|
ILO / LiteOn SMART Firmware Hacker
|
|
|
wipron
Newbie
|
12. February 2007 @ 05:32 |
Link to this message
|
|
Yes , you are right correct SN 0102-0143-0063-F2SC(100-010B)
Also, I took the cover off to see if it was the same as the other 5005's that I have, and on the main board, it reads lvw-5001! I don't know if that makes any difference or not, but weird huh?
|
|
Advertisement
|
|
|
|
|
LCSHG
Senior Member
|
12. February 2007 @ 08:52 |
Link to this message
|
Yes the LVW-5001 would make a difference But tthe second set of of 4 # seems off and I think should be 1143. Now that I think about it I read somware of another 5005 with a 5001 mainboard. It this is factory or someone has replaced the mainboard, I don't know
However
Go Here
http://pumapeople.com/liteon/
Select the US LVW-5001 Firmware
you should see see a selection with a second set of numbers 1143 I do not know if this is correct
Before you do anything
Go to these sites and post your question [Harpmaker] He is a moderator, well informed and has a 5001
http://www.normediasolutions.com/forum/viewforum.php?f=12
http://www.techolio.com/forums/phpBB2/viewforum.php?f=7
You should post all info and # along with a review of our discussion
This message has been edited since posting. Last time this message was edited on 12. February 2007 @ 15:00
|
|
LCSHG
Senior Member
|
12. February 2007 @ 15:03 |
Link to this message
|
|
The Edit on the above post was the refference to the 5001. I had typed 5995
Herb
|
|
wipron
Newbie
|
13. February 2007 @ 15:44 |
Link to this message
|
|
The SN 0102-0143-0063-F2SC(100-010B) is correct. The unit is actually a LVW-5001 upgraded to a 5005. I tried many, many different firmware upgrades. The LNFA1080.DS1 went into the machine and qued up for an upgrade, however, it just sat there for over an hour and did nothing. (screen said it was upgrading but the numbers on the front of the machine never left 00) Power got cut off by accident and I was left with a machine that either said "put in cd" or "error". Basically a paper weight. I got the machine to work again by installing the original 1063 firmware. (took a looong time to get there however). Works great now, just cannot lose the MV. The LNFA1063.D00 hacked firmare only reads "data disc". I have run out of options that I know how to try. Anyone else have any tricks for this machine? BRING IT ON!! THANKS! WIPRON
|
|
flyboybob
Newbie
|
7. April 2007 @ 05:53 |
Link to this message
|
|
I have a Liteon LVW-1101HC1 DVD recorder. Recently, when I insert a blank DVD, it says it is reading the DVD and then begins to prepare it; however it only gets to between 21% and 27% and then opens the DVD drawer. Any ideas?
|
|
Minster69
Newbie
|
17. April 2007 @ 03:39 |
Link to this message
|
|
I have the Liteon 5055 gdl+. I have downloaded the latest firmware from Liteon - England LNJPE028.DA3.
I have updated the recorder and the serial now reads 013C-4241-0028-B20P.
Can I use the Mr Wizard program to hack this firmware and re-apply?
If so has anyone done it successfully, with no side effects, green tint etc etc.
I am trying to turn off Macrovision, not bothered about region or lp mode.
Thanks in advance,
Paul
|
|
dbld_indy
Newbie
|
31. May 2007 @ 14:27 |
Link to this message
|
Originally posted by flyboybob:
I have a Liteon LVW-1101HC1 DVD recorder. Recently, when I insert a blank DVD, it says it is reading the DVD and then begins to prepare it; however it only gets to between 21% and 27% and then opens the DVD drawer. Any ideas?
Mine is doing the same? Did you ever get this issue solved or did you shop for a new burner?
|
|
LCSHG
Senior Member
|
6. June 2007 @ 20:04 |
Link to this message
|
|
Minster69
Missed your post
Did you find an answer to your questions
This message has been edited since posting. Last time this message was edited on 6. June 2007 @ 20:06
|
|
Minster69
Newbie
|
7. June 2007 @ 01:16 |
Link to this message
|
Originally posted by LCSHG:
Minster69
Missed your post
Did you find an answer to your questions
Nobody has really confirmed if it's okay and it defintely works, I think one person, might be from another forum said it was okay, nut without any real confirmation that they had done it.
