|
Dbox In Ireland
|
|
|
rua11
Junior Member
|
13. April 2008 @ 16:07 |
Link to this message
|
|
Yes Ch*rus please! lots on a couple threads for N*L areas but the country cousins could do with a bit of a dig out :-)
|
|
Advertisement
|
 |
|
|
|
jock54
Junior Member
|
13. April 2008 @ 16:08 |
Link to this message
|
|
Message for fla11 or anyone else interested regarding chipping a card, pm me and i will reply ..
|
|
Obsy
Newbie
|
13. April 2008 @ 16:13 |
Link to this message
|
Hi peeps,
I really really hope someone can help me here, I have a NTL sagem sportsters Pro DBox and it have been off since last week 2 days after I bought the box, I like in the Uk.
I asked the guy to fix it that I bought it from and he wants to charge me for everytime this happens so I thought I would try it out myself.
I followed these instructions......
To get started follow instructions below:
1
. Press the blue button and you will be in the features menu, scroll to Tuxbox Commander, press OK.
You should now be looking at the files on the D Box.
2
. Scroll to VAR and press ok, If you don?t see VAR, scroll to <DIR> & press ok, if you still don?t see VAR scroll to the next <DIR> and press ok, keep doing this until VAR appears on the screen!
3
. When you find the VAR file and you press OK, scroll to Keys & press OK
4
. Scroll to Keylist.txt and press 4 on your remote control! It is important that you don?t press OK when you scroll to keylist.txt , you must press 4 in order to edit the code that will appear! If you pressed OK in error , just press the Home button and start again.
5.
After pressing 4 you should be looking at a screen with /var/keys/keylist.txt at the top, 4 or 5 codes in the middle and numbers 1 to 9 at the bottom.
6.
Now you need to scroll to the code that you are going to change, e.g old code is as follows:
N S401 00 587436A3B220CB46 and we need to change it to N S401 00 587436A3B230CB46
We are only changing one digit this time, in future you may have to change more digits.
And I got stuck here as there is no codes like that on the screen??
Can anyone pls help me, I also thought about just tryong to enter the code but I could not figure out how to do that either, I am really hoping one of you can help as I have the kids all holidays and the cartoon channels is what they watch.
|
|
rua11
Junior Member
|
13. April 2008 @ 16:22 |
Link to this message
|
|
I had the same blank screen but it was because I did not pay attention to step 4.(i.e. I had clicked on Keylist.txt which brought up a window with no codes)That's all I can add to your situation as I'm a newbie too....
|
|
rua11
Junior Member
|
13. April 2008 @ 16:25 |
Link to this message
|
|
I had the same blank screen but it was because I did not pay attention to step 4.(i.e. I had clicked on Keylist.txt which brought up a window with no codes)That's all I can add to your situation as I'm a newbie too....
|
|
Obsy
Newbie
|
13. April 2008 @ 16:25 |
Link to this message
|
No I did press 4, then came up a box with 13 different codes but what I am asking is how do you change the code, I am in the bit and can move no further and the
Quote:
6.
Now you need to scroll to the code that you are going to change, e.g old code is as follows:
N S401 00 587436A3B220CB46 and we need to change it to N S401 00 587436A3B230CB46
Aren't on the TV :(
|
|
rua11
Junior Member
|
13. April 2008 @ 16:29 |
Link to this message
|
|
arrow down to highlight an entire line of code and click OK to edit. scroll across to the digit you want to edit and do so using up/down arrows. then exit
|
|
Obsy
Newbie
|
13. April 2008 @ 16:37 |
Link to this message
|
|
Do I have to save the new code before I exit and if so how do I do this?
Thank you all ever so much BTW
|
|
kevinly
Newbie
|
13. April 2008 @ 16:53 |
Link to this message
|
|
Cho4us
13th April
Provider 5e 01
Key 00 - f8 9d f9 95 89 05 86 ae
Key 01 - 12 98 91 94 d9 d5 c3 09
Orginally posted by Kaner on another thread
|
|
jock54
Junior Member
|
13. April 2008 @ 16:54 |
Link to this message
|
|
Latest codes for N?L Dublin.
00:A9 86 6F EA 39 EA 09 49
01:9E 40 85 78 E7 82 10 06.
Latest codes for down the country.
