|
Digivox T mmds get it going (UPDATED)
|
|
|
tdtd80
Member
|
8. February 2009 @ 16:24 |
Link to this message
|
Hi,
People are like myself and like step by step instruction on how things go with these free/view boxes. I didn?t know what all this stuff was when I came on here either.
To get the digivox T going read all of this:
Print out and read a few times to know what you are about to do
What will be talked about:
1. RS232 cable
2. Firmware
3. Flashing
4. Downloader 10
5. .bin files
6. MMDS
7. Power Supply DC Adapters
Where to find above:
MMDS these are the aerials on the roof Mesh
http://www.bubblesupplies.co.uk/categori...wer-Supply%27s/
RS232 Cable (there are 2 and do the same):
Female to Female
http://www.crown-sat.com/image/mid/rs232-cable-big.jpg
USB
http://www.nexus-computers.co.uk/shop/im...RS232_cable.jpg
FLASHING:
This is where you connect your RS232 cable from your computer to your digivox T
FIRMWARE:
This is updating your digivox T with the latest software
(e.g.) from version 3.1 to version 3.2
DOWNLOADER 10:
This is the software (exe) that you use to update your digivox T.
When the digivox T is connected to your computer by the RS232 cable you RUN this software.
.BIN FILE:
This is the file that the Downloader 10 looks for to update your digivox T.
POWER SUPPLY AC ADAPTER
http://www.bubblesupplies.co.uk/products...-Adapters.html#
This is for Digivox T free view box:
Please note that some sites may want you to join????
So join and then re-enter the link and the files should be there?.
First of all you get the Downloader 10 (exe) file
http://www.4shared.com/file/41965575/d5b...wnloader10.html
Now get the .bin file
http://www.digital-kaos.co.uk/forums/dow...mmds-v3300-521/
Now the best thing to do here is
Make a folder on you desktop called XYZ (just a name)
And put the downloader 10 and .bin file in there.(by doing this it will find the file itself)
Connect the digivox T to your computer by using the RS232 cable
Now I read on this site that you are better off XP and not VISTA for this so if you are not very good at computers get a hand here. (ask your children you will be surprised what they know)
Turn on the digivox T
Now go into that folder (XYZ)?. Run the downloader 10 (exe) (double-click on it)
Check to see if ?APP? is selected
Now press BROWSE to find the .bin file (usually it will find it, if it?s in the same folder as the downloader 10) OR find it by looking for that folder called XYZ on the desktop that you made earlier
When you find that .bin file,
Click DOWNLOAD
A process bar will then appear and start to fill up
Wait for DOWNLOAD WINDOW to say COMPLETE
Turn off the digivox T and remove the cable
Now you have FLASHED the digivox T with the latest FIRMWARE using the DOWNLOADER 10 (exe) through the RS232 cable.
Now you connect your digivox T to the TV.
Assuming you have all this:
The lead from the aerial goes into the bronze part of the MMDS POWER SUPPLY AC ADAPTER called DOWNCONVERTER
Now the lead from your digivox T goes into the bronze part of the MMDS POWER SUPPLY AC ADAPTER called TV
Plug in the MMDS POWER SUPPLY AC ADAPTER into wall for power
Connect the digivox T to your TV by the scart lead
Turn on your TV
Turn on the digivox T
You will notice that the digivox T will overwrite all channels and come on your Tv screen.
A screen with stars on it will appear (or press MENU)
Press INSTALLATION (OK)
Scroll down and turn ANTENNA to ?ON?
Scroll up and perform and AUTOMATIC SCAN (OK)
You will notice channels coming up let it finish
When this is finished it will start to update LET IT
The digivox T will go from 1 ? 200% (You can stop this)
Next you press MENU
Scroll down to SYSTEM INFORMATION (OK)
This screen will tell you about your digivox DATE, MAKE, VERSION (this should be update with the date you flashed the box eg 3.300)
Now while this screen is there???
Press 1004 on the remote control
A new menu will appear
Scroll down to emu and turn it ?ON? (right >) turns it on
Please note the ?EMU? must always be ?ON?
Press EXIT a couple of times to get back
You will now notice that the digivox T will go from 1 ? 100
And all channels will be there.
I done this from memory so I hope that everything is now working for you
And a special THANKS to all the people that helped me
Now from time to time I see that messages posted here MAY GET EDITED so if does im sorry.
Its all explained from other members of this site so give a look about
T
|
|
Advertisement
|
 |
|
|
|
tdtd80
Member
|
8. February 2009 @ 16:37 |
Link to this message
|
|
One more thing,
If you are in doubt, get professional help
1. Picking out what you need
2. Installing aerial and AC Converters
Messing with electricity is DANGEROUS
and PLEASE note that look about for prices when buying things
I am not trying to get you to buy from the above sites
And im only TRYING TO HELP and i dont hold any responibility for anything going wrong with boxes as I said read more about this on this site
T
|
AfterDawn Addict
|
8. February 2009 @ 17:24 |
Link to this message
|
|
the correct cable is null modem cable and all files and loaders and tuts in eamos library on site
there are 2 cables one straight wired =wont work
null modem cable that has a crossover wire for flashing/updating,as most people get wrong cable so cannot update boxes.
