|
|
|
nero burning problems
|
|
Moderator
|
2. November 2005 @ 05:08 |
Link to this message
|
|
cool, that equates to 1MB :)
ps from my last reply i said "there may be now NEW firmware out for it" that should read "there may be no NEW firmware out for it"
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
|
Advertisement
|
|
|
|
|
sumaba
Junior Member
|
2. November 2005 @ 19:57 |
Link to this message
|
|
Thank you - I have not had a chance to do anything about it yet today. I just saved another video clip more conventionally and I will try burning it. If that works then maybe it will help all of you that have been helping me to be able to narrow down my problem more. I am not much help since I don't even understand half of what you talk about. But I sure do appreciate the ideas and help.
|
|
sumaba
Junior Member
|
2. November 2005 @ 20:29 |
Link to this message
|
I tried another video clip - that I right clicked on the site for accessing the clip and used "save target as" and saved it on my desktop. But that clip does not play either - it shows as "empty' when I use the "display" key on the remote for my dvd player.
Here is the history if it is any help - Thank you
Oh I have to retry "incd" removal. Last night the site was not available.
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/27/2004 1:35:32 AM
Nero Version: 6.6.0.14
Internal Version: 6, 6, 0, 14d
(Nero Express)
Recorder: <SONY DVD RW DRU-810A> Version: 2.0b - HA 4 TA 0 - 6.6.0.14
Adapter driver: <> HA 4
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <LITE-ON COMBO SOHC-4832K>Version: OTK2 - HA 3 TA 0 - 6.6.0.14
Adapter driver: <atapi> HA 3
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800BB-00JHC0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITE-ON COMBO SOHC-4832K atapi Port 3 ID 0 DMA: On
=== CDRom-Device-Map ===
LITE-ON COMBO SOHC-4832K E: CDRom0
SONY DVD RW DRU-810A G: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 38797312 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 238MB (244464kB)
Free physical memory: 16MB (16936kB)
Memory in use : 93
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
3.11.2005
ISO compilation
3:10:10 PM #1 Text 0 File Isodoc.cpp, Line 6314
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
3:10:10 PM #2 Text 0 File Reader.cpp, Line 127
Reader running
3:10:10 PM #3 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DRU-810A running
3:10:10 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3297
First writeable address = 0 (0x00000000)
3:10:10 PM #5 Text 0 File Burncd.cpp, Line 3230
Turn on Disc-At-Once, using DVD media
3:10:10 PM #6 Text 0 File DlgWaitCD.cpp, Line 267
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 607 ( 0:08.07, 1MB)
3:10:10 PM #7 Text 0 File DlgWaitCD.cpp, Line 279
Write in overburning mode: NO (enabled: CD DVD)
3:10:10 PM #8 Text 0 File DlgWaitCD.cpp, Line 2433
Recorder: SONY DVD RW DRU-810A, Media type: DVD+RW
3:10:10 PM #9 Text 0 File DlgWaitCD.cpp, Line 445
>>> Protocol of DlgWaitCD activities: <<<
=========================================
3:10:10 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 608 (608) = #608/0:8.8
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 608 blocks [SONY DVD RW DRU-810A]
--------------------------------------------------------------
3:10:11 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [SONY DVD RW DRU-810A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1245184, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
608 | lead-out | 1 | 0x41 | 0x00
3:10:13 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
3:10:13 PM #13 Text 0 File Burncd.cpp, Line 4114
Cache writing successful.
3:10:13 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
3:10:13 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)
3:10:13 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
3:10:13 PM #17 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 4, TA 0, LUN 0, buffer 0x039E6800
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x24 0x00
3:10:13 PM #18 Phase 98 File dlgbrnst.cpp, Line 1832
Start formatting disc before burning
3:10:28 PM #19 Phase 100 File dlgbrnst.cpp, Line 1832
Formatting disc was successful
3:10:28 PM #20 Text 0 File DVDPlusRW.cpp, Line 655
Start write address at LBA 0
DVD high compatibility mode: Yes
3:10:28 PM #21 Text 0 File WriterStatus.cpp, Line 116
<SONY DVD RW DRU-810A > start writing Lead-Out at LBA 608 (260h), lenght 0 blocks
3:10:28 PM #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
3:10:29 PM #23 Text 0 File DVDPlusRW.cpp, Line 873
Media-Format will be stopped after burning
3:10:29 PM #24 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders
3:12:18 PM #25 Text 0 File DVDR.cpp, Line 5762
Drive: SONY DVD RW DRU-810A
Book Type request [gen]: DVD-ROM, direct update disc
Changing the Book Type was finished successfully, return code 0
3:12:18 PM #26 CDR -1211 File DVDR.cpp, Line 4929
Book Type set to: DVD-ROM
3:12:18 PM #27 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/18/2001 1:07:32 PM
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 2:59:44 PM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
|
|
sumaba
Junior Member
|
2. November 2005 @ 20:30 |
Link to this message
|
|
I forgot - would using a +dvd versus a - dvd to burn make any difference either?
|
Moderator
|
2. November 2005 @ 21:51 |
Link to this message
|
hi, it's early so i've copied/pasted some replies....
Quote:
Physical memory : 238MB (244464kB)
Free physical memory: 16MB (16936kB)
Memory in use : 93
- With only 256MB to start with you'll have to try real hard to free up more of that memory by closing down as much as you can prior to all dvd work/burning
Quote:
Recorder: SONY DVD RW DRU-810A, Media type: DVD+RW
- the burner's firmware is either out of date, or the firmware's up to date and the media you're using is too new for the firmware to know what to do with (or both!). when the firmware's able to properly recognise media you'd get a 3line paragraph similar to this example
Quote:
Recorder: SONY DVD RW DRU-530A, Media type: DVD-R
Disc Manufacturer: TDKG02 - 000000
Disc Application Code: 64, Disc Physical Code: 193
i guess you're gonna have to try another disc or wait for newer firmware. but also, let's identify that rewritable disc...
download dvd identifier (free) - http://www.afterdawn.com/software/video_software/dvd_tools/dvd_id... and 'identify' that disc and paste results here...
