|
|
|
Nero 6- buffer underruns at finalization ONLY
|
|
|
Mopy
Suspended due to non-functional email address
|
9. April 2004 @ 14:40 |
Link to this message
|
|
MY buffer keep underrunning at finalization only it writes the whole disc perfect, but then at the disc-at-once it messes up and says " failed writing in 8x..." i tried 4x same thing someone plz help me!(i just upgrade my memory to 512mb and it was working fine before that)could it be t he memory?
|
|
Advertisement
|
|
|
|
|
RWG
Senior Member
|
10. April 2004 @ 19:09 |
Link to this message
|
|
Could be your memory - may ned more. Is this just on one DVD or more? What is your hardware and software setup?
CPU?
OS?
Ripper?
Burner?
NEC-2500A - Sony DVD-ROM
WinXP Pro w/ SP2, DVD Shrink - DVD Decrypter - Nero 7.x - CloneDVD2 & AnyDVD - DVD Fab - RipIt4Me
|
|
Mopy
Suspended due to non-functional email address
|
14. April 2004 @ 11:36 |
Link to this message
|
|
I dont need more memory because before when i had 128mb ram it worked fine. now i have 512 mb and my comp. is flying.
60 gig hard drive
1.0ghz amd athlon
windows xp pro
dvd shrink 3.1
Nero(latest) 6.3
Generic 8x dual format dvd+rw/r
I cant even burn a data disk it says i loged the problem and this is the file:
(its long)
#1 Text 0 File Isodoc.cpp, Line 6062
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
10:57:54 AM #2 Phase 72 File dlgbrnst.cpp, Line 1841
BURN-Proof activated
10:57:54 AM #3 Text 0 File Reader.cpp, Line 118
Reader running
10:57:54 AM #4 Text 0 File Writer.cpp, Line 124
Writer GENERIC DVD RW 8XMax running
10:57:54 AM #5 ISO9660GEN -11 File geniso.cpp, Line 3898
First writeable address = 0 (0x00000000)
10:57:54 AM #6 Text 0 File Burncd.cpp, Line 3198
Turn on Track-at-once, using CD-R/RW media
10:57:54 AM #7 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 359847 ( 79:59.72)
Last address to be written: 28855 ( 6:26.55)
10:57:54 AM #8 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE
10:57:54 AM #9 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: GENERIC DVD RW 8XMax;
CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation
ATIP Data:
Special Info [hex] 1: D0 00 98, 2: 61 1A 42 (LI 97:26.66), 3: 4F 3B 49 (LO 79:59.73)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
10:57:54 AM #10 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================
10:57:54 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 28856 (28856) = #28856/6:24.56
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 28854 blocks [GENERIC DVD RW 8XMax ]
--------------------------------------------------------------
10:57:55 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [GENERIC DVD RW 8XMax ] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 59404288, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
28856 | lead-out | 1 | 0x00 | 0x41
10:57:55 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1028
Removed 2 run-out blocks from end of track 1. Length: 28856 -> 28854.
10:57:55 AM #14 Phase 24 File dlgbrnst.cpp, Line 1841
Caching of files started
10:57:55 AM #15 Text 0 File Burncd.cpp, Line 4214
Cache writing successful.
10:57:55 AM #16 Phase 25 File dlgbrnst.cpp, Line 1841
Caching of files completed
10:57:55 AM #17 Phase 36 File dlgbrnst.cpp, Line 1841
Burn process started at 40x (6,000 KB/s)
10:57:55 AM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2342
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
10:57:55 AM #19 Text 0 File Mmc.cpp, Line 19864
Set BUFE: BURN-Proof -> ON
10:59:04 AM #20 SCSI -1093 File Cdrdrv.cpp, Line 1437
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x04930000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x02 0x80 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x02 0x00
10:59:04 AM #21 CDR -1093 File Writer.cpp, Line 304
No seek complete
10:59:04 AM #22 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
10:59:05 AM #23 CDR -201 File WriterStatus.cpp, Line 196
Invalid write state
GENERIC DVD RW 8XMax\H1 T1
10:59:05 AM #24 TRANSFER -18 File WriterStatus.cpp, Line 196
Could not perform EndTrack
10:59:05 AM #25 Text 0 File Mmc.cpp, Line 14708
<GENERIC DVD RW 8XMax > start Close Session
10:59:05 AM #26 SCSI -1176 File Cdrdrv.cpp, Line 1183
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x04
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x72 0x04
10:59:05 AM #27 CDR -1176 File WriterStatus.cpp, Line 245
Session fixation error
10:59:05 AM #28 TRANSFER -19 File WriterStatus.cpp, Line 245
Could not perform Fixation
10:59:05 AM #29 Text 0 File WriterStatus.cpp, Line 254
falling back to disc fixation
10:59:05 AM #30 Phase 38 File dlgbrnst.cpp, Line 1841
Burn process failed at 40x (6,000 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 10/28/2003 6:02:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 7/16/2003 12:18:31 PM (Adapter driver for rec)
help me plx ty
|
|
RWG
Senior Member
|
14. April 2004 @ 16:28 |
Link to this message
|
Quote:
CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation
The only thing I can derive from that log is you're using a brand of media, CMC, that lots of people have trouble with.
