|
|
|
DMA-driver error, CRC error with SATA Samsung SH-S203N
|
|
|
davidb
Junior Member
|
8. January 2008 @ 21:04 |
Link to this message
|
After a long time of faithful service, my Pioneer DVR-106D bit the dust. I decided on a Samsung SH-S203N as a replacement. It is a SATA drive on a MSI K8N Neo4 board running XP Pro SR2. When I attempted to burn to a DVD disk in Nero 7 at all speeds (including 4x), I get ?DMA-driver error, CRC error?. It?s a new burner with the current (SB01) firmware. I changed SATA ports and get the same error. After my first failed attempt, I?ve been running in simulation mode while trying to find a cause. Below is my Nero log and thank you, in advance, for your help:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 7.5.1.1
Internal Version: 7, 5, 1, 1
Recorder: <TSSTcorp CDDVDW SH-S203N>Version: SB01 - HA 1 TA 3 - 7.5.1.1
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <E-IDE CD-ROM 50X >Version: 50 - HA 1 TA 0 - 7.5.1.1
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : NVIDIA JBOD 465.76G nvraid Port 0 ID 1 DMA: Off
DiskPeripheral : Maxtor 6Y120P0 nvatabus Port 1 ID 0 DMA: Off
DiskPeripheral : Maxtor 6Y160P0 nvatabus Port 1 ID 1 DMA: Off
CdRomPeripheral : E-IDE CD-ROM 50X nvatabus Port 1 ID 3 DMA: Off
DiskPeripheral : Maxtor 6H500F0 nvatabus Port 2 ID 0 DMA: Off
CdRomPeripheral : TSSTcorp CDDVDW SH-S203N nvatabus Port 3 ID 0 DMA: Off
OtherPeripheral : SI Pseudo Device 0000 Si3114r5 Port 4 ID 16 DMA: Off
=== CDRom-Device-Map ===
TSSTcorp CDDVDW SH-S203N F: CDRom3
E-IDE CD-ROM 50X G: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1048036kB)
Free physical memory: 436MB (446620kB)
Memory in use : 57 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
8.1.2008
ISO compilation
7:45:47 PM #1 Text 0 File Isodoc.cpp, Line 6510
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : FALSE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
7:45:47 PM #2 Text 0 File ThreadedTransfer.cpp, Line 540
ReadBuffer-Pipe got 81920KB of Memory
7:45:47 PM #3 Text 0 File Reader.cpp, Line 126
Reader running
7:45:47 PM #4 Text 0 File Writer.cpp, Line 123
Writer F: TSSTcorp CDDVDW SH-S203N running
7:45:47 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3313
First writeable address = 0 (0x00000000)
7:45:47 PM #6 Text 0 File Burncd.cpp, Line 3443
Turn on Disc-At-Once, using DVD media
7:45:47 PM #7 Text 0 File DlgWaitCD.cpp, Line 300
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 607 ( 0:08.07, 1MB)
7:45:47 PM #8 Text 0 File DlgWaitCD.cpp, Line 312
Write in overburning mode: NO (enabled: CD)
7:45:47 PM #9 Text 0 File DlgWaitCD.cpp, Line 2851
Recorder: TSSTcorp CDDVDW SH-S203N, Media type: DVD-R
Disc Manufacturer: TYG02 -
Disc Application Code: 64, Disc Physical Code: 193
7:45:47 PM #10 Text 0 File DlgWaitCD.cpp, Line 484
>>> Protocol of DlgWaitCD activities: <<<
=========================================
7:45:47 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 863
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 608 (608) = #608/0:8.8
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 608 blocks [F: TSSTcorp CDDVDW SH-S203N]
--------------------------------------------------------------
7:45:47 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1079
Prepare recorder [F: TSSTcorp CDDVDW SH-S203N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1245184, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 608 | 0 | 0x00
0 | 1 | 1 | 0x41 | 608 | 0 | 0x00
608 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
7:45:47 PM #13 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
7:45:47 PM #14 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started
7:45:47 PM #15 Text 0 File Burncd.cpp, Line 4274
Cache writing successful.
