|
|
|
shrink working fine, stops before nero can burn
|
|
|
wishful03
Newbie
|
30. April 2008 @ 18:28 |
Link to this message
|
She was working fine just a few days ago. Now, I go to copy a DVD, and it will write to the harddrive without a hiccup. Then, once I load the CD, it thinks about it for a minute or so, then gives me this error (log below):
--
--
xxxx-xxxx-xxxx-xxxx-xxxx-xxxx
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes,
created 10/26/2004 12:35:32 PM
Nero API version: 6.6.0.15
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 15e
Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A101 - HA 0 TA 0 - 6.6.0.15
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITE-ON CD-ROM LTN-489S atapi Port 0 ID 1 DMA: On
DiskPeripheral : ST3200826AS atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4163B E: CDRom0
LITE-ON CD-ROM LTN-489S F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 73400320 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 501MB (513808kB)
Free physical memory: 193MB (197804kB)
Memory in use : 61 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
30.4.2008
NeroAPI
5:17:01 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
5:17:01 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
5:17:01 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
5:17:01 PM #4 Text 0 File Reader.cpp, Line 127
Reader running
5:17:01 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
5:17:01 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
5:17:01 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
5:17:01 PM #8 Text 0 File Burncd.cpp, Line 3231
Turn on Disc-At-Once, using DVD media
5:17:26 PM #9 Text 0 File DlgWaitCD.cpp, Line 267
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1909775 (424:23.50, 3730MB)
5:17:26 PM #10 Text 0 File DlgWaitCD.cpp, Line 279
Write in overburning mode: NO
5:17:26 PM #11 Text 0 File DlgWaitCD.cpp, Line 2457
Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Disc Application Code: 64, Disc Physical Code: 193
5:17:26 PM #12 Text 0 File DlgWaitCD.cpp, Line 445
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD-
RAM, DVD+R DL.)
5:17:26 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1909776 (1909776) = #1909776/424:23.51
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1909776 blocks [HL-DT
-ST DVDRAM GSA-4163B]
--------------------------------------------------------------
5:17:26 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3911221248, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1909776 | lead-out | 1 | 0x41 | 0x00
5:17:26 PM #15 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
5:17:26 PM #16 Text 0 File Burncd.cpp, Line 4116
Cache writing successful.
5:17:26 PM #17 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
5:17:26 PM #18 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 16x (22,160 KB/s)
5:17:26 PM #19 SCSI -1080 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x0B6C5200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x00
CDB Data: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x00 0x00 0x02 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x3A 0x00
5:17:26 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write
at #0
5:18:26 PM #21 CDR -1066 File ThreadedTransferInterface.cpp, Line 1733
Invalid field in command
HL-DT-ST DVDRAM GSA-4163B\H0 T0
5:18:26 PM #22 TRANSFER -35 File ThreadedTransferInterface.cpp, Line 1733
Invalid track info
5:18:27 PM #23 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 16x (22,160 KB/s)
5:18:27 PM #24 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
5:18:27 PM #25 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created
8/18/2001 12:07:32 AM
File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.188 , size=24832 bytes, created 11/10/2004 8:30:18 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.26a, size=20576 bytes, created 5/12/2005 10:54:10 PM
(Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
--
--
Any ideas???? I had thought it might be NERO, but I wasn't having any problems up until yesterday... Did my laser/writer just up and die?
This message has been edited since posting. Last time this message was edited on 1. May 2008 @ 07:31
|
|
Advertisement
|
|
|
|
AfterDawn Addict
|
30. April 2008 @ 23:41 |
Link to this message
|
|
AfterDawn Addict
|
1. May 2008 @ 10:41 |
Link to this message
|
Originally posted by gwendolin:
Quote:
1A20-0316-0010-2522-xxxx xxxx
Edit out your serial number before someone pirates it
Quote:
Nero API version: 6.6.0.15
Later version is available, download from here, BOTH packages
Package 1:
http://www.dvdplusvideo.com/Nero-6.6.0.18_no_yt.exe
Package 2:
http://www.dvdplusvideo.com/NVE-3.1.0.21_no_yt.exe
Although you are using good quality discs, Verbatim I would recommend slowing your burn to around 6X to 8X
also burn at 6x
and
uninstall thr conflicting roxio driver, use roxioZAP
also#
try a different dvdr it may have been written to/coastered?
