|
|
|
Unable to burn dvd-r dvd+r discs all of a sudden
|
|
|
koalatech
Newbie
|
1. April 2005 @ 15:01 |
Link to this message
|
|
I was using dvdshrink and nero for some with no problems at all. Then I was unable to write to dvd-r media. I thought it was a problem with shrink/nero compatibility but other dvd burn applications produce write errors too even with data. The secondary IDE channel device 0 (DVD drive) went from DMA to PIO transfer so I uninstalled the devices DVD, IDE and nero. Now I have DMA transfer (Ultra DMA Mode 2) but still no luck. I have tried DVD+R media of a different brand and still errors. The media shouldn't be the problem because it was working 100% for many months. Also DVD+R will not allow simulation under nero, DVD-R is ok. DVD-RW appears to burn ok. CD's burn ok.
here is the nero log for DVD-R media:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 5:35:34 PM
Nero Version: 6.6.0.8
Recorder: <HL-DT-ST DVD-RW GWA-4040N>Version: 1.01 - HA 1 TA 0 - 6.6.0.8
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HL-DT-ST DVD-RW GWA-4040N>Version: 1.01 - HA 1 TA 0 - 6.6.0.8
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : HITACHI_DK23FA-60 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-RW GWA-4040N atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVD-RW GWA-4040 F: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 766MB (784880kB)
Free physical memory: 346MB (355316kB)
Memory in use : 54 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
2.4.2005
Burn DVD Image
10:26:42 AM #1 Text 0 File Reader.cpp, Line 127
Reader running
10:26:42 AM #2 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVD-RW GWA-4040N running
10:26:42 AM #3 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media
10:26:42 AM #4 Text 0 File DlgWaitCD.cpp, Line 259
Last possible write address on media: 2297887 (510:38.37, 4488MB)
Last address to be written: 1743504 (387:26.54, 3405MB)
10:26:42 AM #5 Text 0 File DlgWaitCD.cpp, Line 271
Write in overburning mode: NO (enabled: CD)
10:26:42 AM #6 Text 0 File DlgWaitCD.cpp, Line 2316
Recorder: HL-DT-ST DVD-RW GWA-4040N, Media type: DVD-R
Disc Manufacturer: VDSPMS - AB 01
Disc Application Code: 64, Disc Physical Code: 193
10:26:42 AM #7 Text 0 File DlgWaitCD.cpp, Line 433
>>> Protocol of DlgWaitCD activities: <<<
=========================================
10:26:42 AM #8 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 1743505 (1743505) = #1743505/387:26.55
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1743505 blocks [HL-DT-ST DVD-RW GWA-4040N]
--------------------------------------------------------------
10:26:42 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [HL-DT-ST DVD-RW GWA-4040N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3570698240, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1743505 | lead-out | 1 | 0x41 | 0x00
10:26:42 AM #10 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
10:26:42 AM #11 Text 0 File Burncd.cpp, Line 4040
Cache writing successful.
10:26:42 AM #12 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
10:26:42 AM #13 Phase 32 File dlgbrnst.cpp, Line 1832
Simulation started at 2x (2,770 KB/s)
10:26:42 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
10:26:42 AM #15 Text 0 File DVDR.cpp, Line 2194
Recording mode: Sequential Recording Mode for Multisession
10:26:42 AM #16 Text 0 File Mmc.cpp, Line 21235
Set BUFE: Buffer underrun protection -> ON
10:26:42 AM #17 Text 0 File DVDR.cpp, Line 2340
Start write address at LBA 0
DVD high compatibility mode: Yes
10:26:42 AM #18 Text 0 File Cdrdrv.cpp, Line 8430
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
10:27:00 AM #19 SCSI -1135 File Cdrdrv.cpp, Line 1435
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04B10000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x80
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x0C 0x80
10:27:00 AM #20 CDR -1135 File Writer.cpp, Line 311
Write error
10:27:00 AM #21 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
10:27:01 AM #22 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
10:27:01 AM #23 Text 0 File DVDR.cpp, Line 2603
EndDAO: Last written address was -1
10:27:01 AM #24 Phase 34 File dlgbrnst.cpp, Line 1832
Simulation failed at 2x (2,770 KB/s)
Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 4/08/2004 10:00:00 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
NTI CD&DVD maker does the following:
writing to cache
after about 28 seconds the elapsed time counter stops. After a few minutes the program displays a prompt media error.