00:F8 9D F9 95 89 05 86 AE
01:12 98 91 94 D9 D5 C3 09
|
|
mgb17
Senior Member
|
13. April 2008 @ 16:58 |
Link to this message
|
Originally posted by Obsy:
Do I have to save the new code before I exit and if so how do I do this?
Thank you all ever so much BTW
Simply upload the new nagrarom7.bin to var/keys via ftp, reboot the dbox and auto update is working again. After that you can forget tuxbox commander.
This message has been edited since posting. Last time this message was edited on 13. April 2008 @ 16:59
|
|
Obsy
Newbie
|
13. April 2008 @ 17:28 |
Link to this message
|
|
I had to do it through the Tuxbox commandor as I don't know how to work the PC.
Any way I got it working you guys honestly are the best THANKYOU!!!!
I hope they keep the codes like this for a bit and if they do change them I hope to find them here.
Thank you again.
|
|
ruprect
Senior Member
|
13. April 2008 @ 17:29 |
Link to this message
|
Originally posted by jock54:
Latest codes for N?L Dublin.
00:A9 86 6F EA 39 EA 09 49
01:9E 40 85 78 E7 82 10 06.
Latest codes for down the country.
00:F8 9D F9 95 89 05 86 AE
01:12 98 91 94 D9 D5 C3 09
Dublin ones are wrong
N 5401 01 1D89F38CC4DC03CB ;ROM7
N 5401 00 9EBA8FBCFCBC8A88 ;ROM7
are correct. There were 2 changes
|
|
jock54
Junior Member
|
13. April 2008 @ 17:39 |
Link to this message
|
|
Sorry about that didn't realise they had changed again in dublin I can only be sure of the ones down the country as thats where i live.
|
Senior Member
|
13. April 2008 @ 17:40 |
Link to this message
|
Originally posted by ruprect:
Originally posted by jock54:
Latest codes for N?L Dublin.
00:A9 86 6F EA 39 EA 09 49
01:9E 40 85 78 E7 82 10 06.
Latest codes for down the country.
00:F8 9D F9 95 89 05 86 AE
01:12 98 91 94 D9 D5 C3 09
Dublin ones are wrong
N 5401 01 1D89F38CC4DC03CB ;ROM7
N 5401 00 9EBA8FBCFCBC8A88 ;ROM7
are correct. There were 2 changes
Confirmation Rupert is correct dublin codes are wrong you posted
|
|
ruprect
Senior Member
|
13. April 2008 @ 17:49 |
Link to this message
|
|
If you are still manually updating then this may help a little.
When the keys roll go in and delete keylist.txt. Turn on to a FTA and back to a pay station. Now a new keylist.txt is created. Go in and edit it. Turn 00 and 01 at the start of the codes to 10 and 11.
Reboot and you get 2 more codes. change these to 20 and 21. Now reboot again. Now you have another 00 and 01.
Now with all these codes infront of you it is easy to determine the correct code. 1 digit should be wrong in 3 lines. You can even figure it out from 2 lines of codes.
I am not sure if this will work on all images/settings. some might delete the 11 10 codes. But it saves you having to write anything down. I had new codes in 5min doing this yesterday.
|
|
deckymck
Suspended due to non-functional email address
|
13. April 2008 @ 18:07 |
Link to this message
|
Originally posted by oggnogg:
You have to post 6 times in there and wait to download it if anyone whats the new fixed files its in my oggnogg link below
After unraring the file, it needs to go into your images keys directory of course, this might be var/keys in most images, and you will need to ftp into the box to do it.
Looking for the fix for dbox, followed your link and checked in the dbox section, but cant seem to find the link.
Has anyone got a link to the fix, think it is nagrarom7.bin
|
Senior Member
|
13. April 2008 @ 18:12 |
Link to this message
|
Originally posted by deckymck:
Originally posted by oggnogg:
You have to post 6 times in there and wait to download it if anyone whats the new fixed files its in my oggnogg link below
After unraring the file, it needs to go into your images keys directory of course, this might be var/keys in most images, and you will need to ftp into the box to do it.
Looking for the fix for dbox, followed your link and checked in the dbox section, but cant seem to find the link.
