|
|
|
Burning Layer 1 Failed
|
|
|
Sclaw23
Newbie
|
8. March 2009 @ 00:19 |
Link to this message
|
Im having an issue while burning DVD's. When i first got my DVD burner(last christmas)i would burn dvd's in 3-5 minutes flat without any errors. Now when i burn it gets 8-15% it says "Burning Layer 1 Failed" Then it goes from 4 minutes burning time to 20 minutes. I've tried reinstalling my dvd drive and updating Nero but i still get the same issue. Anyone have a fix? Here is my txt file of my last burn.
My DVD Burner: SONY DVD RW AW-G170A
********** Nero Recode **********
Version: 3.1.4.0
"CD-Key REMOVED"
Project type: Copy entire DVD
Compilation name: DMD_TWILIGHT_CD
Target size: DVD5 (2282925)
21:27:20 File LangStreamPatcher.cpp, Line 56
Command table patching started...
21:27:20 File LangStreamPatcher.cpp, Line 129
All tables successfully patched!
Burn settings:
Target: SONY DVD RW AW-G170A
Number of copies: 1
Write speed: 0 KB/s
Temp folder: C:\Documents and Settings\Scott\My Documents\Nero Recode\VIDEO_TS (1861189632 bytes free)
Direct burning: true
Target media: DVD R/RW, DVD DL, ram.cfm" class="forum_link" target="_blank">DVD-RAM
Shutdown when finished: false
Advanced Analysis: false
Compress Adaptive: false
21:28:02 File burn_dvdfiles.cpp, Line 237
Compile DVD: init
VTS_01 Title Vobs [7583 vobus] 2180.21MB -> 2180.21MB [R 1.00]
Video: 1960.62MB, extra: 219.59MB
Audio: 1 streams
0. 0. Dolby Digital 5.1-ch English 204.78MB [enabled]
Subpicture: 0 streams
VTS_02 Title Vobs [7025 vobus] 2009.75MB -> 2009.75MB [R 1.00]
Video: 1806.66MB, extra: 203.09MB
Audio: 1 streams
0. 0. Dolby Digital 5.1-ch English 189.37MB [enabled]
Subpicture: 0 streams
21:28:02 File burn_dvdfiles.cpp, Line 1243
Compile DVD: begin copy 1
21:28:02 File NeroRecorderBase.cpp, Line 510
Writing to disc: DVD+R
21:28:03 File NeroRecorderBase.cpp, Line 524
Free capacity on disc: 2283089 sectors (2295104)
21:28:03 File burn_dvdfiles.cpp, Line 547
Compile DVD: burning 2283089 sectors (2145350 required)
21:28:03 File burn_dvdfiles.cpp, Line 743
Compile DVD: adjust target size to 4459.16MB (4190.14MB obtained)
21:28:03 File burn_dvdfiles.cpp, Line 593
Compiling DVD Volume started
21:28:31 File vob_record.cpp, Line 647
DirectBurn offset: VTS_01_1.VOB 96
21:40:14 File burn_dvdfiles.cpp, Line 1149
Compile DVD: finished VTS_01 Title Vobs
VTS_01 Title Vobs:
Original 2180.21MB -> Expected 2180.21MB -> Output 2180.20MB
Finished error -0.00MB
Ratio encoded = 0
Original encoded = 7582
Slide encoded = 0
StillImage encoded = 0
Output extra size = 220.70MB
Source video size = 1959.51MB
Pictures Modified [I 0] [P 0] [B 8]
21:43:40 File dvd_record.cpp, Line 424
DirectBurn offset: VTS_01_0.IFO 48
21:43:56 File vob_record.cpp, Line 647
DirectBurn offset: VTS_02_1.VOB 1116448
21:54:12 File burn_dvdfiles.cpp, Line 1149
Compile DVD: finished VTS_02 Title Vobs
VTS_02 Title Vobs:
Original 2009.75MB -> Expected 2009.75MB -> Output 2009.75MB
Finished error -0.00MB
Ratio encoded = 0
Original encoded = 7025
Slide encoded = 0
StillImage encoded = 0