This message has been edited since posting. Last time this message was edited on 8. February 2009 @ 17:30
|
|
tdtd80
Member
|
8. February 2009 @ 17:49 |
Link to this message
|
|
TO ALL USERS:
reading MY thread TDTD80 (about the digivox T)
*** if anyone adds more or corrects me ****
it is probably "GOOD" advise so read all comments
im trying to do it step by step
thanks to C (above)
and as i said earlier, its all on this site
so have a good look around
SO the cable you need is a "NULL MODEM CABLE" to connect the digivox T to your computer
T
|
|
tdtd80
Member
|
8. February 2009 @ 17:58 |
Link to this message
|
|
That "NULL MODEM CABLE" must have a CROSSOVER WIRE for flashing
there are 2 so dont get the wrong one
as far as i know it comes with the digivox T
again thanks to C
T
|
|
pssnger57
Suspended permanently
|
17. February 2009 @ 16:14 |
Link to this message
|
|
i have n*l mmds ashbourne,anyone know if i can replace it with digivox t
,my own aerial,and my own converter and cancel....
anyone recommend an aerial to buy if i can
|
AfterDawn Addict
|
17. February 2009 @ 16:35 |
Link to this message
|
Originally posted by pssnger57:
i have n*l mmds ashbourne,anyone know if i can replace it with digivox t
,my own aerial,and my own converter and cancel....
anyone recommend an aerial to buy if i can
no wrong provider c****s mmds uses digivox t boxes as in dvb/t
u need a dvb/c box like digivox xl.
|
|
Jimme
Member
|
23. February 2009 @ 05:10 |
Link to this message
|
Hi,
I'm about to purchase a MMDS ariel, downconverter and power supply. I've used SatAndCable in the past, but now they only stock 18db ariels. I am guessing that a 21db would be better?
I've just looked at the site http://www.bubblesupplies.co.uk but am hesitant to provide my credit card details to a site I've never heard of. Also, I don't know if their products are of a good quality?
Has anyone ordered form this site and used their equipment? Thanks
|
|
tdtd80
Member
|
23. February 2009 @ 08:51 |
Link to this message
|
|
i bought a digivox T a couple of weeks ago from them...
i had no problems
but i was paying in Euros for
2 x boxes
2 x aerials
2 x downconverters
and when i went to pay the total was ?292.00
then it went to stelling(£)on the next page of the site
it was £269
when i checked and concerted it to euros its came up as ?305
and when i got my bill it was ?305 too
so the best thing to do is pay by PAYPAL if you feel doubtful
as for the box itself its working away fine
i have all the channels
with no problems
fingers crossed
T
|
|
yammagamm
Member
|
23. February 2009 @ 17:41 |
Link to this message
|
|
jimme.18 db gain should be perfect as downconverter also has a gain. as far as i see its all 18db aerials used as i drive around country. if i remember right you are around limerick/clare ?
|
|
Jimme
Member
|
24. February 2009 @ 04:50 |
Link to this message
|
|
yammagamm,
went ahead and bought the 21db gain ariel. a little extra gain can't hurt - can it?
i'm in the cork area. my friend had the full mmds system set up and working for the past few years. over the past 2 months the quality has been slowly deteriorating. we've tried to isolate the problem, but no luck. so we're now re-building system from scratch (downconverter, power supply & ariel).
we recon that some growing trees or new building work may be slightly obstructing the signal, so I opted to get a slightly stronger ariel (21db gain). not sure if it will help. will report back in a week or two to let ye know.
thanks
|
|
hynzyem
Newbie
|
24. February 2009 @ 08:20 |
Link to this message
|
|
If chorus are installin ariel etc, wat do i need? do i still need a down converter and all other stuff? or do i jus need to get box and flash it??? all help appreciated
|
|
blissirl
Newbie
|
1. March 2009 @ 05:26 |
Link to this message
|
|
Head is wrecked .
Used to cable sys modems tv boxes n00b to mmds.
Digivox t with v 3.3 firm tried adding channels.bin can see channel lists but no signal.
i am using the [-]+++++ shaped ariel lol (not mesh type with down sampler) i have clear line of sight to airport in cork.
All i get is no signal all the neighbours are pointing in same direction autoscan returns nothing really quickly like 3 secs to scan.
Do i need a better antenna or can i use some kind of db reading device to check i am getting 70db ?
|
|
cuebase
Newbie
|
1. March 2009 @ 06:31 |
Link to this message
|
|
Hi,
and i will have u up and runing in few mins.
