|
|
|
Nero express error.
|
|
|
LFH23
Newbie
|
9. April 2008 @ 04:17 |
Link to this message
|
I am presently using Nero express ver 7.10.1.0, and i am experiencing some difficulty yet to be encountered. Attached below are the screenshot and error log, please advise on the next course of action thank you. Quote:
Liong Foo How
Cleveland Cavaliers & Akron St Vincent St Mary
1C82-A0K5-19E5-MAAX-400E-C058-****
Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 7.10.1.0
Internal Version: 7, 10, 1, 0
(Nero Express)
Recorder: <SONY DVD RW DRU-720A> Version: JY08 - HA 1 TA 1 - 7.10.1.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVD-ROM GDR8162B>Version: 0015 - HA 1 TA 0 - 7.10.1.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD2500KS-00MJB0 atapi Port 2 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8162B atapi Port 3 ID 0 DMA: On
CdRomPeripheral : SONY DVD RW DRU-720A atapi Port 3 ID 1 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8162B D: CdRom0
SONY DVD RW DRU-720A E: CdRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1021MB (1046256kB)
Free physical memory: 380MB (389900kB)
Memory in use : 62 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
9.4.2008
ISO compilation
3:36:41 PM #1 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
3:36:41 PM #2 Text 0 File Isodoc.cpp, Line 6666
Iso document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
3:36:41 PM #3 ISO9660GEN -11 File Geniso.cpp, Line 3343
First writeable address = 0 (0x00000000)
3:36:41 PM #4 Text 0 File Burncd.cpp, Line 3508
Turn on Disc-At-Once, using DVD media
3:36:41 PM #5 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2292783 (509:30.33, 4478MB)
3:36:41 PM #6 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)
3:36:41 PM #7 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: SONY DVD RW DRU-720A, Media type: DVD+R
Disc Manufacturer ID: SONY, Media Type ID: D21, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7
3:36:41 PM #8 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
3:36:41 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2292784 (2292784) = #2292784/509:30.34
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2292784 blocks [E: SONY DVD RW DRU-720A]
--------------------------------------------------------------
3:36:41 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [E: SONY DVD RW DRU-720A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4695621632, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2292784 | 0 | 0x00
2292784 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
3:36:41 PM #11 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
3:36:41 PM #12 Text 0 File Burncd.cpp, Line 4294
Caching options: cache CDRom or Network-Yes, small files-Yes (<64KB)
3:36:41 PM #13 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started
3:36:41 PM #14 Text 0 File Burncd.cpp, Line 4413
Cache writing successful.
3:36:41 PM #15 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed
3:36:41 PM #16 Phase 28 File dlgbrnst.cpp, Line 1762
Speed measurement started
3:36:41 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
3:36:41 PM #18 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 590400
3:44:26 PM #19 Text 0 File WriterStatus.cpp, Line 113
<E: SONY DVD RW DRU-720A> start writing Lead-Out at LBA 2292784 (22FC30h), length 0 blocks
3:44:26 PM #20 Phase 29 File dlgbrnst.cpp, Line 1711
Speed measurement completed: 7.1x (9,880 KB/s)
3:44:26 PM #21 Text 0 File Burncd.cpp, Line 4487
Can only write at 8x instead of 16x,
because speed of source data is too slow
3:44:26 PM #22 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 8x (11,080 KB/s)
3:44:26 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
3:44:26 PM #24 Text 0 File Cdrdrv.cpp, Line 9872
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: SONY....
Media type ID: D21
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 53 4F 4E 59 00 - 00 00 00 44 32 31 00 38 ...SONY....D21.8
23 54 37 14 00 28 6E 00 - 80 69 17 19 0C 0C 0A 0B #T7..(n..i......
01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................
