|
|
|
Suddenly I cant burn DVDs, only CDs
|
|
|
TMono
Newbie
|
24. August 2008 @ 12:02 |
Link to this message
|
This is the story:
I have 2 combo LG Super Multi RW DVD/CD Recorders installed on my PC, I`ve already burned about 150 DVDs and innumerable CDS over the 2 years that I had them, the letter for my drive recognition are E: and F:, the ?F:? burner was the one that I always use to burn all my DVDs, the ?E:? one I used it rarely but I`ve burned like 25 disks on that over the 2 years. They never gave me any problems but Suddenly 2 weeks ago I couldn`t burn DVDs, I always burned with NERO 7. I tried to burn a CD and It worked just fine, but when I tried to burn a DVD, the message ?Could not perform end of Disc-at-once? ?Burn process failed? appeared at the end log, and the disk was left on blank(thank god I didn?t waste any disks). Then I tried to burn with the ?E? drive(practically new) and the same message was displayed. So I discard the possibility of Drive over use, or hardware failure because they are the same, and this is another important thing: after Nero gave me the bad news? I refused to believe that, so I tried to copy a Movie DVD with ?Clone DVD? and it burned just fine, and even burned the maxell DVD that I was trying on, so the drive was working and the disk too and had the possibility of burning. I restarted my PC, and when I tried it again with Clone DVD, suddenly came the error on the burning process and failed at the end. So I think it?s a software block.
I´ve read a lot of blogs over the past week and find similar problems, tried some of the solutions but none of them worked. I changed the speed of the burning from 16x to 8x,and update to NERO 8 but nothing, the box that changes disk at once to track at once, is on gray and not changeable. I went to the IDE ATA//ATAPI Controllers, make sure they were on DMA available and they were. This is my log trying to burn a DVD on 8x,I hope someone could help me:
Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 8.1.1.4
Internal Version: 8, 1, 1, 4
Recorder: <HL-DT-ST DVDRAM GSA-H42N>Version: RL00 - HA 1 TA 1 - 8.1.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default
CD-ROM: <HL-DT-ST DVDRAM GSA-H42N >Version: RL00 - HA 1 TA 0 - 8.1.1.4
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVDRAM GSA-H42N atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-H42N atapi Port 0 ID 1 DMA: On
DiskPeripheral : WDC WD2500JS-60NCB1 atapi Port 2 ID 0 DMA: On
OtherPeripheral : Marvell RAID Console 1.00 mv61xx Port 3 ID 20 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 4 ID 0 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 4 ID 1 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 4 ID 2 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 4 ID 3 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-H42N E: CdRom0
HL-DT-ST DVDRAM GSA-H42N F: CdRom1
Generic DVD-ROM G: CdRom2
Generic DVD-ROM H: CdRom3
Generic DVD-ROM I: CdRom4
Generic DVD-ROM J: CdRom5
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2045MB (2094788kB)
Free physical memory: 1431MB (1465424kB)
Memory in use : 30 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
20.8.2008
ISO compilation
16:14:10 #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
16:14:10 #2 Text 0 File Isodoc.cpp, Line 6671
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
16:14:11 #3 ISO9660GEN -11 File Geniso.cpp, Line 3347
First writeable address = 0 (0x00000000)
16:14:11 #4 Text 0 File Burncd.cpp, Line 3530
Turn on Disc-At-Once, using DVD media
16:14:11 #5 Text 0 File FilesystemSettingsValidator.cpp, Line 142
FS Settings: using validator 'CUDFSettingsValidatorDVD'
ParamMode = 'automatic', changing UDF partition type from 'physical' to 'physical'
Changing UDF revision from '1.02' to '1.02'
16:14:11 #6 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1700991 (377:59.66, 3322MB)
16:14:11 #7 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)
16:14:11 #8 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: HL-DT-ST DVDRAM GSA-H42N, Media type: DVD+R
Disc Manufacturer ID: <RITEK>, Media Type ID: <F16>, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 7
16:14:11 #9 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
16:14:11 #10 Text 0 File ThreadedTransferInterface.cpp, Line 785
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1700992 (1700992) = #1700992/377:59.67
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1700992 blocks [F: HL-DT-ST DVDRAM GSA-H42N]
--------------------------------------------------------------
16:14:11 #11 Text 0 File ThreadedTransferInterface.cpp, Line 986
Prepare [F: HL-DT-ST DVDRAM GSA-H42N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3483631616, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 1700992 | 0 | 0x00
1700992 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
16:14:21 #12 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
16:14:21 #13 Text 0 File Burncd.cpp, Line 4316
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
16:14:21 #14 Phase 24 File dlgbrnst.cpp, Line 1764
Caching of files started
16:14:21 #15 Text 0 File Burncd.cpp, Line 4435
Cache writing successful.
16:14:21 #16 Phase 25 File dlgbrnst.cpp, Line 1764
Caching of files completed
16:14:21 #17 Phase 36 File dlgbrnst.cpp, Line 1764
Burn process started at 8x (11.080 KB/s)
16:14:21 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2735
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
16:14:21 #19 Text 0 File Cdrdrv.cpp, Line 10026
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: RITEK...