7:45:47 PM #16 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed
7:45:47 PM #17 Phase 32 File dlgbrnst.cpp, Line 1730
Simulation started at 4x (5,540 KB/s)
7:45:47 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2746
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
7:45:47 PM #19 Text 0 File DVDR.cpp, Line 2969
Recording mode: Sequential Recording Mode for Multisession
7:45:47 PM #20 Text 0 File DVDR.cpp, Line 3125
Start write address at LBA 0
DVD high compatibility mode: Yes
7:45:47 PM #21 Text 0 File Cdrdrv.cpp, Line 9215
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
7:45:47 PM #22 SPTI -1502 File SCSIPassThrough.cpp, Line 291
F: CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1502)
Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x08
Sense Qual: 0x03
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 00 08 03
Buffer x05f80000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
7:45:47 PM #23 CDR -1502 File Writer.cpp, Line 312
DMA-driver error, CRC error
F: TSSTcorp CDDVDW SH-S203N
7:45:48 PM #24 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
7:45:48 PM #25 Text 0 File DVDR.cpp, Line 3341
EndDAO: Last written address was -1
7:45:58 PM #26 Phase 133 File dlgbrnst.cpp, Line 1730
Writing short lead-out
7:45:58 PM #27 Phase 34 File dlgbrnst.cpp, Line 1730
Simulation failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 5/19/2006 3:16:24 PM
File 'WNASPINT.DLL': Ver=5, 0, 0, 1, size=57344 bytes, created 6/13/2001 4:30:32 PM
File 'Drivers\PXHELP20.SYS': Ver=3.00.56a, size=43528 bytes, created 3/7/2007 5:51:00 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Advertisement
|
|
|
|
AfterDawn Addict
1 product review
|
8. January 2008 @ 21:57 |
Link to this message
|
 Piss me off, and I Will ignore You!This message has been edited since posting. Last time this message was edited on 8. January 2008 @ 22:04
|
|
davidb
Junior Member
|
9. January 2008 @ 06:54 |
Link to this message
|
Thanks for your reply. I didn't think DMA was an issue with SATA. Where did you see the firmware? I went to the Samsung and only saw firmware versions up to SB01.
This message has been edited since posting. Last time this message was edited on 9. January 2008 @ 06:56
|
AfterDawn Addict
1 product review
|
9. January 2008 @ 09:20 |
Link to this message
|
|
You are right about the firmware, my mistake. I apologise.
I looked at the wrong TSS drive that had the same firmware name as yours
Piss me off, and I Will ignore You!
This message has been edited since posting. Last time this message was edited on 9. January 2008 @ 09:25
|
|
davidb
Junior Member
|
9. January 2008 @ 10:48 |
Link to this message
|
|
I was looking at your link regarding activating DMA. It refers to make changes to the Primary or secondary IDE channel. Do SATA drives also rely on these channels?
This message has been edited since posting. Last time this message was edited on 9. January 2008 @ 10:48
|
|
Thrash4u
Newbie
|
27. April 2008 @ 23:02 |
Link to this message
|
I am having the same problem. I had an old IDE Drive, and replaced it with this drive. Is this question ever going to get answered?
|
Senior Member
|
28. April 2008 @ 04:21 |
Link to this message
|
If you?ve got Dma off on any of your ide channels and you?ve got your hardrives connected to these it will effect your burning with your Sata drive Dma doesn?t apply to Sata connections also make sure you don?t connect it to the raid sata connection unless you go into the bios and select none raid for that connection also make sure on you ide channels you don?t put an hard drive and a cdrom on the same ribbon cable as the cdrom can slow down your hard drive and make Dma unavailable for that drive when using Sata burners make sure your chipset drivers are up to date for your motherboard.
|
|
Thrash4u
Newbie
|
28. April 2008 @ 05:52 |
Link to this message
|
|
Soi I should double check my dma settings, and make sure they are off?
|
Senior Member
|
28. April 2008 @ 07:05 |
Link to this message
|
|
No make sure they are on :)
|
|
Thrash4u
Newbie
|
29. April 2008 @ 20:31 |
Link to this message
|
Well, here is the situation: I had a Plextor IDE burner, it crapped out, I replaced it with two Samsung SH-S203N 's I keep on having burn issues where i get the DMA driver error, CRC error.
