|
end of kryptview?
|
|
AfterDawn Addict
3 product reviews
|
23. May 2011 @ 10:25 |
Link to this message
|
|
if they are working for others they will work for all i suggest you get the correct NET ID from your subbed providers box and use that
|
|
Advertisement
|
|
|
|
|
mojo88
Member
|
24. May 2011 @ 07:00 |
Link to this message
|
|
hi guys kv is hut down this morning showing '0000' on diplay no channels working , i ve tried turning on and off reboot router nothing happens, i have had this couple of times now within 2 weeks only way out is normally a full rescan is this normal??
|
AfterDawn Addict
3 product reviews
|
24. May 2011 @ 07:56 |
Link to this message
|
Originally posted by mojo88:
hi guys kv is hut down this morning showing '0000' on diplay no channels working , i ve tried turning on and off reboot router nothing happens, i have had this couple of times now within 2 weeks only way out is normally a full rescan is this normal??
The reason your box is on 0000 is because your power scan is enabled and your incoming cable is not strong enough so when it scans your box it returns no channels
to stop this happening rescan your channels and in the settings turn off the power scan and that will sort your problem
|
|
kev2k
Newbie
|
25. May 2011 @ 01:21 |
Link to this message
|
|
Hi All,
Is anyones kryptview off in the Manchester area?
It came back Saturday night but has gone again.
Cheers
Kev
|
|
gerrard08
Senior Member
|
25. May 2011 @ 06:01 |
Link to this message
|
Originally posted by kev2k:
Hi All,
Is anyones kryptview off in the Manchester area?
It came back Saturday night but has gone again.
Cheers
Kev
must be your box m8, mine is working ere in oldham
|
|
libbo2003
Member
|
25. May 2011 @ 06:03 |
Link to this message
|
|
Had the same problem, I turned of the homeplug for 30 seconds,turned it on and it worked again. Goodluck
|
|
kev2k
Newbie
|
25. May 2011 @ 07:28 |
Link to this message
|
|
Weird im in Oldham too.
Done all the usual shit.
Bounced the router, bridge, bounced the box, factory reset, rescanned etc
Think im going to have to sniff and see if the packets are getting to the box.
Although tested the wireless bridge on the pc and could get to the net.
Cheers
Kev
|
|
gerrard08
Senior Member
|
25. May 2011 @ 09:31 |
Link to this message
|
kev2k....do a factory reset on your box m8, and scan from the main cable feed, without your LAN connected....best of luk
|
|
damasius
Junior Member
|
25. May 2011 @ 14:00 |
Link to this message
|
|
I hope their servers are not where they can be easily busted like last time.
ngd25
|
|
gerrard08
Senior Member
|
25. May 2011 @ 14:03 |
Link to this message
|
Originally posted by damasius:
I hope their servers are not where they can be easily busted like last time.
i dont think it was the servers that got busted, it was the local cards & card readers...i could be wrong
|
|
djldan
Junior Member
|
25. May 2011 @ 14:10 |
Link to this message
|
Originally posted by damasius:
I hope their servers are not where they can be easily busted like last time.
Uranus.
|
|
woodee
Newbie
|
26. May 2011 @ 19:00 |
Link to this message
|
Originally posted by mojo88:
hi guys kv is hut down this morning showing '0000' on diplay no channels working , i ve tried turning on and off reboot router nothing happens, i have had this couple of times now within 2 weeks only way out is normally a full rescan is this normal??
mojo88 do not touch the audio button on the remote control,because when you turn off and then turn the box on again next time you will get the 0000 and have to re scan again, its a fault with the audio button that causes it to do this, trust me.
|
|
mojo88
Member
|
27. May 2011 @ 07:09 |
Link to this message
|
Originally posted by woodee:
Originally posted by mojo88:
hi guys kv is hut down this morning showing '0000' on diplay no channels working , i ve tried turning on and off reboot router nothing happens, i have had this couple of times now within 2 weeks only way out is normally a full rescan is this normal??
mojo88 do not touch the audio button on the remote control,because when you turn off and then turn the box on again next time you will get the 0000 and have to re scan again, its a fault with the audio button that causes it to do this, trust me.
