|
STARVIEW NEW FIRMWARE
|
|
|
gamlin25
Junior Member
|
24. May 2011 @ 10:56 |
Link to this message
|
|
can anyone else confirm that this is true?
|
|
Advertisement
|
|
|
|
|
gamlin25
Junior Member
|
24. May 2011 @ 11:20 |
Link to this message
|
|
now its working lol, had to leave it on the channel for a while hooray keep up the good work !!!
|
|
dave0763
Junior Member
|
24. May 2011 @ 11:46 |
Link to this message
|
Originally posted by gamlin25:
ive followed the steps and still not got all movie channels or music channels so its not working down here in bristol. what area are you in david0763?
glasgow still on m8
|
|
gamlin25
Junior Member
|
24. May 2011 @ 11:50 |
Link to this message
|
|
its still working here in bristol mate hopefully this is a sign of things to come!!!!!
|
Junior Member
|
24. May 2011 @ 18:01 |
Link to this message
|
Alright lads, bit of help if ya could please. Trying to sort out SV6 for a mate, been at it for a few hours now to no avail. This is my first bash at an SV6, was familier with the older SV's but switched to KV once the new NAG rolled out. Followed all the tutorials etc, put 'theshowmustgoon2.12' via usb, factory reset and scan (have scanned with LAN cable in & out). Cables are fine pressed 1819 on SS1, tried resetting router box off for 2 mins etc, all prem channels say 'scrambled'. Read somewhere I have to make sure it's on U-Stream through network in options. Is this correct as when I go into network there is only 2 choices, IP setup & SW download.
PS - Don't know how long he's had this box, is it goosed if it's over 12 months or am I off the mark there?
Cheers
|
|
dave0763
Junior Member
|
25. May 2011 @ 04:15 |
Link to this message
|
sw download i have sv 6 and its workin fine m8Originally posted by j1mmyb:
Alright lads, bit of help if ya could please. Trying to sort out SV6 for a mate, been at it for a few hours now to no avail. This is my first bash at an SV6, was familier with the older SV's but switched to KV once the new NAG rolled out. Followed all the tutorials etc, put 'theshowmustgoon2.12' via usb, factory reset and scan (have scanned with LAN cable in & out). Cables are fine pressed 1819 on SS1, tried resetting router box off for 2 mins etc, all prem channels say 'scrambled'. Read somewhere I have to make sure it's on U-Stream through network in options. Is this correct as when I go into network there is only 2 choices, IP setup & SW download.
PS - Don't know how long he's had this box, is it goosed if it's over 12 months or am I off the mark there?
Cheers
i have sv6 and its going ok sw download is the option ur lookin for
|
|
spudorang
Junior Member
|
25. May 2011 @ 05:45 |
Link to this message
|
|
box should be fine
later flashes remove the need to set ustream etc
go into network settings/ip and scroll to bottom and click apply, that will
zero them out. Wait 10 secs and it should refresh.
If it's picking up these then network should be ok.
exit, go to sly 1, press 1819 on remote and it should say enabled.
leave on that channel for a few minutes and it should come back on
pressing centre button on remote should show connected at bottom of telly if all ok.
If I have an issue I usually reboot the box as well as modem.
PS, I never bother factory resetting and never have had a problem as I hate
re deleting all the garbage.
|
|
badboy44
Junior Member
|
25. May 2011 @ 06:03 |
Link to this message
|
hi guys i am gettin stressed here! i have a starview 7 ,have loaded the showmustgoon firmware and gone through the installation as its written but still no luck, i have a starview 7 already which i got workin about 2 months ago and have no such problems with that one. was wondering if i was forgeting to do something or missing out anything. any tips or a readu up would be appreiciated guys, by the way when loading the software can u load it on sw upgrade or boot loader upgrade or should i try both if one doesnt work?
|
Junior Member
|
25. May 2011 @ 07:23 |
Link to this message
|
Originally posted by spudorang:
box should be fine
later flashes remove the need to set ustream etc
go into network settings/ip and scroll to bottom and click apply, that will
zero them out. Wait 10 secs and it should refresh.