Nothing here to see, move along folks.
 This message has been edited since posting. Last time this message was edited on 1. May 2008 @ 10:45
|
|
wishful03
Newbie
|
2. May 2008 @ 23:04 |
Link to this message
|
Thanks for the warning on the serial #. That one slipped right by me.
I went ahead and tried the suggestions, and nothing seemed to quite work. So, I went ahead and bought a new drive and stuck it in... and problem solved. Sigh. I guess I just finally burned out the DVD writing laser. At least the last straw that broke the camels back was a copy of DVDs about my Grandpa's life given out to the family...
This message has been edited since posting. Last time this message was edited on 3. May 2008 @ 00:26
|
AfterDawn Addict
|
3. May 2008 @ 01:07 |
Link to this message
|
|
nice one - what drive did ya go for? internal or ext?
Nothing here to see, move along folks.
|
|
wishful03
Newbie
|
3. May 2008 @ 01:16 |
Link to this message
|
I went for an internal, Pioneer 40x. Just got it in. Now I have a new baffling problem (that seems unrelated to the burner...), but I think that'll warrant a new thread. Sigh!
|
AfterDawn Addict
|
3. May 2008 @ 01:44 |
Link to this message
|
|
shoot - wassup?
Nothing here to see, move along folks.
|
|
wishful03
Newbie
|
3. May 2008 @ 02:00 |
Link to this message
|
Well, I just started the thread here:
http://forums.afterdawn.com/thread_view.cfm/660274
Basically, I know it isn't a problem with the new burner (I checked the first disc I ran off it to make sure it worked, which it did)... But, it's happening with two different DVDs I want to copy, which baffles me. Never had this happen before.
|
|
wishful03
Newbie
|
3. May 2008 @ 02:40 |
Link to this message
|
Uhhh, I think the recommended later versions have now screwed up my burning for some reason... The burned DVDs aren't working on my DVD player (but working on the computer fine) since I put them on one of my computers.
Help? Can I go back to what I originally had... or do I even need to? Is there some weird setting that is awry? I'm not getting any burn errors, but my DVD player isn't recognizing the discs anymore.
|
AfterDawn Addict
|
3. May 2008 @ 03:12 |
Link to this message
|
It will NOT be the fault of your burning app...have you recently changed your discs, like have you just started a new bundle...changed the format (say from +R to-R)..or changed brands.
This version of Nero 6....6.6.0.18 is poosibly the BEST version they released.
|
|
wishful03
Newbie
|
3. May 2008 @ 03:24 |
Link to this message
|
Nope, I haven't changed discs - still pulling from the same bundle I was right before the chance. I haven't changed the write speed, or anything of how it is burning... Just opening with Shrink, ripping to the hard drive, then setting Nero to burn. Only now, my DVD player is hanging up on it and not recognizing anything.
Tried now to go back and copy several discs that worked fine before I ran the update, so I'm a little baffled as to what has changed. Just removed the Roxio conflicting stuff, updated the Nero... and then all the discs since then will work on the computer, but not the DVD player...
Ideas????
|
AfterDawn Addict
|
3. May 2008 @ 03:32 |
Link to this message
|
have you set pal or ntsc? since update check your options out
Nothing here to see, move along folks.
This message has been edited since posting. Last time this message was edited on 3. May 2008 @ 03:33
|
|
wishful03
Newbie
|
3. May 2008 @ 08:21 |
Link to this message
|
Alright, I'm not exactly a burning newb, but you've stumped me there. My DVD player should use NTSC format (right?), so where in Nero and/or Shrink do I have an option of changing NTSC/PAL settings????? And, what should they be on????
I am running DVD43 in the background, though, so shouldn't that remove region coding anyway...? (These discs should be coded for the US anyway - so I'm thinking this is some sort of a changed setting in Nero... but again, I'm still stumped.)
Update: Checked here and didn't see my specific pioneer burner listed, but all of them seemed compatible with DVD-Rs, so it shouldn't be a disc problem (plus I burned a DVD fine right off the bat from the same bundle I'm pulling from now, before the updates)...
