|
|
|
The (new) Official PC building thread!
|
|
|
Bladerz05
Member
|
2. April 2008 @ 00:51 |
Link to this message
|
Originally posted by Bladerz05:
hey guys, im not having too much luck with my overclock....
ok so i go into my bios and my CPU clock ratio is already at 8X and i turn on my and i turn on my system memory multiplier to 2X as instructed. I turned up my CPU host Freq from 333 to 400 which is for 1600fsb but it changed my clock to 3.2 ghz and i was like hey thats nice so i left it. I did not know what to set my overvoltage controls to, so i set my memory to +.10 and my fsb overvoltage to +.25, no logic went into my choices, they just seemed right...i didnt mess with nothing else just did what you guys had instructed me to do so i saved settings and restarted....computer came on and shut off about 3 times before booting vista and i notice in easy tune that everything is back to pre-overclock settings...so i guess it didnt work...any help would be appreciated
ok set my cpu host freq to 375 which brought it to 3.0ghz and put voltages and memory to auto...do any of you find it strange that i am overclocking my 3.0ghz cpu to 3.0ghz? doesnt make any sense to me...in my experience the only processors that didnt ever run at what they were rated stock were the amd's. but anyways i go into vista and i am semi-satisfied so i run OCCT to test stability for 30mins. vista locks up in about 1:30 i restart and get nothing but blue screens of death...now im back to defaults and am slightly discouraged...any help please?
I am Lord Bladerzor.
|
|
Advertisement
|
 |
|
|
Senior Member
|
2. April 2008 @ 01:27 |
Link to this message
|
@Bladerz05
Quote:
vista locks up...
It could be a problem with Vista and your Hardware...Software (easy tune)...or possible driver incompatibility...
Also easy tune is not the way to go for OCing in my opinion...Do it through the Bios...
Here is a link to Ocing with Easy Tune that mentions problems with it...and Vista...
http://www.tomshardware.com/forum/237244-29-ocing-easy-tune
Quote:
This is due to to Vista's strict lock on DRM and lack of low level support. Some hardware Vista just won't let you touch. Many developers are already looking for ways around this, and there are many, and I mean many forseeable problems with this when it comes to pretty much any software that wants to directly access hardware.
I hope that helps...
|
AfterDawn Addict
|
2. April 2008 @ 02:54 |
Link to this message
|
|
LP531,
Good to hear from you. Go kick some butt! We're all behind you, in spirit anyway! Don't let the bastards get you down my friend, kick some serious butt!
Best Regards,
Russ
GigaByte 990FXA-UD5 - AMD FX-8320 @4.0GHz @1.312v - Corsair H-60 liquid CPU Cooler - 4x4 GB GSkill RipJaws DDR3/1866 Cas8, 8-9-9-24 - Corsair 400-R Case - OCZ FATAL1TY 550 watt Modular PSU - Intel 330 120GB SATA III SSD - WD Black 500GB SATA III - WD black 1 TB Sata III - WD Black 500GB SATA II - 2 Asus DRW-24B1ST DVD-Burner - Sony 420W 5.1 PL-II Suround Sound - GigaByte GTX550/1GB 970 Mhz Video - Asus VE247H 23.6" HDMI 1080p Monitor
 |
|
Bladerz05
Member
|
2. April 2008 @ 03:32 |
Link to this message
|
|
@LP
i was using the bios to overclock, i was just using easytune to keep an eye on things, i made no changes with easytune.
I am Lord Bladerzor.
|
AfterDawn Addict
4 product reviews
|
2. April 2008 @ 04:14 |
Link to this message
|
|
Lp: That's absurd. Good to see you back, I'm amazed you can afford to keep up the legal battle!
Bladerz05: Try using +0.3V for the memory voltage, or better yet try leaving all the voltages at auto. Also, your CPU multiplier needs to be 9x, not 8x if you're using an E8400 or E6850. If it's an E6750, then you're starting at 2.66hz, not 3Ghz and it'll be 8x.
Don't even open easytune though, it's simpler if you don't.
|
AfterDawn Addict
6 product reviews
|
2. April 2008 @ 13:16 |
Link to this message
|
good to see you LP and best of luck.
I need some recommendations on my case fans configuration. I have a cooler master stacker 830 evo. both side panels are vented. front fan blowing in and rear fan blowing out. this I know but should I have the top fan blowing in or out? I never had a case with a top fan before. I might add another front fan and 1 or two side fans later. for those of you that have experience with case with a top fan, what have you found to be most efficient, top fan blowing in or top fan blowing out? TIA and BTW, I'm using antec 120mm tricools.