If it's picking up these then network should be ok.
exit, go to sly 1, press 1819 on remote and it should say enabled.
leave on that channel for a few minutes and it should come back on
pressing centre button on remote should show connected at bottom of telly if all ok.
If I have an issue I usually reboot the box as well as modem.
PS, I never bother factory resetting and never have had a problem as I hate
re deleting all the garbage.
Nice one, will have a go tonight when I get home. It was picking up the IP address etc but it does say 'not connected' in bottom right when on SS1. Will have a bash and be in touch. Thanks
|
Junior Member
|
25. May 2011 @ 10:57 |
Link to this message
|
Guys I need help.
I installed the new firmware and search for the channels, enabled it using 1819.
It's picking all the IP settings s but no channels work except for free ones.
Are there anything that I am missing?
It says Not Connected at the bottom.
|
|
dave0763
Junior Member
|
25. May 2011 @ 11:55 |
Link to this message
|
u gettin gold watch sky 1 Originally posted by KAIMKHANI:
Hi Guys...
144 Channels are working now in my box will pass list later today..
Also intresting to see that these channels are only working if the box is flashed with latest firmware the old firmware is only giving 84 channels so i would advise that you all should use the last firmware to get all of these 144 channels...
|
|
dave0763
Junior Member
|
25. May 2011 @ 12:57 |
Link to this message
|
Originally posted by KAIMKHANI:
Hi Guys... As promised this is the list of working channels
1 Dave
2 Eden
3 Alibi
4 Good Food
5 Adult Channel
6 Yesterday
7 Home
8 TV5
9 Animal Planet
10 Travel Living
11 Discovery Ch1
12 Discovery Ch2
13 Home Health
14 DisoveryHistory
15 Disc realtime
16 DiscoveryScienc
17 Discovery Turbo
18 Quest
19 MTV Hits
20 MTV Base
21 MTV Dance
22 MTV Hits
23 Crime & Investi
24 VH1
25 Disney XD
26 Viva
27 MTV ROCKS
28 UK Swingers Nig
29 Motors TV
30 Xplicit XXX Night
31 Sky Sports 2
32 Nick Replay
33 Nicktoons TV
34 Nickelodeon
35 Disney Cinemagic
36 Disney Channel
37 Disney Channel +
38 playhouse Disney
39 movies24
40 movies24 +
41 Speed auction t
42 Playbly TV Night
43 sky action&adventure
44 sky classics
45 sky comedy
46 sky drama & romance
47 sky family
48 sky indie
49 sky scfi horror
50 Colors
51 horror channel
52 zee punjabi
53 zee cinema
54 zee tv
55 Challenge+1
56 Sky livingit + 1
57 Challenge
58 sky living
59 sky living+1
60 sky livingit
61 Sky living Love
62 Tini Pop
63 true movies 1
64 Alibi+1
65 Dave ja vu
66 GOLD+1
67 Good Food+1
68 Really
69 Home+1
70 Watch+1
71 Comedy Central
72 British Eurosport
73 Universal Channel
74 Sky Sport News
75 Boomerang +1
76 Sky Arts2
77 Cartoon Network1
78 Cartoon Network2
79 CNN International
80 Kerrang
81 Magic
82 Sky Sports 4
83 Smash Hits
84 4Music
85 Sky Arts2
86 Bid TV
87 QVC
88 Adult Channel N
89 British Eurosp1
90 E! Entertainmen
91 Televis X Night
92 Nat Geo Wild
93 Comedy Central
94 Turner Classic
95 CITY
96 ITV2
97 ITV4
98 Syfy + 1
99 The Community
100 Kiss
101 Q
102 Pick TV
103 Sky 2
104 The Box
105 Television X
106 Playboy
107 RedhotAmature N
108 E4
109 E4+1
110 More 4
111 film4
112 film4+1
113 Extreme sports
114 Views Wives N
115 My Ex Girlfriend
116 Gems TV
117 Jewellery Maker
118 University Channel
119 Syfy
120 God channel
121 Ary digital
122 Comedy Central
123 CBS Reality
124 Espn
125 Espn classic
126 ITV3
127 Liverpoolfc tv
128 Espn america
129 Euronews
130 Best Direct
131 max
132 sony ent tv asia
133 star news
134 star plus
135 Sky Sports 3
136 FX
137 Sky Sports 1
138 b4u movies
139 b4u music
140 5*+1
141 5 USA+1
142 Sky news
143 Bio
144 HISTORY
145 sky crime&thriller
146 sky modern
147 sky premiere 1hr
148 sky premiere
149 Baby TV
150 True Entertainment
thoese extra channel come on today m8
|
Junior Member
|
25. May 2011 @ 14:43 |
Link to this message
|
Originally posted by spudorang:
box should be fine
later flashes remove the need to set ustream etc
go into network settings/ip and scroll to bottom and click apply, that will
zero them out. Wait 10 secs and it should refresh.