I have three Hd's plugged in. Two SATA and one IDE drive(set as my OS drive/master drive)
I RMA'd the drives to Newegg.com, and still am having the same problems. My specs:
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 2 (2600.xpsp_sp2_gdr.070227-2254)
Language: English (Regional Setting: English)
System Manufacturer: NVIDIA
System Model: AWRDACPI
BIOS: )Phoenix - Award WorkstationBIOS v6.00PG
Processor: AMD Athlon(tm) 64 Processor 3800+, MMX, 3DNow, ~2.4GHz
Memory: 2046MB RAM
Page File: 657MB used, 4327MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.2180 32bit Unicode
My mobo is a DFI Lanparty UT Nf4 Ultra-d
I can't for the life of me figure out whats going on.
I clicked on the properties of the IDE ATA/ATAPI controllers:
on the NVIDIA nforce4 ADMA controller it shows this:
Serial ATA Generation 1 - 1.5g on the primary and secondary channels
and
"Let bios select transfer mode" is checked
Here is a Screenshot of it
By Thrash4u
now for my HD that is IDE, that I use for my Operating system, it has
"ULTRA DMA 5 - Ultra 100" checked
Here is a Screenshot of it
By Thrash4u
I am using SATA II cables on both burners, and one split power connection from IDI to 2 SATA power connections.
|
|
Thrash4u
Newbie
|
29. April 2008 @ 20:43 |
Link to this message
|
Here is the nero log:
][hrash
4C87-200M-4045-E10K-000X-X640-0800-3X00-0000-4072-6K9C-**** (*)
Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 7.9.6.4
Internal Version: 7, 9, 6, 4
(Nero Express)
Recorder: <TSSTcorp CDDVDW SH-S203N>Version: SB01 - HA 1 TA 0 - 7.9.6.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <SCSIVAX DVD/CD-ROM >Version: 2.7a - HA 1 TA 2 - 7.9.6.4
Adapter driver: <SCSI> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST3160023A nvatabus Port 0 ID 0 DMA: Off
CdRomPeripheral : TSSTcorp CDDVDW SH-S203N nvatabus Port 1 ID 0 DMA: Off
CdRomPeripheral : TSSTcorp CDDVDW SH-S203N nvatabus Port 1 ID 2 DMA: Off
DiskPeripheral : ST3250823AS nvatabus Port 2 ID 0 DMA: Off
DiskPeripheral : ST380817AS nvatabus Port 2 ID 2 DMA: Off
CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
TSSTcorp CDDVDW SH-S203N E: CdRom0
TSSTcorp CDDVDW SH-S203N F: CdRom1
SCSIVAX DVD/CD-ROM H: CdRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2046MB (2095536kB)
Free physical memory: 1168MB (1196724kB)
Memory in use : 42 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
27.4.2008
Audio CD
3:16:03 PM #1 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
3:16:03 PM #2 CDADOC -1 File Cdadoc.cpp, Line 1588
Audio item log info:
Audio document burn settings:
=============================
Burn mode: DAO,
CD Text: On,
Cache disk or network files: No,
Cache small files: No,
Cache files smaller than 65536 bytes.
Audio Multisession: No
List of audio tracks:
=====================
Track 01: Length: 02:22.69, Pause frames: 150, Filters: 0, Name: '01 Title Music From A Clockwork Orange.mp3'.
Track 02: Length: 05:57.23, Pause frames: 150, Filters: 0, Name: '02 The Thieving Magpie (Abridged).mp3'.
Track 03: Length: 01:48.50, Pause frames: 150, Filters: 0, Name: '03 Theme From A Clockwork Orange (Beethoviana).mp3'.
Track 04: Length: 03:53.22, Pause frames: 150, Filters: 0, Name: '04 Ninth Symphony, second movement (Abridged).mp3'.
Track 05: Length: 07:04.06, Pause frames: 150, Filters: 0, Name: '05 March From a Clockwork Orange.mp3'.
Track 06: Length: 01:22.19, Pause frames: 150, Filters: 0, Name: '06 William Tell Overture (Abridged).mp3'.
Track 07: Length: 04:34.51, Pause frames: 150, Filters: 0, Name: '07 Pomp and Circumstance March No. I.mp3'.
Track 08: Length: 01:38.23, Pause frames: 150, Filters: 0, Name: '08 Pomp and Circumstance March No. IV (Abridged).mp3'.
Track 09: Length: 04:17.32, Pause frames: 150, Filters: 0, Name: '09 Timesteps (Excerpt).mp3'.
