|
Ask any XBOX question and it shall be answered ! HERE
|
|
|
Keego118
Suspended due to non-functional email address
|
21. August 2009 @ 15:31 |
Link to this message
|
Hi, I am wanting to know if my flashed xbox 360 will be able to go on Xbox live?.i?m not been daft here what I?m about to say is..
I have a 20GB Xbox 360 hard drive that has played unreleased Copied games before, and I?m wanting to know if I format it using the 360 will I be able to play Genuine REAL Games without getting my console bricked or IP banned from xbox live.
I heard that Microsoft scan the Console hard drive by Xbox live for unreleased copied games? will they find a trace of copied games when it has been formatted by the xbox 360?
I WILL BE USING A FLASHED XBOX 360 WITH A FORMATTED HARD DRIVE..WITH REAL 2ND HAND OR BRAND-NEW GAMES? I WILL NOT BE USING COPIED GAMES FOR XBOX LIVE?
WILL THIS WORK?FORMATING THE HARD DRIVE BY THE 360 SO THEY CANT PICK A TRACE OF COPIED GAMES IN THE PAST ON IT AND BAN ME..
NOTE I WILL BE USING REAL GAMES FOR XBOX LIVE ON THIS HARD DRIVE AND PUTTING MY OTHER HARD DRIVE ON FOR PLAYING UNRELEASED GAMES OFFLINE.
Thanks A lot for any replys..this will be my first time on Xbox live. I?m trying to save my Dad buying me another 360 just for genuine games.
|
|
Advertisement
|
  |
|
|
|
JukeboxJ
Newbie
|
21. August 2009 @ 16:45 |
Link to this message
|
Most xbox mod uploaders give you the option to dual boot the system. Usually meaning that if you press the eject button it will boot to the original xbox dashboard or if you press just the power button it will boot into the modded dashboard. As long as you play the games from the original xbox dashboard then you will not get banned.
|
|
vndang
Newbie
|
17. September 2009 @ 10:16 |
Link to this message
|
Hopefully this thread is still active but here goes.
So I recently softmodded my Xbox and put UnleashX with XBMC as an application. It wasn't until yesterday that I got the telephone line in the living room fixed so I could move the modem and router out there.
I plugged the Xbox in and to my surprise it's not as easy as that...
I have a SpeedStream modem from AT&T (IP 192.168.0.1)
(Apparently the DNS recommended is 68.94.156.1 and 68.94.157.1)
I have a Dynex wireless/wired router (IP 192.168.2.1)
I've tried reading a number of tutorials and gotten nowhere. I tried using a DMZ (Demilitarized Zone). I tried a number of static IP addresses for the XBox.
Basically I'm at a point of frustration that I'm begging for someone to just lay it all out for me say this is what goes here and this is what goes here, you need to do this with your modem, do this with your router, reset this, disconnect then reconnect this, etc.
|
Senior Member
|
18. September 2009 @ 06:29 |
Link to this message
|
|
Ok just tell me one thing... are you trying to connect it to live... and do you have a wireless router with you ? ( so you dont need the telephone line )...???
PC = HP DV7 Entertainment Laptop (2008)
Intel Core2Duo @2.26GHz, 3GB DDR3 RAM, Nvidia Ge Force 9600m GT 512MB, Windows 7 Unltimate
Phones = White iPhone 3GS 16GB , Black iPhone 4S 16GB
|
|
john7435
Newbie
|
10. October 2009 @ 12:14 |
Link to this message
|
hey everyone.
i'm waiting to get a part from ebay (the via 6421 SATA card..onboard sata wouldn't work) to flash my BENq. i already spent a bunch of cash on the DL burner and discs and shit and dont want to spend more. it says for wxripper you need a dvd that's over 7.5 gigs...im pretty sure i don't have any.
i've made a dummy file on my desktop of 7.8 gigs. can i burn that to a dvd and then use that in place of the DVD movie? or does it have to be like a real working disc?
thanks in advance
|
|
salman123
Suspended due to non-functional email address
|
5. November 2009 @ 10:20 |
Link to this message
|
please answer my question
i have 360 modded with modchip not flash
its pal version and arcade model
so please tell me how to burn and play games?
can i play live?