here is the log:
========== BEGIN OF LOG ==========
NTI CD & DVD-Maker Version 6.0.1
Start Time: Saturday, April 02, 2005, 10:42:02AM
Processor Architecture: INTEL
Processor Type: INTEL PENTIUM
Processor Level: 6
Microsoft Windows XP version 5.1 Service Pack 2 (Build 2600)
Memory in use: 36%
Total physical memory: 784 MB
Total free physical memory: 500 MB
Total paging file: 1919 MB
Total free paging file: 1645 MB
Total virtual memory: 2097 MB
Total free virtual memory: 1982 MB
CD Layout: Custom DVD
Disc Format: DVD-ROM
Total Data Blocks: 1743355
CD-Recorder: HL-DT-ST DVD-RW GWA-4040N (F:)
Firmware Version: 1.01
Disc Media: DVD-R
Free Disc Blocks: 2297888
Test: Yes
Write Speed: 2x
Write Method: Disc-At-Once
Close Disc: Yes
Leave Session Open: No
Error Code: 1003
CDB: 43 00 00 00 00 00 AA 00 1A 00 00 00
SenseKey:05 ASC:24 ASCQ:00
Finish Time: Saturday, April 02, 2005, 10:44:34AM
========== END OF LOG ==========
Why all of a sudden can't I write to DVD-R or DVD+R media?
Lickily I can simulate using DVD-R media and not have to keep throwing discs in the bin.
My drive does not support X1
I have tried X2 and X4 with no luck.
I have tried to update the DVD drive firmware but it says it's the latest already.
Can anyone help?
|
|
Advertisement
|
 |
|
|
|
DogBomb
Senior Member
|
7. April 2005 @ 08:44 |
Link to this message
|
|
Can you check your ASPI files to see if they're corrupt? With Nero, it's the last tab in InfoTools. Reinstall them using ForceASPI. Otherwise, you could try using XP's Restore feature to go back to a date before you had all these problems. BTW, use Rewritables until you figure out the problem.
This message has been edited since posting. Last time this message was edited on 7. April 2005 @ 08:44
|
Moderator
|
7. April 2005 @ 08:57 |
Link to this message
|
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***This message has been edited since posting. Last time this message was edited on 7. April 2005 @ 08:58
|
|
koalatech
Newbie
|
8. April 2005 @ 04:52 |
Link to this message
|
Nero info tool shows System ASPI not installed.
it also indicates Nero ASPI WNASPI32.DLL 2.0.1.74 October 26, 2004 installed and working properly.
I will look into ForceASPI. and get back to you guys.
Thanks for the help ... greatly appreciated.
|
Moderator
|
8. April 2005 @ 10:30 |
Link to this message
|
@Dogbomb, i didn't notice anything aspi related there, just getting to know what to look for in Nero logs.. i'll have to keep that one in mind..
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
Car.Mike
AfterDawn Addict
|
8. April 2005 @ 13:22 |
Link to this message
|
koalatech ,
Since you are using XP you do not need ASPI as Windows utilizes SPTI. Besides Nero has the ASPI layer there already for you. I have no ASPI layer on my computer except for Nero and have never had a problem.
The Log shows a "Medium error" so use a better grade of Blank media and do as was suggested and use RW's until you get it solved.
The reason you went into PIO as when Windows gets 6 errors it drops the DMA down 1 notch. It goes from DMA 2 >DMA1>PIO4.and then all the way down to PIO 1. More than likely it is a registry conflict that is causing the DMA problems. You might Google for a free registry cleaner and then Clean out your registry of any conflicting files
|
|
koalatech
Newbie
|
10. April 2005 @ 04:44 |
Link to this message
|
I don't suspect the media because I had 100% reliability until a few months ago. I bought good quality dvd+R media just to test and used low write speed X2 and X4 but Nero and NTI are 100% failing. I recently installed CDBurnerXp Pro 3.0. I managed to get it to work on DVD+R media for 3 burns out of about 30 attempts(DVD-R still failed 100%). CDburnerXP doesn't detect a failure when the disc is not written to in my case. In fact it thinks the process was successful. e.g. select write to disc and about 2 seconds later it says burn was successful. One good thing I can keep using the disc because it is still blank. I better go through the registry as suggested. I restored the system back to a restore point prior to the problem but Nero had all kinds of errors. Nero and NTI programs "hang up" and stop responding when burning DVD-R +R. After a period of time they respond and at that point they report "media error". I would expect a real media error just to fail the process and not hang the programs. I suspect DVD-R and +R is causing the drive to stop talking for some reason.
|
Moderator
|
10. April 2005 @ 04:57 |
Link to this message
|
@koalatech - Quote:
I would expect a real media error just to fail the process and not hang the programs.
