I will never go back to Winavi.
 Piss me off, and I Will ignore You! |
|
shimo2007
Suspended due to non-functional email address
|
9. January 2008 @ 15:46 |
Link to this message
|
Hi binkie7
Do u think that nero 8 is better than nero 7, that the problem with the freezing of the picture could be solved by using nero 8?
|
|
shimo2007
Suspended due to non-functional email address
|
9. January 2008 @ 15:53 |
Link to this message
|
I use winavi version 8. The version of Dvd flick I used is 1.2.2.1 build 442.
|
|
Advertisement
|
|
|
|
Amir89
Senior Member
|
10. January 2008 @ 05:24 |
Link to this message
|
|
shimo2007:
I have to agree with Cyprus there..
WinAVI is a horrible program.
I used to use it too, it never synced the audio/video correctly and the quality is far below DVDFlick's standards. When I compare movies created by WinAVI to my DVDFlick ones they look like garbage. My guess your not using the correct settings.
Open Up DVDFlick> click on Project Settings>
Click on the Video Tab> Set Encoding Profile to Best>
Make sure the Target Bitrate is set to Auto-Fit>
(the best option if your not too familiar with bitrates and so on..)
Next click on the Burning Tab and tick Create ISO Image, Burn Project to Disc, and Delete ISO Image After Burning.
Select the burner you wish to use, give your DVD a label and your done. Burn a movie and tell us how it goes..
|
|