Output extra size = 204.43MB
Source video size = 1805.33MB
Pictures Modified [I 0] [P 0] [B 0]
21:57:38 File dvd_record.cpp, Line 424
DirectBurn offset: VTS_02_0.IFO 1116400
21:57:40 File burn_dvdfiles.cpp, Line 616
Compile DVD: completed successfuly (4190.13MB)
----- Begin NeroAPI error log -----
"CD-Key REMOVED"
Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero API version: 8.3.13.0
Using interface version: 8.0.1.1
Installed in: C:\Program Files\Nero\Nero8\Nero Burning Rom\
Application: Nero\Nero Recode
Internal Version: 8, 3, 13, 0
Recorder: <SONY DVD RW AW-G170A> Version: 1.62 - HA 1 TA 5 - 8.3.13.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD400BB-22JHC0 atapi Port 2 ID 0 DMA: On
DiskPeripheral : WDC WD1200BB-00CAA0 atapi Port 2 ID 1 DMA: On
CdRomPeripheral : SONY DVD RW AW-G170A 1.62 ultra Port 8 ID 0 DMA: Off
CdRomPeripheral : MATSHITADVD-RAM SW-9585 B100 ultra Port 8 ID 2 DMA: Off
=== CDRom-Device-Map ===
MATSHITA DVD-RAM SW-9585 E: CdRom3
SONY DVD RW AW-G170A D: CdRom5
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2029MB (2078160kB)
Free physical memory: 1424MB (1458820kB)
Memory in use : 29 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
7.3.2009
NeroAPI
9:28:03 PM #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
9:28:03 PM #2 Text 0 File DlgWaitCD.cpp, Line 311
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 0 ( 0:00.00, 0MB)
9:28:03 PM #3 Text 0 File DlgWaitCD.cpp, Line 323
Write in overburning mode: NO
9:28:03 PM #4 Text 0 File DlgWaitCD.cpp, Line 2946
Recorder: SONY DVD RW AW-G170A, Media type: DVD+R
Disc Manufacturer ID: <CMC MAG>, Media Type ID: <M01>, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7
9:28:03 PM #5 Text 0 File DlgWaitCD.cpp, Line 497
>>> Protocol of DlgWaitCD activities: <<<
=========================================
9:28:03 PM #6 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
9:28:03 PM #7 Text 0 File BurnAtOnceRecorder.cpp, Line 1028
Estimated filesystem size: 544
9:28:03 PM #8 Phase 36 File APIProgress.cpp, Line 282
Burn process started at 4x (5,540 KB/s)
9:28:04 PM #9 CDR -1205 File BurnAtOnceRecorder.cpp, Line 1889
Burning Layer 1
9:28:04 PM #10 Text 0 File Cdrdrv.cpp, Line 10187
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Transfer Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: CMC.MAG.
Media type ID: M01
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..783]:
00 00 07 43 4D 43 20 4D - 41 47 00 4D 30 31 00 38 ...CMC.MAG.M01.8
23 54 37 18 00 3E 6E 00 - 70 62 15 15 0B 0B 08 08 #T7..>n.pb......
01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................
01 00 38 38 00 1D 62 35 - 07 30 22 10 08 20 1C 01 ..88..b5.0".....
00 00 00 1D 62 35 07 30 - 22 10 08 20 1C 01 00 00 ....b5.0".......
02 00 54 70 02 38 5F 56 - 20 14 0B 0B 01 18 00 00 ..Tp.8_V........
00 00 02 3D 5D 7A 20 14 - 0C 0A 01 18 00 00 00 10 ...=]z..........
03 00 54 DF 02 1F 65 5A - 20 14 0C 0A 01 18 00 00 ..T...eZ........
00 00 02 06 67 86 20 14 - 0C 0A 01 18 00 00 00 89 ....g...........
