|
|
|
Nero 7 conflicts log posted
|
|
|
jahanna77
Junior Member
|
11. November 2005 @ 17:37 |
Link to this message
|
|
I have been using dvd shrink and dvd decrypter for a while now and as soon as I installed nero 7 all of my burns turn into coasters. I don't drink that much. Is there any other software that conflicts with Nero 7.
Also now I am having a problem just writing simple files to my cd-r. I uninstalled Nero and then tried another burn and it came out better. Atleast it was readable. But I forgot that I decrypted the files while Nero 7 was still installed. I need some help.My firmware is up to date and drivers as well.
Dvd Software installed:
Dvd Fab,,,,,,crap
Dvd decrypter,,,,,,,,,never a problem
Dvd shrink,,,,,,,,,,,," "
Nero 7
Amd 1800 xp
win xp
512 ram
60 gig hard
Liteon sohw-1633s
MEDIA IS GOOD Allready went through that @#$&
|
|
Advertisement
|
  |
|
|
Moderator
|
12. November 2005 @ 08:00 |
Link to this message
|
Well I just got Nero 7 ... hope will find time to get it installed and tested.
With Nero a common problem is caused when you install InCD. Did you install that?
|
|
jahanna77
Junior Member
|
12. November 2005 @ 10:49 |
Link to this message
|
na i did not install that. I just uninstalled Nero total wipe and installed the updated version. Then this time I did install incd cause i thought that might have caused something so we will see.
|
|
jahanna77
Junior Member
|
12. November 2005 @ 18:35 |
Link to this message
|
James Hanna
J.A. Hanna Renovations
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 8/14/2002 3:03:36 PM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 7.0.1.2
Internal Version: 7, 0, 1, 2
(Nero Express)
Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BS0S - HA 1 TA 0 - 7.0.1.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <Generic DVD-ROM >Version: 1.0 - HA 1 TA 1 - 7.0.1.2
Adapter driver: <SCSI> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y060L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SONY DVD RW DRU-530A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 1 ID 1 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 gxc122p Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
Generic DVD-ROM E: CDRom1
LITE-ON DVDRW SOHW-1633S F: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 85MB (87780kB)
Memory in use : 83 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
12.11.2005
Burn DVD Image
11:15:38 PM #1 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 72704KB of Memory
11:15:38 PM #2 Text 0 File Reader.cpp, Line 124
Reader running
11:15:38 PM #3 Text 0 File Writer.cpp, Line 113
Writer F: LITE-ON DVDRW SOHW-1633S running
11:15:38 PM #4 Text 0 File Burncd.cpp, Line 3302
Turn on Disc-At-Once, using DVD media
11:15:38 PM #5 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2234798 (496:37.23, 4364MB)
11:15:38 PM #6 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)
11:15:38 PM #7 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD+R
Disc Manufacturer ID: RITEK, Media Type ID: R03, Product revision number: 2
Disc Application Code: 0, Extended Information Indicators: 3
11:15:38 PM #8 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
11:15:38 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2234799 (2234799) = #2234799/496:37.24
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2234799 blocks [F: LITE-ON DVDRW SOHW-1633S]
--------------------------------------------------------------
11:15:38 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [F: LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4576868352, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2234799 | lead-out | 1 | 0x41 | 0x00
11:15:38 PM #11 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
11:15:38 PM #12 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 4x (5,540 KB/s)
11:15:38 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
11:15:38 PM #14 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: RITEK...
