|
|
|
What kinda processor is the fastest for DVD-RB
|
|
AfterDawn Addict
1 product review
|
11. December 2007 @ 17:20 |
Link to this message
|
|
Creaky
Nice system. There are a couple of variables that would be helpful if you could run them.
The selected movie and ones choices makes an enormous difference in the outcome such as removing the extras and unwanted sound tracks.
If possible could you encode Lord of The Rings II using two pass?
A couple of minor concerns: Check your hard disk for DMA settings?
Your prepare time of 5 minutes is a little long and should be 3 minutes tops and 2 minutes is better. Also the rebuild of 22 minutes is quite long, it should be around 11 to 12 minutes. If you have it set to two pass then your encode speeds are good. The other two areas (prepare and rebuild) are often reflective of a slow down with your hard drive.
Again nice system, I've been dying to do a new build for some time but my other hobbies keep chewing up my dollars. I envy every new build I hear about and thus I am forced to live vicariously through others.
" Please Read!!! Post your questions only in This Thread or they will go unanswered:
Help with development of BD RB: Donations at: http://www.jdobbs.com/. |
|
Advertisement
|
|
|
|
|
mimesis
Newbie
|
11. December 2007 @ 18:47 |
Link to this message
|
God i can't wait for all of my hardware to finally arrive. My computer has slowly but surely is dying. And probably has much to do with burning movies on a bad setup.
However, i just ordered the AMD Athlon 64 X2 6400+ Black Edition (3.2ghz), 2gb Corsair XMS2 ram, ASUS M2N-e SLI motherboard, Seagate 320gb SATA 16mb cache, BFG 8800gt.
What should i get for run times on a 2 pass encode now?
----------------------------------
HARDWARE
----------------------------------
AMD Athlon 64 3200+ (stock aka 2.0ghz)
1 Gig Kingston PC 3200 RAM
250 Gig Maxtor Diamond Max 10
XFX 6600GT
--------------------------------
COMING SOON!
AMD Athlon 64 X2 6400+ Black Edition
ASUS M2N-e SLI
Corsair XM2 2gigs
Western Digital Caviar 250gb 16mb cache
Western Digital Raptor 150gb 32mb cache
MSI HD2600XT 512mb OC Edition
OCZ GameXStream 700w PSU
---------------------------------
SOFTWARE
---------------------------------
Windows XP Pro (SP2)
DVD-RB Pro 1.21
CCE SP/2
ProCoder
DVDFab Decrypter PRO
|
Moderator
|
11. December 2007 @ 18:53 |
Link to this message
|
cheers Soph.. i'll try to have a go at LOTR tomorrow night, though i have a huge backlog of movies to attack first :)
Bear in mind i haven't tweaked a thing on this rig yet, just wanted to do a sample DVD-RB run to put it thru it's paces and see how stable it was; as to DMA that'll be as Rebuilder was dragging it's data off a USB2.0 notebook drive, and i was running ConvertXToDVD at the same time, also dragging it's data off the same notebook drive. I do have the default 2passes set in Rebuilder.
I did however run an encode of Transformers afterwards, it's data was already on the SATA c: drive and the figures concur with those in your post -
[21:34:15] Phase I, PREPARATION started.
- Source: TRANSFORMERS PAL - REMOVE USELE
- VTS_01: 3,337,149 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 206,444 frames.
-- Building .AVS and .ECL files
- Reduction Level for DVD-5: 64.2%
- Overall Bitrate : 3,910Kbs
- Space for Video : 3,941,424KB
- HIGH/LOW/TYPICAL Bitrates: 4,612/1,638/3,910 Kbs
[21:36:25] Phase I, PREPARATION completed in 2 minutes.
[21:36:25] Phase II ENCODING started
- Creating M2V for VTS_01 segment 0
- Creating M2V for VTS_01 segment 1
- Creating M2V for VTS_01 segment 2
- Creating M2V for VTS_01 segment 3
- Creating M2V for VTS_01 segment 4
- Creating M2V for VTS_01 segment 5
- Creating M2V for VTS_01 segment 6
- Creating M2V for VTS_01 segment 7
- Creating M2V for VTS_01 segment 8
- Creating M2V for VTS_01 segment 9
- Creating M2V for VTS_01 segment 10
- Creating M2V for VTS_01 segment 11
- Creating M2V for VTS_01 segment 12
- Creating M2V for VTS_01 segment 13
- Creating M2V for VTS_01 segment 14
- Creating M2V for VTS_01 segment 15
- Creating M2V for VTS_01 segment 16
- Creating M2V for VTS_01 segment 17
- Creating M2V for VTS_01 segment 18
- Creating M2V for VTS_01 segment 19
- Creating M2V for VTS_01 segment 20
- Creating M2V for VTS_01 segment 21
- Creating M2V for VTS_01 segment 22
- Creating M2V for VTS_01 segment 23
- Creating M2V for VTS_01 segment 24
- Creating M2V for VTS_01 segment 25
- Creating M2V for VTS_01 segment 26
- Creating M2V for VTS_01 segment 27
- Creating M2V for VTS_01 segment 28
- Creating M2V for VTS_01 segment 29
- Creating M2V for VTS_01 segment 30
- Creating M2V for VTS_01 segment 31
- Creating M2V for VTS_01 segment 32
- Creating M2V for VTS_01 segment 33
- Extracting STILLS for VTS_01 segment 34
[22:09:50] Phase II ENCODING completed in 33 minutes.
[22:09:50] Phase III, REBUILD started.
- Copying IFO, BUP, and unaltered files...
- Processing VTS_01
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Rebuilding seg 1 VOBID 1 CELLID 2
- Rebuilding seg 2 VOBID 1 CELLID 3
- Rebuilding seg 3 VOBID 1 CELLID 4
- Rebuilding seg 4 VOBID 1 CELLID 5
- Rebuilding seg 5 VOBID 1 CELLID 6
- Rebuilding seg 6 VOBID 1 CELLID 7
- Rebuilding seg 7 VOBID 1 CELLID 8
- Rebuilding seg 8 VOBID 1 CELLID 9
- Rebuilding seg 9 VOBID 1 CELLID 10
- Rebuilding seg 10 VOBID 1 CELLID 11
- Rebuilding seg 11 VOBID 1 CELLID 12
- Rebuilding seg 12 VOBID 1 CELLID 13
- Rebuilding seg 13 VOBID 1 CELLID 14
- Rebuilding seg 14 VOBID 1 CELLID 15
- Rebuilding seg 15 VOBID 1 CELLID 16
- Rebuilding seg 16 VOBID 1 CELLID 17
- Rebuilding seg 17 VOBID 1 CELLID 18
- Rebuilding seg 18 VOBID 1 CELLID 19
- Rebuilding seg 19 VOBID 1 CELLID 20
- Updating NAVPACKS for VOBID_01
- Rebuilding seg 20 VOBID 2 CELLID 1
- Rebuilding seg 21 VOBID 2 CELLID 2
- Rebuilding seg 22 VOBID 2 CELLID 3
- Rebuilding seg 23 VOBID 2 CELLID 4
- Rebuilding seg 24 VOBID 2 CELLID 5
- Rebuilding seg 25 VOBID 2 CELLID 6
- Rebuilding seg 26 VOBID 2 CELLID 7
- Rebuilding seg 27 VOBID 2 CELLID 8
- Rebuilding seg 28 VOBID 2 CELLID 9
- Rebuilding seg 29 VOBID 2 CELLID 10
- Rebuilding seg 30 VOBID 2 CELLID 11
- Rebuilding seg 31 VOBID 2 CELLID 12
- Rebuilding seg 32 VOBID 2 CELLID 13
- Rebuilding seg 33 VOBID 2 CELLID 14
- Updating NAVPACKS for VOBID_02
- Rebuilding seg 34 VOBID 3 CELLID 1
- Updating NAVPACKS for VOBID_03
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_01_0.IFO
- Updating TMAP table...
- Correcting VTS Sectors...
[22:21:00] Phase III, REBUILD completed in 12 minutes.
Done.
[22:21:00] PREPARE/ENCODE/REBUILD completed in 47 min.
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
AfterDawn Addict
1 product review
|
11. December 2007 @ 19:27 |
Link to this message
|
mimesis
I have a couple of AMD systems as well and although they won't encode as fast as creaky's Intel processor, they are still impressive rigs. You should see some pretty decent encode speeds. In the prepare and rebuild phases I've found that AMD processors tend to be a bit faster no doubt because of their superior memory handling and FSB bandwidth. You should see about 2 minutes on prepare and about 9 to 12 minutes on rebuild. On encode an core 2 processors is going to win by about 15 to 20 minutes or more. Still you will get some impressive encode speeds because that is still a very fine processor. I would be interested in seeing the results of it running LOR II as well. I seen a lot of results running that DVD and there is damn little to remove so everyone starts on the same foot.
