|
|
|
LG GSA 4120B refuses to burn to DVD+R DL media
|
|
|
LordKanti
Newbie
|
27. December 2008 @ 09:08 |
Link to this message
|
Hello, I am writing because I am having trouble burning DVD+R DL with my LG HL-DT-ST DVDRAM GSA-4120B
drive that came with my Gateway PC. I have flashed it to v A104AUTO (I have also tried N0AD, 111, and 102)
and I still cannot burn a single disc. Ripping data is not an issue ( I have tried WALL E and Indiana Jones 4)
as the video and menus will run flawlessly from the HDD, but when I try to burn the media to disc I get various
errors depending on the burning software used. I would love to be able to bitset to DVD-rom, click burn, and
have my movie all backed up and ready to go. So far Bitsetting is a bust and I cant even get a DVD+R book
type DVD9 to burn at all. I have read on several forums that this drive can bitset with firmwares A104 and
higher, however my version of Nero, ImgBurn, DVDInfo Pro, and the Bitsetting patcher I downloaded all say
that the drive cannot bitset. I am using Nero 6.6.0.8 ( I would like to try 6.3.1.25 as I believe that is the version
that has been tested with bitsetting; however, finding an older copy of nero is harder than I thought) DVDFAB
5, ImgBurn 2.4.1.0, andAlcohol 120% 1.9.2.
My PC is maxed out at 2GB RAM and 3ghz P4 w/ HT and I am using Memorex DVD+R DL 8x media. I know the
media isnt the greatest but I have tried several discs and my PC burns single layer memorex DVDs with no
problems at all.
I have tried using the clone option (.iso) and full disc option (VIDEO_TS) of DVDFab and neither produce
anything my drive will burn.
When I try using ImgBurn it asks me to Select a Layer Break Position: I get 1 option, LBA: 1924016 VTS_03 @
50/50% ... the drive then sounds like its going to burn but is hesitant, In the meanwhile ImgBurn states that it
is setting L0 Data Zone Capacity... about a minute later I get the message, "Failed to set L0 Data Zone
Capacity!" Reason: Write Error. I have also seen a message where it tells me a cell has to be split and that
technically "It's the end of the world" or something like that.
Here is a log of the two movies I tried to burn:
(If any other info is needed from me please let me know, as I would like to get to the bottom of this)
; //****************************************\\
; ImgBurn Version 2.4.1.0 - Log
; Saturday, 27 December 2008, 05:38:15
; \\****************************************//
;
;
I 05:30:42 ImgBurn Version 2.4.1.0 started!
I 05:30:42 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)
I 05:30:42 Total Physical Memory: 2,063,080 KB - Available: 1,260,596 KB
I 05:30:42 Initialising SPTI...
I 05:30:42 Searching for SCSI / ATAPI devices...
I 05:30:43 Found 1 CD-ROM, 1 DVD-ROM and 1 DVD±RW/RAM!
I 05:38:14 Close Request Acknowledged
I 05:38:14 Closing Down...
I 05:38:14 Shutting down SPTI...
I 05:38:14 ImgBurn closed!
;
;
; //****************************************\\
; ImgBurn Version 2.4.1.0 - Log
; Saturday, 27 December 2008, 03:22:53
; \\****************************************//
;
;
I 03:12:41 ImgBurn Version 2.4.1.0 started!
I 03:12:41 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)
I 03:12:41 Total Physical Memory: 2,063,080 KB - Available: 1,103,628 KB
I 03:12:41 Initialising SPTI...
I 03:12:41 Searching for SCSI / ATAPI devices...
I 03:12:42 Found 1 CD-ROM, 1 DVD-ROM and 1 DVD±RW/RAM!
I 03:14:11 Operation Started!
I 03:14:11 Source File: C:\Documents and Settings\*****************\Clone\WALL_E.iso
I 03:14:11 Source File Sectors: 3,831,141 (MODE1/2048)
I 03:14:11 Source File Size: 7,846,176,768 bytes
I 03:14:11 Source File Volume Identifier: WALL_E
I 03:14:11 Source File Volume Set Identifier: 391E1C06
I 03:14:11 Source File Implementation Identifier: MEI
I 03:14:11 Source File File System(s): ISO9660, UDF (1.02)
I 03:14:11 Destination Device: [0:0:0] HL-DT-ST DVDRAM GSA-4120B A111 (D:) (ATA)
I 03:14:11 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 4x)
I 03:14:11 Destination Media Sectors: 4,173,824
I 03:14:11 Write Mode: DVD
I 03:14:11 Write Type: DAO
I 03:14:11 Write Speed: 2x
I 03:14:11 Link Size: Auto
I 03:14:11 Test Mode: No
I 03:14:11 OPC: No
I 03:14:11 BURN-Proof: Enabled
I 03:14:12 Book Type Setting: N/A
I 03:15:08 Optimal L1 Data Zone Start LBA: 2076704 (VTS_13, PGC: 2, Cell: 29, Vob/Cell ID: 9/1, Time: 00:24:08,
SPLIP: No)
I 03:15:08 Optimal L0 Data Zone Capacity: 2,076,704
I 03:15:08 Optimal L0 Data Zone Method: IFO Cell Boundary, 'SPLIP' Flag Not Set
W 03:18:51 Failed to set L0 Data Zone Capacity!