Track 10: Length: 01:47.26, Pause frames: 150, Filters: 0, Name: '10 Overture To The Sun.mp3'.
Track 11: Length: 01:05.53, Pause frames: 150, Filters: 0, Name: '11 I Want To Marry A Lighthouse Keeper.mp3'.
Track 12: Length: 03:03.48, Pause frames: 150, Filters: 0, Name: '12 William Tell Overture (Abridged) (2).mp3'.
Track 13: Length: 03:08.12, Pause frames: 150, Filters: 0, Name: '13 Suicide Scherzo (Ninth Symphony, second movement, abridged).mp3'.
Track 14: Length: 01:37.72, Pause frames: 150, Filters: 0, Name: '14 Ninth Symphony, Fourth Movement (Abridged).mp3'.
Track 15: Length: 02:40.56, Pause frames: 150, Filters: 0, Name: '15 Singin' In the Rain.mp3'.
Total size: 46:52.37
3:16:03 PM #3 Text 0 File Burncd.cpp, Line 3196
TSSTcorp CDDVDW SH-S203N
Super Link activated
3:16:03 PM #4 Text 0 File AudioCompilationImpl.cpp, Line 838
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
3:16:03 PM #5 Text 0 File Burncd.cpp, Line 3508
Turn on Disc-At-Once, using CD-R/RW media
3:16:44 PM #6 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 359844 ( 79:59.69)
Last address to be written: 210786 ( 46:52.36)
3:16:44 PM #7 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)
3:16:44 PM #8 Text 0 File DlgWaitCD.cpp, Line 2964
Recorder: TSSTcorp CDDVDW SH-S203N;
CDR code: 00 97 15 17; OSJ entry from: Ritek Co.
ATIP Data:
Special Info [hex] 1: 00 00 00, 2: 00 00 00 (LI 0:00.00), 3: 00 00 00 (LO 0:00.00)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
3:16:44 PM #9 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Disc not writeable. Insert writeable disc.
(Medium in drive: CD-R. Medium required by compilation: CD-R/RW.)
3:16:44 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_AUDIO_NOPRE (01 Title Music From A Clockwork Orange.mp3)
2 indices, index0 (150) not provided
original disc pos #0 + 10719 (10719) = #10719/2:22.69
relocatable, disc pos for caching/writing not required/not required
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 10719 blocks [E: TSSTcorp CDDVDW SH-S203N]
1: TRM_AUDIO_NOPRE (02 The Thieving Magpie (Abridged).mp3)
2 indices, index0 (150) not provided
original disc pos #0 + 26798 (26798) = #26798/5:57.23
relocatable, disc pos for caching/writing not required/not required
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 26798 blocks [E: TSSTcorp CDDVDW SH-S203N]
2: TRM_AUDIO_NOPRE (03 Theme From A Clockwork Orange (Beethoviana).mp3)
2 indices, index0 (150) not provided
original disc pos #0 + 8150 (8150) = #8150/1:48.50
relocatable, disc pos for caching/writing not required/not required
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 8150 blocks [E: TSSTcorp CDDVDW SH-S203N]
3: TRM_AUDIO_NOPRE (04 Ninth Symphony, second movement (Abridged).mp3)
2 indices, index0 (150) not provided
original disc pos #0 + 17497 (17497) = #17497/3:53.22
relocatable, disc pos for caching/writing not required/not required
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 17497 blocks [E: TSSTcorp CDDVDW SH-S203N]
4: TRM_AUDIO_NOPRE (05 March From a Clockwork Orange.mp3)
2 indices, index0 (150) not provided
original disc pos #0 + 31806 (31806) = #31806/7:4.6
relocatable, disc pos for caching/writing not required/not required
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 31806 blocks [E: TSSTcorp CDDVDW SH-S203N]
5: TRM_AUDIO_NOPRE (06 William Tell Overture (Abridged).mp3)
2 indices, index0 (150) not provided
original disc pos #0 + 6169 (6169) = #6169/1:22.19
relocatable, disc pos for caching/writing not required/not required
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 6169 blocks [E: TSSTcorp CDDVDW SH-S203N]
6: TRM_AUDIO_NOPRE (07 Pomp and Circumstance March No. I.mp3)
2 indices, index0 (150) not provided
original disc pos #0 + 20601 (20601) = #20601/4:34.51
relocatable, disc pos for caching/writing not required/not required