Media type ID: R03
Product revision number: 2
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 52 49 54 45 4B - 00 00 00 52 30 33 02 38 ...RITEK...R03.8
23 54 37 20 00 5D 6C 00 - B2 67 15 15 0B 0B 08 08 #T7..]l..g......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
11:15:38 PM #15 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes
11:29:38 PM #16 Text 0 File WriterStatus.cpp, Line 116
<F: LITE-ON DVDRW SOHW-1633S> start writing Lead-Out at LBA 2234799 (2219AFh), length 0 blocks
11:29:38 PM #17 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
11:29:57 PM #18 SPTI -1176 File SCSIPassThrough.cpp, Line 323
F: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x72
Sense Qual: 0x02
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 72 02
Buffer x03cc0c00: Len x20
11:29:57 PM #19 CDR -1176 File ThreadedTransferInterface.cpp, Line 1937
Session fixation error
F: LITE-ON DVDRW SOHW-1633S
11:29:57 PM #20 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1937
Could not perform end of Disc-at-once
11:30:15 PM #21 SPTI -1176 File SCSIPassThrough.cpp, Line 323
F: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x72
Sense Qual: 0x02
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 72 02
Buffer x03cc0c00: Len x20
11:30:15 PM #22 Phase 127 File dlgbrnst.cpp, Line 1725
Generating DVD high compatibility borders
11:30:15 PM #23 Phase 129 File dlgbrnst.cpp, Line 1725
Generating DVD borders completed successfully
11:30:15 PM #24 Phase 38 File dlgbrnst.cpp, Line 1725
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 8/14/2002 3:03:36 PM
File 'Drivers\InCDfs.SYS': Ver=5, 0, 0, 4, size=101760 bytes, created 10/14/2005 12:00:36 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=5, 0, 0, 4, size=29440 bytes, created 10/14/2005 12:01:56 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=5, 0, 0, 4, size=8704 bytes, created 10/14/2005 12:00:32 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 8/4/2004 12:59:41 AM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
Moderator
|
12. November 2005 @ 19:32 |
Link to this message
|
|
really ... you should uninstall InCD
|
Moderator
|
13. November 2005 @ 08:03 |
Link to this message
|
Quote:
Bus Type : default (0) -> ATAPI, detected: ?
- as your burner is internal to the PC, that question mark is saying your ATAPI drivers still aren't loaded correctly, try to fix via this - http://home.comcast.net/~bbmayo/FAQ.htm
Quote:
Physical memory : 511MB (523760kB)
Free physical memory: 85MB (87780kB)
Memory in use : 83 %
- wow where's all your free memory gone ?. 512MB is sufficient total memory but something's pinched it all. you need to close down more programs prior to dvd work/burning to free up more memory
Quote:
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Session fixation error
- follow other suggestions
Quote:
Existing drivers:
File 'Drivers\InCDfs.SYS': Ver=5, 0, 0, 4, size=101760 bytes, created 10/14/2005 12:00:36 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=5, 0, 0, 4, size=29440 bytes, created 10/14/2005 12:01:56 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=5, 0, 0, 4, size=8704 bytes, created 10/14/2005 12:00:32 PM (InCD4 driver for win NT/2K/XP)
- InCD is Nero's horrid 'packet writing software', uninstall Nero then uninstall completely via Nero's Clean Tools, then reinstall Nero WITHOUT installing InCD
ie as per flip218's reply, uninstall InCD..
Also, the ATAPI drivers are supposed to be listed in this section, that'll be fixed by fixing the DMA settings as per further up my reply
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***This message has been edited since posting. Last time this message was edited on 13. November 2005 @ 08:04
|
|
jahanna77
Junior Member
|
13. November 2005 @ 12:18 |
Link to this message
|
|
ok let me try that.
|
|
jahanna77
Junior Member
|
13. November 2005 @ 14:43 |
Link to this message
|
|
well i downloaded the aspi thing but I am confused on the installation. It says to open the install.bat but wants to specify what os it is for. xp32 for PENTIUM 1\2\3\4 and xp64 for Itanium. Whitch one should I use for the command since I am using a amd xp 1800. That is not on the list.
|
Moderator
|
13. November 2005 @ 16:09 |
Link to this message
|
|
|
jahanna77
Junior Member
|
13. November 2005 @ 17:14 |
Link to this message
|
i can reinstall Nero 7 now right without incd. Or should I have done that before the aspi stuff
|
Moderator
|
13. November 2005 @ 18:29 |
Link to this message
|
from that same link get aspi check. check to see if your aspi was changed after the Nero install. If it was just re-run ForceASPI again.
|
|
jahanna77
Junior Member
|
14. November 2005 @ 16:32 |
Link to this message
|
Ok now Nero is burning but I am getting a bad burn with it. I burn at 4x so it is not like I am burning to fast. I went throught the movie and found where it was skipping and then went to the file to see if it skipped on the file and it doesent. Which tells me that it is the burn not the rip. Now what do I do to fix that. I was burning fine for a long time so I would love to fix this problem. Please help
.
|
Moderator
|
15. November 2005 @ 22:10 |
Link to this message
|
|
pls post (latest) LAST section of log so we can see what's left to tweak...
