I have a Plextor-800 A burner.
I have double layer disc from Emtect medium code is RICOHJPN D01.
Have anyone trying this medium? Does it work with mine plextor?
the RICOHJPN is usually top stuff, i have the same ODD the PX-810SA and use Verbatim DVD+R DL with no problem just keep your burn speed at 4x max to be on the safe side
Yes I have try, no the quistion was does it work with mine burner, because I never ever try to burn a double layer disc. But it's working very good mine burner. This was the first time it's working very good.
I have burn Emtect 8x with burn speed 2.4x it's working very good for me. I give door on this site maybe members don't than the now it does work with it.
Check here mine logfile if you don't believe it.
I 21:12:44 ImgBurn Version 2.4.2.0 started!
I 21:12:44 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2)
I 21:12:44 Total Physical Memory: 523.760 KB - Available: 277.220 KB
W 21:12:44 Drive D:\ (FAT32) does not support single files > 4 GB in size.
I 21:12:44 Initialising SPTI...
I 21:12:44 Searching for SCSI / ATAPI devices...
I 21:12:44 Found 1 DVD±RW/RAM!
I 21:20:36 Operation Started!
I 21:20:36 Source File: C:\Documents and Settings\Eigenaar\Bureaublad\Nieuwe map (7)\Coolie (1983) DVD-R.mds
I 21:20:36 Source File Sectors: 3.384.544 (MODE1/2048)
I 21:20:36 Source File Size: 6.931.546.112 bytes
I 21:20:36 Source File Volume Set Identifier: 3957A73B0033A4D7
I 21:20:36 Source File Application Identifier: IMGBURN V2.4.2.0 - THE ULTIMATE IMAGE BURNER!
I 21:20:36 Source File Implementation Identifier: ImgBurn I 21:20:36 Source File File System(s): ISO9660; UDF (1.02)
I 21:20:36 Destination Device: [2:0:0] PLEXTORDVDR PX-800A 1.00 (E:) (ATA)
I 21:20:36 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 2,4x; 4x; 6x; 8x)
I 21:20:36 Destination Media Sectors: 4.173.824
I 21:20:36 Write Mode: DVD I 21:20:36 Write Type: DAO I 21:20:36 Write Speed: 2,4x
I 21:20:36 Link Size: Auto
I 21:20:36 Test Mode: No
I 21:20:36 OPC: No
I 21:20:36 BURN-Proof: Enabled
I 21:20:36 Book Type Setting: N/A
I 21:20:36 Optimal L0 Data Zone Capacity: 1.808.736
I 21:20:36 Optimal L0 Data Zone Method: Copied From Original Disc
I 21:21:02 Filling Buffer... (20 MB)
I 21:21:03 Writing LeadIn...
I 21:21:05 Writing Session 1 of 1... (1 Track, LBA: 0 - 3384543)
I 21:21:05 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3384543)
I 21:21:05 Writing Layer 0... (LBA: 0 - 1808735)
I 21:41:41 Writing Layer 1... (LBA: 1808736 - 3384543)
I 22:00:07 Synchronising Cache...
I 22:00:08 Closing Track...
I 22:00:30 Finalising Disc...
I 22:03:47 Exporting Graph Data...
I 22:03:47 Graph Data File: C:\Documents and Settings\Eigenaar\Application Data\ImgBurn\Graph Data Files\PLEXTOR_DVDR_PX-800A_1.00_DONDERDAG-23-OKTOBER-2008_21-20_RICOHJPN-D01-67_2,4x.ibg
I 22:03:47 Export Successfully Completed!
I 22:03:47 Operation Successfully Completed! - Duration: 00:43:10
I 22:03:47 Average Write Rate: 2.890 KB/s (2.1x) - Maximum Write Rate: 3.332 KB/s (2.4x)
I 22:03:47 Cycling Tray before Verify...
I 22:04:13 Device Ready!