Good luck with the build.
" Please Read!!! Post your questions only in This Thread or they will go unanswered:
Help with development of BD RB: Donations at: http://www.jdobbs.com/. This message has been edited since posting. Last time this message was edited on 11. December 2007 @ 19:28
|
Moderator
|
14. December 2007 @ 15:30 |
Link to this message
|
Originally posted by Sophocles:
If possible could you encode Lord of The Rings II using two pass?
quick reply for now as kids need feeding...
[18:35:51] One Click encoding activated...
-----------------
[18:35:51] Phase I, PREPARATION started.
- Source: LOTR TWO TOWERS D1
- VTS_01: 3,539,507 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 258,101 frames.
-- Building .AVS and .ECL files
- Reduction Level for DVD-5: 59.7%
- Overall Bitrate : 3,060Kbs
- Space for Video : 3,856,550KB
- HIGH/LOW/TYPICAL Bitrates: 4,089/1,229/3,060 Kbs
[18:40:09] Phase I, PREPARATION completed in 5 minutes.
[18:40:09] Phase II ENCODING started
- Creating M2V for VTS_01 segment 0
- Creating M2V for VTS_01 segment 1
- Creating M2V for VTS_01 segment 2
- Creating M2V for VTS_01 segment 3
- Creating M2V for VTS_01 segment 4
- Creating M2V for VTS_01 segment 5
- Creating M2V for VTS_01 segment 6
- Creating M2V for VTS_01 segment 7
- Creating M2V for VTS_01 segment 8
- Creating M2V for VTS_01 segment 9
- Creating M2V for VTS_01 segment 10
- Creating M2V for VTS_01 segment 11
- Creating M2V for VTS_01 segment 12
- Creating M2V for VTS_01 segment 13
- Creating M2V for VTS_01 segment 14
- Creating M2V for VTS_01 segment 15
- Creating M2V for VTS_01 segment 16
- Creating M2V for VTS_01 segment 17
- Creating M2V for VTS_01 segment 18
- Creating M2V for VTS_01 segment 19
- Creating M2V for VTS_01 segment 20
- Creating M2V for VTS_01 segment 21
- Creating M2V for VTS_01 segment 22
- Creating M2V for VTS_01 segment 23
- Creating M2V for VTS_01 segment 24
- Creating M2V for VTS_01 segment 25
- Creating M2V for VTS_01 segment 26
- Creating M2V for VTS_01 segment 27
- Creating M2V for VTS_01 segment 28
- Creating M2V for VTS_01 segment 29
- Creating M2V for VTS_01 segment 30
- Creating M2V for VTS_01 segment 31
- Creating M2V for VTS_01 segment 32
- Creating M2V for VTS_01 segment 33
- Creating M2V for VTS_01 segment 34
- Creating M2V for VTS_01 segment 35
- Creating M2V for VTS_01 segment 36
- Creating M2V for VTS_01 segment 37
- Creating M2V for VTS_01 segment 38
- Creating M2V for VTS_01 segment 39
- Creating M2V for VTS_01 segment 40
- Creating M2V for VTS_01 segment 41
- Creating M2V for VTS_01 segment 42
- Creating M2V for VTS_01 segment 43
- Creating M2V for VTS_01 segment 44
- Creating M2V for VTS_01 segment 45
- Creating M2V for VTS_01 segment 46
- Creating M2V for VTS_01 segment 47
- Creating M2V for VTS_01 segment 48
- Creating M2V for VTS_01 segment 49
- Creating M2V for VTS_01 segment 50
- Creating M2V for VTS_01 segment 51
- Creating M2V for VTS_01 segment 52
- Creating M2V for VTS_01 segment 53
- Creating M2V for VTS_01 segment 54
- Extracting STILLS for VTS_01 segment 55
[19:20:53] Phase II ENCODING completed in 40 minutes.
[19:20:53] Phase III, REBUILD started.
- Copying IFO, BUP, and unaltered files...
- Processing VTS_01
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Rebuilding seg 1 VOBID 1 CELLID 2
- Rebuilding seg 2 VOBID 1 CELLID 3
- Rebuilding seg 3 VOBID 1 CELLID 4
- Rebuilding seg 4 VOBID 1 CELLID 5
- Rebuilding seg 5 VOBID 1 CELLID 6
- Rebuilding seg 6 VOBID 1 CELLID 7
- Rebuilding seg 7 VOBID 1 CELLID 8
- Rebuilding seg 8 VOBID 1 CELLID 9
- Rebuilding seg 9 VOBID 1 CELLID 10
- Rebuilding seg 10 VOBID 1 CELLID 11
- Rebuilding seg 11 VOBID 1 CELLID 12
- Rebuilding seg 12 VOBID 1 CELLID 13
- Rebuilding seg 13 VOBID 1 CELLID 14
- Rebuilding seg 14 VOBID 1 CELLID 15
- Rebuilding seg 15 VOBID 1 CELLID 16
- Rebuilding seg 16 VOBID 1 CELLID 17
- Rebuilding seg 17 VOBID 1 CELLID 18
- Rebuilding seg 18 VOBID 1 CELLID 19
- Rebuilding seg 19 VOBID 1 CELLID 20
- Rebuilding seg 20 VOBID 1 CELLID 21
- Rebuilding seg 21 VOBID 1 CELLID 22
- Rebuilding seg 22 VOBID 1 CELLID 23
- Rebuilding seg 23 VOBID 1 CELLID 24
- Rebuilding seg 24 VOBID 1 CELLID 25
- Rebuilding seg 25 VOBID 1 CELLID 26
- Updating NAVPACKS for VOBID_01
- Rebuilding seg 26 VOBID 2 CELLID 1
- Rebuilding seg 27 VOBID 2 CELLID 2
- Rebuilding seg 28 VOBID 2 CELLID 3
- Rebuilding seg 29 VOBID 2 CELLID 4
- Rebuilding seg 30 VOBID 2 CELLID 5
- Updating NAVPACKS for VOBID_02
- Rebuilding seg 31 VOBID 3 CELLID 1
- Rebuilding seg 32 VOBID 3 CELLID 2
- Rebuilding seg 33 VOBID 3 CELLID 3
- Rebuilding seg 34 VOBID 3 CELLID 4
- Rebuilding seg 35 VOBID 3 CELLID 5
- Rebuilding seg 36 VOBID 3 CELLID 6
- Rebuilding seg 37 VOBID 3 CELLID 7
- Rebuilding seg 38 VOBID 3 CELLID 8
- Rebuilding seg 39 VOBID 3 CELLID 9
- Rebuilding seg 40 VOBID 3 CELLID 10
- Rebuilding seg 41 VOBID 3 CELLID 11
- Rebuilding seg 42 VOBID 3 CELLID 12
- Rebuilding seg 43 VOBID 3 CELLID 13
- Rebuilding seg 44 VOBID 3 CELLID 14
- Rebuilding seg 45 VOBID 3 CELLID 15
- Rebuilding seg 46 VOBID 3 CELLID 16
- Rebuilding seg 47 VOBID 3 CELLID 17
- Rebuilding seg 48 VOBID 3 CELLID 18
- Rebuilding seg 49 VOBID 3 CELLID 19
- Rebuilding seg 50 VOBID 3 CELLID 20
- Rebuilding seg 51 VOBID 3 CELLID 21
- Rebuilding seg 52 VOBID 3 CELLID 22
- Rebuilding seg 53 VOBID 3 CELLID 23
- Rebuilding seg 54 VOBID 3 CELLID 24
- Updating NAVPACKS for VOBID_03
- Rebuilding seg 55 VOBID 4 CELLID 1
- Updating NAVPACKS for VOBID_04
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_01_0.IFO
- Updating TMAP table...
- Correcting VTS Sectors...
[19:29:09] Phase III, REBUILD completed in 9 minutes.
Done.
[19:29:09] PREPARE/ENCODE/REBUILD completed in 54 min.
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
AfterDawn Addict
1 product review
|
14. December 2007 @ 16:57 |
Link to this message
|
Creaky
Thanks! That should be a good reference point for anyone to get an idea as to how fast the new Intel's can run. I'm guessing that you're running CCE? If only we could get an encoder that natively runs 4 threads at once to test out your Quad core, now that would be something. Some of the other encoders allow you to run four at once using the Multiple encoder feature, but most of those are usually slower than two threads of CCE. With a little over clocking you should be able to shave off a few more minutes.