Did you try removing the new memory you added?
NEC-2500A - Sony DVD-ROM
WinXP Pro w/ SP2, DVD Shrink - DVD Decrypter - Nero 7.x - CloneDVD2 & AnyDVD - DVD Fab - RipIt4Me
|
Senior Member
|
15. April 2004 @ 14:10 |
Link to this message
|
|
I think it sound like the media is faulty.Going back a while when i had my old dvd writer which was the pioneer 104 i kept getting a power calibration error.I did everything re formatted my hard drive the lot as there was no way that a full tub of 50 discs could be faulty.I was gob smacked to find out it was and obviously my supplier got a nice smile off me when i returned them.
Cheers John179
|
|
Mopy
Suspended due to non-functional email address
|
18. April 2004 @ 09:01 |
Link to this message
|
|
I removed the memory yesterday and added the old one. It is now able to burn data disc, but not dvd's. I had installed two 256 mb(one was 168-pin DIMM sdram pc133) (and other was SDRAM 256 MB "UNBUFF") chip both different. when i took at the cheapest one i read the chip and the chip said "unbuff" so i replace that one with the old chip and left the other one installed. I know have 384 mb of memory. I just tried to burn abnother dvd at 4x and this is what happend :
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 57671680 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 383MB (392688kB)
Free physical memory: 93MB (95612kB)
Memory in use : 75 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
18.4.2004
UDF/ISO compilation
12:42:54 PM #1 Phase 112 File dlgbrnst.cpp, Line 1841
DVD-Video files reallocation started
12:42:54 PM #2 Phase 114 File dlgbrnst.cpp, Line 1841
DVD-Video files reallocation completed (no file modified)
12:42:54 PM #3 Text 0 File Isodoc.cpp, Line 6062
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
12:42:54 PM #4 Phase 111 File dlgbrnst.cpp, Line 1841
DVD-Video files sorted
12:42:54 PM #5 Text 0 File Reader.cpp, Line 118
Reader running
12:42:54 PM #6 Text 0 File Writer.cpp, Line 124
Writer GENERIC DVD RW 8XMax running
12:42:54 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3898
First writeable address = 0 (0x00000000)
12:42:54 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3898
First writeable address = 0 (0x00000000)
12:42:54 PM #9 Text 0 File Burncd.cpp, Line 3198
Turn on Disc-at-once, using DVD media
12:42:54 PM #10 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2141631 (475:55.06, 4182MB)
12:42:54 PM #11 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE
12:42:54 PM #12 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: GENERIC DVD RW 8XMax, Media type: DVD+R
Disc Manufacturer ID: CMC MAG, Media Type ID: F01, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 1
12:42:54 PM #13 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:42:54 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2141632 (2141632) = #2141632/475:55.7
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2141632 blocks [GENERIC DVD RW 8XMax ]
--------------------------------------------------------------
12:42:54 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [GENERIC DVD RW 8XMax ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4386062336, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2141632 | lead-out | 1 | 0x00 | 0x41
12:42:55 PM #16 Phase 24 File dlgbrnst.cpp, Line 1841
Caching of files started
12:42:55 PM #17 Text 0 File Burncd.cpp, Line 4214
Cache writing successful.
12:42:55 PM #18 Phase 25 File dlgbrnst.cpp, Line 1841
Caching of files completed
12:42:55 PM #19 Phase 32 File dlgbrnst.cpp, Line 1841
Simulation started at 4x (5,520 KB/s)
12:42:55 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2342
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:42:55 PM #21 Text 0 File Cdrdrv.cpp, Line 8002
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: CMC.MAG.
Media type ID: F01
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 01 43 4D 43 20 4D - 41 47 00 46 30 31 00 38 ...CMC.MAG.F01.8
23 54 37 10 02 48 71 02 - 8C 69 16 16 0B 0B 0A 0A #T7..Hq..i......
01 1D 1E 0C 0C 12 12 01 - 00 00 00 00 00 00 00 00 ................