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 20601 blocks [E: TSSTcorp CDDVDW SH-S203N]
7: TRM_AUDIO_NOPRE (08 Pomp and Circumstance March No. IV (Abridged).mp3)
2 indices, index0 (150) not provided
original disc pos #0 + 7373 (7373) = #7373/1:38.23
relocatable, disc pos for caching/writing not required/not required
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 7373 blocks [E: TSSTcorp CDDVDW SH-S203N]
8: TRM_AUDIO_NOPRE (09 Timesteps (Excerpt).mp3)
2 indices, index0 (150) not provided
original disc pos #0 + 19307 (19307) = #19307/4:17.32
relocatable, disc pos for caching/writing not required/not required
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 19307 blocks [E: TSSTcorp CDDVDW SH-S203N]
9: TRM_AUDIO_NOPRE (10 Overture To The Sun.mp3)
2 indices, index0 (150) not provided
original disc pos #0 + 8051 (8051) = #8051/1:47.26
relocatable, disc pos for caching/writing not required/not required
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 8051 blocks [E: TSSTcorp CDDVDW SH-S203N]
10: TRM_AUDIO_NOPRE (11 I Want To Marry A Lighthouse Keeper.mp3)
2 indices, index0 (150) not provided
original disc pos #0 + 4928 (4928) = #4928/1:5.53
relocatable, disc pos for caching/writing not required/not required
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 4928 blocks [E: TSSTcorp CDDVDW SH-S203N]
11: TRM_AUDIO_NOPRE (12 William Tell Overture (Abridged) (2).mp3)
2 indices, index0 (150) not provided
original disc pos #0 + 13773 (13773) = #13773/3:3.48
relocatable, disc pos for caching/writing not required/not required
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 13773 blocks [E: TSSTcorp CDDVDW SH-S203N]
12: TRM_AUDIO_NOPRE (13 Suicide Scherzo (Ninth Symphony, second movement, abridged).mp3)
2 indices, index0 (150) not provided
original disc pos #0 + 14112 (14112) = #14112/3:8.12
relocatable, disc pos for caching/writing not required/not required
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 14112 blocks [E: TSSTcorp CDDVDW SH-S203N]
13: TRM_AUDIO_NOPRE (14 Ninth Symphony, Fourth Movement (Abridged).mp3)
2 indices, index0 (150) not provided
original disc pos #0 + 7347 (7347) = #7347/1:37.72
relocatable, disc pos for caching/writing not required/not required
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 7347 blocks [E: TSSTcorp CDDVDW SH-S203N]
14: TRM_AUDIO_NOPRE (15 Singin' In the Rain.mp3)
2 indices, index0 (150) not provided
original disc pos #0 + 12056 (12056) = #12056/2:40.56
relocatable, disc pos for caching/writing not required/not required
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 12056 blocks [E: TSSTcorp CDDVDW SH-S203N]
--------------------------------------------------------------
3:16:44 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [E: TSSTcorp CDDVDW SH-S203N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 15: Idx 0 Idx 1 Next Trk
1: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 0 352800 25563888, ISRC ""
2: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 25563888 25916688 88945584, ISRC ""
3: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 88945584 89298384 108467184, ISRC ""
4: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 108467184 108819984 149972928, ISRC ""
5: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 149972928 150325728 225133440, ISRC ""
6: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 225133440 225486240 239995728, ISRC ""
7: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 239995728 240348528 288802080, ISRC ""
8: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 288802080 289154880 306496176, ISRC ""
9: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 306496176 306848976 352259040, ISRC ""
10: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 352259040 352611840 371547792, ISRC ""
11: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 371547792 371900592 383491248, ISRC ""