Has anyone got a link to the fix, think it is nagrarom7.bin
Were you on the piss looking for it :P
http://www.4shared.com/dir/4162681/bd142632/sharing.html
|
|
deckymck
Suspended due to non-functional email address
|
13. April 2008 @ 18:20 |
Link to this message
|
Originally posted by oggnogg:
Originally posted by deckymck:
Originally posted by oggnogg:
You have to post 6 times in there and wait to download it if anyone whats the new fixed files its in my oggnogg link below
After unraring the file, it needs to go into your images keys directory of course, this might be var/keys in most images, and you will need to ftp into the box to do it.
Looking for the fix for dbox, followed your link and checked in the dbox section, but cant seem to find the link.
Has anyone got a link to the fix, think it is nagrarom7.bin
Were you on the piss looking for it :P
http://www.4shared.com/dir/4162681/bd142632/sharing.html
Sorry mate, just found it. DOH!
|
Senior Member
|
13. April 2008 @ 18:25 |
Link to this message
|
Originally posted by deckymck:
Originally posted by oggnogg:
Originally posted by deckymck:
Originally posted by oggnogg:
You have to post 6 times in there and wait to download it if anyone whats the new fixed files its in my oggnogg link below
After unraring the file, it needs to go into your images keys directory of course, this might be var/keys in most images, and you will need to ftp into the box to do it.
Looking for the fix for dbox, followed your link and checked in the dbox section, but cant seem to find the link.
Has anyone got a link to the fix, think it is nagrarom7.bin
Were you on the piss looking for it :P
http://www.4shared.com/dir/4162681/bd142632/sharing.html
Sorry mate, just found it. DOH!
No poblem mate just never mix up Education with Intellance :D ya need any more help drop a post
|
|
Aidanq
Junior Member
|
13. April 2008 @ 19:14 |
Link to this message
|
|
Can anybody confirm the codes for N*L Northern Ireland? Havin no luck at the mo all that im getting is FTA.
|
|
gerryo
Newbie
|
13. April 2008 @ 20:04 |
Link to this message
|
Originally posted by ruprect:
Originally posted by gerryo:
Firstly many thanks to everyone, I've been following the forum for the last couple of days and found it very informative. However, I've been following the instructions on here and trying to update my codes through my remote and although I've followed all of the steps correctly, when I get to the var/keys file its just a blank page with no codes in there at all.
I'm in North Dublin by the way and someone posted earlier that you had to have your box set to the RTE1 channel but I've tried that and it didn't work. I've also tried it on one of the unused channels and some of the other channels but I always end up with a blank file.
Can anyone help, its doing my head in!
the file is keylist.txt leave the tv on rte1with coax connected for a good 30mins. The keylist.txt should be updated by that time. Otherwise you have to enter the entire string in.
N 5401 01 1D89F38CC4DC03CB ;ROM7
N 5401 00 9EBA8FBCFCBC8A88 ;ROM7
Thanks a million ruprect, this worked like a dream. As it happened, my code was only one digit out but I re-set it and now I'm up and running again. I definately owe you a pint, or given your username perhaps you would prefer a DVD of Dirty Rotten Scoundels :)
|
Senior Member
|
13. April 2008 @ 20:56 |
Link to this message
|
|
If anyone is in the dublin area and looking to get there box setup pm me
|
|
stu665
Junior Member
|
14. April 2008 @ 10:54 |
Link to this message
|
Just update Sagem Dbox2 with bluepeer v 1.0 already installed with the new nagrarom7.bin file. Used filezilla to ftp file all seems to be in order, will update with any problems.
Massive thanks to all that gave advice and posted very helpful links.
Cheers Guys!!!!!!
|
|
Advertisement
|
|
|
|
moonboy52
Junior Member
|
14. April 2008 @ 11:58 |
Link to this message
|
I resurrected my dbox2 (x2) sagem a couple of days ago. I put the trinity image on it and it picked up all channels but all balck screen so i decided to give the commando image a go. installed it and still the same problem. My question for now is i cannot ftp the box. i use root and dbox2 as username and password but it says:
Command: USER root
Response: 331 Please specify the password.
Command: PASS *****
Response: 530 Login incorrect.
Error: Could not connect to server
Any ideas about where i am going wrong would be greatly appreciated. Awesome thread guys. been reading it for a couple of months now
|
