|
|
|
Unable to burn BD-R discs
|
|
|
flamefox
Newbie
|
25. May 2008 @ 15:17 |
Link to this message
|
Hi,
Hope someone can help with this.
I've got a LG GGW-H20L drive and am using Verbatim BD-R printables. Whenever I try to burn a BD-R disc the program will sit there saying writing to disc in the bottom left corner and nothing at all appears in the progress bars. After about 4-5 minutes I get 'Logical unit not ready, operation in progress' and 'Could not perform start of Disc-at-once' errors - i've included the log below.
The discs are from a pack of ten blank BD-R discs and the first disc I did worked fine (this was about a month ago) but I've now got three coasters because of this error. The Verbatim BD-RE disc that came with the drive burns fine.
The drive has the latest firmware installed (YL03) and i'm using the latest version of Nero (8.3.2.1). I've also tried uninstalling Nero with the CleanTool and then re-installing but still get the same error.
Anyone got any ideas about this?
Thanks
-----
Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 8.3.2.1
Internal Version: 8, 3, 2, 1
Recorder: <HL-DT-ST BD-RE GGW-H20L>Version: YL03 - HA 1 TA 0 - 8.3.2.1
Adapter driver: <Serial ATA> HA 1
Drive buffer : 2048kB
Bus Type : default
CD-ROM: <HL-DT-ST BD-RE GGW-H20L >Version: YL03 - HA 1 TA 0 - 8.3.2.1
Adapter driver: <Serial ATA> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : SAMSUNG HD501LJ atapi Port 2 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST BD-RE GGW-H20L atapi Port 5 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST BD-RE GGW-H20L D: CdRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2046MB (2095532kB)
Free physical memory: 1471MB (1507244kB)
Memory in use : 28 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
25.5.2008
UDF compilation
20:01:15 #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
20:01:15 #2 Text 0 File Isodoc.cpp, Line 6713
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : pure
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
20:01:15 #3 Text 0 File Burncd.cpp, Line 3568
Turn on Disc-At-Once, using Blu-ray Disc media
20:01:15 #4 Text 0 File FilesystemSettingsValidator.cpp, Line 142
FS Settings: using validator 'CUDFSettingsValidatorBD'
ParamMode = 'automatic', changing UDF partition type from 'physical' to 'physical'
Changing UDF revision from '1.02' to '1.02'
20:01:16 #5 Text 0 File DlgWaitCD.cpp, Line 311
Last possible write address on media: 11836863 (2630:24.63, 23118MB)
Last address to be written: 11836863 (2630:24.63, 23118MB)
20:01:16 #6 Text 0 File DlgWaitCD.cpp, Line 323
Write in overburning mode: NO (enabled: CD)
20:01:16 #7 Text 0 File DlgWaitCD.cpp, Line 2932
Recorder: HL-DT-ST BD-RE GGW-H20L, Media type: BD-R (seq)
20:01:16 #8 Text 0 File DlgWaitCD.cpp, Line 497
>>> Protocol of DlgWaitCD activities: <<<
=========================================
20:01:16 #9 Text 0 File ThreadedTransferInterface.cpp, Line 754
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 11836864 (11836864) = #11836864/2630:24.64
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 11836864 blocks [D: HL-DT-ST BD-RE GGW-H20L]
--------------------------------------------------------------
20:01:16 #10 Text 0 File ThreadedTransferInterface.cpp, Line 956
Prepare [D: HL-DT-ST BD-RE GGW-H20L] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 24241897472, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 11836864 | 0 | 0x00
11836864 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
20:01:16 #11 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
20:01:16 #12 Text 0 File Burncd.cpp, Line 4359
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
20:01:16 #13 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started
20:01:16 #14 Text 0 File Burncd.cpp, Line 4481
Cache writing successful.
