|
|
|
Session fixation error, could not perform end of disc at once
|
|
|
itsmeek
Newbie
|
19. July 2004 @ 17:58 |
Link to this message
|
|
Hi all, Please assist
I am using an LDW-811s. I have 1 gig of pc3200 on a p4 2.4 w/ 800mhz fsb, below is the burning log. I am trying to back up my dvd-s on ritek gold dvd-r's. Thank you in advance:
WAMIQUE
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:Program FilesAheadNeroWnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM
Nero version: 6.3.1.17
Recorder: <LITE-ON DVDRW LDW-811S> Version: HS0Q - HA 1 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <Generic DVD-ROM >Version: 1.0 - HA 2 TA 0 - 6.3.1.17
Adapter driver: <d346prt> HA 2
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y160P0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD1600BB-00DAA0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : LITE-ON DVDRW LDW-811S atapi Port 1 ID 0 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d346prt Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
LITE-ON DVDRW LDW-811S K: CDRom0
Generic DVD-ROM L: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1047548kB)
Free physical memory: 643MB (658664kB)
Memory in use : 37 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
19.7.2004
Burn DVD Image
8:48:56 PM #1 Text 0 File Reader.cpp, Line 118
Reader running
8:48:56 PM #2 Text 0 File Writer.cpp, Line 124
Writer LITE-ON DVDRW LDW-811S running
8:48:56 PM #3 Text 0 File Burncd.cpp, Line 3172
Turn on Disc-at-once, using DVD media
8:48:57 PM #4 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2266703 (503:42.53, 4427MB)
8:48:57 PM #5 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO (enabled: CD)
8:48:57 PM #6 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: LITE-ON DVDRW LDW-811S, Media type: DVD-R
Disc Manufacturer: RITEKG - 04
Disc Application Code: 64, Disc Physical Code: 193
8:48:57 PM #7 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================
8:48:57 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2266704 (2266704) = #2266704/503:42.54
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2266704 blocks [LITE-ON DVDRW LDW-811S ]
--------------------------------------------------------------
8:48:57 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [LITE-ON DVDRW LDW-811S ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4642209792, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2266704 | lead-out | 1 | 0x00 | 0x41
8:48:57 PM #10 Phase 24 File dlgbrnst.cpp, Line 1845
Caching of files started
8:48:57 PM #11 Text 0 File Burncd.cpp, Line 4182
Cache writing successful.
8:48:57 PM #12 Phase 25 File dlgbrnst.cpp, Line 1845
Caching of files completed
8:48:57 PM #13 Phase 28 File dlgbrnst.cpp, Line 1845
Speed measurement started
8:48:57 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
8:50:45 PM #15 Text 0 File WriterStatus.cpp, Line 115
<LITE-ON DVDRW LDW-811S > start writing Lead-Out at LBA 2266704 (229650h), lenght 0 blocks
8:50:45 PM #16 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
8:50:45 PM #17 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
8:50:45 PM #18 Phase 29 File dlgbrnst.cpp, Line 1796
Speed measurement completed: 30.9x (42,672 KB/s)
8:50:45 PM #19 Phase 36 File dlgbrnst.cpp, Line 1845
Burn process started at 4x (5,540 KB/s)
8:50:45 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
8:50:45 PM #21 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 14:03,267 (843267ms) -> OK
8:50:45 PM #22 Text 0 File DVDR.cpp, Line 1879
Recording mode: Sequential Recording Mode
8:50:45 PM #23 Text 0 File Mmc.cpp, Line 20401
Set BUFE: supported -> ON , SMART-BURN : ON
8:50:45 PM #24 Text 0 File DVDR.cpp, Line 2020
Start write address at LBA 0
DVD high compatibility mode: Yes
8:50:45 PM #25 Text 0 File Cdrdrv.cpp, Line 8128
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
8:50:45 PM #26 Text 0 File DVDR.cpp, Line 4645
Drive: LITE-ON DVDRW LDW-811S
Book Type request: DVD-ROM
Changing the book type was finish with error code: 0
8:50:52 PM #27 Text 0 File Cdrdrv.cpp, Line 1294
20:50:52.156 - LITE-ON DVDRW LDW-811SH1 T0 : Queue again later
9:05:19 PM #28 Text 0 File WriterStatus.cpp, Line 115
<LITE-ON DVDRW LDW-811S > start writing Lead-Out at LBA 2266704 (229650h), lenght 0 blocks
9:05:19 PM #29 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
9:05:19 PM #30 Text 0 File DVDR.cpp, Line 2256
EndDAO: Last written address was 2266703
9:05:51 PM #31 SCSI -1176 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x02
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x72 0x02
9:05:51 PM #32 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
9:05:51 PM #33 CDR -1176 File ThreadedTransferInterface.cpp, Line 1708
Session fixation error
9:05:51 PM #34 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1708
Could not perform end of Disc-at-once
9:05:51 PM #35 Text 0 File DVDR.cpp, Line 2256
EndDAO: Last written address was -1
9:05:51 PM #36 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
9:05:51 PM #37 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
9:05:51 PM #38 Phase 38 File dlgbrnst.cpp, Line 1845
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'DriversPXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 10/28/2003 6:02:00 AM (Prassi/Veritas driver for win 2K)
File 'Driversatapi.sys': Ver=?.?.?.?, size=86912 bytes, created 8/29/2002 4:27:50 AM (Adapter driver for rec)
File 'Driversd346prt.sys': Ver=3.46.0.0 built by: WinDDK, size=5248 bytes, created 3/12/2004 10:41:42 PM (Adapter driver for src)
Registry Keys:
HKLMSoftwareMicrosoftWindows NTCurrentVersionWinLogonAllocateCDROMs : 0 (Security Option)
This message has been edited since posting. Last time this message was edited on 21. July 2004 @ 06:14
|
|
Advertisement
|
|
|
|
AfterDawn Addict
|
20. July 2004 @ 20:11 |
Link to this message
|
|
Well first off, edit your post and remove your Nero registration number.
