|
|
|
Problem DVD Burning - Dual Layer Only
|
|
|
tud
Newbie
|
20. June 2008 @ 01:00 |
Link to this message
|
I've been trying multiple methods and different things to burn movie files to a dual layer DVD disc, and nothing is working. The strange thing is, DL burning was working OK a couple of months ago (and now isn't), and single layer disc burning still works OK. The things I've tried:
* Using Nero, IMGBurn and DVDFab;
* Using VOB, VTS, etc files vs ISO;
* Tried different burning speeds (4x, 2.4x, 2x);
* Tried different media - TDK and Verbatim (both rate high quality);
* Closed down programs running in the background;
* Clean uninstalled Nero, DVDFab, then reinstalled;
All give the same error (Nero logfile below).
Does anyone have any ideas? The only things I've read on threads and haven't tried is (1) getting a lense cleaning disc (if this was the solution why is single layer DVD burning still working), and (2) update firmware - but I'm having trouble sourcing an update for my Optorite DD1601...
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 6:35:34 PM
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
(Nero Express)
Recorder: <DVDR/RW DD1601> Version: 16AF - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <DVDR/RW DD1601 >Version: 16AF - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080P0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : DVDR/RW DD1601 atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
DVDR/RW DD1601 E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523756kB)
Free physical memory: 201MB (206580kB)
Memory in use : 60 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
18.6.2008
UDF/ISO compilation
8:27:14 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
8:27:15 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)
8:27:15 PM #3 Text 0 File Isodoc.cpp, Line 6359
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
8:27:15 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
8:27:15 PM #5 Text 0 File Reader.cpp, Line 127
Reader running
8:27:15 PM #6 Text 0 File Writer.cpp, Line 122
Writer DVDR/RW DD1601 running
8:27:15 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
8:27:15 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
8:27:15 PM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
8:27:16 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 4095551 (910:07.26, 7999MB)
8:27:16 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
8:27:16 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: DVDR/RW DD1601, Media type: DVD+R9 Double Layer
8:27:16 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
8:27:16 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 4095552 (4095552) = #4095552/910:7.27
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 4095552 blocks [DVDR/RW DD1601]
--------------------------------------------------------------
8:27:16 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [DVDR/RW DD1601] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 8387690496, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
4095552 | lead-out | 1 | 0x41 | 0x00
8:27:16 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
8:27:16 PM #17 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
8:27:16 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
8:27:16 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2.4x (3,324 KB/s)
8:27:16 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
8:27:16 PM #21 Text 0 File DVDPlusDualLayer.cpp, Line 628
L0 Data Zone Capacity set to 2047904 (1F3FA0h, 3999MB) -> OK, confirmed setting
8:27:16 PM #22 CDR -1205 File DVDPlusDualLayer.cpp, Line 655
Burning Layer 1
8:27:16 PM #23 Text 0 File DVDPlusDualLayer.cpp, Line 665
Start writing layer 1 at address 0 (0h)
Recording mode: unknown Recording Mode
8:27:16 PM #24 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0C750400
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x24 0x00
8:27:16 PM #25 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes
8:28:11 PM #26 SCSI -1135 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0C0B0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x01 0x1B 0xA0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x0C 0x00
8:28:11 PM #27 CDR -1135 File Writer.cpp, Line 311
Write error
8:28:11 PM #28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
8:28:11 PM #29 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
8:31:06 PM #30 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders
8:31:06 PM #31 Phase 129 File dlgbrnst.cpp, Line 1832
Generating DVD borders completed successfully
8:31:06 PM #32 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'WNASPINT.DLL': Ver=V1.20, size=57344 bytes, created 4/02/2003 8:24:08 AM
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 3/08/2004 10:59:44 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Advertisement
|
 |
|
|
Senior Member
|
20. June 2008 @ 11:56 |
Link to this message
|
A couple of possibilities:
1) Your Optorite DD1601 could be going bad, it's what, a 4 yr old drive?
2) Corrupted firmware. You have the most current that I could find. Here's a link for the firmware if you want to refresh.
3) You are now getting the newer DLs made with the inverse stack procedure and your drive isn't compatible with them.
Solutions to the above:
See if you can find Verbatim DLs rated at 2.4x max.
Buy a new drive.
This message has been edited since posting. Last time this message was edited on 20. June 2008 @ 12:15
|
|
tud
Newbie
|
20. June 2008 @ 20:24 |
Link to this message
|
Yeah, the drive is getting old now. I'll try the firmware refresh and media suggestion and see how it goes...then it might be a replacement drive.
Thanks for your response, appreciate it. I'll post the results once tested.
|
AfterDawn Addict
|
21. June 2008 @ 09:34 |
Link to this message
|
Also I'm sorry to burst your bubble but TDK DL media is NOT high quality. Stick with Verbatim DLs MIS and burn them 2.4X in Imgburn, not outdated nero6.6.0.18 which is a great version but not for DL burns.
|
|
tud
Newbie
|
21. June 2008 @ 19:20 |
Link to this message
|
Originally posted by garmoon:
Also I'm sorry to burst your bubble but TDK DL media is NOT high quality.
I looked at the table here - http://www.digitalfaq.com/media/dvdmedia.htm
which lists TDK as 1st class media, but now I notice is doesn't show DL discs...so will stick with Verbatim, thanks.
|
AfterDawn Addict
|
21. June 2008 @ 21:14 |
Link to this message
|
If you read down to the end of that page you will see that TDK media can be made by upwards of 6 different companies. I would stay away from SL discs unless you get a stack of TY TDKs. Use Verbatim MIS for DLs that we all know is the best there is.
|
|
jhimlingo
Suspended permanently
|
28. June 2008 @ 13:10 |
Link to this message
|
|
spam removed
This message has been edited since posting. Last time this message was edited on 28. June 2008 @ 13:24
|
|
tud
Newbie
|
29. June 2008 @ 02:19 |
Link to this message
|
|
Finally..it works (though I had to get a new drive)!
Got a Lite On (SHM 165P6S), and the DL burning worked first time. Shame I had to go through about 10 DL discs.
Thanks for the pointers Hobbit112 and Garmoon.
|
|
Advertisement
|
|
|
AfterDawn Addict
|
29. June 2008 @ 14:53 |
Link to this message
|
|
glad you got it sorted. You'll like the lite-ons. And a big thanks for letting us know what the problem was; so others may benefit from your misery! LOL
|
|