" Please Read!!! Post your questions only in This Thread or they will go unanswered:
Help with development of BD RB: Donations at: http://www.jdobbs.com/. |
Moderator
|
14. December 2007 @ 17:22 |
Link to this message
|
No problem, and yup, it's CCE SP2. Just used CCE for Blade Runner The Final Cut from the new Ultimate Collector's Edition, this disc only took 35mins, looking forward to watching it later; anyway, now trying Hank's Encoder on LOTR2 for another test..
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
AfterDawn Addict
1 product review
|
14. December 2007 @ 17:33 |
Link to this message
|
|
I am looking forward to seeing your results. Let us know when you get into a little over clocking because that should shake things up a bit.
" Please Read!!! Post your questions only in This Thread or they will go unanswered:
Help with development of BD RB: Donations at: http://www.jdobbs.com/. |
Moderator
|
14. December 2007 @ 18:09 |
Link to this message
|
It'll be a while before i get around to any overclocking, i'm rarely at home these days long enough to mess with settings..
Hank's Encoder for LOTR2 -
[22:23:00] One Click encoding activated...
-----------------
[22:23:00] Phase I, PREPARATION started.
- Source: LOTR TWO TOWERS D1
- VTS_01: 3,539,507 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 258,101 frames.
-- Building .AVS and .ECL files
- Reduction Level for DVD-5: 59.7%
- Overall Bitrate : 3,060Kbs
- Space for Video : 3,856,550KB
- HIGH/LOW/TYPICAL Bitrates: 4,089/1,229/3,060 Kbs
[22:26:22] Phase I, PREPARATION completed in 3 minutes.
[22:26:22] Phase II ENCODING started
- Creating M2V for VTS_01 segment 0
- Creating M2V for VTS_01 segment 1
- Creating M2V for VTS_01 segment 2
- Creating M2V for VTS_01 segment 3
- Creating M2V for VTS_01 segment 4
- Creating M2V for VTS_01 segment 5
- Creating M2V for VTS_01 segment 6
- Creating M2V for VTS_01 segment 7
- Creating M2V for VTS_01 segment 8
- Creating M2V for VTS_01 segment 9
- Creating M2V for VTS_01 segment 10
- Creating M2V for VTS_01 segment 11
- Creating M2V for VTS_01 segment 12
- Creating M2V for VTS_01 segment 13
- Creating M2V for VTS_01 segment 14
- Creating M2V for VTS_01 segment 15
- Creating M2V for VTS_01 segment 16
- Creating M2V for VTS_01 segment 17
- Creating M2V for VTS_01 segment 18
- Creating M2V for VTS_01 segment 19
- Creating M2V for VTS_01 segment 20
- Creating M2V for VTS_01 segment 21
- Creating M2V for VTS_01 segment 22
- Creating M2V for VTS_01 segment 23
- Creating M2V for VTS_01 segment 24
- Creating M2V for VTS_01 segment 25
- Creating M2V for VTS_01 segment 26
- Creating M2V for VTS_01 segment 27
- Creating M2V for VTS_01 segment 28
- Creating M2V for VTS_01 segment 29
- Creating M2V for VTS_01 segment 30
- Creating M2V for VTS_01 segment 31
- Creating M2V for VTS_01 segment 32
- Creating M2V for VTS_01 segment 33
- Creating M2V for VTS_01 segment 34
- Creating M2V for VTS_01 segment 35
- Creating M2V for VTS_01 segment 36
- Creating M2V for VTS_01 segment 37
- Creating M2V for VTS_01 segment 38
- Creating M2V for VTS_01 segment 39
- Creating M2V for VTS_01 segment 40
- Creating M2V for VTS_01 segment 41
- Creating M2V for VTS_01 segment 42
- Creating M2V for VTS_01 segment 43
- Creating M2V for VTS_01 segment 44
- Creating M2V for VTS_01 segment 45
- Creating M2V for VTS_01 segment 46
- Creating M2V for VTS_01 segment 47
- Creating M2V for VTS_01 segment 48
- Creating M2V for VTS_01 segment 49
- Creating M2V for VTS_01 segment 50
- Creating M2V for VTS_01 segment 51
- Creating M2V for VTS_01 segment 52
- Creating M2V for VTS_01 segment 53
- Creating M2V for VTS_01 segment 54
- Extracting STILLS for VTS_01 segment 55
[22:57:49] Phase II ENCODING completed in 31 minutes.
[22:57:50] Phase III, REBUILD started.
- Copying IFO, BUP, and unaltered files...
- Processing VTS_01
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Rebuilding seg 1 VOBID 1 CELLID 2
- Rebuilding seg 2 VOBID 1 CELLID 3
- Rebuilding seg 3 VOBID 1 CELLID 4
- Rebuilding seg 4 VOBID 1 CELLID 5
- Rebuilding seg 5 VOBID 1 CELLID 6
- Rebuilding seg 6 VOBID 1 CELLID 7
- Rebuilding seg 7 VOBID 1 CELLID 8
- Rebuilding seg 8 VOBID 1 CELLID 9
- Rebuilding seg 9 VOBID 1 CELLID 10
- Rebuilding seg 10 VOBID 1 CELLID 11
- Rebuilding seg 11 VOBID 1 CELLID 12
- Rebuilding seg 12 VOBID 1 CELLID 13
- Rebuilding seg 13 VOBID 1 CELLID 14
- Rebuilding seg 14 VOBID 1 CELLID 15
- Rebuilding seg 15 VOBID 1 CELLID 16
- Rebuilding seg 16 VOBID 1 CELLID 17
- Rebuilding seg 17 VOBID 1 CELLID 18
- Rebuilding seg 18 VOBID 1 CELLID 19
- Rebuilding seg 19 VOBID 1 CELLID 20
- Rebuilding seg 20 VOBID 1 CELLID 21
- Rebuilding seg 21 VOBID 1 CELLID 22
- Rebuilding seg 22 VOBID 1 CELLID 23
- Rebuilding seg 23 VOBID 1 CELLID 24
- Rebuilding seg 24 VOBID 1 CELLID 25
- Rebuilding seg 25 VOBID 1 CELLID 26
- Updating NAVPACKS for VOBID_01
- Rebuilding seg 26 VOBID 2 CELLID 1
- Rebuilding seg 27 VOBID 2 CELLID 2
- Rebuilding seg 28 VOBID 2 CELLID 3
- Rebuilding seg 29 VOBID 2 CELLID 4
- Rebuilding seg 30 VOBID 2 CELLID 5
- Updating NAVPACKS for VOBID_02
- Rebuilding seg 31 VOBID 3 CELLID 1
- Rebuilding seg 32 VOBID 3 CELLID 2
- Rebuilding seg 33 VOBID 3 CELLID 3
- Rebuilding seg 34 VOBID 3 CELLID 4
- Rebuilding seg 35 VOBID 3 CELLID 5
- Rebuilding seg 36 VOBID 3 CELLID 6
- Rebuilding seg 37 VOBID 3 CELLID 7
- Rebuilding seg 38 VOBID 3 CELLID 8
- Rebuilding seg 39 VOBID 3 CELLID 9
- Rebuilding seg 40 VOBID 3 CELLID 10
- Rebuilding seg 41 VOBID 3 CELLID 11
- Rebuilding seg 42 VOBID 3 CELLID 12
- Rebuilding seg 43 VOBID 3 CELLID 13
- Rebuilding seg 44 VOBID 3 CELLID 14
- Rebuilding seg 45 VOBID 3 CELLID 15
- Rebuilding seg 46 VOBID 3 CELLID 16
- Rebuilding seg 47 VOBID 3 CELLID 17
- Rebuilding seg 48 VOBID 3 CELLID 18
- Rebuilding seg 49 VOBID 3 CELLID 19
- Rebuilding seg 50 VOBID 3 CELLID 20
- Rebuilding seg 51 VOBID 3 CELLID 21
- Rebuilding seg 52 VOBID 3 CELLID 22
- Rebuilding seg 53 VOBID 3 CELLID 23
- Rebuilding seg 54 VOBID 3 CELLID 24
- Updating NAVPACKS for VOBID_03
- Rebuilding seg 55 VOBID 4 CELLID 1
- Updating NAVPACKS for VOBID_04
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_01_0.IFO
- Updating TMAP table...