12:42:55 PM #22 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 13:25,508 (805508ms) -> OK
12:42:55 PM #23 Text 0 File DVDPlusRW.cpp, Line 618
Start write address at LBA 0
DVD high compatibility mode: Yes
12:56:05 PM #24 Text 0 File WriterStatus.cpp, Line 115
<GENERIC DVD RW 8XMax > start writing Lead-Out at LBA 2141632 (20ADC0h), lenght 0 blocks
12:56:05 PM #25 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
12:56:35 PM #26 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 0:00,000 (0ms) -> OK
12:56:35 PM #27 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 0:00,000 (0ms) -> OK
12:56:35 PM #28 Phase 33 File dlgbrnst.cpp, Line 1841
Simulation completed successfully at 4x (5,520 KB/s)
12:56:36 PM #29 Phase 36 File dlgbrnst.cpp, Line 1841
Burn process started at 4x (5,520 KB/s)
12:56:36 PM #30 Text 0 File ThreadedTransferInterface.cpp, Line 2342
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:56:36 PM #31 CDR -1066 File ThreadedTransferInterface.cpp, Line 1579
Invalid field in command
12:56:36 PM #32 TRANSFER -35 File ThreadedTransferInterface.cpp, Line 1579
Invalid track info
12:56:36 PM #33 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 0:00,000 (0ms) -> OK
12:56:36 PM #34 Phase 38 File dlgbrnst.cpp, Line 1841
Burn process failed at 4x (5,520 KB/s)
THANKS FOT THE HELP. I am now hoing to try to burn it a dvd in safe mode.
|
AfterDawn Addict
|
18. April 2004 @ 11:42 |
Link to this message
|
Hi Mopy,
From your first log:
Burn process started at 40X
also....
Multisession : TRUE
Multisession type: : Start multisession
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Second log:
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
A good place to start would be to make these all false, under the ISO tab.
It looks like your using the Memorex +R (Disc Manufacturer ID: CMC.MAG.
Media type ID: F01). Memorex gets its stuff from two different mfgs. This is not the stuff you want to use to make DVDs with. It will work fine for data discs. I think the "good" Memorex will show as "Disc Manufacturer: Prodis - cS03". Lots of people report problems with Memorex so most of us recommend Ritek G-04 or Verbatim.
If you still want to use it, Go into Shrink> Edit> Pefrences> Target DVD size and change from DVD-5 to custom and reduce the size of the disc about 100 MB or so. That way you are not trying to burn out to the edge of the disc.
See if it helps.
I don't think its your memory. What kind of media were you using before this problem started?
Cheers,
Frank
|
|
robrug
Suspended due to non-functional email address
|
19. April 2004 @ 08:27 |
Link to this message
|
I have had the same kind of problem.
Finally I found out that the cause lay with other programs that were loaded at Windows start and that interfered with Nero.
My suggestion: try to start Windows with as few resident programs as possible. Can you burn now ok?
If so, add one of two startup programs, then try burning a dvd again. And so on.
Btw: in this process I found I had many spyware programs running that I was not aware of. I killed these of course and now Nero is working fine again.
|
AfterDawn Addict
|
19. April 2004 @ 09:20 |
Link to this message
|
hi all
i noticed this too!
First log!
================================
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE <<<<<<<<<<<
Multisession : TRUE <<<<<<<<<<<
Multisession type: : Start multisession <<<<<<<<<
Burning mode : TAO <<<<<<<<<
================================
second log!
================================
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
================================
both times they are different! also second you changed ram! but it may have been settings after all?
thx
also just noticed this! in both!
===========================
Write ISO9660 ;1 file extensions : TRUE
===========================
i think that is for making bootable cdr's? but dont quote me?
i use these settings for dvdr!
Nothing here to see, move along folks.
 This message has been edited since posting. Last time this message was edited on 19. April 2004 @ 09:37
|
|
Mopy
Suspended due to non-functional email address
|
22. April 2004 @ 13:59 |
Link to this message
|
|
WELL I APPRECIATE ALL OF YOU TRYING TO HELP ME. So let me first of say Thank You all. Now I dont think its is the Memorex dvd's because I have burned one perfectly and that was the last one. It worked fine. Second it cant be the startup programs beacuse I have tried burning it in Safe Mode. Third the media I was using was the same i have not changed anything except the memory. I now will try to use Rotary style of buring dvd's because I have been using "DVD- VIDEO" (CAN THAT BE THE PROBLEM?) well I let you know how ROTARY'S style goes
thank you
|
|
happynow
Suspended due to non-functional email address
|
22. April 2004 @ 14:13 |
Link to this message
|
|
Hi,
A few things to try.
Make sure DMA is still enabled, sometimes windows will change to PIO for no reason.
Download the Nero "registry Checker" from the Ahead website. Double click it, if all is well it will just close. If there is a problem it will fix it and tell you to reboot. I used to have exact same problem with my old Sony drive it wasn't "buffer underun" though I thought it was like yourself. When there is a buffer underun it actualy says so in the log.
