|
|
|
DVD Shrink And Nero Keeps Failing Burn Process
|
|
|
Liverzeb
Newbie
|
12. June 2005 @ 03:21 |
Link to this message
|
Hi everyone - newbie here. Just thought I'd add my story here. I was a happy DVD SHRINK/NERO COMBO burner until one day it just stopped working - i of course blamed my Imation and TDK disks and Nero (although some of these worked) and anything else I could think of. Went on forum and got plenty of advice - upgrade firmware, use better media, Shrink more to avoid burning to edges etc. However, none of these changed a goddamned thing - there was one piece of advice that did work and I'm sad to say I ignored it at first because I though it was superfluous. However, after trying everything else I gave it a go - all it is is dedicate your computer to burning - no internet connection on, no programs running - and Whooppee - DO! - 2 burns attempted - 2 burns successsful - both on the much maligned Imation spindle disks. Just thought i'd mention this as it might be a good start for people before they change firmware, software, hardware etc.
|
|
Advertisement
|
 |
|
|
|
acets
Newbie
|
24. June 2005 @ 05:02 |
Link to this message
|
|
I am back! Last month I got on this forum and was having some PCA errors; now, I've started to get Communication Errors. I can't get a log because my computer freezes after the burn fails so sorry I can't post it. I can burn CD's fine, but when I try to burn IMG onto DVD I get the "cannot write to sectors ###-###: Communication error" or something to that extent. I've made 150+ DVD's without much error but now I can't seem to get this to work. Can anyone help?
|
Moderator
|
24. June 2005 @ 05:23 |
Link to this message
|
|
@acets - hi. sure you can post the last section of log as it's appended to by all burns.. it's c:\program files\ahead\nero\nerohistory.log
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
|
acets
Newbie
|
24. June 2005 @ 05:53 |
Link to this message
|
Oh, I didn't even know that existed. Thanks for info.
====== *** Nero-Burning Rom, History File *** ======
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 4/3/2005 6:55:27 AM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM
Nero version: 6.6.0.2
Recorder: <SONY DVD RW DRU-720A> Version: JY03 - HA 1 TA 0 - 6.6.0.2
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <Generic DVD-ROM >Version: 1.0 - HA 3 TA 0 - 6.6.0.2
Adapter driver: <d347prt> HA 3
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD2000JB-00FUA0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : IBM-DTLA-307075 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SONY DVD RW DRU-720A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 2 ID 0 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
SONY DVD RW DRU-720A E: CDRom0
AXV CD/DVD-ROM F: CDRom1
Generic DVD-ROM H: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1047788kB)
Free physical memory: 454MB (465476kB)
Memory in use : 55 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
23.6.2005
Burn DVD Image
5:28:06 PM #1 Text 0 File Reader.cpp, Line 127
Reader running
5:28:06 PM #2 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DRU-720A running
5:28:06 PM #3 Text 0 File Burncd.cpp, Line 3117
Turn on Disc-at-once, using DVD media
5:28:06 PM #4 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1020010 (226:40.10, 1992MB)
5:28:06 PM #5 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)
5:28:06 PM #6 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: SONY DVD RW DRU-720A, Media type: DVD+R
Disc Manufacturer ID: MCC, Media Type ID: 003, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3
5:28:06 PM #7 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================
5:28:06 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 844
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 1020011 (1020011) = #1020011/226:40.11
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1020011 blocks [SONY DVD RW DRU-720A]
--------------------------------------------------------------
5:28:06 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 1047
Prepare recorder [SONY DVD RW DRU-720A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2088982528, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
1020011 | lead-out | 1 | 0x00 | 0x41
5:28:06 PM #10 Phase 28 File dlgbrnst.cpp, Line 1832
Speed measurement started
5:28:06 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 2568
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
5:28:50 PM #12 Text 0 File WriterStatus.cpp, Line 116
<SONY DVD RW DRU-720A > start writing Lead-Out at LBA 1020011 (F906Bh), lenght 0 blocks
5:28:50 PM #13 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
5:28:50 PM #14 Phase 29 File dlgbrnst.cpp, Line 1781
Speed measurement completed: 35x (48,338 KB/s)
5:28:50 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 6x (8,310 KB/s)
5:28:50 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2568
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
5:28:50 PM #17 Text 0 File Cdrdrv.cpp, Line 8310
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: MCC.....
