|
|
|
Communication failure when burning discs
|
|
Senior Member
|
25. October 2005 @ 10:28 |
Link to this message
|
|
Hi everybody. I am having trouble burning dvd's, or cd's for that matter. This is the first time I have tried to burn using this computer. I get as far as the lead-in then a "communication error" shows up in Nero and burning fails. This happens with dvd' or cd's. I have tried to burn with dvddecrypter and stil get an error message after the lead in. I am using Fuji DVD+R. Lite-on SOHW-1633SBGS4. I have updated aspi drivers, no firmware update for the drive is available, I've un/reinstalled the drive all to no avail. I looked on other threads for similiar problems, however did not find any. Does anyone have any suggestions?
|
|
Advertisement
|
|
|
|
|
david66
Senior Member
|
25. October 2005 @ 16:35 |
Link to this message
|
|
is this burner an external if so check your computer to see if it has uab 1 or 2 i have a sohw 1633 internal and have no problems if you have an external drive and do not have usb 2 on your computer this could be the source of your problem also check the lite on web site for firmware updates
|
|
david66
Senior Member
|
25. October 2005 @ 16:49 |
Link to this message
|
|
BSOS is the newest firmware for your drive this can be had from liteon.com
|
|
Bigfatboy
Member
|
25. October 2005 @ 16:50 |
Link to this message
|
|
post your nero log here
find your log here - C:\Program Files\Ahead\Nero\NeroHistory
also do not post your nero serial # it starts with 1a23 or similar
peace
This message has been edited since posting. Last time this message was edited on 25. October 2005 @ 16:51
|
Senior Member
|
25. October 2005 @ 20:30 |
Link to this message
|
Thanks for your interest people. Here is a typical error log:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/17/2003 12:18:06 AM
Nero version: 6.3.1.17 (Nero Express)
Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BGS4 - HA 2 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <LITE-ON DVDRW SOHW-1633S>Version: BGS4 - HA 2 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 2
=== Scsi-Device-Map ===
CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 2 ID 0 DMA: On
DiskPeripheral : QUANTUM Bigfoot TX8.0AT atapi Port 2 ID 1 DMA: On
DiskPeripheral : HDS722580VLAT20 atapi Port 3 ID 0 DMA: On
=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-1633S E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 702MB (719288kB)
Free physical memory: 383MB (392904kB)
Memory in use : 45 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
21.10.2005
UDF/ISO compilation
1:25:38 AM #1 Phase 112 File dlgbrnst.cpp, Line 1845
DVD-Video files reallocation started
1:25:38 AM #2 Phase 114 File dlgbrnst.cpp, Line 1845
DVD-Video files reallocation completed (no file modified)
1:25:38 AM #3 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
1:25:38 AM #4 Phase 111 File dlgbrnst.cpp, Line 1845
DVD-Video files sorted
1:25:38 AM #5 SCSI -1066 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x03435000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xDF 0x00 0x0F 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
1:25:38 AM #6 Text 0 File Reader.cpp, Line 118
Reader running
1:25:38 AM #7 Text 0 File Writer.cpp, Line 124
Writer LITE-ON DVDRW SOHW-1633S running
1:25:38 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
1:25:38 AM #9 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
1:25:38 AM #10 Text 0 File Burncd.cpp, Line 3172
Turn on Disc-at-once, using DVD media
1:25:38 AM #11 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 72751 ( 16:10.01, 142MB)
1:25:38 AM #12 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO (enabled: CD)
1:25:38 AM #13 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD+R
Disc Manufacturer ID: YUDEN000, Media Type ID: T02, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3
1:25:38 AM #14 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================
1:25:38 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 72752 (72752) = #72752/16:10.2
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 72752 blocks [LITE-ON DVDRW SOHW-1633S]
--------------------------------------------------------------
1:25:38 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 148996096, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
72752 | lead-out | 1 | 0x00 | 0x41
1:25:39 AM #17 Phase 24 File dlgbrnst.cpp, Line 1845
Caching of files started
1:25:39 AM #18 Text 0 File Burncd.cpp, Line 4182
Cache writing successful.
1:25:39 AM #19 Phase 25 File dlgbrnst.cpp, Line 1845
Caching of files completed
1:25:39 AM #20 Phase 36 File dlgbrnst.cpp, Line 1845
Burn process started at 8x (11,080 KB/s)
1:25:39 AM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
1:25:39 AM #22 Text 0 File Cdrdrv.cpp, Line 8120
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: YUDEN000
Media type ID: T02
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 59 55 44 45 4E - 30 30 30 54 30 32 00 38 ...YUDEN000T02.8
23 54 37 10 02 4E 72 02 - 8C 63 16 16 0B 0B 0A 0A #T7..Nr..c......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
1:25:39 AM #23 SCSI -1066 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x03438000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xDF 0x00 0x0F 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
1:25:39 AM #24 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 1:44,864 (104864ms) -> OK
1:25:39 AM #25 Text 0 File DVDPlusRW.cpp, Line 613
Start write address at LBA 0
DVD high compatibility mode: Yes
1:26:18 AM #26 SCSI -1024 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0AA70000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x08
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x01 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x08 0x03
1:26:18 AM #27 CDR -1024 File Writer.cpp, Line 304
Communication failure
1:26:18 AM #28 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
1:26:18 AM #29 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
1:26:20 AM #30 Phase 127 File dlgbrnst.cpp, Line 1845
Generating DVD high compatibility borders
1:27:21 AM #31 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
1:27:21 AM #32 Phase 129 File dlgbrnst.cpp, Line 1845
Generating DVD borders completed successfully
1:27:21 AM #33 SCSI -1066 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x03436000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xDF 0x00 0x0F 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
1:27:21 AM #34 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
1:27:21 AM #35 Phase 38 File dlgbrnst.cpp, Line 1845
Burn process failed at 8x (11,080 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/18/2001 12:07:32 AM
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 8:59:44 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
Senior Member
|
25. October 2005 @ 20:44 |
Link to this message
|
|
BTW, I can't upgrade firmware with BSOS, my computer gives the message that my drive is 1633s BGS4 and BSOS is only for 1633s.
|
|
david66
Senior Member
|
26. October 2005 @ 09:43 |
Link to this message
|
|
bsos is the newest firmware for your burner you are using a older firmware i have the same burner as yours and i use bsos go to lite on site for download tour burner is sohw1633s bsg4 is your current firmware you can upgrade
|
|
Bigfatboy
Member
|
26. October 2005 @ 15:28 |
Link to this message
|
|
This message has been edited since posting. Last time this message was edited on 26. October 2005 @ 15:28
|
Senior Member
|
27. October 2005 @ 11:08 |
Link to this message
|
|
I tried to update firmware. When I execute BSOS it won't open, giving the message that it is only for 1633 not 1633 bsg4. Anyway, I called gateway a few days ago and they sent me a new drive, FREE, a tsh552b. It seems to work well and specs look fairly comparable to the lite-on(??). Thanks for your help guys!!
|
|
Advertisement
|
|
|
Senior Member
|
31. October 2005 @ 14:24 |
Link to this message
|
|
Just an FYI i had the very same problem as you with the exact same drive. Sometimes when your firmware is behind so far, you have to go back a few firmware revisions and get that to take, then go up to the next one. I went to BSOC and then to BSOS. That error message had me scratching my head, as it says the firmware is only for a specific drive, and then lists your drive exactly. Next time you run in to an old firmware, and the new one doesn't want to take, try going up incrementally. It worked for my Lite-on, and now it has BSOS on it no problems.. It wasn't a problem with the drive, just the firmware revision jump was too much for it to handle.
Die CMC Mag!!! |
|