Better still uninstall Nero and reinstall with Latest Version 6.3.1.6
If using Winxp make sure the windows Burning facility is turned off in Admin tools "Services".
Also stick with the default "DVD-Video" option, I have burnt well over 700 discs in that mode and never found any problems with it.
P.S. I just noticed at the bottom of the details post you have PXHelp** listed. This is part of Veritas/Sonic Recordnow dx software so I would say you had a software conflict for sure.
Remove all software to do with burning then install Nero.
I would also go into registry and manually remove any burning software remnants, look particulary for recordnow entries.
ESPECIALLY here: [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}]
"Class"="CDROM"
Look for Lowerfilters entries and delete any Lowerfilters entries. There may be 2 or 3 depending on software used.
Then reboot.
Install Nero and burn.
This message has been edited since posting. Last time this message was edited on 22. April 2004 @ 15:06
|
|
Mopy
Suspended due to non-functional email address
|
22. April 2004 @ 20:44 |
Link to this message
|
well i tried rotarys style and it didn't work, then i checked the Dma and it was in PIO so i changed it to dma i a m going to uninstall everything that is for burning and just reinstall Nero. Also will do the registry and tell you how it works out.
|
|
Mopy
Suspended due to non-functional email address
|
22. April 2004 @ 21:29 |
Link to this message
|
|
Well I did every single thing u told me Uninstalled, registries, the registry check(fixed some error that it found), Dma, ect. I tried to burn another DVD after all that and still no luck. Im beginning to wonder if i have a curse. I will include a log of the most recent failure. I DONT UNDERSTAND, IT COPIES TO 100% , THEN THE BUFFER JUST FALLS FROM 100% TO 0
The log is:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 7:18:06 PM
Nero version: 6.3.1.6
Recorder: <GENERIC DVD RW 8XMax> Version: 120I - HA 1 TA 1 - 6.3.1.6
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <COMPAQ DVD-ROM SD-612B >Version: BL10 - HA 1 TA 0 - 6.3.1.6
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 36147H8 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : COMPAQ DVD-ROM SD-612B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : GENERIC DVD RW 8XMax atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
COMPAQ DVD-ROM SD-612B E: CDRom0
GENERIC DVD RW 8XMax F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 57671680 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 383MB (392688kB)
Free physical memory: 139MB (143184kB)
Memory in use : 63 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
23.4.2004
UDF/ISO compilation
1:07:40 AM #1 Phase 112 File dlgbrnst.cpp, Line 1841
DVD-Video files reallocation started
1:07:41 AM #2 Phase 114 File dlgbrnst.cpp, Line 1841
DVD-Video files reallocation completed (no file modified)
1:07:41 AM #3 Text 0 File Isodoc.cpp, Line 6062
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
1:07:41 AM #4 Phase 111 File dlgbrnst.cpp, Line 1841
DVD-Video files sorted
1:07:41 AM #5 Text 0 File Reader.cpp, Line 118
Reader running
1:07:41 AM #6 Text 0 File Writer.cpp, Line 124
Writer GENERIC DVD RW 8XMax running
1:07:41 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3898
First writeable address = 0 (0x00000000)
1:07:41 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3898
First writeable address = 0 (0x00000000)
1:07:41 AM #9 Text 0 File Burncd.cpp, Line 3198
Turn on Disc-at-once, using DVD media
1:07:41 AM #10 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2141631 (475:55.06, 4182MB)
1:07:41 AM #11 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE
1:07:41 AM #12 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: GENERIC DVD RW 8XMax, Media type: DVD+R
Disc Manufacturer ID: CMC MAG, Media Type ID: F01, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 1
1:07:41 AM #13 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================
1:07:41 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2141632 (2141632) = #2141632/475:55.7
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2141632 blocks [GENERIC DVD RW 8XMax ]
--------------------------------------------------------------
1:07:41 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [GENERIC DVD RW 8XMax ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4386062336, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2141632 | lead-out | 1 | 0x00 | 0x41
1:07:42 AM #16 Phase 24 File dlgbrnst.cpp, Line 1841
Caching of files started
1:07:42 AM #17 Text 0 File Burncd.cpp, Line 4214
Cache writing successful.
1:07:42 AM #18 Phase 25 File dlgbrnst.cpp, Line 1841
Caching of files completed
1:07:42 AM #19 Phase 32 File dlgbrnst.cpp, Line 1841
Simulation started at 4x (5,520 KB/s)
1:07:42 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2342
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
1:07:42 AM #21 Text 0 File Cdrdrv.cpp, Line 8002
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: CMC.MAG.
Media type ID: F01
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 01 43 4D 43 20 4D - 41 47 00 46 30 31 00 38 ...CMC.MAG.F01.8
23 54 37 10 02 48 71 02 - 8C 69 16 16 0B 0B 0A 0A #T7..Hq..i......