Media type ID: 003
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 4D 43 43 00 00 - 00 00 00 30 30 33 00 38 ...MCC.....003.8
23 54 37 12 02 42 6E 02 - A8 6B 15 15 0B 0B 08 08 #T7..Bn..k......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
5:28:50 PM #18 CDR -1207 File DVDR.cpp, Line 4780
Book Type automatically set to: Current recorder setting
5:28:50 PM #19 Text 0 File DVDPlusRW.cpp, Line 606
Start write address at LBA 0
DVD high compatibility mode: No
5:30:08 PM #20 SCSI -1024 File Cdrdrv.cpp, Line 1431
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x042B0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x08
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x11 0x20 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x08 0x03
5:30:08 PM #21 CDR -1024 File Writer.cpp, Line 311
Communication failure
5:30:08 PM #22 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
5:30:09 PM #23 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
5:30:25 PM #24 Text 0 File DVDR.cpp, Line 5291
Drive: SONY DVD RW DRU-720A
Book Type request: DVD+R
Changing the Book Type was finished successfully, return code 0
5:30:25 PM #25 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 6x (8,310 KB/s)
Existing drivers:
File 'Drivers\CDR4_2K.SYS': Ver=2.5 (087), size=52720 bytes, created 1/18/2000 12:08:28 AM
File 'Drivers\CDRALW2K.SYS': Ver=1.00 (1030), size=22585 bytes, created 5/3/2005 7:35:00 PM
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 4/3/2005 6:55:27 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/11/2005 5:28:13 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=?.?.?.?, size=95360 bytes, created 8/4/2004 12:59:42 AM (Adapter driver for rec)
File 'Drivers\d347prt.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 8/22/2004 4:31:48 PM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
Moderator
|
24. June 2005 @ 09:14 |
Link to this message
|
@acets - i knew we'd see you again as you gave the impression you didn't want to address the things we'd pointed out last month.
Quote:
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 4/3/2005 6:55:27 AM
- install an up to date ASPI layer - http://www.afterdawn.com/software/cdr_software/cdr_tools/aspi.cfm
Quote:
Nero version: 6.6.0.2
- i was using 6.6.0.0 for a long time, and no Nero-related problems at all. (6.6.0.0. isn't the cause of your problem), though it might be worth you updating to latest - 6.6.0.14
Quote:
Recorder: <SONY DVD RW DRU-720A> Version: JY03
- firmware is up to date
Quote:
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1020010 (226:40.10, 1992MB)
- this burn isn't close to edge of disc; but if you use DVD Shrink, make sure to set target size to 4300MB, in preferences so no future movies go to outer edge of disc
Quote:
Disc Manufacturer ID: MCC, Media Type ID: 003
- they would appear to be Verbatim.
Quote:
Speed measurement completed: 35x (48,338 KB/s)
- what the hell is going on there!
Quote:
Burn process started at 6x (8,310 KB/s)
- slow it down, try 4x
Quote:
DVD high compatibility mode: No
- i personally have this set to Yes... your mileage may vary on this one. I mentioned this last month
Quote:
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
- splat!
Quote:
Communication failure
- splat! - here's some clues, some of which were mentioned last month and again today - "http://ww2.nero.com/enu/FAQs_Products_NeroBurningROM_Error-Messag... "
Quote:
Existing drivers:
File 'Drivers\CDR4_2K.SYS': Ver=2.5 (087), size=52720 bytes, created 1/18/2000 12:08:28 AM
File 'Drivers\CDRALW2K.SYS': Ver=1.00 (1030), size=22585 bytes, created 5/3/2005 7:35:00 PM
- you still have Packet Writing software installed from the last logfile you posted last month.
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
This message has been edited since posting. Last time this message was edited on 24. June 2005 @ 09:16
|
|
acets
Newbie
|
24. June 2005 @ 11:12 |
Link to this message
|
Quote:
@acets - i knew we'd see you again as you gave the impression you didn't want to address the things we'd pointed out last month.
The reason why I hadn't "addressed" the issues I had before was because I had fixed my problem by simply giving my burner its own power connector. Since then I have made flawless copies and had thought I was in the clear, so to speak.
Quote:
Quote:Communication failure
- splat! - here's some clues, some of which were mentioned last month and again today - "http://ww2.nero.com/enu/FAQs_Products_NeroBurningROM_Error-Messag... "
A few of these seem to be plausible explanations and I am going to look into a lot of them, particularly the IDE controller card driver being out of date.
Quote:
Quote:Existing drivers:
File 'Drivers\CDR4_2K.SYS': Ver=2.5 (087), size=52720 bytes, created 1/18/2000 12:08:28 AM
File 'Drivers\CDRALW2K.SYS': Ver=1.00 (1030), size=22585 bytes, created 5/3/2005 7:35:00 PM
- you still have Packet Writing software installed from the last logfile you posted last month.