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
jahanna77
Junior Member
|
16. November 2005 @ 02:47 |
Link to this message
|
|
I thought that there was only a log if there was an error. Because The burn completes but at bad quality. Where do I find the log if there is one?
|
Moderator
|
16. November 2005 @ 03:09 |
Link to this message
|
|
All burns, good and bad, are appended to c:\program files\ahead\nero\nerohistory.log. It must automatically housekeep itself as its cleared down now and then..
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
jahanna77
Junior Member
|
16. November 2005 @ 10:33 |
Link to this message
|
|
This was the latest burn but i forced aspi and it still has a question mark.
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 11/13/2005 10:08:35 PM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero API version: 7.0.1.2
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\Nero - Burning Rom
Internal Version: 7, 0, 1, 2
Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BS0S - HA 1 TA 1 - 7.0.1.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y060L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SONY DVD RW DRU-530A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 1 ID 1 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 gxc122p Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
SONY DVD RW DRU-530A D: CDRom0
Generic DVD-ROM E: CDRom2
LITE-ON DVDRW SOHW-1633S F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 237MB (242880kB)
Memory in use : 53
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
16.11.2005
NeroAPI
2:52:58 PM #1 Phase 112 File APIProgress.cpp, Line 278
DVD-Video files reallocation started
2:52:58 PM #2 Phase 114 File APIProgress.cpp, Line 278
DVD-Video files reallocation completed (no file modified)
2:52:58 PM #3 Phase 111 File APIProgress.cpp, Line 278
DVD-Video files sorted
2:52:58 PM #4 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 72704KB of Memory
2:52:58 PM #5 Text 0 File Reader.cpp, Line 124
Reader running
2:52:58 PM #6 Text 0 File Writer.cpp, Line 113
Writer F: LITE-ON DVDRW SOHW-1633S running
2:52:58 PM #7 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
2:52:58 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
2:52:58 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
2:52:58 PM #10 Text 0 File Burncd.cpp, Line 3302
Turn on Disc-At-Once, using DVD media
2:52:58 PM #11 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1963087 (436:14.37, 3834MB)
2:52:58 PM #12 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO
2:52:58 PM #13 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD+R
Disc Manufacturer ID: RITEK, Media Type ID: R03, Product revision number: 2
Disc Application Code: 0, Extended Information Indicators: 3
2:52:58 PM #14 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
2:52:58 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1963088 (1963088) = #1963088/436:14.38
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1963088 blocks [F: LITE-ON DVDRW SOHW-1633S]
--------------------------------------------------------------
2:52:58 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [F: LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4020404224, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1963088 | lead-out | 1 | 0x41 | 0x00
2:52:58 PM #17 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
2:52:58 PM #18 Phase 24 File APIProgress.cpp, Line 278
Caching of files started
2:52:58 PM #19 Text 0 File Burncd.cpp, Line 4132
Cache writing successful.
2:52:58 PM #20 Phase 25 File APIProgress.cpp, Line 278
Caching of files completed
2:52:58 PM #21 Phase 36 File APIProgress.cpp, Line 278
Burn process started at 4x (5,540 KB/s)
2:52:59 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
2:52:59 PM #23 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: RITEK...
Media type ID: R03
Product revision number: 2
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 52 49 54 45 4B - 00 00 00 52 30 33 02 38 ...RITEK...R03.8
23 54 37 20 00 5D 6C 00 - B2 67 15 15 0B 0B 08 08 #T7..]l..g......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
2:52:59 PM #24 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes
3:05:21 PM #25 Text 0 File WriterStatus.cpp, Line 116
<F: LITE-ON DVDRW SOHW-1633S> start writing Lead-Out at LBA 1963088 (1DF450h), length 0 blocks
3:05:21 PM #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
3:05:45 PM #27 Phase 37 File APIProgress.cpp, Line 278
Burn process completed successfully at 4x (5,540 KB/s)
3:05:46 PM #28 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
3:05:46 PM #29 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 11/13/2005 10:08:35 PM
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
This message has been edited since posting. Last time this message was edited on 16. November 2005 @ 10:57
|
Moderator
|
16. November 2005 @ 11:35 |
Link to this message
|
|
hi, you're almost there now, the question mark is there still and the atapi drivers still aren't loaded correctly - try redoing the DMA fix..