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
9:28:04 PM #11 SPTI -1065 File SCSIPassThrough.cpp, Line 214
CdRom5: SCSIStatus(x02) WinError(0) NeroError(-1065)
CDB Data: 0xF9 15 01 FF 00 00 00 00 00 00 00 00
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20
9:28:04 PM #12 SPTI -1065 File SCSIPassThrough.cpp, Line 214
CdRom5: SCSIStatus(x02) WinError(0) NeroError(-1065)
CDB Data: 0xF9 14 01 FF 00 00 00 00 00 00 00 00
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20
9:28:04 PM #13 Text 0 File DVDR.cpp, Line 7516
Drive: SONY DVD RW AW-G170A
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished with error, return code -1065
9:28:04 PM #14 Text 0 File DVDR.cpp, Line 6923
Drive: SONY DVD RW AW-G170A
Book Type request [NEC]: DVD-ROM
Changing the Book Type was finished with error, return code -1065
9:28:05 PM #15 Text 0 File DVDPlusRW.cpp, Line 675
Start write address at LBA 0
DVD high compatibility mode: Yes
9:28:30 PM #16 Text 0 File BurnAtOnceRecorder.cpp, Line 689
Reserved fragment at 0. Length: 592
9:28:30 PM #17 Text 0 File BurnAtOnceRecorder.cpp, Line 1916
Reserved start fragment at 0
9:28:31 PM #18 Text 0 File BurnAtOnceRecorder.cpp, Line 689
Reserved fragment at 592. Length: 48
9:28:31 PM #19 Text 0 File BurnAtOnceRecorder.cpp, Line 1427
Writing VTS_01_1.VOB at sector 640
9:35:47 PM #20 Text 0 File BurnAtOnceRecorder.cpp, Line 2699
Finished writing file VTS_01_1.VOB of size 1073739776 bytes (524287 sectors)
9:35:47 PM #21 Text 0 File BurnAtOnceRecorder.cpp, Line 2310
Added extra file VTS_01_2.VOB
9:35:47 PM #22 Text 0 File BurnAtOnceRecorder.cpp, Line 1427
Writing VTS_01_2.VOB at sector 524927
9:42:46 PM #23 Text 0 File BurnAtOnceRecorder.cpp, Line 2699
Finished writing file VTS_01_2.VOB of size 1073739776 bytes (524287 sectors)
9:42:46 PM #24 Text 0 File BurnAtOnceRecorder.cpp, Line 2310
Added extra file VTS_01_3.VOB
9:42:46 PM #25 Text 0 File BurnAtOnceRecorder.cpp, Line 1427
Writing VTS_01_3.VOB at sector 1049214
9:43:40 PM #26 Text 0 File BurnAtOnceRecorder.cpp, Line 2699
Finished writing file VTS_01_3.VOB of size 138629120 bytes (67690 sectors)
9:43:40 PM #27 Text 0 File BurnAtOnceRecorder.cpp, Line 1427
Writing VTS_01_0.BUP at sector 1116904
9:43:40 PM #28 Text 0 File BurnAtOnceRecorder.cpp, Line 2699
Finished writing file VTS_01_0.BUP of size 45056 bytes (22 sectors)
9:43:41 PM #29 Text 0 File BurnAtOnceRecorder.cpp, Line 1427
Writing VTS_01_0.IFO at sector 592
9:43:43 PM #30 Text 0 File BurnAtOnceRecorder.cpp, Line 2679
Successfully released fragment at 592
9:43:43 PM #31 Text 0 File BurnAtOnceRecorder.cpp, Line 2699
Finished writing file VTS_01_0.IFO of size 45056 bytes (22 sectors)
9:43:55 PM #32 Text 0 File BurnAtOnceRecorder.cpp, Line 664
Successfully released fragment at 640
9:43:56 PM #33 Text 0 File BurnAtOnceRecorder.cpp, Line 689
Reserved fragment at 1116944. Length: 48
9:43:56 PM #34 Text 0 File BurnAtOnceRecorder.cpp, Line 1427
Writing VTS_02_1.VOB at sector 1116992
9:50:55 PM #35 Text 0 File BurnAtOnceRecorder.cpp, Line 2699
Finished writing file VTS_02_1.VOB of size 1073739776 bytes (524287 sectors)
9:50:55 PM #36 Text 0 File BurnAtOnceRecorder.cpp, Line 2310
Added extra file VTS_02_2.VOB
9:50:55 PM #37 Text 0 File BurnAtOnceRecorder.cpp, Line 1427
Writing VTS_02_2.VOB at sector 1641279
9:57:38 PM #38 Text 0 File BurnAtOnceRecorder.cpp, Line 2699
Finished writing file VTS_02_2.VOB of size 1033637888 bytes (504706 sectors)
9:57:38 PM #39 Text 0 File BurnAtOnceRecorder.cpp, Line 1427
Writing VTS_02_0.BUP at sector 2145985
9:57:38 PM #40 Text 0 File BurnAtOnceRecorder.cpp, Line 2699
Finished writing file VTS_02_0.BUP of size 43008 bytes (21 sectors)
9:57:39 PM #41 Text 0 File BurnAtOnceRecorder.cpp, Line 1427
Writing VTS_02_0.IFO at sector 1116944
9:57:40 PM #42 Text 0 File BurnAtOnceRecorder.cpp, Line 2679
Successfully released fragment at 1116944