I did have Roxio and DirectCD installed but I uninstalled it a while ago. Right now I only use Nero and Dvd Decrypter. How would I go about getting rid of the extra stuff? I am going to look into the IDE drivers and so forth and will be back.
Sorry if I seemed rude when I last posted- I suspect that was your implication in the beginning, if not, it is a misunderstanding- but I had fixed my problem quickly and thought I didn't need any more help. How you and all the other here help people that are having problems is quite noble and obviously helpful; most companies are slow at responding to customers and this place is a god-send for them (and myself, in this current situation.)
This message has been edited since posting. Last time this message was edited on 24. June 2005 @ 11:13
|
Moderator
|
24. June 2005 @ 11:25 |
Link to this message
|
|
oops i didn't mean offense when i answered. re-reading i can see why you'd have thought i was being funny. sorry, that wasn't my intention. let me see what i can see....
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
Moderator
|
24. June 2005 @ 11:34 |
Link to this message
|
|
sorry about the refernces to 'last month'. I am very anal when it comes to detail sometimes, helps me track things by being very exact, that's all.
Roxio and direct cd are indeed what installs those drivers. hmmm... i'd investigate the other link i sent you, then worry about the packet writing stuff last
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
acets
Newbie
|
24. June 2005 @ 12:25 |
Link to this message
|
|
I am still trying to get drivers for my motherboard but the ASUS site is REALLY slow. I keep getting load errors because of their site connectivity. No problem with the "Last month" event (and that is how it shall be known- the "Last month" event.)
|
|
chaseme5
Junior Member
|
17. July 2005 @ 22:09 |
Link to this message
|
|
I noticed in your error message that disk type was unknown. I believe this might be a problem. Use media that are known to work with this type of software.
|
|
denzemen
Suspended due to non-functional email address
|
18. July 2005 @ 07:29 |
Link to this message
|
hi i'm having problems burning with Nero when i use it through dvdshrink. if i choose dvd burner as last output most of the times burning stops before 100%, if i do the same process saving in hd folder and then burning separately no problem.
Any solution to this puzzle?
|
|
ScubaPete
AfterDawn Addict
|
20. July 2005 @ 20:37 |
Link to this message
|
Hi denzemen, welcome to aD,
It sounds like a media issue. You are probably using a poorer quality and you're burning too close to the discs edge. That's why you get almost to the end and what's happening is, your disc has run out of a good dye application. Many times, in poorer media, the dye toward the discs outer edge is uneven OR sometimes, even absent :(
Reducing your DVD Target size to "Custom" and setting the size around 4200MB will give you plenty of room and a good dye base. Or, if you're using good media like Verbatim's or Taiyo Yuden's you can set the size to "Custom" ~ 4360MB.
When using Nero, you should be using either Nero Burning ROM or Recode2. Where it says "DVD-5", click the "Pull-down" arrow and change the DVD-5 to "Custom" and type in your size in MB. You cannot go wrong by setting it at 4200MB.
NOTE: To avoid other annoying errors, no matter what discs you're burning on, always burn no faster than 4X. Controlled burning is a magic solution to ensure a good backup.
As for quality, A good grade, Hi-quality media is needed for DVD reproduction ! Phillips, Fuji +R's (not the -R's UNLESS they are made in Japan), Sony, TDK, HP, "Branded" RiData Go3's, Maxell +R (not the -R's as they cannot be trusted), Sony, Ritek G04 and G05's (not the 01's or the 02's), Verbatim - DataLife, Verbatim - DataLife Plus and media boasting "Advanced Metal AZO" BUT, it must say "Advanced METAL AZO", this indicates a superior dye and dye application on a good composite disc.As a general rule, the majority of discs manufactured by Taiyo Yuden, Mitsubishi, RICOH and most Ritek are good bets. Look closely at those discs we recommended, you will see some dye types not listed by us. Those are poor risks even though the same company makes them. Prices online from SuperMediaStore.com, Meritline.com OR Newegg.com have gotten Ritek G04 starting at about a $ .36 (USD) a disc - and just recently, a "Super Sale" had 100 Taiyo Yuden discs, 4X for $.25(USD)ea. PLUS they all have an excellent return policy. As a passing note, when buying Verbatim's, they come with a lifetime warrantee. Return them with your sales slip [I]OR[/I] register receipt and a new one will be shipped to replace it.
For the best online media stores to shop, try -
Mertline.com
http://meritline.com/
Newegg.com
http://www.newegg.com/app/ViewProductDesc.asp?description=17-132-...