20:01:16 #15 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed
20:01:16 #16 Phase 36 File dlgbrnst.cpp, Line 1767
Burn process started at 4x (17,980 KB/s)
20:01:16 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2673
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
20:01:16 #18 Text 0 File Cdrdrv.cpp, Line 10164
---- Disc Structure (BD): Disc Information on BD (00h) ----
Media Type: 1, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 4098
--- Header ---
Disc Information Identifier: <DI>
Disc Information Format: 01 h
Number of DI Units/Aux Frames in each DI block: 4
Number of (recording) layer to which this DI Unit applies: 0
DI unit Sequence Number in DI Block: 0
Continuation flag: Next DI Unit is the start of a new set of parameters (0)
Number of DI bytes in use in this DI unit: 98
--- Body ---
Disc Type Identifier: <BDR>
Disc Size/Class/Version: 1
DI Unit Format dependent contents:
BD Structure: 18 (12 h):
1 recording layer (SL), BD-R
Hybrid Disc identifier/Channel bit length: 1 (1 h):
no DVD layer present, no CD layer present
channel bit length of 74,5 nm (25.0 GB max. per layer)
Push-Pull polarity flag bits: 00 h
Recorded mark polarity flag bits: 00 h
BCA descriptor: BCA-code present (1)
Maximum transfer rate needed by the application: 0 Mbit/s
Data zone allocation:
First Physical ADIP Address of the Data Zone of the related layer (FAA): 00020000 h (131072)
Last Physical ADIP Address of the Data Zone of the related layer (LAA): 00194E7E h (1658494)
Recording velocities:
Nominal Recording Velocity: 4.92 m/s (1EC h)
Maximum Recording Velocity: 4.92 m/s (64 h -> 100/100)=1
Minimum Recording Velocity: 4.92 m/s (64 h -> 100/100)=1
...
12 01 00 00 01 00 00 00 - 00 00 00 00 00 02 00 00
00 19 4E 7E 01 EC 64 64 - 28 28 28 28 1E 1E 1E 1E
00 00 00 00 5E 70 6D 04 - 04 3E 1D 91 80 F8 F8 F8
F8 00 00 00 00 08 08 08 - 08 50 00 50 00 50 00 50
00 50 00 50 00 50 00 50 - 00 50 00 50 00 50 00 50
00 80 80 C0 C8 D0 00 00
--- Trailer ---
Disc Manufacturer ID: 56 45 52 42 41 54 h <VERBAT>
Media Type ID: 49 4D 63 <IMc>
Time Stamp [m:y]: 0 : 0000 (00 00 h)
Product Revision Number: 0
20:05:18 #19 SPTI -1169 File SCSIPassThrough.cpp, Line 196
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x04
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 B4 04 04 00 80
Buffer x0842c7c0: Len x20
20:05:18 #20 SPTI -1169 File SCSIPassThrough.cpp, Line 196
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169)
CDB Data: 0xAD 01 00 00 00 00 00 0A 08 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x04
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 B4 04 04 00 80
Buffer x0a161d00: Len x800
20:05:18 #21 Text 0 File BD.cpp, Line 520
Format BD-R with Format Type 32h, sub-type 1, spare area size 382528 -> return code 0
Allocated spare area size on disc 0
BD: Start write address at LBA 0, Recording mode: unknown Recording Mode (0),
spare area allocation: allocation (1), Stream recording: NO (0); return code -1169
20:05:18 #22 CDR -1169 File ThreadedTransferInterface.cpp, Line 1680
Logical unit not ready, operation in progress
D: HL-DT-ST BD-RE GGW-H20L
20:05:18 #23 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1680
Could not perform start of Disc-at-once
20:05:18 #24 SPTI -1169 File SCSIPassThrough.cpp, Line 196
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169)
CDB Data: 0x5A 00 05 00 00 00 00 00 48 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x04
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 B4 04 04 00 80
Buffer x0a1bf3c0: Len x48
20:05:18 #25 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800
20:05:18 #26 Phase 38 File dlgbrnst.cpp, Line 1767
Burn process failed at 4x (17,980 KB/s)
20:05:18 #27 SPTI -1169 File SCSIPassThrough.cpp, Line 196
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169)
CDB Data: 0x1E 00 00 00 00 00 00 00 00 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x04
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 B4 04 04 00 80
20:05:18 #28 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
20:05:18 #29 Text 0 File Cdrdrv.cpp, Line 11420
DriveLocker: UnLockVolume completed
20:05:18 #30 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Advertisement
|
|
|
|
AfterDawn Addict
|
26. May 2008 @ 07:05 |
Link to this message
|
the succesful write a month ago was it the bd-re disc?