12: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 383491248 383844048 416238144, ISRC ""
13: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 416238144 416590944 449782368, ISRC ""
14: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 449782368 450135168 467415312, ISRC ""
15: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 467415312 467768112 496123824, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
-150 | lead-in | 0 | 0x01 | 0 | 0 | 0x00
-150 | 1 | 0 | 0x21 | 0 | 0 | 0x00
0 | 1 | 1 | 0x21 | 10719 | 0 | 0x00
10719 | 2 | 0 | 0x21 | 0 | 0 | 0x00
10869 | 2 | 1 | 0x21 | 26798 | 10869 | 0x00
37667 | 3 | 0 | 0x21 | 0 | 0 | 0x00
37817 | 3 | 1 | 0x21 | 8150 | 37817 | 0x00
45967 | 4 | 0 | 0x21 | 0 | 0 | 0x00
46117 | 4 | 1 | 0x21 | 17497 | 46117 | 0x00
63614 | 5 | 0 | 0x21 | 0 | 0 | 0x00
63764 | 5 | 1 | 0x21 | 31806 | 63764 | 0x00
95570 | 6 | 0 | 0x21 | 0 | 0 | 0x00
95720 | 6 | 1 | 0x21 | 6169 | 95720 | 0x00
101889 | 7 | 0 | 0x21 | 0 | 0 | 0x00
102039 | 7 | 1 | 0x21 | 20601 | 102039 | 0x00
122640 | 8 | 0 | 0x21 | 0 | 0 | 0x00
122790 | 8 | 1 | 0x21 | 7373 | 122790 | 0x00
130163 | 9 | 0 | 0x21 | 0 | 0 | 0x00
130313 | 9 | 1 | 0x21 | 19307 | 130313 | 0x00
149620 | 10 | 0 | 0x21 | 0 | 0 | 0x00
149770 | 10 | 1 | 0x21 | 8051 | 149770 | 0x00
157821 | 11 | 0 | 0x21 | 0 | 0 | 0x00
157971 | 11 | 1 | 0x21 | 4928 | 157971 | 0x00
162899 | 12 | 0 | 0x21 | 0 | 0 | 0x00
163049 | 12 | 1 | 0x21 | 13773 | 163049 | 0x00
176822 | 13 | 0 | 0x21 | 0 | 0 | 0x00
176972 | 13 | 1 | 0x21 | 14112 | 176972 | 0x00
191084 | 14 | 0 | 0x21 | 0 | 0 | 0x00
191234 | 14 | 1 | 0x21 | 7347 | 191234 | 0x00
198581 | 15 | 0 | 0x21 | 0 | 0 | 0x00
198731 | 15 | 1 | 0x21 | 12056 | 198731 | 0x00
210787 | lead-out | 1 | 0x01 | 0 | 0 | 0x00
3:16:44 PM #12 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
3:16:44 PM #13 Text 0 File Burncd.cpp, Line 4294
Caching options: cache CDRom or Network-No, small files-No (<64KB)
3:16:44 PM #14 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 48x (7,200 KB/s)
3:16:44 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (relocatable, no disc pos, no patch infos, orig at #0): write at #0
3:16:44 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #10869
3:16:44 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 2 (relocatable, no disc pos, no patch infos, orig at #0): write at #37817
3:16:44 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 3 (relocatable, no disc pos, no patch infos, orig at #0): write at #46117
3:16:44 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 4 (relocatable, no disc pos, no patch infos, orig at #0): write at #63764
3:16:44 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 5 (relocatable, no disc pos, no patch infos, orig at #0): write at #95720
3:16:44 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 6 (relocatable, no disc pos, no patch infos, orig at #0): write at #102039
3:16:44 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 7 (relocatable, no disc pos, no patch infos, orig at #0): write at #122790
3:16:44 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 8 (relocatable, no disc pos, no patch infos, orig at #0): write at #130313
3:16:44 PM #24 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 9 (relocatable, no disc pos, no patch infos, orig at #0): write at #149770
3:16:44 PM #25 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 10 (relocatable, no disc pos, no patch infos, orig at #0): write at #157971
3:16:44 PM #26 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 11 (relocatable, no disc pos, no patch infos, orig at #0): write at #163049
3:16:44 PM #27 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 12 (relocatable, no disc pos, no patch infos, orig at #0): write at #176972