9:57:40 PM #43 Text 0 File BurnAtOnceRecorder.cpp, Line 2699
Finished writing file VTS_02_0.IFO of size 43008 bytes (21 sectors)
9:57:40 PM #44 Text 0 File BurnAtOnceRecorder.cpp, Line 1433
Buffering VIDEO_TS.IFO
9:57:40 PM #45 Text 0 File BurnAtOnceRecorder.cpp, Line 2641
Finished buffering file VIDEO_TS.IFO of size 6144 bytes (3 sectors)
9:57:40 PM #46 Text 0 File BurnAtOnceRecorder.cpp, Line 2699
Finished writing file VIDEO_TS.IFO of size 6144 bytes (3 sectors)
9:57:40 PM #47 Text 0 File BurnAtOnceRecorder.cpp, Line 1433
Buffering VIDEO_TS.BUP
9:57:40 PM #48 Text 0 File BurnAtOnceRecorder.cpp, Line 2641
Finished buffering file VIDEO_TS.BUP of size 6144 bytes (3 sectors)
9:57:40 PM #49 Text 0 File BurnAtOnceRecorder.cpp, Line 2699
Finished writing file VIDEO_TS.BUP of size 6144 bytes (3 sectors)
9:57:40 PM #50 Phase 175 File APIProgress.cpp, Line 282
Finalizing disc started
9:57:40 PM #51 ISO9660GEN -11 File Geniso.cpp, Line 3349
First writeable address = 0 (0x00000000)
9:57:40 PM #52 ISO9660GEN -11 File Geniso.cpp, Line 3349
First writeable address = 0 (0x00000000)
9:57:40 PM #53 Text 0 File BurnAtOnceRecorder.cpp, Line 3341
Writing filesystem of size 1114112 at sector 0
9:57:42 PM #54 Text 0 File BurnAtOnceRecorder.cpp, Line 3024
Writing VIDEO_TS.IFO at sector 544
9:57:42 PM #55 Text 0 File BurnAtOnceRecorder.cpp, Line 3052
Writing VIDEO_TS.BUP at sector 560
9:58:02 PM #56 Phase 177 File APIProgress.cpp, Line 282
Disc finalized successfully
9:58:02 PM #57 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
9:58:02 PM #58 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
9:58:02 PM #59 Text 0 File Cdrdrv.cpp, Line 11450
DriveLocker: UnLockVolume completed
9:58:06 PM #60 Phase 37 File APIProgress.cpp, Line 282
Burn process completed successfully at 4x (5,540 KB/s)
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
----- End NeroAPI error log -----
21:58:07 File burn_dvdfiles.cpp, Line 307
Compile DVD: exit
"sorry if this is a double post and has already been answered. I looked and couldn't find another post with the same situation"
Thanks!
|
|
Advertisement
|
 |
|
|
AfterDawn Addict
|
8. March 2009 @ 10:21 |
Link to this message
|
Try updating your firmware and turning on your DMA.
If this should fail, try another brand of DL disc preferably Verbatim +R.
99% of all problems are between the computer and the chair.
|
|
Sclaw23
Newbie
|
8. March 2009 @ 14:53 |
Link to this message
|
|
how do you turn on your DMA? i read another post about uninstalling the drive then rebooting and it auto re installs but that didn't turn the DMA back on =/
|
AfterDawn Addict
|
8. March 2009 @ 16:03 |
Link to this message
|
|
|
grampyga
Member
|
8. March 2009 @ 16:30 |
Link to this message
|
Just noticed,
Your log shows successful burn (+R media with x4). Please post the log with the error for the next time.
Also, your log shows Nero has failed booktyping as DVD-ROM. Updating firmware must solve this problem. Check the log after updating your firmware and burning.
Good luck.
|
|
Sclaw23
Newbie
|
8. March 2009 @ 17:45 |
Link to this message
|
do you know where i could find the firmware for it? i've tried searching google and got nothing =x
|
|
grampyga
Member
|
8. March 2009 @ 17:59 |
Link to this message
|
|
|
|
Sclaw23
Newbie
|
8. March 2009 @ 22:00 |
Link to this message
|
okay well i updated the firmware on my sony. Also i read other posts on how to turn DMA on and i did exactly what it says. It shows that my DMA is on but in a the nero.txt after im done burning it says that DMA:0ff. i have no clue why this happened. Also after doing all these steps i still get the same error but it still successfully burns the dvd just very slow. here are some images of the Device Manager showing my DMA
The last picture is what all the other IDE channels showed in the Advanced tab. The middle picture shows the DMA at Ultra DMA mode 5 which indicates DMA is on if im correct?