3:44:26 PM #25 Text 0 File DVDR.cpp, Line 7098
Drive: SONY DVD RW DRU-720A
Book Type request [LO], rev 1: DVD-ROM
Changing the Book Type was finished successfully, return code 0
3:44:26 PM #26 CDR -1207 File DVDR.cpp, Line 6477
Book Type automatically set to: DVD-ROM
3:44:26 PM #27 Text 0 File DVDPlusRW.cpp, Line 675
Start write address at LBA 0
DVD high compatibility mode: Yes
3:44:26 PM #28 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800
3:45:44 PM #29 SPTI -1106 File SCSIPassThrough.cpp, Line 179
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1106)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 73 03
Buffer x09a80040: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
3:45:44 PM #30 CDR -1106 File Writer.cpp, Line 303
Power calibration error
E: SONY DVD RW DRU-720A
3:45:45 PM #31 Phase 127 File dlgbrnst.cpp, Line 1762
Generating DVD high compatibility borders
3:45:45 PM #32 Text 0 File DVDPlusRW.cpp, Line 935
EndDAO: Last written address 0
3:45:45 PM #33 Phase 129 File dlgbrnst.cpp, Line 1762
Generating DVD borders completed successfully
3:45:46 PM #34 Text 0 File DVDR.cpp, Line 7098
Drive: SONY DVD RW DRU-720A
Book Type request [LO], rev 1: DVD+R
Changing the Book Type was finished successfully, return code 0
3:45:47 PM #35 Phase 38 File dlgbrnst.cpp, Line 1762
Burn process failed at 8x (11,080 KB/s)
3:45:47 PM #36 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
3:45:50 PM #37 Text 0 File Cdrdrv.cpp, Line 11185
DriveLocker: UnLockVolume completed
3:45:50 PM #38 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Advertisement
|
 |
|
|
AfterDawn Addict
|
9. April 2008 @ 09:49 |
Link to this message
|
Quote:
WinAspi: -
no aspi layer? try this, version 4.71 from here - http://www.afterdawn.com/software/cdr_software/cdr_tools/aspi.cfm
Quote:
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2292783 (509:30.33, 4478MB)
that's pretty close to the edge of your disk...... adjust the recording to no more than 4400MB.
Quote:
3:44:26 PM #21 Text 0 File Burncd.cpp, Line 4487
Can only write at 8x instead of 16x,
because speed of source data is too slow
3:44:26 PM #22 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 8x (11,080 KB/s)
this shows that your disk is in question here! I wouldn't burn at 16x unless it's a Taiyo Yuden disk...... and you are using a Sony Disk.... Sony outsouces their disks to different manufactures and I would use Verbatim or Taiyo Yuden (my choice of disks) better than Sony media.
Quote:
3:45:44 PM #30 CDR -1106 File Writer.cpp, Line 303
Power calibration error
E: SONY DVD RW DRU-720A
usually a POWER CALIBRATION ERROR refers to not liking the media used! and the quote before this proves it! change to better media as stated above! You should have better luck then.
|
|
LFH23
Newbie
|
9. April 2008 @ 21:17 |
Link to this message
|
Ihoe, before responding to your post. I had already attempted several solutions listed elsewhere in other reputable forums. Mainly one of them is actually dismantling the dvd-writer and cleaning the lens - which i found it to be perfectly sanitized. After re-assembling it, i'd tried reading movie dvd-roms but my attempt seemed futile. The dvd-writer would not read the dvd-rom, not even changing it's original hardware address block to the information on the disc. Strangely though, my writer is still able to read from music cd-roms and dvd-roms previously burnt using the sony dru-720a writer. Finally, what does having a ASPI driver provides and may i know besides verbatim and taiyo yuden which are the commerical brands of dvd/cd-roms which are much more compatible for smooth writing on?
|
AfterDawn Addict
|
9. April 2008 @ 22:57 |
Link to this message
|
here is another response about POWER CALIBRATION ERRORS:
<9>I have a Power calibration error?
Options you can try with "power calibration errors"
o Try another brand of DVD-/+R or DVD-/+RW media. This is the most common cause of OPC errors.
o "Slow down your burning speed".
o Update the firmware of your recorder. Check the manufacturer's website for the latest version.
o Check your power connectors, loose connections do occur. Don't share power with other devices. It needs its own power connector. If the errors occurs with an external recorder, Check the USB cable and connections.
o Try different configurations, such as taking the DVD-ROM to the primary IDE bus as slave and have only the recorder connected to the secondary IDE bus as master.
o Clean or have your DVD burner serviced. There are cleaning kits available. Sometimes just a gentle appplication of canned air can remove dust blocking the laser.
o Replace the DVD burner.
lets hope we don't need to do the last one :-)
this advice found here:
http://forums.afterdawn.com/thread_view.cfm/183136
Using good media is very important.... stops many errors from happening to begin with..... and if you are using good media and still having a problem...... you can count out your media as being the problem! here is a media guide for you:
http://www.digitalfaq.com/media/dvdmedia.htm
this guide is not without it's faults.... TDK should not be in First Class ....it's second class at best! I strictly use Taiyo Yuden, DVD+R, 8x white inkjet hub printables or the Silver printables. You can find them at Supermediastore.com, Rima.com, Meritline.com and other online stores. If I have to I will use Verbatim (made in Taiwan/Singapore) 8x +Rs. these are more readily found in stores, although the 16x are more prominent. I don't like the 16x media because my drives love the 8x media better.
and you can read about ASPI layer here:
http://www.afterdawn.com/guides/archive/aspisetup.cfm
good luck!
|
AfterDawn Addict
|
10. April 2008 @ 01:34 |
Link to this message
|
Originally posted by LFH23:
Ihoe, before responding to your post. I had already attempted several solutions listed elsewhere in other reputable forums. Mainly one of them is actually dismantling the dvd-writer and cleaning the lens - which i found it to be perfectly sanitized. After re-assembling it, i'd tried reading movie dvd-roms but my attempt seemed futile. The dvd-writer would not read the dvd-rom, not even changing it's original hardware address block to the information on the disc. Strangely though, my writer is still able to read from music cd-roms and dvd-roms previously burnt using the sony dru-720a writer. Finally, what does having a ASPI driver provides and may i know besides verbatim and taiyo yuden which are the commerical brands of dvd/cd-roms which are much more compatible for smooth writing on?
sounds like a dyeing drive to me...