If you can confirm the answers to my questions that would be great.
|
|
LCSHG
Senior Member
|
7. June 2007 @ 10:32 |
Link to this message
|
Minster69
Have a 5045 not the UK 5055. It is hacked and has a replaced PC drive
I cannot state real conformation or answers and you are correct in asking. Some firmware changes could be a real problem and result in a braid dead unit
I do not believe that the firmware mentioned can be hacked
If you look at The hack site [while it says ilo - ilo is a Liteon]
http://www.ncc2315.com/ilo/
There are limitations on the firmware that can be hacked for MV. there is a 5025ghc listed but does not seem to cover the UK5055.
If you cannot find an answer try this site
http://www.techolio.com/forums/phpBB2/
Again while ilo, it covers the Liteon. You might try this site and post.
I asked because I think this issue was covered by posts sometime back and there are some of these units avail. In the US
It seems that a user in the UK had a similar issue and reported it solved .
|
|
Minster69
Newbie
|
8. June 2007 @ 00:36 |
Link to this message
|
Originally posted by LCSHG:
Minster69
Have a 5045 not the UK 5055. It is hacked and has a replaced PC drive
I cannot state real conformation or answers and you are correct in asking. Some firmware changes could be a real problem and result in a braid dead unit
I do not believe that the firmware mentioned can be hacked
If you look at The hack site [while it says ilo - ilo is a Liteon]
http://www.ncc2315.com/ilo/
There are limitations on the firmware that can be hacked for MV. there is a 5025ghc listed but does not seem to cover the UK5055.
If you cannot find an answer try this site
http://www.techolio.com/forums/phpBB2/
Again while ilo, it covers the Liteon. You might try this site and post.
I asked because I think this issue was covered by posts sometime back and there are some of these units avail. In the US
It seems that a user in the UK had a similar issue and reported it solved .
Thanks a lot for your help.
Paul
|
|
ackaite
Newbie
|
25. July 2007 @ 20:57 |
Link to this message
|
Originally posted by flyboybob:
I have a Liteon LVW-1101HC1 DVD recorder. Recently, when I insert a blank DVD, it says it is reading the DVD and then begins to prepare it; however it only gets to between 21% and 27% and then opens the DVD drawer. Any ideas?
mine is doing same thing just started doing it today has anyone else with this problem got it up and going???? using verbatim dvd+r media like i always have and have the latest hacked firmware PLease Help before i junk it lol
|
|
LCSHG
Senior Member
|
26. July 2007 @ 17:30 |
Link to this message
|
Please look at my posts on this page, the info and the links given. Also this one.
http://www.normediasolutions.com/forum/viewforum.php?f=12
These three sites have a lot of info on the Liteon/ilo.
When you say hacked do you mean for region or MV or both?
I believe the unit above and yours are UK versions and I am not sure that either can be hacked for MV but might be for region.
It appears by your posts that the DVD drive night be going bad and I do not see any reason that it could not be replaced. The sites given, list the drives that are known to work on all functions
Unfortunately a number of sites, as an example, have posted that the 160p and later will work. It Will but Fast Forward is lost and if used the unit will lock up
It could be that others that have a similar unit and problems have found an answer
A Note
The US versions of some, no longer made, units are non-compliant. I do not know if the UK units are
|
|
dbld_indy
Newbie
|
26. July 2007 @ 19:09 |
Link to this message
|
|
Thanks for the help, I will start shopping for a replacement drive and will go from there.
PEACE!
DBL_D! OUT!
|
|
LCSHG
Senior Member
|
26. July 2007 @ 19:52 |
Link to this message
|
All with UK units you might want to look at this site and thread. The posts by Brian Duffy towards the latter part of page 1 and the responses may be of interest.
http://www.normediasolutions.com/forum/v...07bf73e56479e13
His use of a 16H5s, which is the same as a 1635s, that I had used would seem the same except for the 16H5s lite-scribe.