John
This message has been edited since posting. Last time this message was edited on 1. March 2009 @ 07:24
|
AfterDawn Addict
|
1. March 2009 @ 06:48 |
Link to this message
|
|
remove ur email address thats a nono u can send a pm to that person by clicking on the head icon on their post,and all the info is here just reading is a help.
|
|
blissirl
Newbie
|
1. March 2009 @ 07:48 |
Link to this message
|
|
got the PM cuebase CHEERS cactkid !
|
|
tipp4liam
Newbie
|
24. April 2009 @ 10:55 |
Link to this message
|
|
Hi, I have the digivox t, and have set up the everything, i think i have flashed correctly as s/w version is v03.30000t 22 dec 2008.
When i go to do a automatic scan no channels appear at all. emu is on, antenna power is on. What am I missing? Thanks
|
|
tdtd80
Member
|
24. April 2009 @ 14:26 |
Link to this message
|
|
assuming that you flashed the box right
go to
MENU..
SYSTEM INFORMATION...
it should say
Model Name Digivox-T
S/W V03-3.000T
Boot Version 01
Date 22.DEC.2008
Only turn on EMU after auto-scan (MENU...SYSTEM INFORMATION...1004)
BUT turn on ANTENNA before SCANNING
if you can bring your box to a friends house to see if its working that would narrow down a lot of things
people are having trouble with the down-converters as well and
is the aerial on the transmitter ???
check all cables for connections too
just some suggestions
what kind of aerial have you ???
i bought the one you put together yourself, i didnt use it but some of my friends had trouble with it
https://www.bubblesupplies.co.uk/categories/Satellite-and-Cable/MMDS-Ariels-%26-Power-Supply%27s/
the above one is the one that people cant get working
i got my hands on a chou*s aerial
T
This message has been edited since posting. Last time this message was edited on 24. April 2009 @ 14:49
|
|
tipp4liam
Newbie
|
24. April 2009 @ 17:23 |
Link to this message
|
Hi tdlt80
Thanks for help....did all that and still no channels being stored or detected.
just checked the software you mentioned and that matches and box was flashed with that s/w.
I wonder is it the aerial or down convertor...am currently using AM-G24 (mmds Ch***s) and with mmds downconvertor with 32db gain as seen on sat&cable plus mmds adaptor model: sc-AD03 18v(powerpack)...whtat type you using?
thanks again for you help
PS the software on the systems info matches the 1 you mention except it S/W V03-3.0000T on tv (extra zero) as supposed to V03-3.000T you state....probably being pedantic here...but you never know!
|
|
tdtd80
Member
|
24. April 2009 @ 19:23 |
Link to this message
|
i left out "0" sorry...
i have this one
...MMDS power supply (for Chorus Ireland / MMDS dish) 24V
FROM...
https://www.bubblesupplies.co.uk/categories/Satellite-and-Cable/MMDS-Ariels-%26-Power-Supply%27s/
you seem to be tryin all the right things
1. position of aerial (is ok)
2. cables (ok)
3. firmware (ok)
4. antenna on (ok)
5. auto scan (ok)
6. EMU on (ok)
the best thing to do is take it to a friends house and just try the box on its own to see if it ok (if you can)
as i was sayin the down-converter was fauty on a friends box
there are selling by the hundreds...
so a very small % will be faulty...
i wrote the thread for people to follow step by step
as i was delighted to get it going myself
im really not sure about aerials and power supplies
i got a chor*s aerial and put it up myself and done the cables too
i was in direct site to the transmitter and after the first go it worked
keep reading the threads and i hope that some-one will add more for you
i hope that you get sorted soon
T
|
|
tipp4liam
Newbie
|
25. April 2009 @ 05:59 |
Link to this message
|
|
Hi tdtd80
Thanks again for the help,
Can I just run this by you to see what you think......
When I first got the Digivox - T, before it was flashed I was able to pick up audio with no picture of the 4 home tv stations r*e 1 & 2 t*3 & t*4 and a few radio stations as well. Does this tell you if the aerial down converter combo is working or not?
Thanks again
|
|
tdtd80
Member
|
25. April 2009 @ 08:41 |
Link to this message
|
|
i was just thinking there
u have an 18v
maby its not strong enough ???
if you buy a 24v in your local shop and its works keep it
if not you can always return it keep the receipt
you said you were picking up some channels just not them all
maby this is the cause
some sites advertise that the box (DIGIVOX t) comes with the "LATEST FIRMWARE" (they flash it)
T
|
|
tipp4liam
Newbie
|
25. April 2009 @ 10:19 |
Link to this message
|
|
Hi tdtd80,
I will try the 24v power supply and let you know what happens.
Thanks
|
|
sceiri
Junior Member
|
30. April 2009 @ 04:09 |
Link to this message
|
|
Will the digivox t work off a n*l mmds aerial or do i need a cho**s one?
Thanks
|
|
Advertisement
|
|
|
Senior Member
|
30. April 2009 @ 06:30 |
Link to this message
|
Digivox T is for Chorus only, will not work with NTL mmds. A eurovox or starview will but most of the channels are gone from NTL now.
Whatever you say, say nothing when you talk about you know what for if you know who might hear you, you know what youll get. Youll be sent off to you know where for you would not know how long. Maybe I could search through the threads so you dont have to ??
|