Rig #1 Asus Rampage Formula Mobo, Intel Core2Quad Q9450 CPU @ 3.55ghz, 2gb Corsair DDR2 1066 Dominator Ram @ 5-5-5-15, TR Ultra 120 Extreme w/ Scythe 9 blade 110 cfm 120mm Fan HSF, HIS Radeon 512mb HD3850 IceQ TurboX GPU, Corsair 620HX P/S, CM Stacker 830 Evo Case, Rig #2 Asus P5W DH Deluxe Mobo, Intel C2D E6600 CPU @ 3.6ghz, 2gb Corsair XMS2 DDR2 800 Ram @ 4-4-4-12-2t, Zalman CNPS9500LED HSF, Sapphire Radeon X850XT PE GPU, Corsair 620HX P/S, Cooler Master Mystique Case, Viewsonic 20.1" Widescreen Digital LCD Monitor, Klipsch Promedia Ultra 5.1 THX Desktop Speakers, http://valid.x86-secret.com/show_oc.php?id=348351 http://valid.x86-secret.com/show_oc.php?id=236435 |
AfterDawn Addict
4 product reviews
|
2. April 2008 @ 13:21 |
Link to this message
|
|
In my experience, if you're using side intake have the top fan blowing out. If you're using side exhaust or no side fans at all, have the top fan blowing in - this is because intake fans usually push less air than exhaust ones due to the different way they are mounted and the fact that they have dust filters etc. on them. This is of course assuming all the fans are the same size. I think they are with the Stacker.
|
AfterDawn Addict
4 product reviews
|
2. April 2008 @ 13:25 |
Link to this message
|
@Mort81
i have the CM RC-690. and thanks to GM i got a nice air flow useing the top fans.
i have 2 of them set as exhaust along with my rear fan..
i also have the front fan as intake and the 2 side panels as intake also..
1 of the top fans is connected to the mobo and the other to PSU.. same goes for my side fans. then my rear is connected to the mobo and the front fan is connected to the PSU. so i have 6 fans total 3 on the mobo with the CPU fan and 3 to the PSU. and it dropped my temps about 8c once i put the top fans in...
ok ill say it before someone else does. i dont have anything connected to my mobo right now...lol
|
AfterDawn Addict
4 product reviews
|
2. April 2008 @ 13:29 |
Link to this message
|
|
i have 4 120mm fans 2 side and 1 rear and front. the top fans are the 140mm sucking out some bigtime air..lol cant wait to get this thing back together so i can play with this stuff more..lol
|
AfterDawn Addict
6 product reviews
|
2. April 2008 @ 13:34 |
Link to this message
|
|
it prolly won't make that big of a difference. I'll try the top blowing in 1st. front in, back out and top in.
LP,
I need you. I know you have a stacker :)
Rig #1 Asus Rampage Formula Mobo, Intel Core2Quad Q9450 CPU @ 3.55ghz, 2gb Corsair DDR2 1066 Dominator Ram @ 5-5-5-15, TR Ultra 120 Extreme w/ Scythe 9 blade 110 cfm 120mm Fan HSF, HIS Radeon 512mb HD3850 IceQ TurboX GPU, Corsair 620HX P/S, CM Stacker 830 Evo Case, Rig #2 Asus P5W DH Deluxe Mobo, Intel C2D E6600 CPU @ 3.6ghz, 2gb Corsair XMS2 DDR2 800 Ram @ 4-4-4-12-2t, Zalman CNPS9500LED HSF, Sapphire Radeon X850XT PE GPU, Corsair 620HX P/S, Cooler Master Mystique Case, Viewsonic 20.1" Widescreen Digital LCD Monitor, Klipsch Promedia Ultra 5.1 THX Desktop Speakers, http://valid.x86-secret.com/show_oc.php?id=348351 http://valid.x86-secret.com/show_oc.php?id=236435 |
AfterDawn Addict
6 product reviews
|
2. April 2008 @ 14:51 |
Link to this message
|
Rig #1 Asus Rampage Formula Mobo, Intel Core2Quad Q9450 CPU @ 3.55ghz, 2gb Corsair DDR2 1066 Dominator Ram @ 5-5-5-15, TR Ultra 120 Extreme w/ Scythe 9 blade 110 cfm 120mm Fan HSF, HIS Radeon 512mb HD3850 IceQ TurboX GPU, Corsair 620HX P/S, CM Stacker 830 Evo Case, Rig #2 Asus P5W DH Deluxe Mobo, Intel C2D E6600 CPU @ 3.6ghz, 2gb Corsair XMS2 DDR2 800 Ram @ 4-4-4-12-2t, Zalman CNPS9500LED HSF, Sapphire Radeon X850XT PE GPU, Corsair 620HX P/S, Cooler Master Mystique Case, Viewsonic 20.1" Widescreen Digital LCD Monitor, Klipsch Promedia Ultra 5.1 THX Desktop Speakers, http://valid.x86-secret.com/show_oc.php?id=348351 http://valid.x86-secret.com/show_oc.php?id=236435 |
AfterDawn Addict
|
2. April 2008 @ 16:46 |
Link to this message
|
|
@Mort81,
I don't have the Stacker 830 but it made perfect sense to me on using the top fan as exhaust because HOT air rises and getting the hot air out from the source was the best idea I could come up with. ;)
Your case is a little different than the CM-690 so a little playing around might be in order. Your power supply is on top too so another thing to look at.