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
jahanna77
Junior Member
|
16. November 2005 @ 13:24 |
Link to this message
|
|
well I did the force aspi angain (uninstall.bat then install.bat) and did a fake burn to get a log and it still came up with the question mark. Is there a conflict when the two burners are on atapi port 1?
|
Moderator
|
16. November 2005 @ 18:28 |
Link to this message
|
This message has been edited since posting. Last time this message was edited on 16. November 2005 @ 18:29
|
Moderator
|
16. November 2005 @ 18:29 |
Link to this message
|
If you did that and you run ASPICHK you should see this ...
This message has been edited since posting. Last time this message was edited on 16. November 2005 @ 18:30
|
|
jahanna77
Junior Member
|
16. November 2005 @ 18:34 |
Link to this message
|
|
Yep and I did it like 3 times and it says that the drivers are loaded correctly
Driver : Aspi32
Description : ASPI for WIN32 Kernel Driver
Version : 4.71 (0002)
Company : Adaptec
Driver : atapi
Description : n/a
Version : n/a
Company : n/a
ASPI Information
----------------
System ASPI : ASPI is installed and working properly
WNASPI32.DLL : 4.71 (0002) 45056 bytes November 13, 2005
ASPI32.SYS : 4.71 (0002) 16877 bytes November 13, 2005
WINASPI.DLL : n/a 4455 bytes November 13, 2005
WOWPOST.EXE : n/a 3535 bytes November 13, 2005
Nero ASPI : ASPI is installed and working properly
wnaspi32.dll : 2.0.1.74 164112 bytes November 02, 2004
This message has been edited since posting. Last time this message was edited on 16. November 2005 @ 18:48
|
Senior Member
|
17. November 2005 @ 01:16 |
Link to this message
|
I had the same problem with Nero Audio cds was my problem worked sound for ages then went Pete Tong if you got ant Nvidia <nvatabus> ide drivers get shot of them use the drivers built into windows ive posted two logs so you can see the diff betwee them hope this helps.
Brian log 6
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 12:06:00
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 17:35:32
Nero Version: 6.6.0.8 (Nero Express)
Recorder: <SONY DVD RW DRU-800A> Version: KY03 - HA 2 TA 3 - 6.6.0.8
Adapter driver: <nvatabus> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <PHILIPS PBDV16LSP1 >Version: B1.8 - HA 0 TA 0 - 6.6.0.8
Adapter driver: <ultra> HA 0
=== Scsi-Device-Map ===
CdRomPeripheral : PHILIPS PBDV16LSP1 B1.8 ultra Port 0 ID 0 DMA: Off
OtherPeripheral : SI Pseudo Device 0000 Si3114r5 Port 1 ID 16 DMA: Off
DiskPeripheral : Maxtor 6L200P0 nvatabus Port 2 ID 0 DMA: Off
DiskPeripheral : SAMSUNG SP1614N nvatabus Port 2 ID 1 DMA: Off
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B nvatabus Port 2 ID 2 DMA: Off
CdRomPeripheral : SONY DVD RW DRU-800A nvatabus Port 2 ID 3 DMA: Off
DiskPeripheral : SAMSUNG SP1614C nvatabus Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
PHILIPS PBDV16LSP1 K: CDRom2
HL-DT-ST DVDRAM GSA-4163 D: CDRom0
SONY DVD RW DRU-800A E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1047856kB)
Free physical memory: 669MB (685900kB)
Memory in use : 34 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
17.11.2005
Audio CD
10:30:12 #1 CDADOC -1 File Cdadoc.cpp, Line 1465
Audio item log info:
Audio document burn settings:
=============================
Burn mode: DAO,
CD Text: On,
Cache disk or network files: No,
Cache small files: No,
Cache files smaller than 65536 bytes.