on a quick scan of the log all seems ok, was the succesful write before the update on firmware and update of nero to v8.3.2.1 ?
what was the size of the project you were burning?
20:01:16 #5 Text 0 File DlgWaitCD.cpp, Line 311
Last possible write address on media: 11836863 (2630:24.63, 23118MB)
Last address to be written: 11836863 (2630:24.63, 23118MB)
as above are identicle?
were you not finalizing the disc either?
Write : TRUE
Finalize CD : FALSE
Nothing here to see, move along folks.
 This message has been edited since posting. Last time this message was edited on 26. May 2008 @ 07:11
|
|
flamefox
Newbie
|
26. May 2008 @ 10:03 |
Link to this message
|
Thanks for the reply.
The successful burn a month ago was with one of the BD-R discs from the same pack as the ones i'm getting the problems with.
I only upgraded the firmware and version of Nero after getting a couple of coasters yesterday to see if it solved the problem.
I've even put the drive into another pc to see if that solved the problem but got the same result. I've included the log from this burn below.
Not sure why it was set to not finalize before but it was this time and the size of the project this time was 23,084,178 KB with Nero reporting the disc could hold 23,098 KB
Think I might try buying another blank BD-R just in case these are faulty - seems strange that the first one worked ok though.
---
Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 8.3.2.1
Internal Version: 8, 3, 2, 1
Recorder: <HL-DT-ST BD-RE GGW-H20L>Version: YL03 - HA 1 TA 0 - 8.3.2.1
Adapter driver: <Serial ATA> HA 1
Drive buffer : 2048kB
Bus Type : default
CD-ROM: <HL-DT-ST BD-RE GGW-H20L >Version: YL03 - HA 1 TA 0 - 8.3.2.1
Adapter driver: <Serial ATA> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST3750640AS atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST BD-RE GGW-H20L atapi Port 2 ID 0 DMA: On
ArrayPeripheral : MARVELL Virtual Device 1.00 mv61xx Port 4 ID 25 DMA: Off
CdRomPeripheral : XZ7976F RTY707O 1.01 ap0nmalz Port 5 ID 0 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST BD-RE GGW-H20L D: CdRom0
XZ7976F RTY707O E: CdRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2047MB (2097151kB)
Free physical memory: 2047MB (2097151kB)
Memory in use : 18 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
26.5.2008
UDF compilation
13:45:58 #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
13:45:58 #2 Text 0 File Isodoc.cpp, Line 6713
UDF document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : pure
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
13:45:58 #3 Text 0 File Burncd.cpp, Line 3568
Turn on Disc-At-Once, using Blu-ray Disc media
13:45:58 #4 Text 0 File FilesystemSettingsValidator.cpp, Line 142
FS Settings: using validator 'CUDFSettingsValidatorBD'
ParamMode = 'automatic', changing UDF partition type from 'physical' to 'physical'
Changing UDF revision from '1.02' to '1.02'
13:45:59 #5 Text 0 File DlgWaitCD.cpp, Line 311
Last possible write address on media: 11826175 (2628:02.25, 23097MB)
Last address to be written: 11542815 (2565:04.15, 22544MB)
13:45:59 #6 Text 0 File DlgWaitCD.cpp, Line 323
Write in overburning mode: NO (enabled: CD)
13:45:59 #7 Text 0 File DlgWaitCD.cpp, Line 2932
Recorder: HL-DT-ST BD-RE GGW-H20L, Media type: BD-R (seq)
13:45:59 #8 Text 0 File DlgWaitCD.cpp, Line 497
>>> Protocol of DlgWaitCD activities: <<<
=========================================
13:45:59 #9 Text 0 File ThreadedTransferInterface.cpp, Line 754
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 11542816 (11542816) = #11542816/2565:4.16
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 11542816 blocks [D: HL-DT-ST BD-RE GGW-H20L]
--------------------------------------------------------------
13:45:59 #10 Text 0 File ThreadedTransferInterface.cpp, Line 956
Prepare [D: HL-DT-ST BD-RE GGW-H20L] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 23639687168, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 11542816 | 0 | 0x00
11542816 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
13:45:59 #11 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
13:45:59 #12 Text 0 File Burncd.cpp, Line 4359
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
13:45:59 #13 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started
13:45:59 #14 Text 0 File Burncd.cpp, Line 4481
Cache writing successful.