01 1D 1E 0C 0C 12 12 01 - 00 00 00 00 00 00 00 00 ................
1:07:42 AM #22 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 13:25,508 (805508ms) -> OK
1:07:42 AM #23 Text 0 File DVDPlusRW.cpp, Line 618
Start write address at LBA 0
DVD high compatibility mode: Yes
1:20:54 AM #24 Text 0 File WriterStatus.cpp, Line 115
<GENERIC DVD RW 8XMax > start writing Lead-Out at LBA 2141632 (20ADC0h), lenght 0 blocks
1:20:54 AM #25 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
1:21:24 AM #26 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 0:00,000 (0ms) -> OK
1:21:24 AM #27 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 0:00,000 (0ms) -> OK
1:21:24 AM #28 Phase 33 File dlgbrnst.cpp, Line 1841
Simulation completed successfully at 4x (5,520 KB/s)
1:21:25 AM #29 Phase 36 File dlgbrnst.cpp, Line 1841
Burn process started at 4x (5,520 KB/s)
1:21:25 AM #30 Text 0 File ThreadedTransferInterface.cpp, Line 2342
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
1:21:25 AM #31 CDR -1066 File ThreadedTransferInterface.cpp, Line 1579
Invalid field in command
1:21:25 AM #32 TRANSFER -35 File ThreadedTransferInterface.cpp, Line 1579
Invalid track info
1:21:25 AM #33 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 0:00,000 (0ms) -> OK
1:21:25 AM #34 Phase 38 File dlgbrnst.cpp, Line 1841
Burn process failed at 4x (5,520 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 10/28/2003 6:02:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 7/16/2003 12:18:31 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
happynow
Suspended due to non-functional email address
|
22. April 2004 @ 23:02 |
Link to this message
|
|
I notice PXHelp20.sys is still there, so you still have files from other proggs.
Your problem is when it is trying to write the lead out. Which is the bit it does when the buffer drops to zero.
I had the exact same problem with my Sony DRU500a last year. I can't remember exactly how I cured it, but the stuff earlier was some stuff I tried. It wasn't the drive or media. As eventualy I got it running as it should be.
Go to start/search and in the search prog go to "all files and folders" in top enter "pxhelp*.* then in "look in" pick c: drive then click on more adanced options and tick
search system folders
search hidden folders
search subfolders
Then do a search,, it should come up with 3 or more files all starting with PXHelp
As in
PXHelp20.sys
PxHelp20.pnf
Pxhelp20.inf
Delete them and reboot.
You could also try this, depending what IDE Controller drivers you are using. I always use the Windows defaullt Dual Channel Ide Drivers.
Go to Device manager and uninstal "IDE Controller drivers" so there are none at all.
When you reboot windows will reinstall them.
Then check them to make sure DMA is enabled, then try another burn.
Use a Rewritable to check.
If none of this works, maybe a format and reinstall is all thats left.
Good Luck.
This message has been edited since posting. Last time this message was edited on 22. April 2004 @ 23:02
|
AfterDawn Addict
|
22. April 2004 @ 23:08 |
Link to this message
|
|
hi there
ok, firstly you may be one of those users that nero v6 sucks for! (50/50 with users here!) as i have had 3 versons of v6 and all had errors at start of writing even on DATA aswell as dvd!
here is nero v5 (I USE v5 TOO!!!!) the picture above is v5
ftp://ftp4.nero.com/Nero551056.exe
also in your log above i see this!!
==================================
1:07:41 AM #10 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 2295103 (510:01.28, 4482MB) <----- SEEMS TOO BIG ???????
Last address to be written: 2141631 (475:55.06, 4182MB) <----- SEEMS TOO BIG ???????
==================================
now it may be the size of dvdr its reading and be fine? or it may be the files you have??? should be about 4.36gig to fit a dvdR
but uninstall nro v6 and try v5! i have used it for 4/5 years!!!!
THx...
EDIT:
Just a thought? you dont have your hard drive on the same eide cable as the dvd writer do you?
as mine is on primary master on its own! my HD's are raid of serial ata (not normal eide channels!)
list how you have all drives and hd's setup please!!!!!
Nothing here to see, move along folks.