....gm
|
AfterDawn Addict
6 product reviews
|
2. April 2008 @ 16:50 |
Link to this message
|
I finally took that big leap. ordered the asus rampage formula mobo and an intel E3110. against my own advice, I ordered the oem/tray E3110. one year warranty as oppossed to three with the retail version. I've got enough oem hsf's on the shelf already and if a cpu is going to die there's a very good chance it will do it within the 1st year.
I'll most likely upgrade to a 45nm quad core in a year or so anyway. this E3110 will give me something to play with in the meantime. cost me $501.91 for both delivered. $193.24 for the cpu and $308.67 for the mobo. here it is in a nutshell:
COOLER MASTER STACKER 830 EVO CASE $109.99
ASUS RAMPAGE FORMULA $308.67
INTEL E3110 XEON CPU $193.24
CORSAIR 620HX P/S $114.99
CORSAIR 2 X 1GB DDR2 1066 DOMINATOR RAM $65.99
THERMALRIGHT ULTRA 120 EXTREME CPU HS W/ SYTHE SFF21F FAN $73.11
SEAGATE SATA2 32MB 250GB HDD $86.87
HIS HD3850 512MB ICEQ TURBO VIDEO CARD $152.25
3) ANTEC TRICOOL120-RED CASE FAN $49.72
_______
$1154.83
Rig #1 Asus Rampage Formula Mobo, Intel Core2Quad Q9450 CPU @ 3.55ghz, 2gb Corsair DDR2 1066 Dominator Ram @ 5-5-5-15, TR Ultra 120 Extreme w/ Scythe 9 blade 110 cfm 120mm Fan HSF, HIS Radeon 512mb HD3850 IceQ TurboX GPU, Corsair 620HX P/S, CM Stacker 830 Evo Case, Rig #2 Asus P5W DH Deluxe Mobo, Intel C2D E6600 CPU @ 3.6ghz, 2gb Corsair XMS2 DDR2 800 Ram @ 4-4-4-12-2t, Zalman CNPS9500LED HSF, Sapphire Radeon X850XT PE GPU, Corsair 620HX P/S, Cooler Master Mystique Case, Viewsonic 20.1" Widescreen Digital LCD Monitor, Klipsch Promedia Ultra 5.1 THX Desktop Speakers, http://valid.x86-secret.com/show_oc.php?id=348351 http://valid.x86-secret.com/show_oc.php?id=236435This message has been edited since posting. Last time this message was edited on 2. April 2008 @ 16:58
|
AfterDawn Addict
|
2. April 2008 @ 21:14 |
Link to this message
|
Mort81,
Nice setup buddy!!! I think you'll be fine with that OEM cpu. ;) It's a Xeon Intel beauty!!! :P
NOW the other stuff you need to send to me and let me check it out to make sure it's of good quality and worthy of you having it. hehehe. j/k...
So when can we expect some "snap shots" of that new Morty machine plus some benchmarks??? :P
...gm
|
AfterDawn Addict
6 product reviews
|
2. April 2008 @ 22:30 |
Link to this message
|
gm,
I'll take some pics of before, during and after the build. it'll most likely be early next week before I get the mobo and cpu. I read a good review on the rampage formula in case anyone is interested.