Media type ID: F16
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..783]:
00 00 07 52 49 54 45 4B - 00 00 00 46 31 36 01 38 ...RITEK...F16.8
23 54 37 12 02 50 6E 02 - 8C 68 16 16 0B 0B 0A 0A #T7..Pn..h......
01 1D 1E 0C 0C 12 12 01 - 00 00 00 00 00 00 00 00 ................
01 00 38 38 02 2D 62 1E - 08 2E 23 10 04 1E 1D 01 ..88.-b...#.....
00 00 02 2D 62 1E 08 2E - 23 10 04 1E 1D 01 00 00 ...-b...#.......
02 00 54 70 02 38 64 24 - 30 18 10 10 01 20 00 00 ..Tp.8d$0.......
00 00 02 48 60 2A 30 18 - 10 10 01 20 00 00 00 28 ...H`*0........(
03 00 54 E0 02 41 64 24 - 30 18 10 10 01 28 00 00 ..T..Ad$0....(..
00 00 02 AF 5B 3E 30 18 - 10 10 01 28 00 00 00 5A ....[>0....(...Z
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
16:14:21 #20 Text 0 File DVDR.cpp, Line 6525
Drive: HL-DT-ST DVDRAM GSA-H42N
Book Type request [LG]: DVD-ROM
Changing the Book Type was finished successfully, return code 0
16:14:21 #21 CDR -1207 File DVDR.cpp, Line 6452
Book Type automatically set to: DVD-ROM
16:14:21 #22 Text 0 File DVDPlusRW.cpp, Line 675
Start write address at LBA 0
DVD high compatibility mode: Yes
16:14:21 #23 Text 0 File ThreadedTransfer.cpp, Line 268
Pipe memory size 83836800
16:14:38 #24 SPTI -1135 File SCSIPassThrough.cpp, Line 181
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 00 20 00 00 20 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 0A 35 2D 03 0E 0C
Buffer x0abd0080: Len x10000
0x30 00 6B BE 00 00 00 00 BE 6B 00 00 00 00 00 00
0x00 00 69 03 05 08 26 10 E8 00 00 00 01 00 00 01
0x0E 41 43 41 58 31 36 50 4C 2E 54 4C 42 3B 31 00
16:14:38 #25 CDR -1135 File Writer.cpp, Line 306
Write error
F: HL-DT-ST DVDRAM GSA-H42N
16:14:39 #26 SPTI -1135 File SCSIPassThrough.cpp, Line 181
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 0A 35 2D 03 0E 0C
16:14:39 #27 Phase 127 File dlgbrnst.cpp, Line 1764
Generating DVD high compatibility borders
16:14:41 #28 Text 0 File DVDPlusRW.cpp, Line 935
EndDAO: Last written address 32
16:14:41 #29 CDR -1135 File WriterStatus.cpp, Line 162
Write error
F: HL-DT-ST DVDRAM GSA-H42N
16:14:41 #30 TRANSFER -24 File WriterStatus.cpp, Line 162
Could not perform end of Disc-at-once
16:14:41 #31 Phase 38 File dlgbrnst.cpp, Line 1764
Burn process failed at 8x (11.080 KB/s)
16:14:41 #32 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
16:14:47 #33 Text 0 File Cdrdrv.cpp, Line 11276
DriveLocker: UnLockVolume completed
16:14:47 #34 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Thank you for any help.
TMono
|
|
JAirplay
Newbie
|
24. August 2008 @ 12:55 |
Link to this message
|
There's still the chance it's hardware failure. You mentioned burning a great many DVDs and CDs over two years. It's possible that you've reached the lifespan of the DVD player.
The best bet to rule out hardware failure is swap it with a friend's drive. See if your drive works in his, and his drive works in yours.
Remember that hardware can act iffy if about to die. So SOMETIMES, it will work. But slow or random failure are still signs of hardware death.
It is very strange that both drives started doing this at exactly the same time. Still, try swapping out with a friend, just to completely rule out hardware failure. You can also buy a new drive and return it after the test, if you find it inconvenient to swap with a bud.
|
|
JAirplay
Newbie
|
24. August 2008 @ 13:03 |
Link to this message
|
|
Hi again. Been reading more about this, and many people are complaining of this error when they use bad, cheap media. Did you happen to start in on a new stack of DVDs/CDs two weeks ago? Maybe the LGs don't like the media type (even at ANY speed).
|
|
Advertisement
|
|
|
|
TMono
Newbie
|
24. August 2008 @ 23:35 |
Link to this message
|
|
Thanks for the quick reply JAirplay, the thing is that I have 2 exact same burners, and the other one is practically new, and has the same error, even that I only use it rarely. But I´ll try to swap it to another PC to make sure? The other thing about the disks, that is really been proven that`s not the problem because I burned the same exact disk that gave me the error in the firs place, and now that disk is burned just right, so I discard a cheep or defective media, all doe I tried with Maxell and Memorex disks to make sure of that, and gave me the same error. But thanks anyway.
TMono
|
|