If it's picking up these then network should be ok.
exit, go to sly 1, press 1819 on remote and it should say enabled.
leave on that channel for a few minutes and it should come back on
pressing centre button on remote should show connected at bottom of telly if all ok.
If I have an issue I usually reboot the box as well as modem.
PS, I never bother factory resetting and never have had a problem as I hate
re deleting all the garbage.
Had a stab at that mate, zero'd out all the addresses & it kicked back in again. Still say's not connected in the bottom right of the screen. If i try & do s/w update the 2 bars display on the screen but they don't fill up, they just vanish. I think modem & everything is ok coz as soon as i plug the Kryptview in everything is sound. How do i know if the firmware has loaded on correctly, is there a screen that tells me whats flashed on the box? When i downloaded 'theshowmustgoon2.12' its just a 'white sheet' that i save to my desktop then transfer onto the usb stick. It also says unknown file, should it have a specific file type? Sorry if there's a few questions there just trying to get to the bottom of it. Cheers, jb
|
|
spudorang
Junior Member
|
25. May 2011 @ 15:04 |
Link to this message
|
Your pc wont recognise it because it does not have an association with it, just ignore that and put onto pendrive.
Browse to usb on stb and upgrade, if successful it will say so and say rebooting in 3 seconds.
Go to sly sports 1, select 1819 (enable) and wait around a minute and it should be ok
I also find occasionally that switching off via button at back helps it find it's brains. Not a bad idea to reboot modem/wireless router also
To check if update ok do the following.
menu
utility
system info
should show 2.12
Originally posted by j1mmyb:
Originally posted by spudorang:
box should be fine
later flashes remove the need to set ustream etc
go into network settings/ip and scroll to bottom and click apply, that will
zero them out. Wait 10 secs and it should refresh.
If it's picking up these then network should be ok.
exit, go to sly 1, press 1819 on remote and it should say enabled.
leave on that channel for a few minutes and it should come back on
pressing centre button on remote should show connected at bottom of telly if all ok.
If I have an issue I usually reboot the box as well as modem.
PS, I never bother factory resetting and never have had a problem as I hate
re deleting all the garbage.
Had a stab at that mate, zero'd out all the addresses & it kicked back in again. Still say's not connected in the bottom right of the screen. If i try & do s/w update the 2 bars display on the screen but they don't fill up, they just vanish. I think modem & everything is ok coz as soon as i plug the Kryptview in everything is sound. How do i know if the firmware has loaded on correctly, is there a screen that tells me whats flashed on the box? When i downloaded 'theshowmustgoon2.12' its just a 'white sheet' that i save to my desktop then transfer onto the usb stick. It also says unknown file, should it have a specific file type? Sorry if there's a few questions there just trying to get to the bottom of it. Cheers, jb
spud
This message has been edited since posting. Last time this message was edited on 25. May 2011 @ 15:06
|
Junior Member
|
25. May 2011 @ 15:15 |
Link to this message
|
|
Tried all that mate & still says not connected. Just gonna give the lad it back and stick my KV back in. Thanks for all your help, if anything does come of it i'll let ya know. Thanks
|
|
chrislfc
Newbie
|
25. May 2011 @ 15:53 |
Link to this message
|
|
i have put new softwere on box ip add is working fine my modem is working fine but i am still getting not connected please help me am in liverpoolany idear y this is
|
|
badboy44
Junior Member
|
25. May 2011 @ 16:26 |
Link to this message
|
seems like alot of people are getting the not connected info on the starview boxes after putting new firmware on and goin through the installation process, what are we doin wrong? any ideas guys? any help would be appreciated please
can we have a step by step from start to finish of what we have to do guys cheers
|
|
spudorang
Junior Member
|
25. May 2011 @ 16:43 |
Link to this message
|
Sorry I could not help more
Strange one that, usually rebooting etc get's it working again.