I'm going to have about the same money in this build as I do my current rig only this one should be a fairly big step up on everything (except the p/s). hopeing to achieve 4.0ghz fairly easily. time will tell.
my mother or as sam and creaky say my "mum" wants to buy my current pc but I'll prolly just let her use it. I don't really want to sell it. I'll set it back stock to 2.4ghz and it'll still blow the doors off her old gateway PIII 1.4ghz pc.
I'm going to put my litey and benq dvdrw's in my new build and buy another dvdrw or dvd cdr combo drive (whatever's the cheapest) to put back in this one. I'm also going to put my samsung 400gb and maxtor 300gb hdd's in my new rig. I'll replace the maxtor one of these days with a seagate 500gb hdd or larger. my maxtor is only SATA1.5 and runs hotter and is louder than my others.
sure is quiet here tonight........................
Rig #1 Asus Rampage Formula Mobo, Intel Core2Quad Q9450 CPU @ 3.55ghz, 2gb Corsair DDR2 1066 Dominator Ram @ 5-5-5-15, TR Ultra 120 Extreme w/ Scythe 9 blade 110 cfm 120mm Fan HSF, HIS Radeon 512mb HD3850 IceQ TurboX GPU, Corsair 620HX P/S, CM Stacker 830 Evo Case, Rig #2 Asus P5W DH Deluxe Mobo, Intel C2D E6600 CPU @ 3.6ghz, 2gb Corsair XMS2 DDR2 800 Ram @ 4-4-4-12-2t, Zalman CNPS9500LED HSF, Sapphire Radeon X850XT PE GPU, Corsair 620HX P/S, Cooler Master Mystique Case, Viewsonic 20.1" Widescreen Digital LCD Monitor, Klipsch Promedia Ultra 5.1 THX Desktop Speakers, http://valid.x86-secret.com/show_oc.php?id=348351 http://valid.x86-secret.com/show_oc.php?id=236435This message has been edited since posting. Last time this message was edited on 3. April 2008 @ 01:35
|
AfterDawn Addict
4 product reviews
|
2. April 2008 @ 22:56 |
Link to this message
|
|
i was thinking the samething mort...lol
id say you will be able to hit 4.0ghz pretty easy with everything you have for that setup. i hope that E3110 works well for ya. from what iveread about it. it OC's pretty good.
EDIT:
UPS blows.
Package Progress
Location Date Local Time Description
BALDWIN PARK,
CA, US 04/02/2008 7:01 A.M. OUT FOR DELIVERY
BALDWIN PARK,
CA, US 04/01/2008 11:24 P.M. ARRIVAL SCAN
HODGKINS,
IL, US 03/28/2008 2:21 P.M. DEPARTURE SCAN
SHARONVILLE,
OH, US 03/27/2008 7:29 P.M. ORIGIN SCAN
US 03/28/2008 11:38 A.M. BILLING INFORMATION RECEIVED
either they havent delivered it yet or they havent updated there entry's????
This message has been edited since posting. Last time this message was edited on 2. April 2008 @ 23:00
|
AfterDawn Addict
|
2. April 2008 @ 23:14 |
Link to this message
|
Mort I'm getting the same mobo, cpu(maybe the E8400 instead of the E3110) memory/ram (getting 4 gigs though) and HDD as you. already have a good videocard (NVIDIA GeForce 7950 GX2,1 GB of GDDR3 Memory) and 3 optical drives plus the Zalman CNPS-9500 with the Antec 900 case
think we will need a cooler for the mobo?
keep us posted on how it turns out,I'm a few weeks out from getting everything together
Antec 1200 Full-Tower Case/Thermaltake 750-Watt PS/ASUS SABERTOOTH Z77 Mobo/Western Digital Black WD500 500GB 7200 RPM 64MB Cache/NVIDIA GeForce 8800GTX 384-bit GDDR3 PCI Express Video Card/CORSAIR DOMINATOR PLATINUM 16GB DDR3 /Intel Core i7-3770K Ivy Bridge 3.5GHz (3.9GHz Turbo)/CORSAIR Hydro High Performance Liquid CPU Cooler/3-Asus DRW-24B1ST Sata Drives/Samsung 2493HM 24" LCD Monitior 1920x1200 resolution,5ms respone time/OS Windows 10 Pro SP1 64-bit
|
AfterDawn Addict
6 product reviews
|
2. April 2008 @ 23:40 |
Link to this message
|
ZoSoIV,
Quote:
think we will need a cooler for the mobo?