13:45:59 #15 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed
13:45:59 #16 Phase 28 File dlgbrnst.cpp, Line 1767
Speed measurement started
13:45:59 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2673
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
13:46:01 #18 SPTI -1 File SCSIPassThrough.cpp, Line 196
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0xB6
Sense Qual: 0x80
Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 B4 B6 80
Buffer x081e7240: Len x20
13:46:01 #19 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 590400
13:46:01 #20 Text 0 File CUDFTransferItem2.cpp, Line 672
GenUDF2 FS Layout:
=-=-=-=-=-=-=-=-=-=-
Sectors to be written: 11542816
Session Start: Sector 0
Volume Structure: Sector [0, 256] (257 Sectors)
Meta Data: Sector [257, 393] (137 Sectors)
Data: Sector [394, 11542482] (11542089 Sectors)
After Data: Sector [11542483, 11542495] (13 Sectors)
Trailer Track: Sector [11542496, 11542815] (320 Sectors)
GenUDF2 Parameters:
=-=-=-=-=-=-=-=-=-=-
PrepTime: 05-26-2008 13:45:58
UDF Revision: 1.02
UDF Partition Type: Physical
UDF Special Mode: None
Bytes per Sector: 2048
Session Start: 0
Physical Partition Start: -1
Total Capacity: 11826176
Multi Session Mode: None
Disc Type: BD-R
OS Class: 0
Volume ID: New
Allow Unicode Labels: 0
Duplicate Meta Data: 1
MS Info File: 00000000
VMS Rollback File: 00000000
Create ISO bridge: 0
ECC Block Length: 32
Sparing Packet Length: 32
Allocation Unit Size: 32
Alignment Unit Size: 32
Make Writable: 0
Access Type: Read-only
14:04:30 #21 Text 0 File WriterStatus.cpp, Line 245
<D: HL-DT-ST BD-RE GGW-H20L> start writing Lead-Out at LBA 11542816 (B02120h), length 0 blocks
14:04:30 #22 Phase 29 File dlgbrnst.cpp, Line 1716
Speed measurement completed: 4.6x (20,824 KB/s)
14:04:30 #23 Phase 36 File dlgbrnst.cpp, Line 1767
Burn process started at 4x (17,980 KB/s)
14:04:30 #24 Text 0 File ThreadedTransferInterface.cpp, Line 2673
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
14:04:30 #25 Text 0 File Cdrdrv.cpp, Line 10164
---- Disc Structure (BD): Disc Information on BD (00h) ----
Media Type: 1, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 4098
--- Header ---
Disc Information Identifier: <DI>
Disc Information Format: 01 h
Number of DI Units/Aux Frames in each DI block: 4
Number of (recording) layer to which this DI Unit applies: 0
DI unit Sequence Number in DI Block: 0
Continuation flag: Next DI Unit is the start of a new set of parameters (0)
Number of DI bytes in use in this DI unit: 98
--- Body ---
Disc Type Identifier: <BDR>
Disc Size/Class/Version: 1
DI Unit Format dependent contents:
BD Structure: 18 (12 h):
1 recording layer (SL), BD-R
Hybrid Disc identifier/Channel bit length: 1 (1 h):
no DVD layer present, no CD layer present
channel bit length of 74,5 nm (25.0 GB max. per layer)
Push-Pull polarity flag bits: 00 h
Recorded mark polarity flag bits: 00 h
BCA descriptor: BCA-code present (1)
Maximum transfer rate needed by the application: 0 Mbit/s
Data zone allocation:
First Physical ADIP Address of the Data Zone of the related layer (FAA): 00020000 h (131072)
Last Physical ADIP Address of the Data Zone of the related layer (LAA): 00194E7E h (1658494)
Recording velocities:
Nominal Recording Velocity: 4.92 m/s (1EC h)
Maximum Recording Velocity: 4.92 m/s (64 h -> 100/100)=1
Minimum Recording Velocity: 4.92 m/s (64 h -> 100/100)=1
...