don't understand what do you mean do not touch audio button??this is how it works turn tv off at night leave kv box on through the night ,first thing in the morning turn tv on kv box is showing '0000' need to do rescan nothing else works
|
|
woodee
Newbie
|
27. May 2011 @ 07:38 |
Link to this message
|
Originally posted by mojo88:
Originally posted by woodee:
Originally posted by mojo88:
hi guys kv is hut down this morning showing '0000' on diplay no channels working , i ve tried turning on and off reboot router nothing happens, i have had this couple of times now within 2 weeks only way out is normally a full rescan is this normal??
mojo88 do not touch the audio button on the remote control,because when you turn off and then turn the box on again next time you will get the 0000 and have to re scan again, its a fault with the audio button that causes it to do this, trust me.
don't understand what do you mean do not touch audio button??this is how it works turn tv off at night leave kv box on through the night ,first thing in the morning turn tv on kv box is showing '0000' need to do rescan nothing else works
mojo88 the audio on your remote control if for some reason you press it while you have your box on,Well for some reason when you turn your box off the next time you turn your box on you will get the 0000 and have to rescan again,I found this out this out to my cost,it must be some glitch re the audio button,So don,t ever touch it let me know how you get on.
|
|
djldan
Junior Member
|
27. May 2011 @ 09:09 |
Link to this message
|
Originally posted by woodee:
Originally posted by mojo88:
Originally posted by woodee:
Originally posted by mojo88:
hi guys kv is hut down this morning showing '0000' on diplay no channels working , i ve tried turning on and off reboot router nothing happens, i have had this couple of times now within 2 weeks only way out is normally a full rescan is this normal??
mojo88 do not touch the audio button on the remote control,because when you turn off and then turn the box on again next time you will get the 0000 and have to re scan again, its a fault with the audio button that causes it to do this, trust me.
don't understand what do you mean do not touch audio button??this is how it works turn tv off at night leave kv box on through the night ,first thing in the morning turn tv on kv box is showing '0000' need to do rescan nothing else works
mojo88 the audio on your remote control if for some reason you press it while you have your box on,Well for some reason when you turn your box off the next time you turn your box on you will get the 0000 and have to rescan again,I found this out this out to my cost,it must be some glitch re the audio button,So don,t ever touch it let me know how you get on.
Originally posted by woodee:
Originally posted by mojo88:
Originally posted by woodee:
Originally posted by mojo88:
hi guys kv is hut down this morning showing '0000' on diplay no channels working , i ve tried turning on and off reboot router nothing happens, i have had this couple of times now within 2 weeks only way out is normally a full rescan is this normal??
mojo88 do not touch the audio button on the remote control,because when you turn off and then turn the box on again next time you will get the 0000 and have to re scan again, its a fault with the audio button that causes it to do this, trust me.
don't understand what do you mean do not touch audio button??this is how it works turn tv off at night leave kv box on through the night ,first thing in the morning turn tv on kv box is showing '0000' need to do rescan nothing else works
mojo88 the audio on your remote control if for some reason you press it while you have your box on,Well for some reason when you turn your box off the next time you turn your box on you will get the 0000 and have to rescan again,I found this out this out to my cost,it must be some glitch re the audio button,So don,t ever touch it let me know how you get on.
I tried this out, just like a big kid who is told not to do something by his parents.....and it turns out woodee is spot on.pressing the audio button and then powering off does indeed take you to the installation page when you power back on. (I wonder how many more of you out there will try this out now just to see...lol.)
This message has been edited since posting. Last time this message was edited on 27. May 2011 @ 09:09
|
|
justrick
Junior Member
|
28. May 2011 @ 04:04 |
Link to this message
|
Originally posted by djldan:
Originally posted by woodee:
Originally posted by mojo88:
Originally posted by woodee:
Originally posted by mojo88:
hi guys kv is hut down this morning showing '0000' on diplay no channels working , i ve tried turning on and off reboot router nothing happens, i have had this couple of times now within 2 weeks only way out is normally a full rescan is this normal??
mojo88 do not touch the audio button on the remote control,because when you turn off and then turn the box on again next time you will get the 0000 and have to re scan again, its a fault with the audio button that causes it to do this, trust me.
don't understand what do you mean do not touch audio button??this is how it works turn tv off at night leave kv box on through the night ,first thing in the morning turn tv on kv box is showing '0000' need to do rescan nothing else works
mojo88 the audio on your remote control if for some reason you press it while you have your box on,Well for some reason when you turn your box off the next time you turn your box on you will get the 0000 and have to rescan again,I found this out this out to my cost,it must be some glitch re the audio button,So don,t ever touch it let me know how you get on.