This is a bit different. I have never seen these lines in a Nero log:
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
and:
Book Type request: DVD-ROM
Changing the book type was finish with error code: 0
Might be a good idea to check your settings. Now I don't normally burn disc images so I am not exactly sure what the settings should be.
Just curious, how are your drives connected?
CdRomPeripheral : LITE-ON DVDRW LDW-811S atapi Port 1 ID 0 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d346prt Port 2 ID 0 DMA: Off
This message has been edited since posting. Last time this message was edited on 20. July 2004 @ 20:13
|
|
itsmeek
Newbie
|
21. July 2004 @ 06:14 |
Link to this message
|
|
hi,
thank you for pointing the registration number out to me. i was not really thinking straight from frustration.
this happens anytime i try to burn a dvd w/a ritek gold disk (aren't these supposed to be the best?). this problem isn't exclusive to .img files, it happens w/any dvd I try to backup.
my setup is as following:
primary master= 160gb hd
primary slave= 160gb hd
secondary master= dvd burner
the other cd rom drive is a virtual drive w/daemon tools. in other words, it doesn't really exist physically.
thank you for your reply.
|
AfterDawn Addict
|
21. July 2004 @ 07:40 |
Link to this message
|
I've had Nero 6 for quite some time and have had various odd failures with it, generally caused by me moving things around in explorer, adding or removing disc drives or just not selecting the correct set up.
If it looks like the program was set correctly, then just remove and reinstall the program. Do a complete removal and reboot. Then download a fresh .exe from Nero. This works most of the time. You can also use these Nero utilitys:
http://www.nero.com/us/631938356417810.html
I have great success with the Ritek G-04 discs, however it is always possible to get a bad batch, I suppose. Your log file didn't really give an indication of bad media though. You can always try something different. Testing and troubleshooting with a DVD RW will keep you from making coasters as well.
I forgot to ask, but have you ever burned successfully?
Try burning a VIDEO_TS folder instead of an .img file just so we can see how that compares to mine. If you don't mind. Preferably after a reinstallation of Nero.
This message has been edited since posting. Last time this message was edited on 22. July 2004 @ 09:59
|
|
itsmeek
Newbie
|
21. July 2004 @ 12:13 |
Link to this message
|
hi frank,
thanks for your ongoing effort.
in answer to your question: yes, i have burned successfully before, but w/other media, never w/this ritek media. i have tried both video ts and .img and have no success w/the ritek media. weird, maybe i'll go back to the older version of Nero. i have already tried the total removal and fresh reinstall of Nero to no avail.
