Mobile/PDA About Us Advertise here
User User name Password  
  Not registered yet? Register here.
Lost your password? Click here. 		 
  Home   News   Guides   Downloads   Glossary   Hardware   Profiles   Forums   v4  
 Advertise at AfterDawn.com     Link to us!     Private messages     Compose a private message     List of all updated threads     Threads without replies     Search messages
Thursday 12.2.2026 / 02:54
Search AfterDawn Forums:        In English   Suomeksi   På svenska
afterdawn.com > forums > pc hardware > dvd / blu-ray drives > which drives to install on my computer
Show topics
 
Forums
Forums
Which Drives to Install on my Computer
  Jump to:
 
Posted Message
TMcCallie
Member
_ 		25. May 2004 @ 20:01 _ Link to this message    Send private message to this user   
I have HP 7975 now with XP.I have the following drives installed:
Philips CDD 4851 combo CD and CDRW
HP 300i DVD comb drive

I also have the following drive that is not installed:
Pioneer DVD Rom that came on my computer about 2 years ago. I removed it when I installed the HP 300i.

Question:
Would I be better off to remove the 2 drives from my computer and replace them with the Pioneer DVD Rom and a NEC 2500A DVD comb which I also own.

I have read that it would be better to have a DVD rom to read from and a DVD writer to write to instead of useing the combo reader/writer for both reading and writing.

Also if I swap them out do I put the jumpers on the replacement drives in the same location as the ones I remove?

My computer is working fine now so no problem with present drives.

Thanks for all of your answers.

[ + quote]
HP 7975 Pentium 4W/2.0 XP Home
1 GB RAM
Maxtor 80 GB and WD 80 GB (used for movies only)
Pioneer 116 DVD ROM,and BenQ 1640 Combo
Advertisement
_ 		__
colw
Senior Member
_ 		26. May 2004 @ 00:55 _ Link to this message    Send private message to this user   
I tend to work on the principle - if it ain't broke don't fix it.

Others may be more adventurous
[ + quote]
TMcCallie
Member
_ 		26. May 2004 @ 01:12 _ Link to this message    Send private message to this user   
colw.....

No it ain't broke, I just want to swap out a CD combo drive that is in my system now for a DVD Rom drive that I have in stock and replace a HP 300 with a NEC 2500A.

I don't understand the thing about slave and master and cable when it comes to jumpers.


Does it make any difference when a DVD Rom drive and a DVD Burner are on the same ribbon cable which one is the master and which one is the slave?

Will you explain that to me in my easy to understand terms.

Thanks


[ + quote]
HP 7975 Pentium 4W/2.0 XP Home
1 GB RAM
Maxtor 80 GB and WD 80 GB (used for movies only)
Pioneer 116 DVD ROM,and BenQ 1640 Combo
colw
Senior Member
_ 		26. May 2004 @ 02:51 _ Link to this message    Send private message to this user   
Sorry - just being a bit flippant

I have my burner set as slave and DVD Rom set as master - I have had not problems with this combination and achieve good rip/burn speeds on a fairly low spectrum system. Many of the more senior members tend to advise otherwise re the master/slave relationship and I will leave it to them to provide more expert advice.

[ + quote]
Nephilim
Moderator
_ 		26. May 2004 @ 06:35 _ Link to this message    Send private message to this user   
I would definitely swap out the existing drives.

The burner is best set to master with the ROM being slave. You are on the right track with using the ROM to rip - faster rips and less wear and tear on your burner.

The way to set them up would be to have the burner on the end of the IDE cable and the ROM plugged into the middle connection. If you look at the back of the drive there will be a set of pins with a little jumper connecting two of the pins. Most drives have a sticker or something stamped into the body indicating where the jumper goes to set the drive to either Master, Slave or Cable Select.