Seems you are not alone in this.
Originally posted by j1mmyb:
Tried all that mate & still says not connected. Just gonna give the lad it back and stick my KV back in. Thanks for all your help, if anything does come of it i'll let ya know. Thanks
spud
|
|
welwyn
Member
|
25. May 2011 @ 17:54 |
Link to this message
|
|
try turning box of from the switch on the back of the box leave of for 30 seconds turn switch back on should connect
|
|
spudorang
Junior Member
|
26. May 2011 @ 04:14 |
Link to this message
|
Originally posted by welwyn:
try turning box of from the switch on the back of the box leave of for 30 seconds turn switch back on should connect
Yes that's what I have advised in a couple of reply's above
I believe he has done this already though
spud
|
|
doggie8
Junior Member
|
26. May 2011 @ 05:11 |
Link to this message
|
Follow link to the new firmware, D/load it straight to your usb stick.
1: Remove Ethernet cable from sv
2: Put usb stick in box and go to usb in menu.
3: Load the new showmustgoon 2 firmware using [s/w upgrade].
4: After the sv has rebooted, Reset the sv to Factory Default
5: Scan for channels from main feed, do not change any settings(do not connect LAN yet)
6: Connect Ethernet/LAN to sv (give it 30 seconds)
7: Go to a encrypted channel like sly sports 1, press 1819 on Remote, should say enable
8: if after 2 mins, channels dont work, then turn off sv at the back, then after 2 mins turn on again
This message has been edited since posting. Last time this message was edited on 26. May 2011 @ 05:12
|
Junior Member
|
26. May 2011 @ 06:31 |
Link to this message
|
|
Spud, like you said it's a bit weird actually, as I say, tried all that and still 'not connected'. Kryptview works fine so connection must be there. The only thing I can think is that my modem is a modem/wireless router in one. As I say works fine with the Kryptview but not with the SV. Anyone else running a SV successfully with an all in one modem? Doggie8, cheers for that, followed your script before but I dont think this box likes me!! Will have another go later. Will let ya's know if I suss it.
This message has been edited since posting. Last time this message was edited on 26. May 2011 @ 06:36
|
Junior Member
|
26. May 2011 @ 07:42 |
Link to this message
|
|
Very helpfull info, cheers fella
|
|
gerrard08
Senior Member
|
26. May 2011 @ 09:20 |
Link to this message
|
|
Excellent stuff KAIMKHANI....cheers
|
|
Advertisement
|
|
|
|
eileen59
Newbie
|
26. May 2011 @ 11:38 |
Link to this message
|
Originally posted by KAIMKHANI:
Guys...something very important for the people who are haveing this not connected problem
Please understand that the boxes which were working with Showmustgoon V 1 will only work with version2 if you have box which was on carling and you havent updated with showmustgoon V1 will not work as the server is locked now and any box which was not re registerd in last 2 months with showmustgoon file will not work untill you contact your supplier and he will get some details of your box and pass to the supplier in Korea and after verifying that this box is the one sold by supplier and not from any copy guys they will fired them up... any new box coming from supplier will work ok with these files as they have incorporated the required security feature in the box with them..
pls check if your box was on showmustgon V1 in that case it will take V2 but if they were never connected in last 2 months speek to your supplier.....
good to know, many thanks
|
