I/O error on DVD Decrypter

Advertise at AfterDawn.com

Link to us!

Private messages

Compose a private message

List of all updated threads

Threads without replies

Search messages

Thursday 30.4.2026 / 18:39

Search AfterDawn Forums:

afterdawn.com > forums > consoles > ps2 - dvd backup discussion > i/o error on dvd decrypter

Browse by topic

Forums

Start a new thread

I/O error on DVD Decrypter

Jump to:

Posted

Message

BKnight2

Newbie

28. March 2006 @ 06:06

Link to this message

Hi everyone.

I've been searching for almost 3 days and I still haven't found the reason for this error to occur.
I'll try to explain the best I can.

I've been using DVD Decrypter for quite a while now and though I had some problems (I use TDK x4 dvd's and they only worked if I made a test burn before the actual burn, and even then the speed would just go past what I selected. But they still worked on my ps2) about a week ago it just stoped working and I can't burn. It gives me this I/O error and stops the burn during the leadIn.

I saw someone saying that it was a good idea to try a different media brand so I bought some Sony 1x-16x but the error is the same.

Here is the log:
I 16:36:37 DVD Decrypter Version 3.5.4.0 started!
I 16:36:37 Microsoft Windows XP Professional (5.1, Build 2600)
W 16:36:37 Drive F:\ (FAT32) does not support single files > 4 GB
I 16:36:37 Initialising SPTI...
I 16:36:37 Searching for SCSI / ATAPI devices...
I 16:36:37 Found 2 DVD-ROMs and 1 DVD±RW!
I 16:37:06 Operation Started!
I 16:37:06 Source File: C:\André\e-shftnw.iso
I 16:37:06 Source File Sectors: 2.078.800 (MODE1/2048)
I 16:37:06 Source File Size: 4.257.382.400 bytes
I 16:37:06 Source File Application Identifier: PLAYSTATION
I 16:37:06 Source File Implementation Identifier: DVD-ROM GENERATOR
I 16:37:06 Destination Device: [1:0:0] BENQ DVD DD DW1620 B7W9 (D:) (ATA)
I 16:37:06 Destination Media Type: DVD-R (Disc ID: SONY16D1) (Speeds: 2,4x; 4x; 8x; 12x; 16x)
I 16:37:06 Destination Media Sectors: 2.298.496
I 16:37:06 Write Mode: DVD
I 16:37:06 Write Type: SAO
I 16:37:06 Write Speed: 2,4x
I 16:37:06 Link Size: Auto
I 16:37:06 Test Mode: No
I 16:37:06 BURN-Proof: Enabled
I 16:37:06 Filling Buffer...
I 16:37:07 Writing LeadIn...
W 16:37:42 Failed to Write Sectors 0 - 31 - Write Error
W 16:37:42 Retrying (1 of 20)...
W 16:37:42 Retry Failed - Invalid Address For Write
W 16:37:42 Retrying (2 of 20)...
W 16:37:42 Retry Failed - Invalid Address For Write
W 16:37:42 Retrying (3 of 20)...
W 16:37:42 Retry Failed - Invalid Address For Write
W 16:37:42 Retrying (4 of 20)...
W 16:37:42 Retry Failed - Invalid Address For Write
W 16:37:42 Retrying (5 of 20)...
W 16:37:42 Retry Failed - Invalid Address For Write
W 16:37:42 Retrying (6 of 20)...
W 16:37:42 Retry Failed - Invalid Address For Write
W 16:37:42 Retrying (7 of 20)...
W 16:37:42 Retry Failed - Invalid Address For Write
W 16:37:42 Retrying (8 of 20)...
W 16:37:42 Retry Failed - Invalid Address For Write
W 16:37:42 Retrying (9 of 20)...
W 16:37:42 Retry Failed - Invalid Address For Write
W 16:37:42 Retrying (10 of 20)...
W 16:37:42 Retry Failed - Invalid Address For Write
W 16:37:42 Retrying (11 of 20)...
W 16:37:42 Retry Failed - Invalid Address For Write
W 16:37:42 Retrying (12 of 20)...
W 16:37:42 Retry Failed - Invalid Address For Write
W 16:37:42 Retrying (13 of 20)...
W 16:37:42 Retry Failed - Invalid Address For Write
W 16:37:42 Retrying (14 of 20)...
W 16:37:42 Retry Failed - Invalid Address For Write
W 16:37:42 Retrying (15 of 20)...
W 16:37:42 Retry Failed - Invalid Address For Write
W 16:37:42 Retrying (16 of 20)...
W 16:37:42 Retry Failed - Invalid Address For Write
W 16:37:42 Retrying (17 of 20)...
W 16:37:42 Retry Failed - Invalid Address For Write
W 16:37:42 Retrying (18 of 20)...
W 16:37:42 Retry Failed - Invalid Address For Write
W 16:37:42 Retrying (19 of 20)...
W 16:37:42 Retry Failed - Invalid Address For Write
W 16:37:42 Retrying (20 of 20)...
W 16:37:42 Retry Failed! - Invalid Address For Write
E 16:37:59 Failed to Write Sectors 0 - 31 - Write Error
I 16:37:59 Synchronising Cache...
E 16:37:59 Failed to Write Image!
E 16:37:59 Operation Failed! - Duration: 00:00:53
I 16:37:59 Average Write Rate: N/A - Maximum Write Rate: N/A