This message has been edited since posting. Last time this message was edited on 22. April 2004 @ 23:14
|
|
Mopy
Suspended due to non-functional email address
|
23. April 2004 @ 12:59 |
Link to this message
|
|
well i deleted those three files. and uninstalled the driver and let windows reinstall it automatically and this is what i got:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 7:18:06 PM
Nero version: 6.3.1.6
Recorder: <GENERIC DVD RW 8XMax> Version: 120I - HA 1 TA 1 - 6.3.1.6
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <COMPAQ DVD-ROM SD-612B >Version: BL10 - HA 1 TA 0 - 6.3.1.6
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 36147H8 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : COMPAQ DVD-ROM SD-612B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : GENERIC DVD RW 8XMax atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
COMPAQ DVD-ROM SD-612B E: CDRom0
GENERIC DVD RW 8XMax F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 57671680 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 383MB (392688kB)
Free physical memory: 149MB (153208kB)
Memory in use : 60 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
23.4.2004
UDF/ISO compilation
4:40:40 PM #1 Phase 112 File dlgbrnst.cpp, Line 1841
DVD-Video files reallocation started
4:40:40 PM #2 Phase 114 File dlgbrnst.cpp, Line 1841
DVD-Video files reallocation completed (no file modified)
4:40:41 PM #3 Text 0 File Isodoc.cpp, Line 6062
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
4:40:41 PM #4 Phase 111 File dlgbrnst.cpp, Line 1841
DVD-Video files sorted
4:40:41 PM #5 Text 0 File Reader.cpp, Line 118
Reader running
4:40:41 PM #6 Text 0 File Writer.cpp, Line 124
Writer GENERIC DVD RW 8XMax running
4:40:41 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3898
First writeable address = 0 (0x00000000)
4:40:41 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3898
First writeable address = 0 (0x00000000)
4:40:41 PM #9 Text 0 File Burncd.cpp, Line 3198
Turn on Disc-at-once, using DVD media
4:40:41 PM #10 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2141631 (475:55.06, 4182MB)
4:40:41 PM #11 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE
4:40:41 PM #12 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: GENERIC DVD RW 8XMax, Media type: DVD+R
Disc Manufacturer ID: CMC MAG, Media Type ID: F01, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 1
4:40:41 PM #13 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================
4:40:41 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2141632 (2141632) = #2141632/475:55.7
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2141632 blocks [GENERIC DVD RW 8XMax ]
--------------------------------------------------------------
4:40:41 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [GENERIC DVD RW 8XMax ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4386062336, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2141632 | lead-out | 1 | 0x00 | 0x41
4:40:42 PM #16 Phase 24 File dlgbrnst.cpp, Line 1841
Caching of files started
4:40:42 PM #17 Text 0 File Burncd.cpp, Line 4214
Cache writing successful.
4:40:42 PM #18 Phase 25 File dlgbrnst.cpp, Line 1841
Caching of files completed
4:40:42 PM #19 Phase 32 File dlgbrnst.cpp, Line 1841
Simulation started at 4x (5,520 KB/s)
4:40:42 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2342
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
4:40:42 PM #21 Text 0 File Cdrdrv.cpp, Line 8002
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: CMC.MAG.
Media type ID: F01
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 01 43 4D 43 20 4D - 41 47 00 46 30 31 00 38 ...CMC.MAG.F01.8
23 54 37 10 02 48 71 02 - 8C 69 16 16 0B 0B 0A 0A #T7..Hq..i......
01 1D 1E 0C 0C 12 12 01 - 00 00 00 00 00 00 00 00 ................
4:40:42 PM #22 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 13:25,508 (805508ms) -> OK
4:40:42 PM #23 Text 0 File DVDPlusRW.cpp, Line 618
Start write address at LBA 0
DVD high compatibility mode: Yes
4:54:06 PM #24 Text 0 File WriterStatus.cpp, Line 115
<GENERIC DVD RW 8XMax > start writing Lead-Out at LBA 2141632 (20ADC0h), lenght 0 blocks
4:54:06 PM #25 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
4:54:36 PM #26 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 0:00,000 (0ms) -> OK
4:54:36 PM #27 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 0:00,000 (0ms) -> OK
4:54:36 PM #28 Phase 33 File dlgbrnst.cpp, Line 1841
Simulation completed successfully at 4x (5,520 KB/s)
4:54:37 PM #29 Phase 36 File dlgbrnst.cpp, Line 1841
Burn process started at 4x (5,520 KB/s)
4:54:37 PM #30 Text 0 File ThreadedTransferInterface.cpp, Line 2342
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
4:54:37 PM #31 CDR -1066 File ThreadedTransferInterface.cpp, Line 1579
Invalid field in command
4:54:37 PM #32 TRANSFER -35 File ThreadedTransferInterface.cpp, Line 1579
Invalid track info
4:54:37 PM #33 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 0:00,000 (0ms) -> OK
4:54:37 PM #34 Phase 38 File dlgbrnst.cpp, Line 1841
Burn process failed at 4x (5,520 KB/s)
Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 7/16/2003 12:18:31 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Mopy
Suspended due to non-functional email address
|
23. April 2004 @ 13:00 |
Link to this message
|
i am now going to try Nero 5 to see if i have any luck :) crossing my fingers.
|
|
Mopy
Suspended due to non-functional email address
|
23. April 2004 @ 13:03 |
Link to this message
|
|
oh yea... and no i dont have the hd connected to the dvd writer... i have it connected to motherboard as the primary master now(before it was the slave of the the orignial wirter)
|
|
happynow
Suspended due to non-functional email address
|
23. April 2004 @ 14:41 |
Link to this message
|
|
Hi again, I just been looking through your log file and noticed this.