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
sumaba
Junior Member
|
3. November 2005 @ 15:02 |
Link to this message
|
Thank you - I appreciate all the help. I don't really know where to start - too busy to look at it yesterday. I am about ready to call tech support at Nero - but I can only find foreign numbers - is that all there is or am I really off and looking at the wrong site?
I will apply the suggestions - I just am worried about not being able to return the burner if I cannot use it at all - so I am frustrated enough to call support - it is not that I don't want to try the suggestions that i have been given at this site- I just see time going by and might be out a couple hundred dollars, so I worry that I might be faster calling than muddling my way thru it on my own. I wish I was more up to speed on this kind of thing and then the suggestions would click faster.
Thank you - any help is appreciated -
|
|
sumaba
Junior Member
|
3. November 2005 @ 19:27 |
Link to this message
|
|
I have a new but completely related question. Would my Sony dvd burner play both dvd+ and dvd- recordings?
|
|
sumaba
Junior Member
|
3. November 2005 @ 19:52 |
Link to this message
|
|
Not knowing what I am really talking about - it feels strange to be suggesting the problem. But my previous question was leading up to - since my dicsc play on my computer from my burner - could the problem be as simple as my Lasonic dvd player not accepting the burned dvd?
|
|
sumaba
Junior Member
|
3. November 2005 @ 19:53 |
Link to this message
|
|
Not knowing what I am really talking about - it feels strange to be suggesting the problem. But my previous question was leading up to - since my dicsc play on my computer from my burner - could the problem be as simple as my Lasonic dvd player not accepting the burned dvd?
|
Moderator
|
3. November 2005 @ 22:24 |
Link to this message
|
you've not provided the media info i requested....
..calling Nero won't make any difference at this point. we need to establish what media you're using, then figure out why your burner's firmware isn't supporting/recognising it. none of which Nero can help you with at this point..
...let's have the media info pls...
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
sumaba
Junior Member
|
4. November 2005 @ 22:41 |
Link to this message
|
Thank you for all the help. I have not had a chance to really even do justice to the suggestions yet. I hope to this weekend. Too much to do and then too tired to think straight. But to update - I was only burning the site link as I was afraid. Now I am burning the download and have run into a message on my dvd player "codec not supported". Maybe I need to post somewhere else since it is not a Nero problem technically. But I wanted to share the latest after your hard efforts to help me. Thank you again for all the help.
|
|
Laura_e
Junior Member
|
4. November 2005 @ 23:36 |
Link to this message
|
|
"Not knowing what I am really talking about - it feels strange to be suggesting the problem. But my previous question was leading up to - since my dicsc play on my computer from my burner - could the problem be as simple as my Lasonic dvd player not accepting the burned dvd?"
This may well be the case. My standalone dvd player will not read dvd+r and will only read dvd-r (it is an older model)so the burn may be successful and it may just that your dvd player is not capable of recognising the disc. The dvd burner in your computer however should be able to recognise both, so if that isn't recognising the burnt copy then it probably something else such as the discs that you are using.
Best thing to do is to use dvd Identifier if this is the case and post back the findings so the experts can help you out. Just follow their advice and they will get you up and burning, they have proved extremely helful to me on many occassions, and you tend to learn a lot on the way!!
This message has been edited since posting. Last time this message was edited on 4. November 2005 @ 23:37
|
Senior Member
|
5. November 2005 @ 07:50 |
Link to this message
|
If that is the case then you should booktype it to DVD ROM, which is the universal bookytpe and can be read by all players. I'm sure you burner has booktyping capabilities. But you have to have DVD+R to do it, DVD-R can't.
|
|
sumaba
Junior Member
|
5. November 2005 @ 09:13 |
Link to this message
|
|
Thank you Glue Eater - I am sorry but I don't know what any of that is - book type - how do I do this? I have both dvd+ and dvd- , it was dvd + that I used this last time.
|
Senior Member
|
5. November 2005 @ 09:27 |
Link to this message
|
Are you using DVD shrink or what? if so then this is what you have to do.
Aftwe you've done the quick analysis and have chosen all the audio and subtitle streams you will get one last window prompting you to set any last prefereces. under the last tab you will see a box that will say something like "booktype to DVD ROM" tick it and then click ok. here is a picture of what it should look like. and I don't have you burner so I'm not 100% sure that it can booktype, you will have to search it. But it seems like a really new model so it probably can.
my burner is a lite-on and lite-ons use there own booktyping utility so that is why my box is greyed out.
and here is a guide to use shrink if you have never used it before.
http://www.dvdplusvideo.com/tutorial012.html
and here is another for Shrink's prefences.
http://www.dvdplusvideo.com/tutorial002.html
when you've gone through the guide and feel like thanking someone for it don't thank me, please direct all praise to fasfrank.
This message has been edited since posting. Last time this message was edited on 5. November 2005 @ 09:30
|
|
Advertisement
|
|
|
|
sumaba
Junior Member
|
5. November 2005 @ 09:59 |
Link to this message
|
That is with using my Sony /Nero setup? I can only record/burn with downloadstudio. My Sony/Nero setting is for dvd-rom. Ihope I am understanding you. Frustrating for you if I am not. When I try to burn what download let me copy then I get "no compatible file found " thru Nero. But with Download Studio I at least am able to copy something that will play on my computer. But shows "codec not supported " on my Lasonic player. Does this help clear my situation or maybe you understood all of that already. What do I do?
Thank you
|
|