- if only this was the case. One of the frustrations with DVD burning can be that a burn may well appear to burn successfully, yet upon playback you experience freezing/skipping or other problems. This is usually due to crappy media - what we found you were using with your original log. The fact that you had success with crappy media before unfortunately does not guarantee they will always work for you. The only thing for sure is that crappy media is still crappy media. Maybe one day DVD burning will be as good as CD burning ie any crappy old CD seems to work these days, but that's just not the case with DVDs for most ppl.
Now you say you've used better media since then, it would be good to post that section of log. However it could be a genuine hardware problem, but post your log
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
This message has been edited since posting. Last time this message was edited on 10. April 2005 @ 05:03
|
|
y2005
Newbie
|
10. April 2005 @ 15:58 |
Link to this message
|
Same issue. Brand new machine, not more than two days old with the same error. Thought it was the new Pioneer drive. Then was at my parents place yesterday and my old man told me he just started having problems, and it was also the same error.
We both use different media, different burners (his is a Sony), different OS's (I am XP, his is 2000). The only thing in common is the same versions of Nero and DVDShrink.
Downgraded Nero to older versions on his machine, no luck. Tried a few more dvd's, was able to get one to work. The one that did work didn't need to be recompressed.
Any ideas? Havn't checked ASPI drivers or anything yet.
|
Moderator
|
11. April 2005 @ 04:01 |
Link to this message
|
@y2005, go thru the above steps , then post you log minus serial number (sorry if you already know this!), and let us know what media you're using, though that'll be in the Nero log, as will firmware blah blah blah !!
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
y2005
Newbie
|
11. April 2005 @ 22:05 |
Link to this message
|
|
Creaky, Thanks for the reply. I will confirm all the details of both my machine and my old man's this weekend, then post back.
|
|
my2222
Suspended due to non-functional email address
|
7. May 2005 @ 16:11 |
Link to this message
|
|
Has anyone figure out how to resolve this?? I also have been able to burn to my DVD+R since 04DEC till 2 days ago. Now I can burn the files to DVD+RW and not DVD-R. Tried two different brand of DVD+R. My error messages are slightly different:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.56, size=163910 bytes, created 4/2/2003 6:13:44 AM
Nero API version: 6.0.0.0
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <HL-DT-ST DVD+RW GCA-4040N>Version: 1.17 - HA 1 TA 0 - 6.0.0.0
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : TOSHIBA MK6021GAS atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD+RW GCA-4040N atapi Port 1 ID 0 DMA: Off
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 510MB (523248kB)
Free physical memory: 159MB (163356kB)
Memory in use : 68 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
7.5.2005
NeroAPI
7:14:32 PM #1 Phase 112 File APIProgress.cpp, Line 232
DVD-Video files reallocation started
7:14:32 PM #2 Phase 114 File APIProgress.cpp, Line 232
DVD-Video files reallocation completed (no file modified)
7:14:32 PM #3 Phase 111 File APIProgress.cpp, Line 232
DVD-Video files sorted
7:14:32 PM #4 Text 0 File Reader.cpp, Line 118
Reader running
7:14:32 PM #5 Text 0 File Writer.cpp, Line 127
Writer HL-DT-ST DVD+RW GCA-4040N running
7:14:32 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3814
First writeable address = 0 (0x00000000)
7:14:32 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3814
First writeable address = 0 (0x00000000)
7:14:32 PM #8 Text 0 File Burncd.cpp, Line 3081
Turn on Disc-At-Once, using DVD media
7:15:11 PM #9 Text 0 File DlgWaitCD.cpp, Line 224
Last possible write address on media: 2295103 (510:01.28)
Last address to be written: 2286103 (508:01.28)
7:15:11 PM #10 Text 0 File DlgWaitCD.cpp, Line 229
Write in overburning mode: FALSE
7:15:11 PM #11 Text 0 File DlgWaitCD.cpp, Line 1688
Recorder: HL-DT-ST DVD+RW GCA-4040N, Media type: DVD+R