thank you,
|
|
rick5446
Suspended due to non-functional email address
|
21. July 2004 @ 13:45 |
Link to this message
|
|
A recent problem just jumped up on me! Hope u got the answer for me.This only happens W/DVDSHRINK on my NEC DVD_RW ND 1300A
It does not ruin the disc,as I can put it in my Plextor & it will burn fine.Also W/DVDshrink & Plextor will burn A-OK
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM
Nero API version: 6.3.1.17
Using interface version: 6.0.0.0
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <_NEC DVD_RW ND-1300A> Version: 1.05 - HA 1 TA 1 - 6.3.1.17
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1200AB-00DBA0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD1600JB-00DUA0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : JLMS XJ-HD166S atapi Port 1 ID 0 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-1300A atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
JLMS XJ-HD166S E: CDRom0
_NEC DVD_RW ND-1300A F: CDRom1
PLEXTOR DVDR PX-708A G: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 70254592 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 479MB (490992kB)
Free physical memory: 164MB (168696kB)
Memory in use : 65 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
21.7.2004
NeroAPI
5:36:05 PM #1 Phase 111 File APIProgress.cpp, Line 273
DVD-Video files sorted
5:36:05 PM #2 Text 0 File Reader.cpp, Line 118
Reader running
5:36:05 PM #3 Text 0 File Writer.cpp, Line 124
Writer _NEC DVD_RW ND-1300A running
5:36:05 PM #4 Text 0 File AudioCompilationImpl.cpp, Line 817
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
5:36:05 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
5:36:05 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
5:36:05 PM #7 Text 0 File Burncd.cpp, Line 3172
Turn on Disc-At-Once, using DVD media
5:36:05 PM #8 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2109823 (468:50.73, 4120MB)
5:36:05 PM #9 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO
5:36:05 PM #10 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: _NEC DVD_RW ND-1300A, Media type: DVD-R
Disc Manufacturer: RITEKG - 04
Disc Application Code: 64, Disc Physical Code: 193
5:36:05 PM #11 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================
5:36:05 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2109824 (2109824) = #2109824/468:50.74
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2109824 blocks [_NEC DVD_RW ND-1300A ]
--------------------------------------------------------------
5:36:05 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [_NEC DVD_RW ND-1300A ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4320919552, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2109824 | lead-out | 1 | 0x00 | 0x41
5:36:05 PM #14 Phase 24 File APIProgress.cpp, Line 273
Caching of files started
5:36:05 PM #15 Text 0 File Burncd.cpp, Line 4182
Cache writing successful.
5:36:05 PM #16 Phase 25 File APIProgress.cpp, Line 273
Caching of files completed
5:36:05 PM #17 Phase 36 File APIProgress.cpp, Line 273
Burn process started at 4x (5,540 KB/s)
5:36:06 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
5:36:06 PM #19 Text 0 File DVDR.cpp, Line 1879
Recording mode: Sequential Recording Mode
5:36:06 PM #20 Text 0 File Mmc.cpp, Line 20401
Set BUFE: supported -> ON
5:36:06 PM #21 Text 0 File DVDR.cpp, Line 2020
Start write address at LBA 0
DVD high compatibility mode: Yes
5:36:06 PM #22 Text 0 File Cdrdrv.cpp, Line 8128
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
5:36:30 PM #23 SCSI -1106 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x02FA0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x03
5:36:30 PM #24 CDR -1106 File Writer.cpp, Line 304
Power calibration error
5:36:30 PM #25 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
5:36:30 PM #26 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
5:36:30 PM #27 Text 0 File DVDR.cpp, Line 2256
EndDAO: Last written address was -1
5:36:30 PM #28 Phase 38 File APIProgress.cpp, Line 273
Burn process failed at 4x (5,540 KB/s)
5:36:30 PM #29 Text 0 File AudioCompilationImpl.cpp, Line 828
DRM: DRM burn session terminated.
5:36:30 PM #30 Text 0 File AudioCompilationImpl.cpp, Line 857
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 6/8/2004 11:56:11 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
This message has been edited since posting. Last time this message was edited on 22. July 2004 @ 11:00
|
|
bluto1940
Suspended due to non-functional email address
|
22. July 2004 @ 02:14 |
Link to this message
|
|
Rick5546
You should edit out your serial numbers for Nero
|
AfterDawn Addict
|
22. July 2004 @ 09:59 |
Link to this message
|
Wow three serial numbers!
Gotta give me a while to go through these logs....I think I'm going blind. BTW, It is always great to try and help folks out here at AD but Nero has customer support too. You paid for the program and the support comes with the price, so why not try it? They made the program so they ought to know how to fix it.
They won't release a guide explaining what all the stuff in the log files mean. They have a very basic guide at their website thats about useless.
Anyhow, let me look at it...
|
AfterDawn Addict
|
22. July 2004 @ 12:06 |
Link to this message
|
rick,
That's a Nero burn log, Shrink is using Nero to burn your disc.
Well if your Plexor is working and the NEC is not I'd say you need to do a firmware upgrade. I checked a bit and find that your current firmware (1.05) is a bit old...I think. Hopefully a 1300 user will see this and tell me if this is correct.
BTW rick, and anyone else that reads this:
PMs shouldn't be used for questions that can be answered on the forums. Even if I say something stupid or you disagree, its OK to say it here. As long as it pertains to the subject of the thread then this is where it belongs.