- Correcting VTS Sectors...
[23:06:12] Phase III, REBUILD completed in 9 minutes.
Done.
[23:06:12] PREPARE/ENCODE/REBUILD completed in 43 min.
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
Senior Member
|
14. December 2007 @ 19:29 |
Link to this message
|
My E6400 oc'ed to 3.2 GHz with CCE 2-pass:
Harry Potter and the Order of the Phoenix full-disc
[18:26:10] One Click encoding activated...
-----------------
[18:26:10] Phase I, PREPARATION started.
- DVD-RB v1.26.5
- AVISYNTH 2.5.6.0
- CCE 2.62+ encoder selected.
- Source: HARRY PHOENIX
- VTSM_01: 98,431 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 7,752 frames.
-- Building .AVS and .ECL files
- VTS_01: 3,606,567 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 200,348 frames.
-- Building .AVS and .ECL files
- VTS_02: 131,944 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 13,403 frames.
-- Building .AVS and .ECL files
- Reduction Level for DVD-5: 62.5%
- Overall Bitrate : 4,424/3,539Kbs
- Space for Video : 3,991,172KB
- HIGH/LOW/TYPICAL Bitrates: 8,808/1,906/3,539 Kbs
[18:28:45] Phase I, PREPARATION completed in 2 minutes.
[18:28:45] Phase II ENCODING started
- Creating M2V for VTSM_01 segment 0
- Creating M2V for VTSM_01 segment 1
- Creating M2V for VTSM_01 segment 2
- Creating M2V for VTSM_01 segment 3
- Creating M2V for VTSM_01 segment 4
- Extracting STILLS for VTSM_01 segment 5
- Extracting STILLS for VTSM_01 segment 6
- Extracting STILLS for VTSM_01 segment 7
- Extracting STILLS for VTSM_01 segment 8
- Extracting STILLS for VTSM_01 segment 9
- Extracting STILLS for VTSM_01 segment 10
- Creating M2V for VTSM_01 segment 11
- Extracting STILLS for VTSM_01 segment 12
- Creating M2V for VTSM_01 segment 13
- Creating M2V for VTSM_01 segment 14
- Creating M2V for VTSM_01 segment 15
- Extracting STILLS for VTSM_01 segment 16
- Extracting STILLS for VTSM_01 segment 17
- Extracting STILLS for VTSM_01 segment 18
- Extracting STILLS for VTSM_01 segment 19
- Extracting STILLS for VTSM_01 segment 20
- Extracting STILLS for VTSM_01 segment 21
- Extracting STILLS for VTSM_01 segment 22
- Creating M2V for VTS_01 segment 0
- Creating M2V for VTS_01 segment 1
- Creating M2V for VTS_01 segment 2
- Creating M2V for VTS_01 segment 3
- Creating M2V for VTS_01 segment 4
- Creating M2V for VTS_01 segment 5
- Creating M2V for VTS_01 segment 6
- Creating M2V for VTS_01 segment 7
- Creating M2V for VTS_01 segment 8
- Creating M2V for VTS_01 segment 9
- Creating M2V for VTS_01 segment 10
- Creating M2V for VTS_01 segment 11
- Creating M2V for VTS_01 segment 12
- Creating M2V for VTS_01 segment 13
- Creating M2V for VTS_01 segment 14
- Creating M2V for VTS_01 segment 15
- Creating M2V for VTS_01 segment 16
- Creating M2V for VTS_01 segment 17
- Creating M2V for VTS_01 segment 18
- Creating M2V for VTS_01 segment 19
- Creating M2V for VTS_01 segment 20
- Creating M2V for VTS_01 segment 21
- Creating M2V for VTS_01 segment 22
- Creating M2V for VTS_01 segment 23
- Creating M2V for VTS_01 segment 24
- Creating M2V for VTS_01 segment 25
- Creating M2V for VTS_01 segment 26
- Creating M2V for VTS_01 segment 27
- Creating M2V for VTS_01 segment 28
- Creating M2V for VTS_01 segment 29
- Creating M2V for VTS_01 segment 30
- Creating M2V for VTS_01 segment 31
- Creating M2V for VTS_01 segment 32
- Creating M2V for VTS_01 segment 33
- Creating M2V for VTS_01 segment 34
- Creating M2V for VTS_01 segment 35
- Creating M2V for VTS_01 segment 36
- Creating M2V for VTS_02 segment 0
- Creating M2V for VTS_02 segment 1
- Creating M2V for VTS_02 segment 2
- Creating M2V for VTS_02 segment 3
- Creating M2V for VTS_02 segment 4
- Creating M2V for VTS_02 segment 5
- Extracting STILLS for VTS_02 segment 6
[19:09:20] Phase II ENCODING completed in 41 minutes.
[19:09:20] Phase III, REBUILD started.
- Copying IFO, BUP, and unaltered files...
- Processing VTS_01
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Updating NAVPACKS for VOBID_01
- Rebuilding seg 1 VOBID 2 CELLID 1
- Updating NAVPACKS for VOBID_02
- Rebuilding seg 2 VOBID 3 CELLID 1
- Updating NAVPACKS for VOBID_03
- Rebuilding seg 3 VOBID 4 CELLID 1
- Updating NAVPACKS for VOBID_04
- Rebuilding seg 4 VOBID 5 CELLID 1
- Rebuilding seg 5 VOBID 5 CELLID 2
- Rebuilding seg 6 VOBID 5 CELLID 3
- Rebuilding seg 7 VOBID 5 CELLID 4
- Rebuilding seg 8 VOBID 5 CELLID 5
- Rebuilding seg 9 VOBID 5 CELLID 6
- Rebuilding seg 10 VOBID 5 CELLID 7
- Rebuilding seg 11 VOBID 5 CELLID 8
- Rebuilding seg 12 VOBID 5 CELLID 9
- Rebuilding seg 13 VOBID 5 CELLID 10
- Rebuilding seg 14 VOBID 5 CELLID 11
- Rebuilding seg 15 VOBID 5 CELLID 12
- Rebuilding seg 16 VOBID 5 CELLID 13
- Rebuilding seg 17 VOBID 5 CELLID 14
- Rebuilding seg 18 VOBID 5 CELLID 15
- Rebuilding seg 19 VOBID 5 CELLID 16
- Updating NAVPACKS for VOBID_05
- Rebuilding seg 20 VOBID 6 CELLID 1
- Rebuilding seg 21 VOBID 6 CELLID 2
- Rebuilding seg 22 VOBID 6 CELLID 3
- Rebuilding seg 23 VOBID 6 CELLID 4
- Rebuilding seg 24 VOBID 6 CELLID 5
- Rebuilding seg 25 VOBID 6 CELLID 6
- Rebuilding seg 26 VOBID 6 CELLID 7
- Rebuilding seg 27 VOBID 6 CELLID 8
- Rebuilding seg 28 VOBID 6 CELLID 9
- Updating NAVPACKS for VOBID_06
- Rebuilding seg 29 VOBID 7 CELLID 1
- Rebuilding seg 30 VOBID 7 CELLID 2
- Rebuilding seg 31 VOBID 7 CELLID 3
- Rebuilding seg 32 VOBID 7 CELLID 4
- Rebuilding seg 33 VOBID 7 CELLID 5
- Rebuilding seg 34 VOBID 7 CELLID 6
- Rebuilding seg 35 VOBID 7 CELLID 7
- Rebuilding seg 36 VOBID 7 CELLID 8
- Updating NAVPACKS for VOBID_07
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_01_0.IFO
- Updating TMAP table...
- Processing VTS_02
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Updating NAVPACKS for VOBID_01
- Rebuilding seg 1 VOBID 2 CELLID 1
- Updating NAVPACKS for VOBID_02
- Rebuilding seg 2 VOBID 3 CELLID 1
- Updating NAVPACKS for VOBID_03
- Rebuilding seg 3 VOBID 4 CELLID 1
- Updating NAVPACKS for VOBID_04
- Rebuilding seg 4 VOBID 5 CELLID 1
- Updating NAVPACKS for VOBID_05
- Rebuilding seg 5 VOBID 6 CELLID 1
- Updating NAVPACKS for VOBID_06
- Rebuilding seg 6 VOBID 7 CELLID 1
- Updating NAVPACKS for VOBID_07
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_02_0.IFO
- Updating TMAP table...