12 01 00 00 01 00 00 00 - 00 00 00 00 00 02 00 00
00 19 4E 7E 01 EC 64 64 - 28 28 28 28 1E 1E 1E 1E
00 00 00 00 5E 70 6D 04 - 04 3E 1D 91 80 F8 F8 F8
F8 00 00 00 00 08 08 08 - 08 50 00 50 00 50 00 50
00 50 00 50 00 50 00 50 - 00 50 00 50 00 50 00 50
00 80 80 C0 C8 D0 00 00
--- Trailer ---
Disc Manufacturer ID: 56 45 52 42 41 54 h <VERBAT>
Media Type ID: 49 4D 63 <IMc>
Time Stamp [m:y]: 0 : 0000 (00 00 h)
Product Revision Number: 0
14:08:34 #26 SPTI -1169 File SCSIPassThrough.cpp, Line 196
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x04
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 B4 04 04 00 80
Buffer x08288180: Len x20
14:08:34 #27 SPTI -1169 File SCSIPassThrough.cpp, Line 196
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169)
CDB Data: 0xAD 01 00 00 00 00 00 0A 08 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x04
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 B4 04 04 00 80
Buffer x0829ab00: Len x800
14:08:34 #28 Text 0 File BD.cpp, Line 520
Format BD-R with Format Type 0h, sub-type 1, spare area size 0 -> return code 0
Allocated spare area size on disc 0
BD: Start write address at LBA 0, Recording mode: unknown Recording Mode (0),
spare area allocation: allocation (1), Stream recording: NO (0); return code -1169
14:08:34 #29 CDR -1169 File ThreadedTransferInterface.cpp, Line 1680
Logical unit not ready, operation in progress
D: HL-DT-ST BD-RE GGW-H20L
14:08:34 #30 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1680
Could not perform start of Disc-at-once
14:08:34 #31 SPTI -1169 File SCSIPassThrough.cpp, Line 196
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169)
CDB Data: 0x5A 00 05 00 00 00 00 00 48 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x04
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 B4 04 04 00 80
Buffer x0829a400: Len x48
14:08:34 #32 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800
14:08:34 #33 Phase 38 File dlgbrnst.cpp, Line 1767
Burn process failed at 4x (17,980 KB/s)
14:08:34 #34 SPTI -1169 File SCSIPassThrough.cpp, Line 196
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169)
CDB Data: 0x1E 00 00 00 00 00 00 00 00 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x04
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 B4 04 04 00 80
14:08:34 #35 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
14:08:34 #36 SPTI -1169 File SCSIPassThrough.cpp, Line 196
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169)
CDB Data: 0x1B 00 00 00 02 00 00 00 00 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x04
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 B4 04 04 00 80
14:08:34 #37 SPTI -1169 File SCSIPassThrough.cpp, Line 196
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169)
CDB Data: 0x1E 00 00 00 00 00 00 00 00 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x04
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 B4 04 04 00 80
14:08:34 #38 SPTI -1169 File SCSIPassThrough.cpp, Line 196
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169)
CDB Data: 0x1B 00 00 00 02 00 00 00 00 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x04
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 B4 04 04 00 80
14:08:34 #39 Text 0 File Cdrdrv.cpp, Line 11420
DriveLocker: UnLockVolume completed
14:08:34 #40 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
AfterDawn Addict
|
26. May 2008 @ 10:23 |
Link to this message
|
hmmm
so the good burn was before updates on firmware and nero...