It makes no difference if both drives are on the same cable unless you want to do "on-the-fly" copies which isn't advisable anyway :)
[ + quote]


My killer sig came courtesy of bb "El Jefe" mayo.
The Forum Rules You Agreed To! http://forums.afterdawn.com/thread_view.cfm/2487
"And there we saw the giants, and we were in our own sight as grasshoppers, and so we were in their sight" - Numbers 13:33

This message has been edited since posting. Last time this message was edited on 26. May 2004 @ 06:37
TMcCallie
Member
_ 		26. May 2004 @ 21:36 _ Link to this message    Send private message to this user   
Anyone please.

I have switched my drives. I now have a DVD Rom Drive Phillips 116 and DVD Burner Nec 2500A.

They work fine on my computer.
Now for the problem:

Nero does not recognize this DVD Rom drive. It recognizes the NEC 2500A but not the Phillips DVD Rom.

I did not have the DVD Rom when I installed Nero Ultra 6. Could that be the reason.

Please advise how I can get it to recognize my DVD Rom reader.

Thanks,
Tom
[ + quote]
HP 7975 Pentium 4W/2.0 XP Home
1 GB RAM
Maxtor 80 GB and WD 80 GB (used for movies only)
Pioneer 116 DVD ROM,and BenQ 1640 Combo
TMcCallie
Member
_ 		26. May 2004 @ 21:39 _ Link to this message    Send private message to this user   
Forgot to say on my recent posting:

The DVD Rom drive is recognized by DVDinfoPro.
So it must be installed correctly, Nero just don't see it.
[ + quote]
HP 7975 Pentium 4W/2.0 XP Home
1 GB RAM
Maxtor 80 GB and WD 80 GB (used for movies only)
Pioneer 116 DVD ROM,and BenQ 1640 Combo
TMcCallie
Member
_ 		26. May 2004 @ 22:18 _ Link to this message    Send private message to this user   
I have determined that it is finding it but it is finding it as a wrong drive letter. It is assigning it the drive letter.

My computer shows the correct drive letter for my Rom Drive but Nero shows it as Drive D instead of Drive E.


[ + quote]
HP 7975 Pentium 4W/2.0 XP Home
1 GB RAM
Maxtor 80 GB and WD 80 GB (used for movies only)
Pioneer 116 DVD ROM,and BenQ 1640 Combo
Jerry746
AfterDawn Addict
_ 		27. May 2004 @ 05:59 _ Link to this message    Send private message to this user   
I would try a Nero re-install since Windows is seeing it.

Jerry
[ + quote]
TMcCallie
Member
_ 		27. May 2004 @ 08:51 _ Link to this message    Send private message to this user   
Thanks, I deleted Nero and reinstalled it and now it is fine.

Thanks,
Tom

Love this forum
[ + quote]
HP 7975 Pentium 4W/2.0 XP Home
1 GB RAM
Maxtor 80 GB and WD 80 GB (used for movies only)
Pioneer 116 DVD ROM,and BenQ 1640 Combo
Advertisement
_ 		__
 
_
Jerry746
AfterDawn Addict
_ 		27. May 2004 @ 17:39 _ Link to this message    Send private message to this user   
Glad that worked for you. This is definitely a great place to hang out. We never seem to stop learning all the tricks.

Jerry
[ + quote]
afterdawn.com > forums > pc hardware > dvd / blu-ray drives > which drives to install on my computer
 

Digital video: AfterDawn.com | AfterDawn Forums
Music: MP3Lizard.com
Gaming: Blasteroids.com | Blasteroids Forums | Compare game prices
Software: Software downloads
Blogs: User profile pages
RSS feeds: AfterDawn.com News | Software updates | AfterDawn Forums
International: AfterDawn in Finnish | AfterDawn in Swedish | AfterDawn in Norwegian | download.fi
Navigate: Search | Site map
About us: About AfterDawn Ltd | Advertise on our sites | Rules, Restrictions, Legal disclaimer & Privacy policy
Contact us: Send feedback | Contact our media sales team
 
  © 1999-2026 by AfterDawn Ltd.

  IDG TechNetwork