Disc Manufacturer ID: IS01, Media Type ID: 001, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 1
7:15:11 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 757
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 2286104 (2286104) = #2286104/508:1.29
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286104 blocks [HL-DT-ST DVD+RW GCA-4040N]
--------------------------------------------------------------
7:15:11 PM #13 Text 0 File Burncd.cpp, Line 3318
Recorder and media-info
=======================
Burning to HL-DT-ST DVD+RW GCA-4040N on a DVD+R media
7:15:11 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 910
Prepare recorder HL-DT-ST DVD+RW GCA-4040N for write in cue-sheet-DAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Session Closed, CD fixated
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 387280896
7:15:11 PM #15 Phase 24 File APIProgress.cpp, Line 232
Caching of files started
7:15:11 PM #16 Phase 25 File APIProgress.cpp, Line 232
Caching of files completed
7:15:11 PM #17 Phase 36 File APIProgress.cpp, Line 232
Burn process started at 4x (5,520 KB/s)
7:15:11 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2104
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0
7:15:11 PM #19 Text 0 File Cdrdrv.cpp, Line 7827
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 01 49 53 30 31 00 00 - 00 00 30 30 31 00 38 23 ..IS01....001.8#
54 37 13 02 4A 71 02 90 - 66 16 16 0B 0B 0A 0A 01 T7..Jq..f.......
1C 1E 0B 0C 12 12 01 00 - 00 00 00 00 00 00 00 01 ................
7:15:11 PM #20 Text 0 File DVDPlusRW.cpp, Line 1415
Set Booktype to DVD-ROM (0), set mode 'next writes' (2) on DVD+R media, return: 0 -> OK
7:15:11 PM #21 Text 0 File DVDPlusRW.cpp, Line 513
Start write address at LBA 0
DVD high compatibility mode: Yes
7:25:50 PM #22 SCSI -1093 File Cdrdrv.cpp, Line 1361
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x02440000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x0B 0xF9 0xC0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x02 0x00
7:25:50 PM #23 CDR -1093 File Writer.cpp, Line 335
No seek complete
7:25:50 PM #24 Text 0 File ThreadedTransfer.cpp, Line 227
all writers idle, stopping conversion
7:25:50 PM #25 Text 0 File ThreadedTransfer.cpp, Line 221
conversion idle, stopping reader
7:26:04 PM #26 Phase 38 File APIProgress.cpp, Line 232
Burn process failed at 4x (5,520 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.57a, size=17168 bytes, created 7/30/2003 3:02:00 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
colw
Senior Member
|
7. May 2005 @ 16:51 |
Link to this message
|
|
=== Scsi-Device-Map ===
DiskPeripheral : TOSHIBA MK6021GAS atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD+RW GCA-4040N atapi Port 1 ID 0 DMA: Off
=======================
It may help if you enable DMA on your burner - currently appears to be in PIO mode
|
|
my2222
Suspended due to non-functional email address
|
7. May 2005 @ 21:16 |
Link to this message
|
|
Appreciate your assistance! How do I go about doing this? I am not that technical.
Questions:
1. Why is this an issue all of a sudden?
2. After I used Shrink 3.2 to backup the DVD files, it automicaly burn the files to the new DVD. Since I am having so much problem, after I Backup the files and save it to C: drive, how do I burn these files to DVD later on?!! Looked thru all the tabs and unable to figure out how to do it.
|
Moderator
|
8. May 2005 @ 02:08 |
Link to this message
|
Quote:
Disc Manufacturer ID: IS01, Media Type ID: 001
- hmmm these discs don't sound very brand name to me...
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
my2222
Suspended due to non-functional email address
|
9. May 2005 @ 14:27 |
Link to this message
|
Bought some Sony DVD yesterday from Sam's, after burning similar error message displayed. However, the DVD plays fine?!!
After receiving the error message or a movie I have saved on my C:drive, I really like to find out how to burn another DVD without having to do the Backup again in order for Nero to open for burning?? I have looked thru Nero and tried couple of times to burn it from the application without success. I do not intend to edit or create my own movies, just enough to burn movies or TV shows to DVD.