I 22:04:16 Operation Started!
I 22:04:16 Source Device: [2:0:0] PLEXTOR DVDR PX-800A 1.00 (E:) (ATA)
I 22:04:16 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: RICOHJPN-D01-67) (Speeds: 2,4x; 4x; 6x; 8x)
I 22:04:16 Image File: C:\Documents and Settings\Eigenaar\Bureaublad\Nieuwe map (7)\Coolie (1983) DVD-R.mds
I 22:04:16 Image File Sectors: 3.384.544 (MODE1/2048)
I 22:04:16 Image File Size: 6.931.546.112 bytes
I 22:04:16 Image File Volume Set Identifier: 3957A73B0033A4D7
I 22:04:16 Image File Application Identifier: IMGBURN V2.4.2.0 - THE ULTIMATE IMAGE BURNER!
I 22:04:16 Image File Implementation Identifier: ImgBurn I 22:04:16 Image File File System(s): ISO9660; UDF (1.02)
I 22:04:16 Read Speed (Data/Audio): MAX / MAX
I 22:04:16 Verifying Session 1 of 1... (1 Track, LBA: 0 - 3384543)
I 22:04:16 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 3384543)
I 22:04:16 Verifying Layer 0... (LBA: 0 - 1808735)
I 22:23:12 Verifying Layer 1... (LBA: 1808736 - 3384543)
I 22:39:39 Exporting Graph Data...
I 22:39:39 Graph Data File: C:\Documents and Settings\Eigenaar\Application Data\ImgBurn\Graph Data Files\PLEXTOR_DVDR_PX-800A_1.00_DONDERDAG-23-OKTOBER-2008_21-20_RICOHJPN-D01-67_2,4x.ibg
I 22:39:39 Export Successfully Completed!
I 22:39:39 Operation Successfully Completed! - Duration: 00:35:22
I 22:39:39 Average Verify Rate: 3.189 KB/s (2.3x) - Maximum Verify Rate: 6.784 KB/s (4.9x)
Physical Format Information (ADIP):
Disc ID: RICOHJPN-D01-67
Book Type: DVD+R DL
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196.608
Last Physical Sector of Data Area: 16.580.607
Last Physical Sector in Layer 0: 2.283.519
Physical Format Information (Last Recorded):
Disc ID: RICOHJPN-D01-67
Book Type: DVD-ROM
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196.608
Last Physical Sector of Data Area: 16.347.679
Last Physical Sector in Layer 0: 2.005.343
I wasn't concerned with drive compatibility as Plextor has wide media support and good firmware updates. I lied anyway, I've use Ritek D01 not the Ricoh D01's...the D01 confused me. Good luck and happy burning.
I have some Ricoh D01's.. and they are a mixed bunch TBH. Some are great and others are glitchy and jumpy.
You would think Ricoh under their own label would be better than the rebrands, but apparently not. They could have been stored where the light can get at them or been exposed to sunlight.
DL disks are real expensive. Because of problems with the cheaper disks I only burn D/L on Verbs (MIS) now.. Cheapos when you factor in the % of coasters often work out more expensive than Verbs ;) I'm not a fan of high priced disks.. and certainly not a "always use verbatim or ty's" advocate.. just a bit cheap and looking for maximum profits from my burning..Coasters and returns are a direct loss to me.. I always buy my media from a small local shop which has low stock levels.. I know the disks are fresh from the suppliers.
Yes, I had buy those Emtect DVD's for the price for 13,95 euro,-
normal the price is 35,00 euro for 25 stuks.
But those disk are good, I had read too some people's had p[roblem with Verbatim DVD's the shop were those people's but some people's have disk from 2.4 x but the use write speed 8x, that why the get a lot of problem. Today I burn mine thrid Double layer disk it's working good without problem burn speed 2.4 x.
I was wondering if there are more people's here that have that burner from Plextor 880 A and what for medium the use?