I don't think so. lot of copper heatsink there already. I'm gonna pull the hs's off 1st thing and reseat them with AS5. I'll keep ya posted on the performance, OCability and mobo temps .
Rig #1 Asus Rampage Formula Mobo, Intel Core2Quad Q9450 CPU @ 3.55ghz, 2gb Corsair DDR2 1066 Dominator Ram @ 5-5-5-15, TR Ultra 120 Extreme w/ Scythe 9 blade 110 cfm 120mm Fan HSF, HIS Radeon 512mb HD3850 IceQ TurboX GPU, Corsair 620HX P/S, CM Stacker 830 Evo Case, Rig #2 Asus P5W DH Deluxe Mobo, Intel C2D E6600 CPU @ 3.6ghz, 2gb Corsair XMS2 DDR2 800 Ram @ 4-4-4-12-2t, Zalman CNPS9500LED HSF, Sapphire Radeon X850XT PE GPU, Corsair 620HX P/S, Cooler Master Mystique Case, Viewsonic 20.1" Widescreen Digital LCD Monitor, Klipsch Promedia Ultra 5.1 THX Desktop Speakers, http://valid.x86-secret.com/show_oc.php?id=348351 http://valid.x86-secret.com/show_oc.php?id=236435This message has been edited since posting. Last time this message was edited on 2. April 2008 @ 23:45
|
AfterDawn Addict
|
2. April 2008 @ 23:46 |
Link to this message
|
will be in touch though PMs Mort as you get up and running. As i said I'm about 2 or 3 weeks behind you doing the same build pretty much
Antec 1200 Full-Tower Case/Thermaltake 750-Watt PS/ASUS SABERTOOTH Z77 Mobo/Western Digital Black WD500 500GB 7200 RPM 64MB Cache/NVIDIA GeForce 8800GTX 384-bit GDDR3 PCI Express Video Card/CORSAIR DOMINATOR PLATINUM 16GB DDR3 /Intel Core i7-3770K Ivy Bridge 3.5GHz (3.9GHz Turbo)/CORSAIR Hydro High Performance Liquid CPU Cooler/3-Asus DRW-24B1ST Sata Drives/Samsung 2493HM 24" LCD Monitior 1920x1200 resolution,5ms respone time/OS Windows 10 Pro SP1 64-bit
|
AfterDawn Addict
6 product reviews
|
2. April 2008 @ 23:50 |
Link to this message
|
what psu are you going with? I'll be curious to see how much better the TR ultra 120 extreme cools compared to the zalman cnps 9500. I don't mean that in a bad way. I have a 9500 on this pc.
Rig #1 Asus Rampage Formula Mobo, Intel Core2Quad Q9450 CPU @ 3.55ghz, 2gb Corsair DDR2 1066 Dominator Ram @ 5-5-5-15, TR Ultra 120 Extreme w/ Scythe 9 blade 110 cfm 120mm Fan HSF, HIS Radeon 512mb HD3850 IceQ TurboX GPU, Corsair 620HX P/S, CM Stacker 830 Evo Case, Rig #2 Asus P5W DH Deluxe Mobo, Intel C2D E6600 CPU @ 3.6ghz, 2gb Corsair XMS2 DDR2 800 Ram @ 4-4-4-12-2t, Zalman CNPS9500LED HSF, Sapphire Radeon X850XT PE GPU, Corsair 620HX P/S, Cooler Master Mystique Case, Viewsonic 20.1" Widescreen Digital LCD Monitor, Klipsch Promedia Ultra 5.1 THX Desktop Speakers, http://valid.x86-secret.com/show_oc.php?id=348351 http://valid.x86-secret.com/show_oc.php?id=236435This message has been edited since posting. Last time this message was edited on 2. April 2008 @ 23:51
|
AfterDawn Addict
|
3. April 2008 @ 00:01 |
Link to this message
|
I have the Thermaltake 750-Watt PS, I may good with the Zalman 9700 instead if it will help.
do you thing the TR ultra 120 is better than the Zalman ?