Here is an image of the error:

Drive: Benq DD DW1620

I'm sorry if someone has allready asked for this but I really don't know what to do.

Thanks in advance.

André

[ + quote]

ps2hacka

Suspended due to non-functional email address

28. March 2006 @ 06:26

Link to this message

hello

first off,its not the firmware as B7W9 is the latest

it still might be the disk's...:)

try another app to burn,this time use Nero if you have it,and post the log if it fails (more details)

[ + quote]

BKnight2

Newbie

28. March 2006 @ 06:37

Link to this message

I used nero and it didn't work as well.

Log:
André
..

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 24-03-2006 22:06:46
ahead WinASPI: File 'C:\Programas\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26-10-2004 17:21:30
Nero Version: 6.6.0.6
Recorder: <BENQ DVD DD DW1620> Version: B7W9 - HA 1 TA 0 - 6.6.0.6
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SONY DVD-ROM DDU1622 >Version: AS72 - HA 1 TA 1 - 6.6.0.6
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST340014A atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 90648D3 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : BENQ DVD DD DW1620 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SONY DVD-ROM DDU1622 atapi Port 1 ID 1 DMA: On
CdRomPeripheral : JB7502X XDU431U 1.0 dtscsi Port 3 ID 0 DMA: Off

=== CDRom-Device-Map ===
BENQ DVD DD DW1620 D: CDRom0
SONY DVD-ROM DDU1622 E: CDRom1
JB7502X XDU431U G: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523500kB)
Free physical memory: 124MB (127284kB)
Memory in use : 75 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

28.3.2006
Burn DVD Image
17:32:30 #1 Text 0 File Reader.cpp, Line 127
Reader running

17:32:30 #2 Text 0 File Writer.cpp, Line 122
Writer BENQ DVD DD DW1620 running

17:32:30 #3 Text 0 File Burncd.cpp, Line 3155
Turn on Disc-at-once, using DVD media

17:33:20 #4 Text 0 File DlgWaitCD.cpp, Line 257
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2078949 (461:59.24, 4060MB)

17:33:20 #5 Text 0 File DlgWaitCD.cpp, Line 269
Write in overburning mode: NO (enabled: CD DVD)

17:33:20 #6 Text 0 File DlgWaitCD.cpp, Line 2311
Recorder: BENQ DVD DD DW1620, Media type: DVD-R
Disc Manufacturer: SONY16 - D1
Disc Application Code: 64, Disc Physical Code: 193

17:33:20 #7 Text 0 File DlgWaitCD.cpp, Line 431
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Disc not empty. Insert empty disc.
(Medium in drive: DVD-R. Medium required by compilation: DVD+R/RW; DVD-R/RW; DVD+R9 Double Layer.)

17:33:20 #8 Text 0 File ThreadedTransferInterface.cpp, Line 829
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2078950 (2078950) = #2078950/461:59.25
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2078950 blocks [BENQ DVD DD DW1620]
--------------------------------------------------------------

17:33:20 #9 Text 0 File ThreadedTransferInterface.cpp, Line 1042
Prepare recorder [BENQ DVD DD DW1620] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4257689600, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2078950 | lead-out | 1 | 0x41 | 0x00

17:33:20 #10 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

17:33:20 #11 Text 0 File Burncd.cpp, Line 4042
Cache writing successful.