Audio Multisession: No
List of audio tracks:
=====================
Track 01: Length: 03:39.04, Pause frames: 150, Filters: 3, Name: '02. Push The Button (Sugababes).mp3'.
Track 02: Length: 03:44.74, Pause frames: 000, Filters: 3, Name: '03. What You Waiting For (Gwen Stefani).mp3'.
Total size: 07:26.03
10:30:12 #2 Text 0 File Burncd.cpp, Line 2868
SONY DVD RW DRU-800A
Power-Burn activated
10:30:12 #3 Text 0 File Reader.cpp, Line 127
Reader running
10:30:12 #4 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DRU-800A running
10:30:12 #5 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
10:30:12 #6 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using CD-R/RW media
10:30:13 #7 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 33302 ( 7:26.02)
10:30:13 #8 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)
10:30:13 #9 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: SONY DVD RW DRU-800A;
CDRW code: 00 97 26 65; OSJ entry from: CMC Magnetics Corporation
ATIP Data:
Special Info [hex] 1: D1 00 C6, 2: 61 1A 41 (LI 97:26.65), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 02 4C B0, 2: 4A C8 36, 3: 00 80 80 (invalid)
10:30:13 #10 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
10:30:13 #11 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_AUDIO_NOPRE (02. Push The Button (Sugababes).mp3)
2 indices, index0 (150) not provided
original disc pos #0 + 16429 (16429) = #16429/3:39.4
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_ULTRARAW96, 2448, config 0, wanted index0 0 blocks, length 16429 blocks [SONY DVD RW DRU-800A]
1: TRM_AUDIO_NOPRE (03. What You Waiting For (Gwen Stefani).mp3)
2 indices, index0 (0) not provided
original disc pos #0 + 16874 (16874) = #16874/3:44.74
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_ULTRARAW96, 2448, config 0, wanted index0 0 blocks, length 16874 blocks [SONY DVD RW DRU-800A]
--------------------------------------------------------------
10:30:13 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [SONY DVD RW DRU-800A] for write in raw writing
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 2:
1: TRM_AUDIO_ULTRARAW96, 2448/0x00, FilePos 0 367200 40585392, ISRC ""
2: TRM_AUDIO_ULTRARAW96, 2448/0x00, FilePos 40585392 40585392 81892944, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x01 | 0x00
-150 | 1 | 0 | 0x21 | 0x00
0 | 1 | 1 | 0x21 | 0x00
16429 | 2 | 0 | 0x21 | 0x00
16429 | 2 | 1 | 0x21 | 0x00
33303 | lead-out | 1 | 0x01 | 0x00
10:30:15 #13 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (600 KB/s)
10:30:15 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, no disc pos, no patch infos, orig at #0): write at #0
10:30:15 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #16429
10:30:15 #16 Text 0 File Mmc.cpp, Line 16479
StartDAO : CD-Text - On
10:30:15 #17 Text 0 File Mmc.cpp, Line 21241
Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : ON
10:33:18 #18 Text 0 File WriterStatus.cpp, Line 116
<SONY DVD RW DRU-800A > start writing Lead-Out at LBA 33303 (8217h), lenght 6750 blocks
10:33:41 #19 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
10:33:48 #20 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 4x (600 KB/s)
10:33:48 #21 Phase 78 File dlgbrnst.cpp, Line 1832
Data verification started
10:34:12 #22 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)
10:34:12 #23 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Recorder needs eject between burn and verify. Auto reload.
(Medium in drive: Unknown. Medium required by compilation: CD-R/RW.)
10:34:12 #24 Text 0 File ThreadedTransferInterface.cpp, Line 1111
Removed 2 run-out blocks from end of track 1. Length: 16429 -> 16427.
10:34:12 #25 Text 0 File ThreadedTransferInterface.cpp, Line 1111
Removed 2 run-out blocks from end of track 2. Length: 16874 -> 16872.
