|
|
|
Burn process failed at 4x (5,540 KB/s)
|
|
|
ireoi
Newbie
|
15. February 2008 @ 01:40 |
Link to this message
|
Having quite a few issues when trying to burn to these new dvds I bought. I purchased the following (3 spindles of 100 as well):
MEMOREX DVD-R 16X 4.7GB 120 MIN
I didn't have any issues with these:
MEMOREX DVD-RW 4X 4.7GB 120 MIN (burned 54 dvds)
I attached two log files to this post. The first one isn't with an updated NERO. I updated NERO and got the same error on the second burn. At this point, I don't know what else to do. There's no updated firmware for my drive. I'm using a laptop so I doubt its a cable issues. I had no problems before.
Also, I cleaned all "Roxio" programs since someone recommended it on another site. I've tried using different speeds too. My burner is capable of burning 8x but due to coasters, I lowered the speed hoping to fix the problem. Hopefully, we can find a remedy. Thank you for your time by the way.
- Reo
- - -
log #1
Quote:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 4:35:34 PM
Nero version: 6.6.0.2 (Nero Express)
Recorder: <HL-DT-ST DVD-RW GWA-4082N>Version: CC15 - HA 0 TA 1 - 6.6.0.2
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <VY5428L JEG791A >Version: 1.0 - HA 1 TA 0 - 6.6.0.2
Adapter driver: <a0zwlbm7> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHV2120AT PL atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-RW GWA-4082N atapi Port 0 ID 1 DMA: On
CdRomPeripheral : VY5428L JEG791A 1.0 a0zwlbm7 Port 1 ID 0 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST DVD-RW GWA-4082 D: CDRom0
VY5428L JEG791A E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1278MB (1309164kB)
Free physical memory: 671MB (687760kB)
Memory in use : 47 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
13.2.2008
ISO compilation
3:44:57 PM #1 Text 0 File Isodoc.cpp, Line 6168
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
3:44:57 PM #2 Text 0 File Reader.cpp, Line 127
Reader running
3:44:57 PM #3 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVD-RW GWA-4082N running
3:44:57 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
3:44:57 PM #5 Text 0 File Burncd.cpp, Line 3117
Turn on Disc-at-once, using DVD media
3:44:58 PM #6 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2276847 (505:57.72, 4446MB)
3:44:58 PM #7 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)
3:44:58 PM #8 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: HL-DT-ST DVD-RW GWA-4082N, Media type: DVD-R
Disc Manufacturer: RITEKF - 1
Disc Application Code: 64, Disc Physical Code: 193
3:44:58 PM #9 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================
3:44:58 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 844
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2276848 (2276848) = #2276848/505:57.73
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2276848 blocks [HL-DT-ST DVD-RW GWA-4082N]
--------------------------------------------------------------
3:44:58 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1047
Prepare recorder [HL-DT-ST DVD-RW GWA-4082N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4662984704, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2276848 | lead-out | 1 | 0x00 | 0x41
3:44:58 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
3:44:58 PM #13 Text 0 File Burncd.cpp, Line 4004
Cache writing successful.
3:44:58 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
3:44:58 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)
3:44:58 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2568
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
3:44:58 PM #17 Text 0 File DVDR.cpp, Line 2202
Recording mode: Sequential Recording Mode
3:44:58 PM #18 Text 0 File Mmc.cpp, Line 20869
Set BUFE: Buffer underrun protection -> ON
3:44:58 PM #19 Text 0 File DVDR.cpp, Line 2343
Start write address at LBA 0
DVD high compatibility mode: Yes
3:44:58 PM #20 Text 0 File Cdrdrv.cpp, Line 8310
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
3:45:20 PM #21 Text 0 File Cdrdrv.cpp, Line 1283
15:45:20.299 - HL-DT-ST DVD-RW GWA-4082N\H0 T1 : Queue again later
3:47:20 PM #22 SCSI -1093 File Cdrdrv.cpp, Line 1431
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0AFE0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x02 0xC2 0x40 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x10
0x3C 0x30 0x00 0x0C 0x02 0x00
3:47:20 PM #23 CDR -1093 File Writer.cpp, Line 311
No seek complete
3:47:20 PM #24 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
3:47:20 PM #25 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
3:47:21 PM #26 Text 0 File DVDR.cpp, Line 2586
EndDAO: Last written address was 180799
3:47:21 PM #27 CDR -1093 File WriterStatus.cpp, Line 167
No seek complete
3:47:21 PM #28 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
3:47:21 PM #29 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=9464 bytes, created 3/7/2007 3:51:00 PM
File 'Drivers\PXHELP20.SYS': Ver=3.00.56a, size=43528 bytes, created 3/7/2007 3:51:00 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
- - -
log #2
Quote:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 6.6.1.15
Internal Version: 6, 6, 1, 15
(Nero Express)
Recorder: <HL-DT-ST DVD-RW GWA-4082N>Version: CC15 - HA 1 TA 0 - 6.6.1.15
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <VY5428L JEG791A >Version: 1.0 - HA 1 TA 1 - 6.6.1.15
Adapter driver: <SCSI> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHV2120AT PL atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-RW GWA-4082N atapi Port 0 ID 1 DMA: On
CdRomPeripheral : VY5428L JEG791A 1.0 am2v327a Port 1 ID 0 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST DVD-RW GWA-4082N D: CDRom0
VY5428L JEG791A E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1278MB (1309164kB)
Free physical memory: 730MB (748368kB)
Memory in use : 42 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
13.2.2008
ISO compilation
4:14:57 PM #1 Text 0 File SCSIPTICommands.cpp, Line 403
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
4:14:58 PM #2 Text 0 File Isodoc.cpp, Line 6494
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
4:14:58 PM #3 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
4:14:58 PM #4 Text 0 File Burncd.cpp, Line 3316
Turn on Disc-At-Once, using DVD media
4:14:58 PM #5 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2167823 (481:44.23, 4234MB)
4:14:58 PM #6 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)
4:14:58 PM #7 Text 0 File DlgWaitCD.cpp, Line 2616
Recorder: HL-DT-ST DVD-RW GWA-4082N, Media type: DVD-R
Disc Manufacturer: RITEKF - 1
Disc Application Code: 64, Disc Physical Code: 193
4:14:58 PM #8 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
4:14:58 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 814
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2167824 (2167824) = #2167824/481:44.24
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2167824 blocks [HL-DT-ST DVD-RW GWA-4082N]
--------------------------------------------------------------
4:14:58 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1013
Prepare recorder [HL-DT-ST DVD-RW GWA-4082N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4439703552, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2167824 | lead-out | 1 | 0x41 | 0x00
4:14:58 PM #11 Text 0 File SCSIPTICommands.cpp, Line 208
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
4:14:58 PM #12 Phase 24 File dlgbrnst.cpp, Line 1685
Caching of files started
4:14:58 PM #13 Text 0 File Burncd.cpp, Line 4158
Cache writing successful.