I just assumed the 1635s was in the same family as the 1693s but is not. It is 1 family newer than the 1693s but below the 160p series.
It seems that he resolved problems that could be related to issues posted here. You might try to contact him. He is in London
|
AfterDawn Addict
|
26. July 2007 @ 19:53 |
Link to this message
|
|
I have replaced the drives in three LVW-5005 recorders using (2) SHW160P series drives and (1) SOHW1693s . . while it is true that you cannot fast forward with the 160 series drives, they are much better than the original. The 1693 series drive allows for fast forwarding but may be difficult to find for a reasonable price.
Personally I couldn't care less about how they play discs as I have never used them as playback machines . . . I had to 'test' them out though.
The 160/165 series drives work very well and can be had for a reasonable price - - - highly recommended!
Victor
DISCLAIMER: If you find a posting or message from me
offensive, inappropriate, or disruptive, please ignore it.
If you dont know how to ignore a posting, complain to
me and I will be only too happy to demonstrate . . .
|
|
ackaite
Newbie
|
27. July 2007 @ 22:03 |
Link to this message
|
im dunno about a uk version it i did the firmware mod downloaded latest firmware from liton and did the mod on it it said it removed mv and region free but the firmware worked fine for awhile it just started ejecting the dvd when it get to 21Z% preparing ive seen other have the same problem have u guys got it to go away or figure it out
|
|
CrazCanuk
Junior Member
|
29. July 2007 @ 05:45 |
Link to this message
|
|
Hi ackaite, sorry to be the bearer of bad news, the smart ilo/liteon hacker was design for the early ILO/Liteon models numbered 50xx and the ILO 04s, the hack (MV portion) doesn't work on later Liteon models such as the 1101.
|
|
ackaite
Newbie
|
29. July 2007 @ 21:08 |
Link to this message
|
oh yeah umm it seemed to work for awhile...but can i just load the firmware on it from the liteon site being i already updated with it but with the hacks
|
|
CrazCanuk
Junior Member
|
30. July 2007 @ 06:23 |
Link to this message
|
No harm in doing that, you'll probably get the 3-hour and region free features if you didn't have them before, plus any official update Liteon has for that model, just the MV part will still be active (copy-protection on). The hack program only looks for 3 hex addresses, one to add the 3-hour mode, one to set region free which actually drops the code by one for Region 1 users, for users outside Region 1, you'll need to go the remote way by pressing 2-9-6-0 while sitting on exit to open the hidden region menu, then choose the region 0, and the last address, sets MV at disable, Liteon has changed that address on newer models such as yours. All this to say yes you can apply the firmware, no issue, can only gain.
|
|
LCSHG
Senior Member
|
1. August 2007 @ 00:29 |
Link to this message
|
A Quote
?oh yeah umm it seemed to work for awhile?
----------------------------
[seemed] and [awhile] are the key words
As CC said the hack does not work for copy protection on the 1101, [US or UK]
The unit is also CP compliant.
You can put any flavor firmware on it and than hack it and it will still respond [refuse] to copy a truly CP tape or disk
[Read the Update section on the SMART Firmware Hacker page
PS
The hack to remove MV is for analog MV as a VHS tape
A note on the use of the Liteon 160 series drives that do not work on FF.
Almost a year ago, I had replaced a bad drive in a ilo RHD04 with a 160p, supplied by the owner that now lives in a different State, and said he didn?t care about the FF
He now wants to use the unit to edit and play. Unless the remote FF button is disabled, any use of FF will lock the unit up and require it to be unplugged and restarted. After speaking with him and as the drive fit had already been done, he installed a 1213s which works fine.
The Moral
Make sure when installing a drive that does not support FF that you really do not care about FF
|
|
Advertisement
|
|
|
|
aceinface
Newbie
|
16. September 2007 @ 17:48 |
Link to this message
|
|
hello all, new user, I just bought a Ilo DVDR04 and was wondering how do I hack it so that I can back up my dvd movies. Can I get a step by step way of how to do this? i have never done this before so I am a little slow at it. Sorry. Any help would be appreciated. I am not very computer smart but with good directions I can figure it out. aceinface
|