ok
latest nero isnt a 100% from what im reading here on ad this could be an issue now aswell as the firmware maybe? as before on a good burn it could just of been the setting like not finalizing. as a month ago was ok, and now you may have changed something slightly getting a bad burn hence you think update firmware and nero.
do you have your older nero still? if so try it but use the nero uninstall tool from nero website first!
-----------------
how big was the last good burn as this is very close to outer edge of disc!
Last possible write address on media: 11826175 (2628:02.25, 23097MB)
Last address to be written: 11542815 (2565:04.15, 22544MB)
make your project smaller!
Nothing here to see, move along folks.
This message has been edited since posting. Last time this message was edited on 26. May 2008 @ 10:27
|
|
flamefox
Newbie
|
26. May 2008 @ 11:36 |
Link to this message
|
According to Nero the total data to be written for the disc that did work was 23,615,274 KB (23,063 MB)
Will have a look for the older version of Nero now
|
|
djkrishna
Member
|
26. May 2008 @ 11:54 |
Link to this message
|
it seems nero is screwing up
bd-re gives u 22.5gb
bd-r gives u 23.6gb
reboot it
pop the bd-r disc in and open the nero
somewhow either nero think u have bd-re disc or bd-r disc with less
gb/mb/kb
once u open the nero refresh it
nothing wrong with lg drive
(maybe the firmware yl03 and nero is n't working togetrher
|
|
flamefox
Newbie
|
26. May 2008 @ 14:31 |
Link to this message
|
Tried going back to the earlier version of Nero but still have the same problem.
Nero recognises it as a BD-R disc in the drive and lists the available size as 23,098 KB. Tried refreshing and ejecting and re-inserting the disc but it still says the same.
I've also just installed Cyberlink Power2Go (which came bundeled with the drive) and then ImgBurn and they both fail when trying to burn as well.
Think i'm leaning toward it being a problem with either the discs or the drive.
|
AfterDawn Addict
|
26. May 2008 @ 15:15 |
Link to this message
|
is the drive SATA or IDE ?
could try an uninstall / reboot from within device manager
does seem dam wierd that first bd-r burned ok next not?
what is the project exactly? copy of a copy?
Nothing here to see, move along folks.
|
|
flamefox
Newbie
|
26. May 2008 @ 16:09 |
Link to this message
|
It's a SATA drive. I've tried uninstalling and re-installing it but it hasn't made a difference.
The project's just a load of xvid files that i'm burning from the hard drive to disc. The disc that burnt ok was a load of xvid's as well.
Agreed it is very strange that the first one worked and the rest haven't. Going to buy another BD-R disc in the week and if that still doesn't work i'll see if I can return the drive for a replacement. Out of ideas of what else to try.
Just wish these discs didn't cost so much. I've got about £50 worth of coasters lying around!
Thanks for all the help. Will let you know how I get on.
|
AfterDawn Addict
|
27. May 2008 @ 02:03 |
Link to this message
|
|
the price is why i dont use them...
good luck with new discs
come back and let us know on this if you would...
Nothing here to see, move along folks.
|
|
Advertisement
|
|
|
|
flamefox
Newbie
|
22. June 2008 @ 12:03 |
Link to this message
|
Hi there,
Just thought i'd give an update on this.
Ended up sending the drive back for a replacement and the new one they sent out works fine. I've even updated it to the same firmware as the old one and it still works.
Looks like there must have been some kind of fault with the original one.
Thanks again for all the help.
|
|