Any chance Shrink3.2 is bad?
|
|
LeRobert
Junior Member
|
9. May 2005 @ 14:54 |
Link to this message
|
|
koalatech:
Press: ctrl+alt+delete (at the same time), take note of the applications that are running at the background and the number of processes(just the number) and write back.
|
|
koalatech
Newbie
|
12. May 2005 @ 04:03 |
Link to this message
|
|
Sorry for the delay.
I bought a new DVD burner. Its an LG GSA-4163B I installed it into a Vantec Nexstar 2 5.25" IDE/USB/Firewire enclosure. Currently I'm using USB 2 interface.
I am using the same programs and media etc and the new drive works 100%, not a single failure and I have burned about a dozen discs so far.
The internal drive is also an LG but an older model GWA-4040N. I am really starting to suspect I have a faulty Drive unit. I have made inquiries about the firmware but there doesn't appear to be any newer firmware updates for that model (this in itself could be a problem).
A friend told me he had exactly the same problem. He too could read all media and burn DVD-RW but not - or + R. He had the drive replaced and it fixed the problem.
I noticed my2222 is using a GCA-4040N.
I didn't do any research, but I wonder if the 4040N (GCA and GWA) have reliability/compatability issues.
I guess time will tell to see how reliable my new drive is. The only problem using an external USB burner, is that it's slower than an internal one on the IDE bus. What I do is read on the 4040N and burn on the 4163B if I need to copy discs.
|
|
my2222
Suspended due to non-functional email address
|
12. May 2005 @ 17:06 |
Link to this message
|
|
I think my drive is going out. I don't think the compability is the issue for I have burned at least 150 DVDs from Nov04 to several weeks ago.
One of my friend suggested I go buy the DVD cleaner. The first time I cleaned it there was a white ring formed around the brushes. I cleaned it one more time, burned a DVD, got the error, however, I had a partial burn. Part of the program came up.
Seems more of the hardware issues?!!!!
|
|
jfb130
Suspended due to non-functional email address
|
17. May 2005 @ 21:16 |
Link to this message
|
|
I am having the IDENDTICAL problem any solutions?
|
Moderator
|
17. May 2005 @ 22:38 |
Link to this message
|
|
@jfb130 - you'll need to give us a lot more than that to go on. Go thru the thread and post the same sort of info/system info/log info as above...
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
my2222
Suspended due to non-functional email address
|
23. May 2005 @ 16:00 |
Link to this message
|
|
Cleaning the DVD drive worked!!! Well, at least burning on Sony media and not the Fry's on sale DVDs. The Staple DVD cleaner did not work well, had a difficult time to get it to 'play'/clean continuously. So I went and bought a Scotch/3M DVD cleaner and cleaned the drive 5 times in a row and now I have NO problem burning on the Sony DVDs.
Maybe if I clean the DVD drive better maybe the drive will be able to read the cheaper DVD like it was several weeks ago.
|
Moderator
|
23. May 2005 @ 23:00 |
Link to this message
|
|
it may do, but cheaper media is still cheaper media
:)
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
my2222
Suspended due to non-functional email address
|
6. September 2005 @ 10:16 |
Link to this message
|
I like to hear your opinion on this...
Several weeks ago I was starting to have issue burning movies again. Even after cleaning the DVD drive several times. I told my friend and he told me it maybe the time to get a new drive.
I finally called Compaq (I rather suffer than to have to call tech support; as they usually read out the directions from a book anyway). 'Josh' from India had me uninstall the DVD drives, turn on and off the notebook. Since I was able to play a DVD movie, 'Josh'told me is the application(Nero) issue, and I should use Sonic or WinDVD that were included with the purchase. He was not able to walk me through using WinDVD, so he told me to use Nero. Of which I was able to burn the two movies I have tried to burn several times before this call, and on the cheap DVDs.
To make a long story short I then was able to rip and burnt two more movies, before it stopped ripping the third one. I repeated the process of uninstalling and reinstalling the drive, I was again able to rip and burn three more movies?!!!!
|
|
Advertisement
|
|
|
Moderator
|
6. September 2005 @ 10:22 |
Link to this message
|
|
@my2222 - post Latest section of logfile... it's always possible that the drive's playing up, but first we should check settings like before, and check for crap media again. the whole point with crap media is it's inconsistent
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