I went into my nerohistory file and pulled the last logfile. Again, I had no errors, so I don't know if it'll help:
--
--
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero API version: 6.6.1.15
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 1, 15
Recorder: <PIONEER DVR-113NP> Version: 1.00 - HA 1 TA 0 - 6.6.1.15
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
=== Scsi-Device-Map ===
CdRomPeripheral : PIONEER DVR-113NP atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITE-ON CD-ROM LTN-489S atapi Port 0 ID 1 DMA: On
DiskPeripheral : ST3200826AS atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
PIONEER DVR-113NP E: CDRom0
LITE-ON CD-ROM LTN-489S F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 73400320 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 501MB (513808kB)
Free physical memory: 314MB (322304kB)
Memory in use : 37
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
3.5.2008
NeroAPI
3:11:42 AM #1 Phase 112 File APIProgress.cpp, Line 275
DVD-Video files reallocation started
3:11:42 AM #2 Phase 114 File APIProgress.cpp, Line 275
DVD-Video files reallocation completed (no file modified)
3:11:42 AM #3 Phase 111 File APIProgress.cpp, Line 275
DVD-Video files sorted
3:11:42 AM #4 Text 0 File SCSIPTICommands.cpp, Line 403
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
3:11:44 AM #5 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
3:11:44 AM #6 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
3:11:44 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
3:11:44 AM #8 Text 0 File Burncd.cpp, Line 3316
Turn on Disc-At-Once, using DVD media
3:14:01 AM #9 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1420575 (315:41.00, 2774MB)
3:14:01 AM #10 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO
3:14:01 AM #11 Text 0 File DlgWaitCD.cpp, Line 2616
Recorder: PIONEER DVR-113NP, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Disc Application Code: 64, Disc Physical Code: 193
3:14:01 AM #12 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD R/RW, DVD DL, ram.cfm" class="forum_link" target="_blank">DVD-RAM.)
3:14:01 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 814
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1420576 (1420576) = #1420576/315:41.1
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1420576 blocks [PIONEER DVR-113NP ]
--------------------------------------------------------------
3:14:02 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1013
Prepare recorder [PIONEER DVR-113NP] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2909339648, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1420576 | lead-out | 1 | 0x41 | 0x00
3:14:02 AM #15 Text 0 File SCSIPTICommands.cpp, Line 208
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
3:14:02 AM #16 Phase 24 File APIProgress.cpp, Line 275
Caching of files started
3:14:02 AM #17 Text 0 File Burncd.cpp, Line 4158
Cache writing successful.
3:14:02 AM #18 Phase 25 File APIProgress.cpp, Line 275
Caching of files completed
3:14:02 AM #19 Phase 36 File APIProgress.cpp, Line 275
Burn process started at 16x (22,160 KB/s)
3:14:02 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2717
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
3:14:02 AM #21 Text 0 File DVDR.cpp, Line 2846
Recording mode: Sequential Recording Mode
3:14:02 AM #22 Text 0 File DVDR.cpp, Line 3002
Start write address at LBA 0
DVD high compatibility mode: Yes
3:14:02 AM #23 SPTI -1066 File SCSIPassThrough.cpp, Line 178
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
Buffer x0c673a00: Len x648
3:14:02 AM #24 Text 0 File Cdrdrv.cpp, Line 8737
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
3:19:12 AM #25 Text 0 File WriterStatus.cpp, Line 113
<PIONEER DVR-113NP > start writing Lead-Out at LBA 1420576 (15AD20h), length 0 blocks
3:19:12 AM #26 Text 0 File DVDR.cpp, Line 3246
EndDAO: Last written address was 1420575
3:19:20 AM #27 Phase 37 File APIProgress.cpp, Line 275
Burn process completed successfully at 16x (22,160 KB/s)
3:19:21 AM #28 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
3:19:21 AM #29 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
3:19:21 AM #30 Text 0 File SCSIPTICommands.cpp, Line 253
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
3:19:26 AM #31 Text 0 File Cdrdrv.cpp, Line 9945
DriveLocker: UnLockVolume completed
3:19:26 AM #32 Text 0 File SCSIPTICommands.cpp, Line 403
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/18/2001 12:07:32 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.26a, size=20576 bytes, created 5/12/2005 10:54:10 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
This message has been edited since posting. Last time this message was edited on 3. May 2008 @ 08:46
|
|
wishful03
Newbie
|
3. May 2008 @ 10:03 |
Link to this message
|
I also tried writing with ImgBurn, and the DVD still plays back fine on the computer, won't work on the DVD player. Img's log looked like this:
--
--
I 09:19:53 ImgBurn Version 2.4.1.0 started!