W 03:18:51 Reason: Invalid Field in Parameter List
I 03:18:51 Filling Buffer... (20 MB)
I 03:18:51 Writing LeadIn...
W 03:19:17 Failed to Write Sectors 544 - 575 - Reason: Write Error
W 03:19:17 Retrying (1 of 20)...
W 03:19:17 Retry Failed - Reason: Invalid Address For Write
W 03:19:17 Retrying (2 of 20)...
W 03:19:17 Retry Failed - Reason: Invalid Address For Write
W 03:19:17 Retrying (3 of 20)...
W 03:19:17 Retry Failed - Reason: Invalid Address For Write
W 03:19:17 Retrying (4 of 20)...
W 03:19:17 Retry Failed - Reason: Invalid Address For Write
W 03:19:17 Retrying (5 of 20)...
W 03:19:17 Retry Failed - Reason: Invalid Address For Write
W 03:19:17 Retrying (6 of 20)...
W 03:19:17 Retry Failed - Reason: Invalid Address For Write
W 03:19:17 Retrying (7 of 20)...
W 03:19:17 Retry Failed - Reason: Invalid Address For Write
W 03:19:17 Retrying (8 of 20)...
W 03:19:17 Retry Failed - Reason: Invalid Address For Write
W 03:19:17 Retrying (9 of 20)...
W 03:19:17 Retry Failed - Reason: Invalid Address For Write
W 03:19:17 Retrying (10 of 20)...
W 03:19:17 Retry Failed - Reason: Invalid Address For Write
W 03:19:17 Retrying (11 of 20)...
W 03:19:17 Retry Failed - Reason: Invalid Address For Write
W 03:19:17 Retrying (12 of 20)...
W 03:19:17 Retry Failed - Reason: Invalid Address For Write
W 03:19:17 Retrying (13 of 20)...
W 03:19:17 Retry Failed - Reason: Invalid Address For Write
W 03:19:17 Retrying (14 of 20)...
W 03:19:17 Retry Failed - Reason: Invalid Address For Write
W 03:19:17 Retrying (15 of 20)...
W 03:19:17 Retry Failed - Reason: Invalid Address For Write
W 03:19:17 Retrying (16 of 20)...
W 03:19:17 Retry Failed - Reason: Invalid Address For Write
W 03:19:17 Retrying (17 of 20)...
W 03:19:17 Retry Failed - Reason: Invalid Address For Write
W 03:19:17 Retrying (18 of 20)...
W 03:19:17 Retry Failed - Reason: Invalid Address For Write
W 03:19:17 Retrying (19 of 20)...
W 03:19:18 Retry Failed - Reason: Invalid Address For Write
W 03:19:18 Retrying (20 of 20)...
W 03:19:18 Retry Failed - Reason: Invalid Address For Write
E 03:19:25 Failed to Write Sectors 544 - 575 - Reason: Write Error
E 03:19:25 Next Writable Address: 0
I 03:19:25 Synchronising Cache...
W 03:19:32 User opted to skip the 'Close Track/Session/Disc' functions.
E 03:19:32 Failed to Write Image!
E 03:19:32 Operation Failed! - Duration: 00:05:20
I 03:19:32 Average Write Rate: 0 KB/s (0.0x) - Maximum Write Rate: 0 KB/s (0.0x)
I 03:19:51 Operation Started!
I 03:19:51 Source File: C:\Documents and Settings\***************\Clone\WALL_E.iso
I 03:19:51 Source File Sectors: 3,831,141 (MODE1/2048)
I 03:19:51 Source File Size: 7,846,176,768 bytes
I 03:19:51 Source File Volume Identifier: WALL_E
I 03:19:51 Source File Volume Set Identifier: 391E1C06
I 03:19:51 Source File Implementation Identifier: MEI
I 03:19:51 Source File File System(s): ISO9660, UDF (1.02)
I 03:19:51 Destination Device: [0:0:0] HL-DT-ST DVDRAM GSA-4120B A111 (D:) (ATA)
I 03:19:51 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 4x)
I 03:19:51 Destination Media Sectors: 4,153,408
I 03:19:51 Write Mode: DVD
I 03:19:51 Write Type: DAO
I 03:19:51 Write Speed: 2x
I 03:19:51 Link Size: Auto
I 03:19:51 Test Mode: No
I 03:19:51 OPC: No
I 03:19:51 BURN-Proof: Enabled
I 03:19:51 Book Type Setting: N/A
I 03:21:10 Optimal L1 Data Zone Start LBA: 2076704 (VTS_09, PGC: 1, Cell: 36, Vob/Cell ID: 9/1, Time: 00:25:39,
SPLIP: No)
I 03:21:10 Optimal L0 Data Zone Capacity: 2,076,704
I 03:21:10 Optimal L0 Data Zone Method: IFO Cell Boundary, 'SPLIP' Flag Not Set
E 03:21:15 Failed to set L0 Data Zone Capacity!
E 03:21:15 Reason: Invalid Field in Parameter List
E 03:21:15 Operation Failed! - Duration: 00:01:24
I 03:21:15 Average Write Rate: N/A - Maximum Write Rate: N/A
I 03:22:53 Close Request Acknowledged
I 03:22:53 Closing Down...
I 03:22:53 Shutting down SPTI...
I 03:22:53 ImgBurn closed!
;
;
:)
|
AfterDawn Addict
|
27. December 2008 @ 14:48 |
Link to this message
|
|
|