i have burn gta liberty stories & tekken 6 with img burn at 2x speed
i have done code layer 1912-- something but when i insert the disc its reading and display open tray
should i update
please help me out
|
Moderator
|
5. November 2009 @ 12:11 |
Link to this message
|
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
|
weedop
Junior Member
|
18. November 2009 @ 02:56 |
Link to this message
|
Ok i saw on here that i could mod with my psp so i got it all runnin, i mean kinda. I connected to the xbox and erased everything went fine next i went to get all the programs Ar and usbview got all that stuff the only thing is is tha when i open AR the AR light blinks green and gives me the error report thing send or dont send. i unplug the psp and AR stays on but as soon as i plug it in it goes down. i really dont have the money to buy a usb because i just lost my job.
|
|
weedop
Junior Member
|
18. November 2009 @ 13:52 |
Link to this message
|
|
|
Moderator
|
18. November 2009 @ 14:00 |
Link to this message
|
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
This message has been edited since posting. Last time this message was edited on 18. November 2009 @ 14:01
|
|
weedop
Junior Member
|
18. November 2009 @ 16:26 |
Link to this message
|
|
|
|
lionrock8
Newbie
|
20. November 2009 @ 08:50 |
Link to this message
|
There's this BS in Hong Kong going about that need 'bootable discs' when you buy copy xbox 360 games
apparently, put game in first and you get the xbox logo
you have to put in the disc first until a 'please insert xbox 360 dvd' pops out
then you put the video game and all is well.
can anyone confirm this? and a link to it if already said
Shake shake shake shake shake it
|
|
qwert99
Senior Member
|
20. November 2009 @ 10:51 |
Link to this message
|
Originally posted by lionrock8:
There's this BS in Hong Kong going about that need 'bootable discs' when you buy copy xbox 360 games
apparently, put game in first and you get the xbox logo
you have to put in the disc first until a 'please insert xbox 360 dvd' pops out
then you put the video game and all is well.
can anyone confirm this? and a link to it if already said
The latest firmware revision for Lite-On to be released was 1.6, which supports games up to wave 3. Many new games are wave 4. In order to play wave 4 games on a Lite-On, you need that activate disc.
If you have a different type of drive you can use 1.61 firmware instead.
$38 on new discs -- Check
$15 on burn after burn that showed as a DVD -- Check
$11 on new laser -- Check
$28 on new multimeter -- Check
___________________________________
Knowledge from Leerage? -- Priceless
|
|
John_Donn
Member
|
22. November 2009 @ 04:06 |
Link to this message
|
so i am having problems with my original xbox finding my ip address, it does sometimes but not always and changing it to static does not work. Is it possible my internet connection is just to bad sometimes? im using xbmc FTP to my computer
|
|
lionrock8
Newbie
|
22. November 2009 @ 09:39 |
Link to this message
|
Originally posted by qwert99:
Originally posted by lionrock8:
There's this BS in Hong Kong going about that need 'bootable discs' when you buy copy xbox 360 games
apparently, put game in first and you get the xbox logo
you have to put in the disc first until a 'please insert xbox 360 dvd' pops out
then you put the video game and all is well.
can anyone confirm this? and a link to it if already said
The latest firmware revision for Lite-On to be released was 1.6, which supports games up to wave 3. Many new games are wave 4. In order to play wave 4 games on a Lite-On, you need that activate disc.
If you have a different type of drive you can use 1.61 firmware instead.
I know that already. I modded it 1.61 and can play the new stuff. I told this to the guy selling (in cantonese which was very difficult) and he still thinks I need the CD?
Shake shake shake shake shake it
|
|
Donavin
Member
|
22. November 2009 @ 11:42 |
Link to this message
|
I need help with my Xbox 360 data migration kit. I recently got one from microsoft just to find out that the disc that I need for the memory swap is deffective. I need to find out what software I need to transfer memory from one harddrive to another. (A link to a download would be great! :) )
|
|
John_Donn
Member
|
22. November 2009 @ 19:57 |
Link to this message
|
Originally posted by Donavin:
I need help with my Xbox 360 data migration kit. I recently got one from microsoft just to find out that the disc that I need for the memory swap is deffective. I need to find out what software I need to transfer memory from one harddrive to another. (A link to a download would be great! :) )
any xbox question your question is not an xbox question,there is one and only one forum for the 360
|
|
MelkorPVP
Newbie
|
25. December 2009 @ 04:39 |
Link to this message
|
I have two softmodded xbox classics. They both use the unleashx dashboard.