And,
Supermediastore.com
http://www.supermediastore.com/media1.html
That should straighten you out,
Cheers,
Pete
|
|
andcom
Newbie
|
4. August 2005 @ 00:02 |
Link to this message
|
Thank you for the advice contained in this thread, although I didn't report my problem here, the advice has helped me solve it. Incase it might help someone else this was my problem and solution:
I bought a spindle of Maxell MXL RG03 (DVD-R), and they just refused to burn on my Liteon LDW-851s drive, although other +R disks were burning fine. (I'm using Nero and DVDD) I'd read these were good disks, so persisted.
I went down the route of a software conflict, so I unninstalled an old version of Easy dvd and InCD (that came from the Nero site), and restarted my writer.
I don't know which bit did it, but the disk are burning fine now.
Thanks
|
|
jkrzwld
Newbie
|
5. August 2005 @ 16:38 |
Link to this message
|
i want to ask a question (newbie in this forum). What is the best media to use to burn movies. I was getting some results with TDK and I know memorex is crap, but which one is the best? I have a 12x DVD burner that lately has been giving me coasters. I use DVD Shrink, then Nero or DVD Shrink then DVD Decrypter to burn an ISO image. Please help, I am getting "cyclic redundacy check" error and the long one that's on here.
jokerZwild
|
|
ScubaPete
AfterDawn Addict
|
7. August 2005 @ 16:04 |
Link to this message
|
Hi jkrzwld,
There are several discs that are excellent to use but none that I would use burning at 12X.I recommend burning at 4X no matter what you're using. Burning Video is hard work and trying to go too fast will get you coasters no matter what.
Eliminating errors and going for the "Best burn" ~ Tips ~
When attempting to achieve the best burn, consider reducing that burn speed to the 4X level. Iffin you have a new 16X, DL burner, you'll probably do well at 6X. It is my feeling that 8X and over leads to occasional coasters, even when using top grade stuff such as Taiyo Yuden's OR Verbatim DataLife Plus media.
The second part of the solution is to always use a decent grade media. As for quality, A good grade, Hi-quality media is needed for DVD reproduction ! Phillips, Fuji +R's (not the -R's UNLESS they are made in Japan), Sony, TDK, HP, "Branded" RiData Go3's, Maxell +R (not the -R's as they cannot be trusted), Sony, Ritek G04 and G05's (not the 01's or the 02's), Verbatim - DataLife, Verbatim - DataLife Plus and media boasting "Advanced Metal AZO" BUT, it must say "Advanced METAL AZO", this indicates a superior dye and dye application on a good composite disc.As a general rule, the majority of discs manufactured by Taiyo Yuden, Mitsubishi, RICOH and most Ritek are good bets. Look closely at those discs we recommended, you will see some dye types not listed by us. Those are poor risks even though they are made by the same company. Prices online from SuperMediaStore.com, Meritline.com OR Newegg.com have gotten Ritek G04 starting at about a $ .36 (USD) a disc - and just recently, a "Super Sale" had 100 Taiyo Yuden discs, 4X for $.25(USD)ea. PLUS they all have an excellent return policy. As a passing note, when buying Verbatim's, they come with a lifetime warrantee. Return them with your sales slip [I]OR[/I] register receipt and a new one will be shipped to replace it.
For the best online media stores to shop, try -
Mertline.com
http://meritline.com/
Newegg.com
http://www.newegg.com/app/ViewProductDesc.asp?description=17-132-...
And,
Supermediastore.com
http://www.supermediastore.com/media1.html
Shopping around can prove worthwhile - Staples, as of this date, offered HP+R DVD's (I LQQked them up in MediaMatch and they are made by Mitsubishi) for $18.00 per 50. Verbatim's were on sale $10.00 rebate for a pack of 25, $20.00 (USD) for a pack of 50 AND Taiyo Yuden where on sale with their -R, 4X DVD's for $.25 each (USD) in packs of 100, a fortnight past - Think of it, Taiyo Yuden's for $25 ea. There are sales all the time for the "GREAT" stuff - So you sea, quality isn't always expensive ~
Cheers,
Pete
|
|
Advertisement
|
|
|
|
jkazam
Newbie
|
8. September 2005 @ 15:43 |
Link to this message
|
Hey guys.
Here's my problem.
Over the summer I've been using Lite-On SOHW 1673s external burner i believe. I was using a dell 700m laptop and crappy memorex media with DVD Shrink and Nero.
Every single DVD i burned ~50 of them works.
Now i switched to my desktop. Self made P4 2.3 Ghz 512 Ram with WinXP Pro. And most of the DVDs i made start skipping and freeze towards the mid-end to watching them.
I just plugged the burner into the usb (2.0) ports in the back and updated the firmware.
I switched the size to 4300MB as suggested and will see if that works.
Any other suggestions?
-Jake
|
|