I 09:19:53 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 2)
I 09:19:53 Total Physical Memory: 513,808 KB - Available: 210,408 KB
W 09:19:53 Drive D:\ (FAT32) does not support single files > 4 GB in size.
W 09:19:54 DVD43 can interfere with ImgBurn's ability to verify accurately, please ensure it's disabled!
I 09:19:54 Initialising SPTI...
I 09:19:54 Searching for SCSI / ATAPI devices...
I 09:19:54 Found 1 CD-ROM and 1 DVD±RW/RAM!
I 09:23:48 Operation Started!
I 09:23:48 Source Device: [0:0:0] PIONEER DVR-113NP 1.00 (E:) (ATA)
I 09:23:48 Source Media Type: DVD-ROM
I 09:23:48 Source Media Sectors: 1,909,526 (Track Path: PTP)
I 09:23:48 Source Media Size: 3,910,709,248 bytes
I 09:23:48 Source Media Volume Identifier: CARMEN_ELECTRA
I 09:23:48 Source Media Volume Set Identifier: 2f5ba5b6
I 09:23:48 Source Media Implementation Identifier: Daikin U.S. Comtec Lab
I 09:23:48 Source Media File System(s): ISO9660, UDF (1.02)
I 09:23:48 Read Speed (Data/Audio): MAX / 8x
I 09:23:48 Destination File: C:\CARMEN_ELECTRA.ISO
I 09:23:48 Destination Free Space: 76,244,103,168 bytes (74,457,132 KB) (72,712 MB) (71 GB)
I 09:23:48 Destination File System: NTFS
I 09:23:48 File Splitting: Auto
I 09:23:49 Reading Session 1 of 1... (1 Track, LBA: 0 - 1909525)
I 09:23:49 Reading Track 1 of 1... (MODE1/2048, LBA: 0 - 1909525)
I 09:28:14 Exporting Graph Data...
I 09:28:14 Graph Data File: C:\Documents and Settings\Owner\Application Data\ImgBurn\Graph Data Files\PIONEER_DVR-113NP_1.00_SATURDAY-MAY-03-2008_9-23_AM_N-A.ibg
I 09:28:14 Export Successfully Completed!
I 09:28:14 Operation Successfully Completed! - Duration: 00:04:25
I 09:28:14 Average Read Rate: 14,411 KB/s (10.4x) - Maximum Read Rate: 22,466 KB/s (16.2x)
I 09:29:41 Operation Started!
I 09:29:41 Source File: C:\CARMEN_ELECTRA.ISO
I 09:29:41 Source File Sectors: 1,909,526 (MODE1/2048)
I 09:29:41 Source File Size: 3,910,709,248 bytes
I 09:29:41 Source File Volume Identifier: CARMEN_ELECTRA
I 09:29:41 Source File Volume Set Identifier: 2f5ba5b6
I 09:29:41 Source File Implementation Identifier: Daikin U.S. Comtec Lab
I 09:29:41 Source File File System(s): ISO9660, UDF (1.02)
I 09:29:41 Destination Device: [0:0:0] PIONEER DVR-113NP 1.00 (E:) (ATA)
I 09:29:41 Destination Media Type: DVD-R (Disc ID: MCC 03RG20) (Speeds: 4x, 8x, 10x, 12x, 16x)
I 09:29:41 Destination Media Sectors: 2,297,888
I 09:29:41 Write Mode: DVD
I 09:29:41 Write Type: DAO
I 09:29:41 Write Speed: 4x
I 09:29:41 Link Size: Auto
I 09:29:41 Test Mode: No
I 09:29:41 OPC: No
I 09:29:41 BURN-Proof: Enabled
I 09:29:42 Filling Buffer... (20 MB)
I 09:29:43 Writing LeadIn...
I 09:30:22 Writing Session 1 of 1... (1 Track, LBA: 0 - 1909525)
I 09:30:22 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 1909525)
I 09:42:46 Synchronising Cache...
I 09:43:07 Exporting Graph Data...
I 09:43:07 Graph Data File: C:\Documents and Settings\Owner\Application Data\ImgBurn\Graph Data Files\PIONEER_DVR-113NP_1.00_SATURDAY-MAY-03-2008_9-29_AM_MCC_03RG20_4x.ibg
I 09:43:07 Export Successfully Completed!
