Originally posted by piopat:

---

Originally posted by jhammer02:

---

Piopat, can you advise which cccam shall I install on gemini2 5.10 dm800 bl76 sim2.10

---

http://www.worldoffiles.net/link-f-e/e2...z-free-download

---

Originally posted by piopat:

---

Originally posted by Hubabubas:

---

Originally posted by piopat:

---

hammer by default you cant install a cam on Gemini or dreamelite images via the addons ,but you can manually install a cam . that means you can use dream control center to put the cam file into the box .

hubbabubas try the nabilo maxvar v8 image for your box ,ive got that on a few boxes and it works fine . see if you can download it from the links in my signature area .

---

Piopat, i have tried that, no joy, any thing else I can try, thanks.

---

YOU TOLD ME YOU ONLY TRIED NABILO DARKSTAR 11 ,THE MAXVAR V8 IMAGE WORKS PERFECTLY ON MY BOXES SO IM NOT UNDERSTANDING WHY IT WONT WORK ON YOURS UNLESS TEH BOX HAS A FAULT . THERES A DM500 PLI IMAGE (IT COMES WITH CCCAM PRE INSTALLED )IN MY DOWNLOAD LINK TRY THAT , DO A FLASH ERASE BEFORE YOU FLASH THE BOX .

---

Originally posted by Hubabubas:

---

Originally posted by piopat:

---

Originally posted by Hubabubas:

---

Originally posted by piopat:

---

hammer by default you cant install a cam on Gemini or dreamelite images via the addons ,but you can manually install a cam . that means you can use dream control center to put the cam file into the box .

hubbabubas try the nabilo maxvar v8 image for your box ,ive got that on a few boxes and it works fine . see if you can download it from the links in my signature area .

---

Piopat, i have tried that, no joy, any thing else I can try, thanks.

---

YOU TOLD ME YOU ONLY TRIED NABILO DARKSTAR 11 ,THE MAXVAR V8 IMAGE WORKS PERFECTLY ON MY BOXES SO IM NOT UNDERSTANDING WHY IT WONT WORK ON YOURS UNLESS TEH BOX HAS A FAULT . THERES A DM500 PLI IMAGE (IT COMES WITH CCCAM PRE INSTALLED )IN MY DOWNLOAD LINK TRY THAT , DO A FLASH ERASE BEFORE YOU FLASH THE BOX .

---

I have tried V8 several times today,and no joy, I will try the other route, you have suggested,otherwise I think I will get another 800 DB, thanks again

---

Originally posted by jhammer02:

---

Originally posted by piopat:

---

Originally posted by jhammer02:

---

Piopat, can you advise which cccam shall I install on gemini2 5.10 dm800 bl76 sim2.10

---

http://www.worldoffiles.net/link-f-e/e2...z-free-download

---

how do i install this manually?

---

Originally posted by piopat:

---

sorry about that hammer mate you will just have to find that file some where else , just make sure the file is E2 (enigma2 )and suitable for use on Gemini images .

---

Originally posted by piopat:

---

first you need to unzip/unrar the cccam file . do you know how to use dream control center ? if so open dcc (obviously dcc should be setup )and click on ftp , then look in the box on the left for the file called tmp and double click on it to open it .

next look in the box on the right for the cccam file you just unzipped , when you see it click on it one time to highlight it , then look between the boxes and click on the arrow that points left . all being well now if you look in the box on the left the cccam file should be in there , if it is your done so close dcc .

for the next bit go to the addons panel in your box , you should see manual install panel , if so open it and all being well the cccam file will be there , select the file to install it , installation is quick only seconds .

now exit from the addons menu back to the tv channels , then press the blue button , you should see default cam or common interface , press the right button on your remote till default cam is replaced with cccam , when you have cccam stop . now either you press ok to set the cam as your default cam or you will see an option start /restart cam . if you see restart cam select it to start cccam , but if not pressing ok button should work . that's it job done ,you can exit back to tv channels now .

---

Originally posted by piopat:

---

Gemini images have an addons menu all that's disabled is adding cams via the addons panel . mate press blue button (to enter blue panel )and look for addons , when you find addons you should see manual install panel ,after you have sent the cam to the box look in there and you should see cccam .

---

Originally posted by piopat:

---

try this one mate
http://www.dreamboxtool.com/Other-Image...-Multiboot.html

I don't remember if the addons work on that image but if not don't worry you can definitely pop cccam in to it using dcc .

---

Originally posted by piopat:

---

just flash the box first hammer and we can see if the addons allow cams to be installed via the remote , if they do then that's great but if not don't worry
http://www.4shared.com/rar/p8BBbB4Q/DE-...ftcam-ccca.html

---

Originally posted by piopat:

---

mate did you put an up todate satellite.xml file into your box ? I gave you instructions for this some time back . new frequencies are being used for some channels and if your box doesn't have these new frequencies well no amount of scanning will get the missing channels back .

also you say the channel is there but no picture , now as I say that could be as I said above down to the channel moving frequency but if your using a c line it may be that your c line provider has for what ever reason stopped supplying this channel .

so as I said some time back you have only a few options ,
1/ put an up todate satellite.xml file into the box
2/ put up todate bouquets in to your box
3/ manually add any missing frequencies

if your problem is down to a missing frequency or frequencies then you will have to do one of the above 3 options to get the channels back , if you don't the channels wont come back . but as I say it may be that your c line provider has for some reason stopped supplying setanta , so maybe its worth contacting your c line provider to ask him if he can check everything is ok with setanta .

---