- Processing VTSM_01
- Rebuilding seg 0 VOBID 1 CELLID 1
- Rebuilding seg 1 VOBID 1 CELLID 2
- Rebuilding seg 2 VOBID 1 CELLID 3
- Updating NAVPACKS for VOBID_01
- Rebuilding seg 3 VOBID 2 CELLID 1
- Updating NAVPACKS for VOBID_02
- Rebuilding seg 4 VOBID 3 CELLID 1
- Updating NAVPACKS for VOBID_03
- Rebuilding seg 5 VOBID 4 CELLID 1
- Updating NAVPACKS for VOBID_04
- Rebuilding seg 6 VOBID 5 CELLID 1
- Updating NAVPACKS for VOBID_05
- Rebuilding seg 7 VOBID 6 CELLID 1
- Updating NAVPACKS for VOBID_06
- Rebuilding seg 8 VOBID 7 CELLID 1
- Updating NAVPACKS for VOBID_07
- Rebuilding seg 9 VOBID 8 CELLID 1
- Updating NAVPACKS for VOBID_08
- Rebuilding seg 10 VOBID 9 CELLID 1
- Updating NAVPACKS for VOBID_09
- Rebuilding seg 11 VOBID 10 CELLID 1
- Updating NAVPACKS for VOBID_10
- Rebuilding seg 12 VOBID 11 CELLID 1
- Updating NAVPACKS for VOBID_11
- Rebuilding seg 13 VOBID 12 CELLID 1
- Rebuilding seg 14 VOBID 12 CELLID 2
- Rebuilding seg 15 VOBID 12 CELLID 3
- Updating NAVPACKS for VOBID_12
- Rebuilding seg 16 VOBID 13 CELLID 1
- Updating NAVPACKS for VOBID_13
- Rebuilding seg 17 VOBID 14 CELLID 1
- Updating NAVPACKS for VOBID_14
- Rebuilding seg 18 VOBID 15 CELLID 1
- Updating NAVPACKS for VOBID_15
- Rebuilding seg 19 VOBID 16 CELLID 1
- Updating NAVPACKS for VOBID_16
- Rebuilding seg 20 VOBID 17 CELLID 1
- Updating NAVPACKS for VOBID_17
- Rebuilding seg 21 VOBID 18 CELLID 1
- Updating NAVPACKS for VOBID_18
- Rebuilding seg 22 VOBID 19 CELLID 1
- Updating NAVPACKS for VOBID_19
- Updated VTSM_C_ADT.
- Updated VTSM_VOBU_ADMAP.
- Updated IFO: VTS_01_0.IFO
- Correcting VTS Sectors...
- Building ISO Image...
- Removing DVD files
- ISO Image successfully created.
[19:22:45] Phase III, REBUILD completed in 13 minutes.
Done.
[19:22:45] PREPARE/ENCODE/REBUILD completed in 56 min.
|
AfterDawn Addict
1 product review
|
14. December 2007 @ 20:39 |
Link to this message
|
|
teflonmyk
Could you run Lord of the rings LOR II, just as creaky did? I can see that your system is fast!
" Please Read!!! Post your questions only in This Thread or they will go unanswered:
Help with development of BD RB: Donations at: http://www.jdobbs.com/. |
Moderator
1 product review
|
17. June 2008 @ 16:21 |
Link to this message
|
[22:38:37] Phase I, PREPARATION started.
- DVD-RB v1.26.6
- AVISYNTH 2.5.7.0
- CCE 2.70.2.12 encoder selected.
- Source: VIDEOS
- VTS_01: 3,306,953 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 185,241 frames.
-- Building .AVS and .ECL files
- Reduction Level for DVD-5: 49.3%
- Overall Bitrate : 2,929/2,343Kbs
- Space for Video : 2,210,150KB
- HIGH/LOW/TYPICAL Bitrates: 3,939/786/2,343 Kbs
[22:42:32] Phase I, PREPARATION completed in 4 minutes.
[22:42:32] Phase II ENCODING started
- Creating M2V for VTS_01 segment 0
- Creating M2V for VTS_01 segment 1
- Creating M2V for VTS_01 segment 2
- Creating M2V for VTS_01 segment 3
- Creating M2V for VTS_01 segment 4
- Creating M2V for VTS_01 segment 5
- Creating M2V for VTS_01 segment 6
- Creating M2V for VTS_01 segment 7
- Creating M2V for VTS_01 segment 8
- Creating M2V for VTS_01 segment 9
- Creating M2V for VTS_01 segment 10
- Creating M2V for VTS_01 segment 11
- Creating M2V for VTS_01 segment 12
- Creating M2V for VTS_01 segment 13
- Creating M2V for VTS_01 segment 14
- Creating M2V for VTS_01 segment 15
- Creating M2V for VTS_01 segment 16
- Creating M2V for VTS_01 segment 17
- Extracting Video for VTS_01 segment 18
- Creating M2V for VTS_01 segment 19
- Creating M2V for VTS_01 segment 20
- Creating M2V for VTS_01 segment 21
- Creating M2V for VTS_01 segment 22
- Creating M2V for VTS_01 segment 23
- Creating M2V for VTS_01 segment 24
- Creating M2V for VTS_01 segment 25
- Creating M2V for VTS_01 segment 26
- Creating M2V for VTS_01 segment 27
- Creating M2V for VTS_01 segment 28
- Creating M2V for VTS_01 segment 29
- Creating M2V for VTS_01 segment 30
- Creating M2V for VTS_01 segment 31
- Creating M2V for VTS_01 segment 32
- Creating M2V for VTS_01 segment 33
- Creating M2V for VTS_01 segment 34
- Creating M2V for VTS_01 segment 35
- Creating M2V for VTS_01 segment 36
- Creating M2V for VTS_01 segment 37
- Creating M2V for VTS_01 segment 38
- Extracting STILLS for VTS_01 segment 39
[23:09:43] Phase II ENCODING completed in 27 minutes.
[05:52:42] Phase III, REBUILD started.
- Copying IFO, BUP, and unaltered files...
- Processing VTS_01
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Rebuilding seg 1 VOBID 1 CELLID 2
- Rebuilding seg 2 VOBID 1 CELLID 3
- Rebuilding seg 3 VOBID 1 CELLID 4
- Rebuilding seg 4 VOBID 1 CELLID 5
- Rebuilding seg 5 VOBID 1 CELLID 6
- Rebuilding seg 6 VOBID 1 CELLID 7
- Rebuilding seg 7 VOBID 1 CELLID 8
- Rebuilding seg 8 VOBID 1 CELLID 9
- Rebuilding seg 9 VOBID 1 CELLID 10
- Rebuilding seg 10 VOBID 1 CELLID 11
- Rebuilding seg 11 VOBID 1 CELLID 12
- Rebuilding seg 12 VOBID 1 CELLID 13
- Rebuilding seg 13 VOBID 1 CELLID 14
- Rebuilding seg 14 VOBID 1 CELLID 15
- Rebuilding seg 15 VOBID 1 CELLID 16
- Rebuilding seg 16 VOBID 1 CELLID 17
- Rebuilding seg 17 VOBID 1 CELLID 18
- Rebuilding seg 18 VOBID 1 CELLID 19
- Rebuilding seg 19 VOBID 1 CELLID 20
- Rebuilding seg 20 VOBID 1 CELLID 21
- Rebuilding seg 21 VOBID 1 CELLID 22
- Rebuilding seg 22 VOBID 1 CELLID 23
- Rebuilding seg 23 VOBID 1 CELLID 24
- Rebuilding seg 24 VOBID 1 CELLID 25
- Rebuilding seg 25 VOBID 1 CELLID 26
- Rebuilding seg 26 VOBID 1 CELLID 27
- Rebuilding seg 27 VOBID 1 CELLID 28
- Rebuilding seg 28 VOBID 1 CELLID 29
- Rebuilding seg 29 VOBID 1 CELLID 30
- Rebuilding seg 30 VOBID 1 CELLID 31
- Rebuilding seg 31 VOBID 1 CELLID 32
- Rebuilding seg 32 VOBID 1 CELLID 33
- Rebuilding seg 33 VOBID 1 CELLID 34
- Rebuilding seg 34 VOBID 1 CELLID 35
- Rebuilding seg 35 VOBID 1 CELLID 36
- Rebuilding seg 36 VOBID 1 CELLID 37
- Rebuilding seg 37 VOBID 1 CELLID 38
- Rebuilding seg 38 VOBID 1 CELLID 39
- Updating NAVPACKS for VOBID_01
- Rebuilding seg 39 VOBID 2 CELLID 1
- Updating NAVPACKS for VOBID_02
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_01_0.IFO
- Updating TMAP table...