For sanity I'll refer to them as BrokenBox and WorkingBox. I have many properly burned xbox games. They all used to work on both BrokenBox and WorkingBox. I have many dvds, retail, burned, and video files on data discs. They all used to work on both as well.
Recently BrokenBox says "Unknown" in the tray when I insert one of these burned games, or one of the non retail dvds. WorkingBox loads the same disc everytime.
BrokenBox will load retail games, I've tried all 17 I own.
BrokenBox will not load non retail DVDs in either DongleFreePlayer, or XBMC.
---
I restored BrokenBox to retail.
I restored WorkingBox to retail.
I remodded both boxes with softmod and then installed the UnleashX dash.
Symptoms remain as above. What is going on with BrokenBox? I cant figure it out.
I love male pubic regions.
This message has been edited since posting. Last time this message was edited on 25. December 2009 @ 04:41
|
Senior Member
3 product reviews
|
25. December 2009 @ 06:44 |
Link to this message
|
Sounds like your dvd pot needs to be adjusted on the laser of the dvd drive. Just for the hell of it switch the dvd drives and try it again. If it loads then you know it's the laser of the one that's not working.
|
|
EpicRave
Inactive
|
28. December 2009 @ 16:39 |
Link to this message
|
Im like, having a serious problem with my xbox. For some reason, my xbox does not recognize any of my xbox disks,even though iv played them before with the same console. Any suggesions? O_o
Oh fudgnuggets!
|
|
dontcare4
Newbie
|
3. January 2010 @ 06:14 |
Link to this message
|
I beg of you 2 things
#1 I screwed up my hard drive, it was formatted by windows vista and now wont work it is 120gb ntfs and
#2How can i turn it to fatx
|
Member
|
4. January 2010 @ 15:45 |
Link to this message
|
Originally posted by EpicRave:
Im like, having a serious problem with my xbox. For some reason, my xbox does not recognize any of my xbox disks,even though iv played them before with the same console. Any suggesions? O_o
Pick up a new dvd drive off ebay. They are very cheap and the original ones go out fast imo, so it's good to have a few laying around. I have several parts for just in case moments, being that parts are so cheap now.
Buy the ticket, take the ride. -H.S.T.
|
|
Zen_Man
Newbie
|
10. January 2010 @ 07:56 |
Link to this message
|
Greetings,
I've recently decided to mod my old Xbox (duh) and would like to use my PsP as my primary means of transfering the files to my Xbox HDD. I've went through all the motions, reformatted my 2 gig card via psp settings, copied the xxxx and yyyy's to the appropriate driver .inf, installed using the device manager but my Action Replay keeps throwing errors!
Everytime I click Action Replay.exe I get an error report message saying the program must close down! I made my own usb connection that works fine (plugged in, normal error, erase of data then recognized by xbox as a memory card). but my action replay software on my PC just won't work.
I WAS running this all on Win 7 but I've researched to find AR isnt compatable with 7 so I used my XP computer and still the same blinking AR logo and the error report... I'm getting frustraited but far from ready to give up.
I don't have any other usb devices except a digital camera with a SD card input that totally won't work so I'd REALLY like to figure this psp thing out.
--Error Signature-- AppName: maxdrive.exe AppVer: 1.0.0.1 ModName: maxdrive.exe ModVer 1.0.0.1 Offset: 00019ecf
I used Maxdrive in this instance but I get the exact same results with Action Replay including the updated versions. If someone has any idea of what I missed PLEASE help me out!
I have everything ready to go I just need AR or MD to not crash! Why does my Xbox read the psp fine yet my PC software won't? It's connected and usbview.exe and device manager tell me the drivers are installed and the device is plugged in AND working... what am I missing???
|
|
zhahad
Newbie
|
10. January 2010 @ 13:12 |
Link to this message
|
|
|
|
Advertisement
|
|
|
|
suijin
Newbie
|
10. January 2010 @ 19:16 |
Link to this message
|
hi guys, im new here, i wanted to know what a solid orange light on my xbox means b/c it still runs games fine and xbmc fine.looking online,it said i had a soldering problem, but i didnt open my xbox so i dont think that the problem.It doesnt overheat because its pretty much in the middle of the room on top of a rack so there is no blockage of airflow..all the cables are fine, can someone tell me how to fix this problem or if its dangerous or if i can live with it..Thanks in advance
|