Antec 1200 Full-Tower Case/Thermaltake 750-Watt PS/ASUS SABERTOOTH Z77 Mobo/Western Digital Black WD500 500GB 7200 RPM 64MB Cache/NVIDIA GeForce 8800GTX 384-bit GDDR3 PCI Express Video Card/CORSAIR DOMINATOR PLATINUM 16GB DDR3 /Intel Core i7-3770K Ivy Bridge 3.5GHz (3.9GHz Turbo)/CORSAIR Hydro High Performance Liquid CPU Cooler/3-Asus DRW-24B1ST Sata Drives/Samsung 2493HM 24" LCD Monitior 1920x1200 resolution,5ms respone time/OS Windows 10 Pro SP1 64-bit
This message has been edited since posting. Last time this message was edited on 3. April 2008 @ 00:02
|
AfterDawn Addict
2 product reviews
|
3. April 2008 @ 00:22 |
Link to this message
|
|
I believe the TR Ultra 120 Extreme is the best air cooler you can buy.
|
AfterDawn Addict
|
3. April 2008 @ 00:27 |
Link to this message
|
cincyrob,
Quote:
what would you say is a good bitrate on a 7.8gb movie?
I missed this the other day. It's not so much the size of the movie but how many frames it contains that determines how long DVDRB takes. Transformers is a DVD with a lot of frames and even with it being just the movie, it's about 7.3+GB. Takes about 50 minutes on mine. Anything with a lot of special video effects will take longer as there's more frames. Compression is about 52%!
Best Regards,
Russ
GigaByte 990FXA-UD5 - AMD FX-8320 @4.0GHz @1.312v - Corsair H-60 liquid CPU Cooler - 4x4 GB GSkill RipJaws DDR3/1866 Cas8, 8-9-9-24 - Corsair 400-R Case - OCZ FATAL1TY 550 watt Modular PSU - Intel 330 120GB SATA III SSD - WD Black 500GB SATA III - WD black 1 TB Sata III - WD Black 500GB SATA II - 2 Asus DRW-24B1ST DVD-Burner - Sony 420W 5.1 PL-II Suround Sound - GigaByte GTX550/1GB 970 Mhz Video - Asus VE247H 23.6" HDMI 1080p Monitor
|
AfterDawn Addict
6 product reviews
|
3. April 2008 @ 00:47 |
Link to this message
|
ZoSoIV,
here are some graphs and charts from anandtech comparing different cpu hsf's. http://www.anandtech.com/showdoc.aspx?i=2943&p=1 according to them the ultra 120 extreme is much better than either of the zalmans. it's supposedly one of the best if not the best single heat exchanger cpu heatsinks. judge for yourself.
Rig #1 Asus Rampage Formula Mobo, Intel Core2Quad Q9450 CPU @ 3.55ghz, 2gb Corsair DDR2 1066 Dominator Ram @ 5-5-5-15, TR Ultra 120 Extreme w/ Scythe 9 blade 110 cfm 120mm Fan HSF, HIS Radeon 512mb HD3850 IceQ TurboX GPU, Corsair 620HX P/S, CM Stacker 830 Evo Case, Rig #2 Asus P5W DH Deluxe Mobo, Intel C2D E6600 CPU @ 3.6ghz, 2gb Corsair XMS2 DDR2 800 Ram @ 4-4-4-12-2t, Zalman CNPS9500LED HSF, Sapphire Radeon X850XT PE GPU, Corsair 620HX P/S, Cooler Master Mystique Case, Viewsonic 20.1" Widescreen Digital LCD Monitor, Klipsch Promedia Ultra 5.1 THX Desktop Speakers, http://valid.x86-secret.com/show_oc.php?id=348351 http://valid.x86-secret.com/show_oc.php?id=236435 |
|
Advertisement
|
|
|
AfterDawn Addict
|
3. April 2008 @ 01:16 |
Link to this message
|
looks like I'm getting a new CPU cooler to then lol
newegg is out of stock at the moment
and will it fit in my Antec 900 ok?
Antec 1200 Full-Tower Case/Thermaltake 750-Watt PS/ASUS SABERTOOTH Z77 Mobo/Western Digital Black WD500 500GB 7200 RPM 64MB Cache/NVIDIA GeForce 8800GTX 384-bit GDDR3 PCI Express Video Card/CORSAIR DOMINATOR PLATINUM 16GB DDR3 /Intel Core i7-3770K Ivy Bridge 3.5GHz (3.9GHz Turbo)/CORSAIR Hydro High Performance Liquid CPU Cooler/3-Asus DRW-24B1ST Sata Drives/Samsung 2493HM 24" LCD Monitior 1920x1200 resolution,5ms respone time/OS Windows 10 Pro SP1 64-bit
|
|