10:34:32 #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
10:34:47 #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
10:34:47 #28 Phase 80 File dlgbrnst.cpp, Line 1832
Data verification completed successfully
10:34:48 #29 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
10:34:48 #30 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 12:06:00
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 05/11/2002 15:16:52
File 'Drivers\PXHELP20.SYS': Ver=2.02.39a, size=16288 bytes, created 25/09/2002 02:02:00 (Prassi/Veritas driver for win 2K)
File 'Drivers\nvatabus.sys': Ver=5.10.2600.0446 built by: WinDDK, size=79360 bytes, created 26/07/2005 10:16:44 (Adapter driver for rec)
File 'Drivers\ultra.sys': Ver= 1.43 (Build 0603), size=36736 bytes, created 17/08/2001 12:52:22 (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 1 (Security Option)
log 2
Brian log 5
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 12:06:00
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 17:35:32
Nero Version: 6.6.0.8 (Nero Express)
Recorder: <SONY DVD RW DRU-800A> Version: KY03 - HA 3 TA 1 - 6.6.0.8
Adapter driver: <atapi> HA 3
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HL-DT-ST DVDRAM GSA-4163B>Version: A104 - HA 3 TA 0 - 6.6.0.8
Adapter driver: <atapi> HA 3
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6L200P0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : SAMSUNG SP1614N atapi Port 0 ID 1 DMA: On
DiskPeripheral : SAMSUNG SP1614C atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 3 ID 0 DMA: On
CdRomPeripheral : SONY DVD RW DRU-800A atapi Port 3 ID 1 DMA: On
CdRomPeripheral : PHILIPS PBDV16LSP1 B1.8 ultra Port 4 ID 0 DMA: Off
OtherPeripheral : SI Pseudo Device 0000 Si3114r5 Port 5 ID 16 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4163 D: CDRom0
SONY DVD RW DRU-800A E: CDRom1
PHILIPS PBDV16LSP1 K: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1047856kB)
Free physical memory: 664MB (680872kB)
Memory in use : 35 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
17.11.2005
Audio CD
10:46:54 #1 CDADOC -1 File Cdadoc.cpp, Line 1465
Audio item log info:
Audio document burn settings:
=============================
Burn mode: DAO,
CD Text: On,
Cache disk or network files: No,
Cache small files: No,
Cache files smaller than 65536 bytes.
Audio Multisession: No
List of audio tracks:
=====================
Track 01: Length: 03:39.04, Pause frames: 150, Filters: 3, Name: '02. Push The Button (Sugababes).mp3'.
Track 02: Length: 03:44.74, Pause frames: 000, Filters: 3, Name: '03. What You Waiting For (Gwen Stefani).mp3'.
Total size: 07:26.03
10:46:54 #2 Text 0 File Burncd.cpp, Line 2868
SONY DVD RW DRU-800A
Power-Burn activated
10:46:54 #3 Text 0 File Reader.cpp, Line 127
Reader running
10:46:54 #4 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DRU-800A running
10:46:54 #5 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
10:46:54 #6 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using CD-R/RW media
10:46:55 #7 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 33302 ( 7:26.02)
10:46:55 #8 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)
10:46:55 #9 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: SONY DVD RW DRU-800A;
CDRW code: 00 97 26 65; OSJ entry from: CMC Magnetics Corporation
ATIP Data:
Special Info [hex] 1: D1 00 C6, 2: 61 1A 41 (LI 97:26.65), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 02 4C B0, 2: 4A C8 36, 3: 00 80 80 (invalid)
10:46:55 #10 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
10:46:55 #11 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_AUDIO_NOPRE (02. Push The Button (Sugababes).mp3)
2 indices, index0 (150) not provided
original disc pos #0 + 16429 (16429) = #16429/3:39.4
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_ULTRARAW96, 2448, config 0, wanted index0 0 blocks, length 16429 blocks [SONY DVD RW DRU-800A]
1: TRM_AUDIO_NOPRE (03. What You Waiting For (Gwen Stefani).mp3)
2 indices, index0 (0) not provided
original disc pos #0 + 16874 (16874) = #16874/3:44.74