Yours
Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 7/16/2003 12:18:31 PM (Adapter driver for rec)
Mine
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 29/08/2002 02:27:50 (Adapter driver for rec)
Both the same file both same version both xpsp1, BUT different creation date. I vaigly remember changing this when I was haveing problems.
It won't hurt to change it, if you want I can email it to you it's only 86kb. Just copy/paste.
Another thing that might work.
Run System File Checker, it will search through system files and repair any corrupt system files.
Go to Start/Run and type "sfc /scannow"
All the best.
You will need your Winxp cd in the drive.
P.S.
After studying your log files I have noticed a few other things.
First log file is for a CD not DVD unless you have 40x DVD's.
You say "bufferunderrun" at end.
Well after studying closer I notice this.
Simulation Starts at 12-42-54 sec
Simulation finishes at 12-56-35 sec
Around 15 mins which is correct for 4x
Then burn process starts at 12:56:36
Burn process fails at 12:56:36
So it is failing at the start of the burn not at the end.
Same with second log failed at start after simulation completes.
What is the actual Make and Model number of your writer? only info you have given is GENERIC
This message has been edited since posting. Last time this message was edited on 23. April 2004 @ 16:01
|
AfterDawn Addict
|
23. April 2004 @ 22:29 |
Link to this message
|
hi there
ok, so you used Nero v5 and had the same results yes?
There is something more here!!! i would pull out and change round your eide cables with a HD (swap round!) see if its hardware based, really you need another burner to try! as it may have gone (the laser?)
Use Nero "info tool" to check your aspi layer is working! in start menu under nero/tools
Also use Nero "Drivespeed" this tests sped of each drive! and lets Nero associate they drives to Nero for usage!
and lasty upgrade your firmware on the dvd writer!
Thx...
Nothing here to see, move along folks.
|
|
Mopy
Suspended due to non-functional email address
|
23. April 2004 @ 22:59 |
Link to this message
|
well I did change the cable connecting the dvd writer and now i got tired of all this...so i went ahead and formated the drive and installed windows xp and everything else including Nero 6.3 and guess what...... i got the same results. I now know it cant be software, but it not the writer because it writes cd's fine. Here is a Log after the format.
:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 7:18:06 PM
Nero version: 6.3.1.6
Recorder: <GENERIC DVD RW 8XMax> Version: 120I - HA 1 TA 0 - 6.3.1.6
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <GENERIC DVD RW 8XMax >Version: 120I - HA 1 TA 0 - 6.3.1.6
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 36147H8 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : GENERIC DVD RW 8XMax atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
GENERIC DVD RW 8XMax E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 57671680 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 383MB (392688kB)
Free physical memory: 219MB (225120kB)
Memory in use : 42 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
24.4.2004
UDF/ISO compilation
2:09:48 AM #1 Phase 112 File dlgbrnst.cpp, Line 1841
DVD-Video files reallocation started
2:09:48 AM #2 Phase 114 File dlgbrnst.cpp, Line 1841
DVD-Video files reallocation completed (no file modified)
2:09:48 AM #3 Text 0 File Isodoc.cpp, Line 6062
Iso document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : TRUE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
2:09:48 AM #4 Phase 111 File dlgbrnst.cpp, Line 1841
DVD-Video files sorted
2:09:48 AM #5 Text 0 File Reader.cpp, Line 118
Reader running
2:09:48 AM #6 Text 0 File Writer.cpp, Line 124
Writer GENERIC DVD RW 8XMax running
2:09:48 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3898
First writeable address = 0 (0x00000000)
2:09:48 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3898
First writeable address = 0 (0x00000000)
2:09:48 AM #9 Text 0 File Burncd.cpp, Line 3198
Turn on Disc-at-once, using DVD media
2:09:48 AM #10 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286111 (508:01.36, 4465MB)
2:09:48 AM #11 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE
2:09:48 AM #12 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: GENERIC DVD RW 8XMax, Media type: DVD+R
Disc Manufacturer ID: CMC MAG, Media Type ID: F01, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 1
2:09:48 AM #13 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================
2:09:48 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [GENERIC DVD RW 8XMax ]
--------------------------------------------------------------
2:09:48 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [GENERIC DVD RW 8XMax ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286112 | lead-out | 1 | 0x00 | 0x41
2:09:49 AM #16 Phase 24 File dlgbrnst.cpp, Line 1841
Caching of files started
2:09:49 AM #17 Text 0 File Burncd.cpp, Line 4214
Cache writing successful.