The reason for this rule is to keep folks like myself from getting 300 e mails a day. Besides, you sure want other folks input as well as I do. Its not like I don't make mistaks and chances are if its out in view, someone will catch it.
itsmeek,
Before you give up, try those utilitys. I fixed the link so it should work. Try doing a simulated burn and see if it still fails.
|
|
rick5446
Suspended due to non-functional email address
|
22. July 2004 @ 15:07 |
Link to this message
|
|
Hey!fasfrank
What links are u talking about? &
Thanks I'll try a simulated burn & see
What's funny is it worked at 7:00 But not at 8:00
Thanks for your reply though,been useing the the same 105 since I bought the computer in Nov of last year
Don't have any idea where to get updated drivers for NEC
|
|
itsmeek
Newbie
|
22. July 2004 @ 18:03 |
Link to this message
|
hi frank
after trying all you suggested, i was curious about going back to Nero 5.5. i did so, and voila!! perfect burns everytime. thanks alot for your assistance :)
|
AfterDawn Addict
|
22. July 2004 @ 18:54 |
Link to this message
|
Hi itsmeek,
Well I suppose thats one way to fix it. To me, it's like having something wrong with your car so you replace the car. Pretty much takes care of the problem without fixing the original issue.
Rick,
Are you still getting this:
5:36:30 PM #24 CDR -1106 File Writer.cpp, Line 304
Power calibration error
Heres an exerpt from Nero concerning Power Calbration Problems:
23. I get a power calibration error. What does this mean and how can I fix it?
Power Calibration is controlled by the recorder. Before any write operation, all recorders must do a 15 step power test to determine the optimum power for writing to the CD; this is called "Optimum Power Calibration"(OPC). And during the write, it continues to do this test to get the best write throughout the whole CD; this is called "Running Optimum Power Calibration" (ROPC). This whole process is controlled by the recorder, though initiated by programs such as Nero. There is an area on the inner part of the CD for the test and test data info to be stored. You can use this area up to 999 times.
So, when you receive the "Power Calibration Error" or "Power Calibration Area full" error message, then the cause will be either poor media, poor Power, or a defective Recorder.
POSSIBLE SOLUTIONS:
1) A might enable the OPC on this medium
2) Try another brand of CDR or CDRW media.
3) Also try different power connectors, and for recorders, do not share power with other devices. It needs its own power connector. If this occurs with an External recorder, the power source in the chassis could be the cause. Take the recorder out of the external chassis, and connect it internal, as a test.
4) Try different configurations, such as taking the CDROM to the Primary IDE bus as Slave, and have only the recorder connected to the Secondary IDE bus as Master.
5) Send the recorder in for Service.
top
(I have no idea what #1 means)
Another thing to do is clean your drive. You can buy cleaning kits at electronics and computer stores.
|
|
itsmeek
Newbie
|
22. July 2004 @ 18:55 |
Link to this message
|
|
agreed. however I tried everything I knew to try to no avail. i am getting married in 2 weeks so i don't really have time for something like this if the easy fix was using an older version :)
|
AfterDawn Addict
|
22. July 2004 @ 20:17 |
Link to this message
|
Absolutely nothing wrong with that, I'm just sorry I could not help you get Nero 6 working.
BTW congratulations, I wish the two of you the best!
Cheers,
Frank
|
|
renoron
Newbie
|
28. July 2004 @ 12:35 |
Link to this message
|
Fasfrank wrote:
Quote:
It is always great to try and help folks out here at AD but Nero has customer support too. You paid for the program and the support comes with the price, so why not try it? They made the program so they ought to know how to fix it.
Frank,
I'm here looking around precisely because I can't get decent support from Nero. About two weeks ago, I bought an upgrade from 5.5 to Nero6. I'm unable to burn a DVD above 2.4x, and tried to get help from Nero. It takes four days turnaround each time I write to Nero support to get an answer back. Their two suggestions so far have failed. I finally gave them an ultimatum to either provide reasonably timely support, or I'd dispute the charge for the upgrade with my card company. After another 4 days without an answer, I disputed the charge, the card company reversed it tentatively, and I went back to my registered copy of Nero 5.5. Unfortunately, I'm still having problems getting 5.5 to write above 2.4x on Ritek G0-4 disks, too.
Nero support is pretty sucky right now, and I for one can't wait for what has already taken two weeks just to receive three emails from them throughout our exchange.
|
|
Riku65
Newbie
|
19. August 2004 @ 05:54 |
Link to this message
|
|
Hi
I have this Close out error to on RiDisc, Ritek Dye DVD-R 4x they used to work fine then seems this new batch fails everytime different media works fine LITEON sent me a disk DVD-R with my burner thats fine burnt a dream and I had a datawrite or datasafe +RW which also burnt fine.
Really strange
Riku
Riku
|
|
Advertisement
|
|
|
|
renoron
Newbie
|
19. August 2004 @ 09:37 |
Link to this message
|
|
Thanks. I've not read about any problems with these disks. I've had the same problem with the four "Newegg" branded disks that came with the burner, although they look like they could be Ritek blanks, too. I'll try something else.
|
|