- Correcting VTS Sectors...
- Building ISO Image...
- ISO Image successfully created.
[06:02:33] Phase III, REBUILD completed in 10 minutes.
Done.
[06:02:33] PREPARE/ENCODE/REBUILD completed in 444 min.
The final time is a little off because I started it and went to bed...when I woke up the "one click" mode was asking for another click :)
Quote:
[23:09:43] Phase II ENCODING completed in 27 minutes.
[05:52:42] Phase III, REBUILD started.
So the breakdown is as so:
Prep = 4 minutes
Encode = 27 minutes
Rebuild = 10 minutes
Quote:
Total time = 41 minutes
Two Towers Extended 2 disc edition, joined with DVD Shrink set at zero compression for one 7.12 gig VIDEO_TS folder using Vista Ultimate 32 bit on a Q6600 with 2 gigs of RAM standard clocking.
|
Moderator
1 product review
|
17. June 2008 @ 17:31 |
Link to this message
|
Vista Ultimate 64 bit....thought it was supposed to be faster????
[16:40:57] One Click encoding activated...
-----------------
[16:41:00] Phase I, PREPARATION started.
- DVD-RB v1.26.6
- AVISYNTH 2.5.6.0
- CCE 2.70.2.12 encoder selected.
- Source: VIDEOS
- VTS_01: 3,306,953 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 185,241 frames.
-- Building .AVS and .ECL files
- Reduction Level for DVD-5: 49.3%
- Overall Bitrate : 2,929/2,343Kbs
- Space for Video : 2,210,150KB
- HIGH/LOW/TYPICAL Bitrates: 3,939/786/2,343 Kbs
[16:44:03] Phase I, PREPARATION completed in 3 minutes.
[16:44:03] Phase II ENCODING started
- Creating M2V for VTS_01 segment 0
- Creating M2V for VTS_01 segment 1
- Creating M2V for VTS_01 segment 2
- Creating M2V for VTS_01 segment 3
- Creating M2V for VTS_01 segment 4
- Creating M2V for VTS_01 segment 5
- Creating M2V for VTS_01 segment 6
- Creating M2V for VTS_01 segment 7
- Creating M2V for VTS_01 segment 8
- Creating M2V for VTS_01 segment 9
- Creating M2V for VTS_01 segment 10
- Creating M2V for VTS_01 segment 11
- Creating M2V for VTS_01 segment 12
- Creating M2V for VTS_01 segment 13
- Creating M2V for VTS_01 segment 14
- Creating M2V for VTS_01 segment 15
- Creating M2V for VTS_01 segment 16
- Creating M2V for VTS_01 segment 17
- Extracting Video for VTS_01 segment 18
- Creating M2V for VTS_01 segment 19
- Creating M2V for VTS_01 segment 20
- Creating M2V for VTS_01 segment 21
- Creating M2V for VTS_01 segment 22
- Creating M2V for VTS_01 segment 23
- Creating M2V for VTS_01 segment 24
- Creating M2V for VTS_01 segment 25
- Creating M2V for VTS_01 segment 26
- Creating M2V for VTS_01 segment 27
- Creating M2V for VTS_01 segment 28
- Creating M2V for VTS_01 segment 29
- Creating M2V for VTS_01 segment 30
- Creating M2V for VTS_01 segment 31
- Creating M2V for VTS_01 segment 32
- Creating M2V for VTS_01 segment 33
- Creating M2V for VTS_01 segment 34
- Creating M2V for VTS_01 segment 35
- Creating M2V for VTS_01 segment 36
- Creating M2V for VTS_01 segment 37
- Creating M2V for VTS_01 segment 38
- Extracting STILLS for VTS_01 segment 39
[17:15:24] Phase II ENCODING completed in 31 minutes.
[17:15:25] Phase III, REBUILD started.
- Copying IFO, BUP, and unaltered files...
- Processing VTS_01
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Rebuilding seg 1 VOBID 1 CELLID 2
- Rebuilding seg 2 VOBID 1 CELLID 3
- Rebuilding seg 3 VOBID 1 CELLID 4
- Rebuilding seg 4 VOBID 1 CELLID 5
- Rebuilding seg 5 VOBID 1 CELLID 6
- Rebuilding seg 6 VOBID 1 CELLID 7
- Rebuilding seg 7 VOBID 1 CELLID 8
- Rebuilding seg 8 VOBID 1 CELLID 9
- Rebuilding seg 9 VOBID 1 CELLID 10
- Rebuilding seg 10 VOBID 1 CELLID 11
- Rebuilding seg 11 VOBID 1 CELLID 12
- Rebuilding seg 12 VOBID 1 CELLID 13
- Rebuilding seg 13 VOBID 1 CELLID 14
- Rebuilding seg 14 VOBID 1 CELLID 15
- Rebuilding seg 15 VOBID 1 CELLID 16
- Rebuilding seg 16 VOBID 1 CELLID 17
- Rebuilding seg 17 VOBID 1 CELLID 18
- Rebuilding seg 18 VOBID 1 CELLID 19
- Rebuilding seg 19 VOBID 1 CELLID 20
- Rebuilding seg 20 VOBID 1 CELLID 21
- Rebuilding seg 21 VOBID 1 CELLID 22
- Rebuilding seg 22 VOBID 1 CELLID 23
- Rebuilding seg 23 VOBID 1 CELLID 24
- Rebuilding seg 24 VOBID 1 CELLID 25
- Rebuilding seg 25 VOBID 1 CELLID 26
- Rebuilding seg 26 VOBID 1 CELLID 27
- Rebuilding seg 27 VOBID 1 CELLID 28
- Rebuilding seg 28 VOBID 1 CELLID 29
- Rebuilding seg 29 VOBID 1 CELLID 30
- Rebuilding seg 30 VOBID 1 CELLID 31
- Rebuilding seg 31 VOBID 1 CELLID 32
- Rebuilding seg 32 VOBID 1 CELLID 33
- Rebuilding seg 33 VOBID 1 CELLID 34
- Rebuilding seg 34 VOBID 1 CELLID 35
- Rebuilding seg 35 VOBID 1 CELLID 36
- Rebuilding seg 36 VOBID 1 CELLID 37
- Rebuilding seg 37 VOBID 1 CELLID 38
- Rebuilding seg 38 VOBID 1 CELLID 39
- Updating NAVPACKS for VOBID_01
- Rebuilding seg 39 VOBID 2 CELLID 1
- Updating NAVPACKS for VOBID_02
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_01_0.IFO
- Updating TMAP table...
- Correcting VTS Sectors...
[17:22:39] Phase III, REBUILD completed in 7 minutes.
Done.
[17:22:39] PREPARE/ENCODE/REBUILD completed in 42 min.
Prep = 3 minutes
Encode = 31 minutes
Rebuild = 7 minutes
Total time = 42 minutes
I'll admit I was doing a bit of multitasking during this process...trying to figure out how to merge two discs with DVDReMake Pro (In depth discussion about PGC's, VTS's and the likes makes me queasy) ;-)
|
AfterDawn Addict
4 product reviews
|
17. June 2008 @ 17:49 |
Link to this message
|
so this is on 2 disc and you combine it with shrink then run it through dvd-reb? how many passes loco?
|
Moderator
1 product review
|
17. June 2008 @ 18:19 |
Link to this message
|
I'm not that familiar with the program as I've only used it about 3-4 times, but here is what I'm looking at...
|
AfterDawn Addict
4 product reviews
|
17. June 2008 @ 19:01 |
Link to this message
|
|
if your looking at the screen shot you just posted. look in the advanced(expert)setting. click on it and at the bottom it will tell you how many passes. if you havent changed it i think its set as 2 passes as default.
if so that is great time on this.
|
Moderator
1 product review
|
17. June 2008 @ 19:11 |
Link to this message
|
Yep, two passes. I haven't touched any settings anyway...other than changing the skins.
|
AfterDawn Addict
4 product reviews
|
17. June 2008 @ 19:20 |
Link to this message
|
|
i like that skin. i will have to change mine..lol
|
Moderator
1 product review
|
17. June 2008 @ 21:29 |
Link to this message
|
Yeah, it's pretty good eh?
I let DVDRB run undisturbed while we ate dinner and watched a movie...guess what? 64 bit is faster :)
[19:13:09] One Click encoding activated...
-----------------
[19:13:11] Phase I, PREPARATION started.
- DVD-RB v1.26.6
- AVISYNTH 2.5.6.0
- CCE 2.70.2.12 encoder selected.