Originally posted by woodee:
Originally posted by mojo88:
Originally posted by woodee:
Originally posted by mojo88:
hi guys kv is hut down this morning showing '0000' on diplay no channels working , i ve tried turning on and off reboot router nothing happens, i have had this couple of times now within 2 weeks only way out is normally a full rescan is this normal??
mojo88 do not touch the audio button on the remote control,because when you turn off and then turn the box on again next time you will get the 0000 and have to re scan again, its a fault with the audio button that causes it to do this, trust me.
don't understand what do you mean do not touch audio button??this is how it works turn tv off at night leave kv box on through the night ,first thing in the morning turn tv on kv box is showing '0000' need to do rescan nothing else works
mojo88 the audio on your remote control if for some reason you press it while you have your box on,Well for some reason when you turn your box off the next time you turn your box on you will get the 0000 and have to rescan again,I found this out this out to my cost,it must be some glitch re the audio button,So don,t ever touch it let me know how you get on.
I tried this out, just like a big kid who is told not to do something by his parents.....and it turns out woodee is spot on.pressing the audio button and then powering off does indeed take you to the installation page when you power back on. (I wonder how many more of you out there will try this out now just to see...lol.)
maybe we should run a sweepstake my moneys on 47 your guess!!!!!
|
|
mojo88
Member
|
28. May 2011 @ 13:56 |
Link to this message
|
|
hi guys box gone '0000' again do i have to rescan or is their any other option and do i have to do a factory default , i ll have to sort favs again again again again....
|
AfterDawn Addict
3 product reviews
|
29. May 2011 @ 09:02 |
Link to this message
|
|
when you do a new scan and after you have all your channels on your box go into the system settings and turn off the power search mode and you wont have that problem .
|
|
mojo88
Member
|
29. May 2011 @ 14:13 |
Link to this message
|
Originally posted by e45:
when you do a new scan and after you have all your channels on your box go into the system settings and turn off the power search mode and you wont have that problem .
i have done that e45 from your last advice does not make any difference
|
AfterDawn Addict
3 product reviews
|
29. May 2011 @ 16:36 |
Link to this message
|
|
There is no other way your box can lose channels unless you have either factory defaulted it or not turned the power search off as that is the only way your box will lose channels
|
|
jimbob678
Junior Member
|
3. June 2011 @ 11:07 |
Link to this message
|
|
Hi.guys just woundering if RUK is comeing back on with the kv boxes cheers
|
|
damasius
Junior Member
|
6. June 2011 @ 08:01 |
Link to this message
|
Gents
My A750 icconector keeps droping the internet connection. All lights will go off except the power light. Is this a problem with my internet or is it a possible fault with the icconector. When this happens the box stops working for a few seconds then cmes back. Reaaly anoying me now.
ngd25
|
AfterDawn Addict
3 product reviews
|
6. June 2011 @ 09:02 |
Link to this message
|
|
sounds like your internet connection is being dropped and coming back on, are the lights on the router going red or blinking???
|
|
damasius
Junior Member
|
6. June 2011 @ 09:53 |
Link to this message
|
Originally posted by MICKAH:
sounds like your internet connection is being dropped and coming back on, are the lights on the router going red or blinking???
I have an A780 in the seating room connected to a router and it is working ok. The A750 is in a bedroom connected via a powergrid 9020 homeplug. I know the inmternet connection is being dropped. Just trying to figure out if it the icconector or my set up that is the issue.
ngd25
|
|
Advertisement
|
|
|
AfterDawn Addict
3 product reviews
|
6. June 2011 @ 11:30 |
Link to this message
|
|
I would say its your set up and not the iconnect, check your homeplugs
|