Nothing here to see, move along folks.
 |
|
LFH23
Newbie
|
11. April 2008 @ 13:32 |
Link to this message
|
After heeding all your guides, nothing seems to bypass the 'power calibration error' issue. Firstly, i have upgraded nero 7 to nero 8, secondly, tried to lower the burning speed to 6x. Thirdly, cleaned the lens of the writer. Fourthly, updated the firmware revision to the latest. In addition, i have experimented with burning of dvd+/-rw which turned out successful. But still unable to write on my SONYD21 discs. Please enlighten me on what' the next best logical step thank you.
|
AfterDawn Addict
|
11. April 2008 @ 13:53 |
Link to this message
|
Quote:
sounds like a dyeing drive to me...
I second Rotary's findings!
|
|
LFH23
Newbie
|
12. April 2008 @ 23:41 |
Link to this message
|
|
Besides changing to a new dvd-writer, are there other last ditch attempt to revive my dvd-writer? If not could both of you guys recommend me a reliable yet renowned dvd-writer manufacturer which i would avoid seeing the 'power calibration error' issue thank you
|
AfterDawn Addict
|
13. April 2008 @ 05:25 |
Link to this message
|
|
can you write to dvdRW ok?
i have lite-on been the bomb for me...
Nothing here to see, move along folks.
This message has been edited since posting. Last time this message was edited on 13. April 2008 @ 05:30
|
|
LFH23
Newbie
|
13. April 2008 @ 09:30 |
Link to this message
|
yes, rotary i could write to my dvd+rw. But i could still not write to the SONYD21 media that i have. I have also tried changing configurations to PATA secondary master drive, yet still experience the same setback of 'power calibration error'. I am really at my wits end trying to solve this nuisance of mine. Please kindly advise on the situation, greatly appreciate all your time and effort.
|
AfterDawn Addict
|
13. April 2008 @ 12:40 |
Link to this message
|
if you can write to a dvd RW then drive must be ok, change to a different disc than sony and try again...
even different disc and different burning app even...
Nothing here to see, move along folks.
|
AfterDawn Addict
|
13. April 2008 @ 18:47 |
Link to this message
|
again.....
Originally posted by IHoe:
here is another response about POWER CALIBRATION ERRORS:
<9>I have a Power calibration error?
Options you can try with "power calibration errors"
o Try another brand of DVD-/+R or DVD-/+RW media. This is the most common cause of OPC errors.
o "Slow down your burning speed".
o Update the firmware of your recorder. Check the manufacturer's website for the latest version.
o Check your power connectors, loose connections do occur. Don't share power with other devices. It needs its own power connector. If the errors occurs with an external recorder, Check the USB cable and connections.
o Try different configurations, such as taking the DVD-ROM to the primary IDE bus as slave and have only the recorder connected to the secondary IDE bus as master.
o Clean or have your DVD burner serviced. There are cleaning kits available. Sometimes just a gentle appplication of canned air can remove dust blocking the laser.
o Replace the DVD burner.
lets hope we don't need to do the last one :-)
this advice found here:
http://forums.afterdawn.com/thread_view.cfm/183136
Using good media is very important.... stops many errors from happening to begin with..... and if you are using good media and still having a problem...... you can count out your media as being the problem! here is a media guide for you:
http://www.digitalfaq.com/media/dvdmedia.htm
this guide is not without it's faults.... TDK should not be in First Class ....it's second class at best! I strictly use Taiyo Yuden, DVD+R, 8x white inkjet hub printables or the Silver printables. You can find them at Supermediastore.com, Rima.com, Meritline.com and other online stores. If I have to I will use Verbatim (made in Taiwan/Singapore) 8x +Rs. these are more readily found in stores, although the 16x are more prominent. I don't like the 16x media because my drives love the 8x media better.
and you can read about ASPI layer here:
http://www.afterdawn.com/guides/archive/aspisetup.cfm
good luck!
|
|
Advertisement
|
|
|
|
LFH23
Newbie
|
14. April 2008 @ 10:38 |
Link to this message
|
May i know how do i change the secondary IDE channel slave drive - my sony dru-720a to primary? My bios do not seem to recognize my dvd-writer even though it is the only drive connected to secondary ide channel.
|
|