Any other idea's?
|
|
grampyga
Member
|
8. March 2009 @ 22:41 |
Link to this message
|
I?m not so familiar with this SATA interface. It seems you have 8 ports.
I believe second picture, which is showing both ?Ultra DMA Mode 5? as Current Transfer mode, is your HD?s.
Find the IDE Channel that shows ?PIO? as Current Transfer mode. That is the channel your ODD's are connected. (?Not Applicable? are the one still open - not connected.)
Uninstall that driver and restart PC. Then check again.
I hope this helps,
(Edit)
You might have to uninstall all primary and secondary IDE channels.
This message has been edited since posting. Last time this message was edited on 8. March 2009 @ 22:58
|
|
Sclaw23
Newbie
|
8. March 2009 @ 23:59 |
Link to this message
|
|
so if all of them say DMA if available that means i should uninstall all the secondary/primary IDE's then restart?
|
AfterDawn Addict
|
9. March 2009 @ 00:02 |
Link to this message
|
|
Secondary.
99% of all problems are between the computer and the chair.
|
|
Sclaw23
Newbie
|
9. March 2009 @ 00:06 |
Link to this message
|
oh ok. But if the one IDE that shows as Ultra DMA 5 Mode and is a Primary IDE wouldn't that mean that my drives are Primary?
|
|
grampyga
Member
|
9. March 2009 @ 00:22 |
Link to this message
|
I think your motherboard has 8 SATA ports ? 4 Primary and 4 Secondary(?). As in your log, your HDd?s are using port2, and DMA?s are on. Your ODD?s are using port8, which shows DMA is off (Means using PIO mode). You should find one of IDE channels shows PIO as Current Transfer Mode which are for your ODD?s.
|
|
Sclaw23
Newbie
|
9. March 2009 @ 00:25 |
Link to this message
|
that is the thing i dont get =x. every single IDE (primary and secondary) shows "DMA if available". So there is no PIO mode for me to uninstall =x
|
|
grampyga
Member
|
9. March 2009 @ 00:39 |
Link to this message
|
|
I understand Transfer Mode might be set to ?DMA if available? for all channels. You need to look for PIO as Current Transfer Mode (just below the Transfer Mode.)
|
|
Sclaw23
Newbie
|
9. March 2009 @ 00:41 |
Link to this message
|
|
all of them say "Not Applicable" besides the primary that says Ultra DMA 5 Mode
|
|
grampyga
Member
|
9. March 2009 @ 00:46 |
Link to this message
|
|
Try uninstall all of those channels excpet the one for HDD, the restart and check again.
If still same, try uninstall all of them include HDD's.
Then chack again.
|
|
Sclaw23
Newbie
|
9. March 2009 @ 01:12 |
Link to this message
|
k i did just the primary's and secondary's and everything stayed the same. So then i uninstalled every IDE i had and it still stays the same lol. Any other ideas on the situation?
|
|
grampyga
Member
|
9. March 2009 @ 07:04 |
Link to this message
|
Sorry being late to reply. I couldn?t stay up. I think I've misunderstood your system.
Somehow I thought you all your HDD?s and ODD?s are SATA. Actually are all of those IDE (ATAPI)?
Could you tell me how it connected and configured (master/slave)?
I understand ODD may be slow, though are drives (2 HDD?s and 2 ODD?s) are working ?
|
|
Sclaw23
Newbie
|
9. March 2009 @ 16:10 |
Link to this message
|
I'm a little new when it comes to computer stuff. all i know is that i have no SATA connections and that i have 2 HD's and 2 DVD drives. Dunno if that's what your wanting to know or not =x
|
|
Advertisement
|
|
|
|
grampyga
Member
|
9. March 2009 @ 17:26 |
Link to this message
|
If your system is like mine you have 2 IDE connections on the motherboard. One is primary and the other is secondary. Both can connect up to 2 drives. One as master and the other as slave. Each drive has little jumper pin to set Master, Slave or Cable Select.
I have 2 HDD and 2 ODD (one burner and one DVD-Rom). When I go to Device manager I only see one Primary and one secondary IDE channel. I was wondering that if you still see Primary and Secondary 4 each, you might have configuration problem that preventing to put your ODD back to DMA mode.
If your all drives are working. I do not know why it shows as ?Not Applicable? as Current Transfer Mode.
Can anyone, maybe who install the drive(?), check those jumpers are set right?
|
|