17:33:20 #12 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

17:33:20 #13 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2.4x (3.324 KB/s)

17:33:20 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2604
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

17:33:20 #15 Text 0 File DVDR.cpp, Line 2300
Recording mode: Sequential Recording Mode for Multisession

17:33:20 #16 Text 0 File Mmc.cpp, Line 21079
Set BUFE: Seamless Link -> ON

17:33:20 #17 Text 0 File DVDR.cpp, Line 2441
Start write address at LBA 0
DVD high compatibility mode: Yes

17:33:20 #18 Text 0 File Cdrdrv.cpp, Line 8332
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

17:33:20 #19 Text 0 File DVDR.cpp, Line 5619
Drive: BENQ DVD DD DW1620
Book Type request [gen]: DVD-ROMDrive doesn't support changing Book Type for DVD-R

17:33:20 #20 CDR -1211 File DVDR.cpp, Line 4796
Book Type set to: DVD-ROM

17:33:54 #21 SCSI -1135 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04150000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x0C 0x00

17:33:54 #22 CDR -1135 File Writer.cpp, Line 311
Write error

17:33:54 #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

17:33:54 #24 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

17:33:54 #25 Text 0 File DVDR.cpp, Line 2682
EndDAO: Last written address was -1

17:33:54 #26 Phase 133 File dlgbrnst.cpp, Line 1832
Writing short lead-out

17:34:24 #27 SCSI -1176 File Cdrdrv.cpp, Line 1178
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x72
Sense Qual: 0x01
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x72 0x01

17:34:52 #28 SCSI -1176 File Cdrdrv.cpp, Line 1178
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x72
Sense Qual: 0x01
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x72 0x01

17:35:04 #29 Text 0 File DVDR.cpp, Line 5619
Drive: BENQ DVD DD DW1620
Book Type request [gen]: DVD-ROMDrive doesn't support changing Book Type for DVD-R

17:35:04 #30 CDR -1176 File WriterStatus.cpp, Line 167
Session fixation error
BENQ DVD DD DW1620\H1 T0

17:35:04 #31 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once

17:35:04 #32 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2.4x (3.324 KB/s)

Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 28-05-2005 15:09:11 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.0 (XPClient.010817-1148), size=86656 bytes, created 20-11-2001 13:00:00 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Thanks for you answer.

[ + quote]

This message has been edited since posting. Last time this message was edited on 28. March 2006 @ 07:35

ps2hacka

Suspended due to non-functional email address

28. March 2006 @ 07:33

Link to this message

hello

pls remove the nero serial number from the log!!!

i am pretty sure it doesnt like the disk,

Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

there should be numbers here,

also,can you run the nero info tool readout,and post it here

also,Physical memory : 511MB (523500kB)
Free physical memory: 124MB (127284kB)
Memory in use : 75 %

you are closing down everything before burning yes?,you havent much memory free

and finally,you cannot change the booktype on a dvd-r type disk!!!

cheers!!

[ + quote]

This message has been edited since posting. Last time this message was edited on 28. March 2006 @ 07:37

BKnight2

Newbie

28. March 2006 @ 07:49

Link to this message

Is this what you asked for?

It gives me an error when I click the save button so I can't show you more.

About the memory, I had some other things running but when I burn I usually exit everything so I don't think that's the problem.
I used booktype because I tried a DVD+R the other day and now i can't remember where the option is :p could you tell me where to change this pls.

Well my drive sure is picky... doesn't like TDK and Sony

[ + quote]

ps2hacka

Suspended due to non-functional email address

28. March 2006 @ 08:58

Link to this message

hello,

this shows you how to change the booktype setting

http://www.k-probe.com/bitsetting-booktype-faq.php

if you can get your hands on another disk,then try that

if this fails,post this log in the Nero section,then someone with more experience with these logs might beable to help you more

btw,on that picture you shown me,click on the ASPI tab,tell me if the aspi layers are installed and working correctly

[ + quote]

BKnight2

Newbie

28. March 2006 @ 09:13

Link to this message

Hi

Yes, the aspi layers are working (green bar).

I'll follow your advice and try another media.
And I'll also post this log on the Nero section.

Thank you for your time.
André

[ + quote]

Deadbatch

Newbie

29. March 2006 @ 08:46

Link to this message

I am having the same problem. Using decrypter/shrink/anydvd. Made many burns w/no problems. Tried to back up Harry Potter goblet and got DVD Decrypter I/O error, Device [1:0:0] Matshita UJ-81D 1.03 (e) (ata), scsistatus: oxo2, Interpretation:Check condition. I get this error when using Ridata +r dl. I don't get the error when using Staples single layer and shrink

[ + quote]

Start a new thread


		User name	Password

		Not registered yet? Register here. Lost your password? Click here.