4:14:58 PM #14 Phase 25 File dlgbrnst.cpp, Line 1685
Caching of files completed
4:14:58 PM #15 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 4x (5,540 KB/s)
4:14:58 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2717
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
4:14:59 PM #17 Text 0 File DVDR.cpp, Line 2846
Recording mode: Sequential Recording Mode
4:14:59 PM #18 Text 0 File DVDR.cpp, Line 3002
Start write address at LBA 0
DVD high compatibility mode: Yes
4:14:59 PM #19 Text 0 File Cdrdrv.cpp, Line 8737
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
4:15:20 PM #20 Text 0 File Cdrdrv.cpp, Line 1224
16:15:20.250 - D: HL-DT-ST DVD-RW GWA-4082N : Queue again later
4:16:05 PM #21 SPTI -1093 File SCSIPassThrough.cpp, Line 178
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1093)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 10 3C 30 00 0C 02
Buffer x07550040: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
4:16:05 PM #22 CDR -1093 File Writer.cpp, Line 281
No seek complete
D: HL-DT-ST DVD-RW GWA-4082N
4:16:05 PM #23 Text 0 File DVDR.cpp, Line 3246
EndDAO: Last written address was -1
4:16:07 PM #24 Phase 38 File dlgbrnst.cpp, Line 1685
Burn process failed at 4x (5,540 KB/s)
4:16:13 PM #25 Text 0 File SCSIPTICommands.cpp, Line 253
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
4:16:15 PM #26 Text 0 File Cdrdrv.cpp, Line 9945
DriveLocker: UnLockVolume completed
4:16:15 PM #27 Text 0 File SCSIPTICommands.cpp, Line 403
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=3.00.56a, size=43528 bytes, created 3/7/2007 3:51:00 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 8/10/2004 4:00:00 AM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Advertisement
|
|
|
|
AfterDawn Addict
1 product review
|
15. February 2008 @ 02:18 |
Link to this message
|
Your using X16 disc. Your burner is able to burn up to maximum X8. Without a firmware update, your drive might not be able to recognize the newer media(X16 speeds). The discs that you are using are made by Ritek- not the best out there, but not the worse either.
Quote:
Media type: DVD-R
Disc Manufacturer: RITEKF - 1
Your burner can't read them properly.
You could try and get some Verbatims, better discs, but without a firmware update, might still have same result. the best choice would probably be to get some X8 discs.
 Piss me off, and I Will ignore You! |
|
ireoi
Newbie
|
15. February 2008 @ 06:11 |
Link to this message
|
Originally posted by cyprusrom:
Your using X16 disc. Your burner is able to burn up to maximum X8. Without a firmware update, your drive might not be able to recognize the newer media(X16 speeds). The discs that you are using are made by Ritek- not the best out there, but not the worse either.
Quote:
Media type: DVD-R
Disc Manufacturer: RITEKF - 1
Your burner can't read them properly.
You could try and get some Verbatims, better discs, but without a firmware update, might still have same result. the best choice would probably be to get some X8 discs.
Aww . . .
No wonder. Thank you for the quick reply and informative feedback. Its truly appreciated. I'll try picking up a new set of discs. I got these three spindles for $75. Disappointed that I won't be able to use them considering the phenomenal price. Oh well . . .
This message has been edited since posting. Last time this message was edited on 15. February 2008 @ 06:12
|
AfterDawn Addict
1 product review
|
15. February 2008 @ 10:07 |
Link to this message
|
|
That was $75 for all three spindles, right?
Piss me off, and I Will ignore You!
|
|
Advertisement
|
|
|
|
ireoi
Newbie
|
15. February 2008 @ 15:27 |
Link to this message
|
Originally posted by cyprusrom:
That was $75 for all three spindles, right?
Yeah. 300 total DVDs. They are on sale at the moment for around 22 each.
|
|