I 09:43:07 Operation Successfully Completed! - Duration: 00:13:25
I 09:43:07 Average Write Rate: 5,133 KB/s (3.7x) - Maximum Write Rate: 5,592 KB/s (4.0x)
I 09:43:07 Cycling Tray before Verify...
W 09:43:15 Waiting for device to become ready...
I 09:43:33 Device Ready!
I 09:43:36 Operation Started!
I 09:43:36 Source Device: [0:0:0] PIONEER DVR-113NP 1.00 (E:) (ATA)
I 09:43:36 Source Media Type: DVD-R (Book Type: DVD-R) (Disc ID: MCC 03RG20) (Speeds: 4x, 8x, 10x, 12x, 16x)
I 09:43:36 Image File: C:\CARMEN_ELECTRA.ISO
I 09:43:36 Image File Sectors: 1,909,526 (MODE1/2048)
I 09:43:36 Image File Size: 3,910,709,248 bytes
I 09:43:36 Image File Volume Identifier: CARMEN_ELECTRA
I 09:43:36 Image File Volume Set Identifier: 2f5ba5b6
I 09:43:36 Image File Implementation Identifier: Daikin U.S. Comtec Lab
I 09:43:36 Image File File System(s): ISO9660, UDF (1.02)
I 09:43:36 Read Speed (Data/Audio): MAX / MAX
I 09:43:37 Verifying Session 1 of 1... (1 Track, LBA: 0 - 1909525)
I 09:43:37 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 1909525)
I 09:50:05 Exporting Graph Data...
I 09:50:05 Graph Data File: C:\Documents and Settings\Owner\Application Data\ImgBurn\Graph Data Files\PIONEER_DVR-113NP_1.00_SATURDAY-MAY-03-2008_9-29_AM_MCC_03RG20_4x.ibg
I 09:50:05 Export Successfully Completed!
I 09:50:05 Operation Successfully Completed! - Duration: 00:06:28
I 09:50:05 Average Verify Rate: 9,842 KB/s (7.1x) - Maximum Verify Rate: 17,961 KB/s (13.0x)
|
AfterDawn Addict
|
3. May 2008 @ 14:28 |
Link to this message
|
ok to recap you rip originals with dvd42 and dvd shrink to iso
then burn iso with nero and imgburn and both apps allow play on pc but not standalone?
have you changed media lately or is your standalone giving up? have you tried any other standalone players yet?
pal or ntsc thing is prolly ok then as your only useing nero/imburn for burning not encoding.
---------------------
also region isnt the same as pal or ntsc, regions go from 1 to 9 i think
Nothing here to see, move along folks.
This message has been edited since posting. Last time this message was edited on 3. May 2008 @ 14:53
|
|
wishful03
Newbie
|
3. May 2008 @ 14:47 |
Link to this message
|
Yes, that summary is correct. No, I haven't changed the media - still drawing from the same huge bundle and haven't had a problem with any discs before yesterday... Just have had the problem since the Roxio cleaner / Nero updates.
The DVD player is still playing everything that was burned before those updates fine.
Haven't tried another standalone yet, but I will later this afternoon probably.
Any ideas, other than get a new DVD player???
|
AfterDawn Addict
|
3. May 2008 @ 15:06 |
Link to this message
|
ok in that case i would just re check dvd shrink settings and dvd43
maybe for region made to region free etc.
hmm have you tried re ripping a dvd that does play? as it could just be the latest dvd you ripped needs more work done to it like fixvts or vobblanker to be used on it, as some later dvds need help now! shrink alone is no good!
do you rip main movie only?
Nothing here to see, move along folks.
|
|
Advertisement
|
|
|
|
wishful03
Newbie
|
3. May 2008 @ 17:27 |
Link to this message
|
Yes, I tried ripping and burning a DVD that previously worked fine - and the newly burned disc wouldn't play on the DVD player, so I don't think this is an encoding problem.
I tried playing the discs on an Xbox 360, and that seemed to read them. I'm still hunting down another standalone DVD player to try the new burns on. Though I can't imagine why my regular DVD player just suddenly stopped reading what I burn, especially the same disc I did just yesterday that worked just fine...
The region control in my Nero says "RPC II", and region code "None". That ok? And where else should I be looking for features that need editting?
|
|