3:16:44 PM #28 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 13 (relocatable, no disc pos, no patch infos, orig at #0): write at #191234
3:16:44 PM #29 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 14 (relocatable, no disc pos, no patch infos, orig at #0): write at #198731
3:16:44 PM #30 Text 0 File MMC.cpp, Line 17685
StartDAO : CD-Text - On
3:16:44 PM #31 Text 0 File MMC.cpp, Line 22363
Set BUFE: Super Link -> ON
3:16:44 PM #32 Text 0 File MMC.cpp, Line 17915
CueData, Len=256
21 00 00 41 00 00 00 00
21 01 00 00 00 00 00 00
21 01 01 00 00 00 02 00
21 02 00 00 00 02 18 45
21 02 01 00 00 02 1a 45
21 03 00 00 00 08 18 11
21 03 01 00 00 08 1a 11
21 04 00 00 00 0a 0e 43
21 04 01 00 00 0a 10 43
21 05 00 00 00 0e 0a 0e
21 05 01 00 00 0e 0c 0e
21 06 00 00 00 15 10 14
21 06 01 00 00 15 12 14
21 07 00 00 00 16 28 27
21 07 01 00 00 16 2a 27
21 08 00 00 00 1b 11 0f
21 08 01 00 00 1b 13 0f
21 09 00 00 00 1c 39 26
21 09 01 00 00 1c 3b 26
21 0a 00 00 00 21 10 46
21 0a 01 00 00 21 12 46
21 0b 00 00 00 23 06 15
21 0b 01 00 00 23 08 15
21 0c 00 00 00 24 0d 4a
21 0c 01 00 00 24 0f 4a
21 0d 00 00 00 27 13 2f
21 0d 01 00 00 27 15 2f
21 0e 00 00 00 2a 1d 3b
21 0e 01 00 00 2a 1f 3b
21 0f 00 00 00 2c 09 38
21 0f 01 00 00 2c 0b 38
01 aa 01 01 00 2e 34 25
3:16:44 PM #33 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800
3:17:11 PM #34 SPTI -1502 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1502)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x08
Sense Qual: 0x03
CDB Data: 0x2A 00 FF FF CF 24 00 02 AA 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 00 08 03
Buffer x0658c980: Len xffc0
0x20 00 00 00 00 00 01 14 1A 17 11 2C 19 12 01 0D
0x1D 17 0D 29 18 32 3E 3B 20 00 04 01 02 30 01 14
0x1A 06 14 20 15 06 21 29 19 17 19 29 1B 22 23 10
3:17:11 PM #35 CDR -1502 File Writer.cpp, Line 303
DMA-driver error, CRC error
E: TSSTcorp CDDVDW SH-S203N
3:17:44 PM #36 Phase 38 File dlgbrnst.cpp, Line 1762
Burn process failed at 48x (7,200 KB/s)
3:17:46 PM #37 Text 0 File AudioCompilationImpl.cpp, Line 863
DRM: DRM burn session terminated.
3:17:46 PM #38 Text 0 File AudioCompilationImpl.cpp, Line 892
DRM: Closing entire DRM handling. Bye.
3:17:46 PM #39 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
3:17:49 PM #40 Text 0 File Cdrdrv.cpp, Line 11185
DriveLocker: UnLockVolume completed
3:17:49 PM #41 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
ohmygawd1
Newbie
|
1. June 2008 @ 16:18 |
Link to this message
|
I'm having the exact same problem, and I too have DFI lanparty NF4 Ultra D motherboard. I have one IDE hard drive which in on a separate IDE channel from an IDE DVD burner. I also have an Optiarc AD-7191S SATA DVD burner. I cannot burn anything with the SATA burner. I get the same ?DMA-driver error, CRC error?. I have changed my IDE driver from Nvidia to Microsoft but, I still get the same error. I do have DMA turned on for the IDE hard disk (DMA mode 5).
Can anyone help? I'm at my wits end.
|
Senior Member
|
1. June 2008 @ 16:45 |
Link to this message
|
|
You haven?t got your sata drive connected to the raid sata connections have you? They are usually red connections if so change in the bios to none raid even doing that I?ve heard of people having trouble when using the raid connection
|
|
Advertisement
|
|
|
|
ohmygawd1
Newbie
|
2. June 2008 @ 19:06 |
Link to this message
|
I have RAID turned off in the bios, and I did check the drive on a another computer and it works fine. I have seen somewhere in my searches about connecting to slave instead of master SATA port. But AFAIK that is strictly an IDE concept.
My board is the Ultra-D which only has 4 SATA ports that can be configured as RAID using the Nforce chipset. Some of the other Lanparty's have an additional 4 SATA ports under the control of an Sil 3114 chipset.
I wonder if anyone is able to use an SATA DVD writer while connected to one of those SATA ports?
|
|