2:09:49 AM #18 Phase 25 File dlgbrnst.cpp, Line 1841
Caching of files completed
2:09:49 AM #19 Phase 28 File dlgbrnst.cpp, Line 1841
Speed measurement started
2:09:49 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2342
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
2:17:32 AM #21 Text 0 File WriterStatus.cpp, Line 115
<GENERIC DVD RW 8XMax > start writing Lead-Out at LBA 2286112 (22E220h), lenght 0 blocks
2:17:32 AM #22 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
2:17:33 AM #23 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 0:00,000 (0ms) -> OK
2:17:33 AM #24 Phase 29 File dlgbrnst.cpp, Line 1792
Speed measurement completed: 7.1x (9,922 KB/s)
2:17:33 AM #25 Text 0 File Burncd.cpp, Line 4279
Can only write at 4x instead of 8x,
because speed of source data is too slow
2:17:33 AM #26 Phase 32 File dlgbrnst.cpp, Line 1841
Simulation started at 4x (5,520 KB/s)
2:17:33 AM #27 Text 0 File ThreadedTransferInterface.cpp, Line 2342
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
2:17:33 AM #28 Text 0 File Cdrdrv.cpp, Line 8002
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: CMC.MAG.
Media type ID: F01
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 01 43 4D 43 20 4D - 41 47 00 46 30 31 00 38 ...CMC.MAG.F01.8
23 54 37 10 02 48 71 02 - 8C 69 16 16 0B 0B 0A 0A #T7..Hq..i......
01 1D 1E 0C 0C 12 12 01 - 00 00 00 00 00 00 00 00 ................
2:17:33 AM #29 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 14:17,667 (857667ms) -> OK
2:17:33 AM #30 Text 0 File DVDPlusRW.cpp, Line 618
Start write address at LBA 0
DVD high compatibility mode: Yes
2:31:37 AM #31 Text 0 File WriterStatus.cpp, Line 115
<GENERIC DVD RW 8XMax > start writing Lead-Out at LBA 2286112 (22E220h), lenght 0 blocks
2:31:37 AM #32 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
2:32:06 AM #33 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 0:00,000 (0ms) -> OK
2:32:06 AM #34 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 0:00,000 (0ms) -> OK
2:32:06 AM #35 Phase 33 File dlgbrnst.cpp, Line 1841
Simulation completed successfully at 4x (5,520 KB/s)
2:32:07 AM #36 Phase 36 File dlgbrnst.cpp, Line 1841
Burn process started at 4x (5,520 KB/s)
2:32:07 AM #37 Text 0 File ThreadedTransferInterface.cpp, Line 2342
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
2:32:07 AM #38 CDR -1066 File ThreadedTransferInterface.cpp, Line 1579
Invalid field in command
2:32:07 AM #39 TRANSFER -35 File ThreadedTransferInterface.cpp, Line 1579
Invalid track info
2:32:07 AM #40 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 0:00,000 (0ms) -> OK
2:32:07 AM #41 Phase 38 File dlgbrnst.cpp, Line 1841
Burn process failed at 4x (5,520 KB/s)
Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 7/16/2003 12:18:31 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
AfterDawn Addict
|
23. April 2004 @ 23:06 |
Link to this message
|
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE <----- THIS ONE!!!
are you ticking the last box? at bottom of pic?
thx
Nothing here to see, move along folks.
|
AfterDawn Addict
|
23. April 2004 @ 23:06 |
Link to this message
|
|
did you install the aspi layer back in?
could be jumper setting on the drive? is it on its own? is the jumper on there or removed? as some drives you remove the jumper altogether!!!
thx...
Nothing here to see, move along folks.
This message has been edited since posting. Last time this message was edited on 23. April 2004 @ 23:12
|
|
Mopy
Suspended due to non-functional email address
|
23. April 2004 @ 23:11 |
Link to this message
|
|
The only thing i can tell you about the writer is that i got it at Best Buy. its mnaufactured by " Digital Research Technologies" and its the "Dvd+Rw/+R dual format Internal 8x DVD ReWritable Drive" str8 from the box. ( i just dont get it......it has made burned succefully one DVD then no more). And it fails at when it reaches 100% simulation then the buffer drops down . then at the bottom by the status bar it says "lead out" then boom all the buffer drops down to 0%
im getting really irriated at this computer.
|
|
Advertisement
|
|
|
|
Mopy
Suspended due to non-functional email address
|
23. April 2004 @ 23:13 |
Link to this message
|
|
Rotary do u have AIM or AOL so i can instant message you since we are both on now
|
|