- Source: VIDEOS
- VTS_01: 3,306,953 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 185,241 frames.
-- Building .AVS and .ECL files
- Reduction Level for DVD-5: 49.3%
- Overall Bitrate : 2,929/2,343Kbs
- Space for Video : 2,210,150KB
- HIGH/LOW/TYPICAL Bitrates: 3,939/786/2,343 Kbs
[19:16:09] Phase I, PREPARATION completed in 3 minutes.
[19:16:09] Phase II ENCODING started
- Creating M2V for VTS_01 segment 0
- Creating M2V for VTS_01 segment 1
- Creating M2V for VTS_01 segment 2
- Creating M2V for VTS_01 segment 3
- Creating M2V for VTS_01 segment 4
- Creating M2V for VTS_01 segment 5
- Creating M2V for VTS_01 segment 6
- Creating M2V for VTS_01 segment 7
- Creating M2V for VTS_01 segment 8
- Creating M2V for VTS_01 segment 9
- Creating M2V for VTS_01 segment 10
- Creating M2V for VTS_01 segment 11
- Creating M2V for VTS_01 segment 12
- Creating M2V for VTS_01 segment 13
- Creating M2V for VTS_01 segment 14
- Creating M2V for VTS_01 segment 15
- Creating M2V for VTS_01 segment 16
- Creating M2V for VTS_01 segment 17
- Extracting Video for VTS_01 segment 18
- Creating M2V for VTS_01 segment 19
- Creating M2V for VTS_01 segment 20
- Creating M2V for VTS_01 segment 21
- Creating M2V for VTS_01 segment 22
- Creating M2V for VTS_01 segment 23
- Creating M2V for VTS_01 segment 24
- Creating M2V for VTS_01 segment 25
- Creating M2V for VTS_01 segment 26
- Creating M2V for VTS_01 segment 27
- Creating M2V for VTS_01 segment 28
- Creating M2V for VTS_01 segment 29
- Creating M2V for VTS_01 segment 30
- Creating M2V for VTS_01 segment 31
- Creating M2V for VTS_01 segment 32
- Creating M2V for VTS_01 segment 33
- Creating M2V for VTS_01 segment 34
- Creating M2V for VTS_01 segment 35
- Creating M2V for VTS_01 segment 36
- Creating M2V for VTS_01 segment 37
- Creating M2V for VTS_01 segment 38
- Extracting STILLS for VTS_01 segment 39
[19:41:35] Phase II ENCODING completed in 25 minutes.
[19:41:35] Phase III, REBUILD started.
- Copying IFO, BUP, and unaltered files...
- Processing VTS_01
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Rebuilding seg 1 VOBID 1 CELLID 2
- Rebuilding seg 2 VOBID 1 CELLID 3
- Rebuilding seg 3 VOBID 1 CELLID 4
- Rebuilding seg 4 VOBID 1 CELLID 5
- Rebuilding seg 5 VOBID 1 CELLID 6
- Rebuilding seg 6 VOBID 1 CELLID 7
- Rebuilding seg 7 VOBID 1 CELLID 8
- Rebuilding seg 8 VOBID 1 CELLID 9
- Rebuilding seg 9 VOBID 1 CELLID 10
- Rebuilding seg 10 VOBID 1 CELLID 11
- Rebuilding seg 11 VOBID 1 CELLID 12
- Rebuilding seg 12 VOBID 1 CELLID 13
- Rebuilding seg 13 VOBID 1 CELLID 14
- Rebuilding seg 14 VOBID 1 CELLID 15
- Rebuilding seg 15 VOBID 1 CELLID 16
- Rebuilding seg 16 VOBID 1 CELLID 17
- Rebuilding seg 17 VOBID 1 CELLID 18
- Rebuilding seg 18 VOBID 1 CELLID 19
- Rebuilding seg 19 VOBID 1 CELLID 20
- Rebuilding seg 20 VOBID 1 CELLID 21
- Rebuilding seg 21 VOBID 1 CELLID 22
- Rebuilding seg 22 VOBID 1 CELLID 23
- Rebuilding seg 23 VOBID 1 CELLID 24
- Rebuilding seg 24 VOBID 1 CELLID 25
- Rebuilding seg 25 VOBID 1 CELLID 26
- Rebuilding seg 26 VOBID 1 CELLID 27
- Rebuilding seg 27 VOBID 1 CELLID 28
- Rebuilding seg 28 VOBID 1 CELLID 29
- Rebuilding seg 29 VOBID 1 CELLID 30
- Rebuilding seg 30 VOBID 1 CELLID 31
- Rebuilding seg 31 VOBID 1 CELLID 32
- Rebuilding seg 32 VOBID 1 CELLID 33
- Rebuilding seg 33 VOBID 1 CELLID 34
- Rebuilding seg 34 VOBID 1 CELLID 35
- Rebuilding seg 35 VOBID 1 CELLID 36
- Rebuilding seg 36 VOBID 1 CELLID 37
- Rebuilding seg 37 VOBID 1 CELLID 38
- Rebuilding seg 38 VOBID 1 CELLID 39
- Updating NAVPACKS for VOBID_01
- Rebuilding seg 39 VOBID 2 CELLID 1
- Updating NAVPACKS for VOBID_02
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_01_0.IFO
- Updating TMAP table...
- Correcting VTS Sectors...
[19:48:44] Phase III, REBUILD completed in 7 minutes.
Done.
[19:48:44] PREPARE/ENCODE/REBUILD completed in 35 min.
But only by six minutes...lol
This message has been edited since posting. Last time this message was edited on 17. June 2008 @ 21:49
|
Senior Member
|
18. June 2008 @ 18:18 |
Link to this message
|
[14:16:11] One Click encoding activated...
-----------------
[14:16:11] Phase I, PREPARATION started.
- DVD-RB v1.27.3
- AVISYNTH 2.5.6.0
- CCE 2.62+ encoder selected.
- Source: JUDGEPRIEST_DOCTORBULL
- VTS_01: 2,043,870 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 115,823 frames.
-- Building .AVS and .ECL files
- VTS_04: 2,152,469 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 114,019 frames.
-- Building .AVS and .ECL files
- Reduction Level for DVD-5: 54.0%
- Overall Bitrate : 4,676/3,741Kbs
- Space for Video : 4,377,544KB
- HIGH/LOW/TYPICAL Bitrates: 4,471/1,178/3,741 Kbs
[14:18:18] Phase I, PREPARATION completed in 2 minutes.
[14:18:18] Phase II ENCODING started
- Creating M2V for VTS_01 segment 0
- Creating M2V for VTS_01 segment 1
- Creating M2V for VTS_01 segment 2
- Creating M2V for VTS_01 segment 3
- Creating M2V for VTS_01 segment 4
- Creating M2V for VTS_01 segment 5
- Creating M2V for VTS_01 segment 6
- Creating M2V for VTS_01 segment 7
- Creating M2V for VTS_01 segment 8
- Creating M2V for VTS_01 segment 9
- Creating M2V for VTS_01 segment 10
- Creating M2V for VTS_01 segment 11
- Creating M2V for VTS_01 segment 12
- Creating M2V for VTS_01 segment 13
- Creating M2V for VTS_01 segment 14
- Creating M2V for VTS_01 segment 15
- Creating M2V for VTS_01 segment 16
- Creating M2V for VTS_01 segment 17
- Creating M2V for VTS_01 segment 18
- Creating M2V for VTS_01 segment 19
- Creating M2V for VTS_01 segment 20
- Creating M2V for VTS_01 segment 21
- Creating M2V for VTS_01 segment 22
- Creating M2V for VTS_01 segment 23
- Creating M2V for VTS_01 segment 24
- Creating M2V for VTS_01 segment 25
- Extracting STILLS for VTS_01 segment 26
- Extracting STILLS for VTS_01 segment 27
- Creating M2V for VTS_04 segment 0
- Creating M2V for VTS_04 segment 1
- Creating M2V for VTS_04 segment 2
- Creating M2V for VTS_04 segment 3
- Creating M2V for VTS_04 segment 4
- Creating M2V for VTS_04 segment 5
- Creating M2V for VTS_04 segment 6
- Creating M2V for VTS_04 segment 7
- Creating M2V for VTS_04 segment 8
- Creating M2V for VTS_04 segment 9
- Creating M2V for VTS_04 segment 10
- Creating M2V for VTS_04 segment 11
- Creating M2V for VTS_04 segment 12
- Creating M2V for VTS_04 segment 13
- Creating M2V for VTS_04 segment 14
- Creating M2V for VTS_04 segment 15
- Creating M2V for VTS_04 segment 16
- Creating M2V for VTS_04 segment 17
- Creating M2V for VTS_04 segment 18
- Creating M2V for VTS_04 segment 19
- Creating M2V for VTS_04 segment 20
- Creating M2V for VTS_04 segment 21
- Creating M2V for VTS_04 segment 22
- Creating M2V for VTS_04 segment 23
- Creating M2V for VTS_04 segment 24
- Extracting STILLS for VTS_04 segment 25
- Extracting STILLS for VTS_04 segment 26
[14:47:21] Phase II ENCODING completed in 29 minutes.