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_ULTRARAW96, 2448, config 0, wanted index0 0 blocks, length 16874 blocks [SONY DVD RW DRU-800A]
--------------------------------------------------------------
10:46:55 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [SONY DVD RW DRU-800A] for write in raw writing
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 2:
1: TRM_AUDIO_ULTRARAW96, 2448/0x00, FilePos 0 367200 40585392, ISRC ""
2: TRM_AUDIO_ULTRARAW96, 2448/0x00, FilePos 40585392 40585392 81892944, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x01 | 0x00
-150 | 1 | 0 | 0x21 | 0x00
0 | 1 | 1 | 0x21 | 0x00
16429 | 2 | 0 | 0x21 | 0x00
16429 | 2 | 1 | 0x21 | 0x00
33303 | lead-out | 1 | 0x01 | 0x00
10:46:57 #13 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (600 KB/s)
10:46:57 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, no disc pos, no patch infos, orig at #0): write at #0
10:46:57 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #16429
10:46:57 #16 Text 0 File Mmc.cpp, Line 16479
StartDAO : CD-Text - On
10:46:57 #17 Text 0 File Mmc.cpp, Line 21241
Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : ON
10:49:53 #18 Text 0 File WriterStatus.cpp, Line 116
<SONY DVD RW DRU-800A > start writing Lead-Out at LBA 33303 (8217h), lenght 6750 blocks
10:50:16 #19 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
10:50:23 #20 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 4x (600 KB/s)
10:50:23 #21 Phase 78 File dlgbrnst.cpp, Line 1832
Data verification started
10:50:48 #22 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)
10:50:48 #23 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Recorder needs eject between burn and verify. Auto reload.
(Medium in drive: Unknown. Medium required by compilation: CD-R/RW.)
10:50:48 #24 Text 0 File ThreadedTransferInterface.cpp, Line 1111
Removed 2 run-out blocks from end of track 1. Length: 16429 -> 16427.
10:50:48 #25 Text 0 File ThreadedTransferInterface.cpp, Line 1111
Removed 2 run-out blocks from end of track 2. Length: 16874 -> 16872.
10:51:08 #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
10:51:23 #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
10:51:23 #28 Phase 80 File dlgbrnst.cpp, Line 1832
Data verification completed successfully
10:51:24 #29 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
10:51:24 #30 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 12:06:00
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 05/11/2002 15:16:52
File 'Drivers\PXHELP20.SYS': Ver=2.02.39a, size=16288 bytes, created 25/09/2002 02:02:00 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 22:59:44 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 1 (Security Option)
|
|
jahanna77
Junior Member
|
17. November 2005 @ 08:13 |
Link to this message
|
|
the thing that I cant fix is the atapi being reconized That has to be why i get bad burns. Does anyone know how to fix that
|
Senior Member
|
17. November 2005 @ 08:45 |
Link to this message
|
It said on my pc ATAPI installed correctly when i ran the adaptec check, in device manager it said all drives on DMA but the Nero log said different said dma off and ATAPI ? i removed the ide nvidia drivers and used the windows ones instead ? what motherboard do you have whats the chipset for it???
|
|
Advertisement
|
|
|
|
jahanna77
Junior Member
|
17. November 2005 @ 10:10 |
Link to this message
|
|
mother board is k7s5a chipset PROCESSORS
462 pin Socket A supports the AMD® K7 processors
Athlon XP / Athlon / Duron processors
CHIPSET
SiS 735 System Chipset
Super I/O and LPC - ITE8705F
System Hardware Monitor: Built-in ITE8705
LAN: MAC integrated in SiS®735 & PHY on board (Optional)
AC97 Audio Codec
SYSTEM BIOS
AMI 2Mb Flash EEPROM
Supports Plug and Play 1.0A, AMP 1.2, Multi Boot, DMI
Support for ACPI revision 1.0 specification
MEMORY
2 DDR DIMM sockets and 2 DIMM sockets support (can not be used simultaneously)
Two 184-pin DDR SDRAM (DDR200, DDR266) or
Two 168-pin 3.3V SDRAM (PC100, PC133)
Maximum: 1.0GB (DDR or SDRAM)is sis735 system chipset
This message has been edited since posting. Last time this message was edited on 17. November 2005 @ 10:12
|
|