[14:47:21] Phase III, REBUILD started.
- Copying IFO, BUP, and unaltered files...
- Processing VTS_01
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Rebuilding seg 1 VOBID 1 CELLID 2
- Rebuilding seg 2 VOBID 1 CELLID 3
- Rebuilding seg 3 VOBID 1 CELLID 4
- Updating NAVPACKS for VOBID_01
- Rebuilding seg 4 VOBID 2 CELLID 1
- Rebuilding seg 5 VOBID 2 CELLID 2
- Rebuilding seg 6 VOBID 2 CELLID 3
- Rebuilding seg 7 VOBID 2 CELLID 4
- Rebuilding seg 8 VOBID 2 CELLID 5
- Updating NAVPACKS for VOBID_02
- Rebuilding seg 9 VOBID 3 CELLID 1
- Rebuilding seg 10 VOBID 3 CELLID 2
- Rebuilding seg 11 VOBID 3 CELLID 3
- Rebuilding seg 12 VOBID 3 CELLID 4
- Updating NAVPACKS for VOBID_03
- Rebuilding seg 13 VOBID 4 CELLID 1
- Rebuilding seg 14 VOBID 4 CELLID 2
- Rebuilding seg 15 VOBID 4 CELLID 3
- Rebuilding seg 16 VOBID 4 CELLID 4
- Updating NAVPACKS for VOBID_04
- Rebuilding seg 17 VOBID 5 CELLID 1
- Rebuilding seg 18 VOBID 5 CELLID 2
- Updating NAVPACKS for VOBID_05
- Rebuilding seg 19 VOBID 6 CELLID 1
- Rebuilding seg 20 VOBID 6 CELLID 2
- Rebuilding seg 21 VOBID 6 CELLID 3
- Rebuilding seg 22 VOBID 6 CELLID 4
- Rebuilding seg 23 VOBID 6 CELLID 5
- Updating NAVPACKS for VOBID_06
- Rebuilding seg 24 VOBID 7 CELLID 1
- Rebuilding seg 25 VOBID 7 CELLID 2
- Updating NAVPACKS for VOBID_07
- Rebuilding seg 26 VOBID 8 CELLID 1
- Updating NAVPACKS for VOBID_08
- Rebuilding seg 27 VOBID 9 CELLID 1
- Updating NAVPACKS for VOBID_09
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_01_0.IFO
- Updating TMAP table...
- Processing VTS_04
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Rebuilding seg 1 VOBID 1 CELLID 2
- Rebuilding seg 2 VOBID 1 CELLID 3
- Rebuilding seg 3 VOBID 1 CELLID 4
- Updating NAVPACKS for VOBID_01
- Rebuilding seg 4 VOBID 2 CELLID 1
- Rebuilding seg 5 VOBID 2 CELLID 2
- Rebuilding seg 6 VOBID 2 CELLID 3
- Updating NAVPACKS for VOBID_02
- Rebuilding seg 7 VOBID 3 CELLID 1
- Rebuilding seg 8 VOBID 3 CELLID 2
- Rebuilding seg 9 VOBID 3 CELLID 3
- Rebuilding seg 10 VOBID 3 CELLID 4
- Rebuilding seg 11 VOBID 3 CELLID 5
- Updating NAVPACKS for VOBID_03
- Rebuilding seg 12 VOBID 4 CELLID 1
- Rebuilding seg 13 VOBID 4 CELLID 2
- Rebuilding seg 14 VOBID 4 CELLID 3
- Rebuilding seg 15 VOBID 4 CELLID 4
- Rebuilding seg 16 VOBID 4 CELLID 5
- Updating NAVPACKS for VOBID_04
- Rebuilding seg 17 VOBID 5 CELLID 1
- Rebuilding seg 18 VOBID 5 CELLID 2
- Rebuilding seg 19 VOBID 5 CELLID 3
- Rebuilding seg 20 VOBID 5 CELLID 4
- Updating NAVPACKS for VOBID_05
- Rebuilding seg 21 VOBID 6 CELLID 1
- Rebuilding seg 22 VOBID 6 CELLID 2
- Rebuilding seg 23 VOBID 6 CELLID 3
- Rebuilding seg 24 VOBID 6 CELLID 4
- Updating NAVPACKS for VOBID_06
- Rebuilding seg 25 VOBID 7 CELLID 1
- Updating NAVPACKS for VOBID_07
- Rebuilding seg 26 VOBID 8 CELLID 1
- Updating NAVPACKS for VOBID_08
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_04_0.IFO
- Updating TMAP table...
- Correcting VTS Sectors...
- Building ISO Image...
- Removing DVD files
- ISO Image successfully created.
[14:56:28] Phase III, REBUILD completed in 9 minutes.
Done.
[14:56:28] PREPARE/ENCODE/REBUILD completed in 40 min.
Dropbox: http://db.tt/p5P9bH1d
System 1: Core2Quad Q6600 O/Ced @ 3.15 GHz, Gigabyte GA EP35 DS4 mobo, Zalman 9700, 4GB PC6400 RAM, Sapphire Radeon 2600HD Pro, Samsung 920BW 19" Widescreen LCD, Hauppauge! PVR-350.
System 2: Core2Duo E6400 O/Ced @ 3.2 GHz, Gigabyte GA 965P S3 mobo, Arctic Cooling Freezer 7 Pro, 2GB PC6400 RAM, PNY GeForce 6600, Hyundai B70A 17" LCD. |
AfterDawn Addict
1 product review
|
18. June 2008 @ 18:39 |
Link to this message
|
Interesting results guys, but to be fair everyone should be using the exact same DVD. Some of us selected LOR II years ago because other than changing the number of passes on the encoder there is little else that can be done to skew the results.
Different movies on DVD are not all equal, because in the end the speed results are measured by the total number of frames being re-encoded, and of course ones rigs processing speed.
I'll drop an encode over the next couple of days or so, I'm just waiting on a new board.
" Please Read!!! Post your questions only in This Thread or they will go unanswered:
Help with development of BD RB: Donations at: http://www.jdobbs.com/. This message has been edited since posting. Last time this message was edited on 18. June 2008 @ 18:40
|
AfterDawn Addict
4 product reviews
|
18. June 2008 @ 22:09 |
Link to this message
|
i dont have a original copy of LOTR 2. if its 2 disc like the one im looking at. will dvd-rebuilder join both disc. or do you have to do it like LOCO did and join them with dvdshrink?
ive seen it in walmart as a 2 disc set. i didnt really look closely at it was the second disc bonus features?
|
AfterDawn Addict
1 product review
|
18. June 2008 @ 22:15 |
Link to this message
|
|
LOR II is on a single disc.
" Please Read!!! Post your questions only in This Thread or they will go unanswered:
Help with development of BD RB: Donations at: http://www.jdobbs.com/. |
Moderator
1 product review
|
19. June 2008 @ 07:29 |
Link to this message
|
|
All of my LOTR discs are the two disc extended editions. I have all the Potter movies too and they are fairly large and on one disc though. Really I was just trying to set a baseline for me personally.
|
|
Advertisement
|
|
|
AfterDawn Addict
1 product review
|
19. June 2008 @ 09:39 |
Link to this message
|
Quote:
All of my LOTR discs are the two disc extended editions.
The title of the thread suggested a very interesting premise regarding encode speeds. Of course their are different encoders that have certain advantage and disadvantages regarding speeds. For instance using RB's multi processor feature some encoders will run on quad core processors. Although CCE will only run on two it is quite fast in comparison to other encoders. The point I was making is that an apples to apples test is the only way to measure the differences between processor encoding speeds.
Quote:
Really I was just trying to set a baseline for me personally.
No harm in that but it does make it difficult to answer the essential point of the question:Quote:
What kinda processor is the fastest for DVD-RB
" Please Read!!! Post your questions only in This Thread or they will go unanswered:
Help with development of BD RB: Donations at: http://www.jdobbs.com/. |
|
