|
|
|
Help with using shrink and nero together
|
|
|
learnme
Suspended due to non-functional email address
|
6. May 2005 @ 15:56 |
Link to this message
|
This will be long and probally annoying...sorry.
First of all I thought had the burning thing mastered using only Shrink and Decrypter, then I got a new comp, and now I am lost again. Yes I tried using the guide: http://www.afterdawn.com/guides/archive/dvd9_to_dvdr_with_dvd_shrink.cfm
first I will give you the differences in my systems.
Old: Compaq Presario, Athalon CPU 533 mhz, 9 gig hard drive,256 RAM, File system=Fat32....Burner Khypermedia 8x
New: Dell Demension, Pentium 4 CPU 2.00 GHz, 74 gig hard drive, 256 RAM, File system=NTFS...Burner Sony 16xDVD+R Single Layer
Now with this being said I know that having different file systems makes a difference I just don't know what those differences are. What I am trying to burn is both Blade Trinity, and National Treasure. I followed the guide to the T, and used Nero to get the Video_ts files, and National Treasure burned fine but when I tried it in my player (sony also) it said "disk is dirty" I cleaned it and still got the same message. Then I burned Blade Trinity (or tried to anyway)and this time I chose to verify the disk and got an error. I saved the log from Nero:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 5:33:44 PM
Nero version: 6.3.1.19
Recorder: <SONY DVD RW DRU-710A> Version: BY03 - HA 1 TA 0 - 6.3.1.19
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SAMSUNG CD-ROM SC-148C >Version: B104 - HA 1 TA 1 - 6.3.1.19
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST380021A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SONY DVD RW DRU-710A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SAMSUNG CD-ROM SC-148C atapi Port 1 ID 1 DMA: Off
=== CDRom-Device-Map ===
SONY DVD RW DRU-710A D: CDRom0
SAMSUNG CD-ROM SC-148C E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 254MB (260912kB)
Free physical memory: 84MB (86236kB)
Memory in use : 66 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
6.5.2005
UDF/ISO compilation
5:50:30 PM #1 Phase 112 File dlgbrnst.cpp, Line 1865
DVD-Video files reallocation started
5:50:30 PM #2 Phase 114 File dlgbrnst.cpp, Line 1865
DVD-Video files reallocation completed (no file modified)
5:50:30 PM #3 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
5:50:30 PM #4 Phase 111 File dlgbrnst.cpp, Line 1865
DVD-Video files sorted
5:50:30 PM #5 Text 0 File Reader.cpp, Line 118
Reader running
5:50:30 PM #6 Text 0 File Writer.cpp, Line 124
Writer SONY DVD RW DRU-710A running
5:50:30 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
5:50:30 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
5:50:30 PM #9 Text 0 File Burncd.cpp, Line 3173
Turn on Disc-at-once, using DVD media
5:51:06 PM #10 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2192031 (487:07.06, 4281MB)
5:51:06 PM #11 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD)
5:51:06 PM #12 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: SONY DVD RW DRU-710A, Media type: DVD+R
Disc Manufacturer ID: CMC MAG, Media Type ID: E01, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3
5:51:06 PM #13 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Disc not writeable. Insert writeable disc.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Double Layer.)
5:51:06 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2192032 (2192032) = #2192032/487:7.7
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2192032 blocks [SONY DVD RW DRU-710A ]
--------------------------------------------------------------
5:51:06 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [SONY DVD RW DRU-710A ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4489281536, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2192032 | lead-out | 1 | 0x00 | 0x41
5:51:06 PM #16 Phase 24 File dlgbrnst.cpp, Line 1865
Caching of files started
5:51:06 PM #17 Text 0 File Burncd.cpp, Line 4183
Cache writing successful.
5:51:06 PM #18 Phase 25 File dlgbrnst.cpp, Line 1865
Caching of files completed
5:51:06 PM #19 Phase 36 File dlgbrnst.cpp, Line 1865
Burn process started at 8x (11,080 KB/s)
5:51:06 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
5:51:06 PM #21 Text 0 File Cdrdrv.cpp, Line 8128
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: CMC.MAG.
Media type ID: E01
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 43 4D 43 20 4D - 41 47 00 45 30 31 00 38 ...CMC.MAG.E01.8
23 54 37 10 02 38 6A 02 - 88 67 15 15 0B 0B 08 08 #T7..8j..g......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
5:51:06 PM #22 Text 0 File DVDR.cpp, Line 4817
Drive: SONY DVD RW DRU-710A
Book Type request: Physical disc type
Changing the book type was finished with error code: 0
5:51:06 PM #23 Text 0 File dlgbrnst.cpp, Line 1723
Set remaining time: 6:54,351 (414351ms) -> OK
5:51:06 PM #24 Text 0 File DVDPlusRW.cpp, Line 628
Start write address at LBA 0
DVD high compatibility mode: Yes
5:58:35 PM #25 Text 0 File WriterStatus.cpp, Line 115
<SONY DVD RW DRU-710A > start writing Lead-Out at LBA 2192032 (2172A0h), lenght 0 blocks
5:58:35 PM #26 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
5:59:07 PM #27 Text 0 File dlgbrnst.cpp, Line 1723
Set remaining time: 0:00,000 (0ms) -> OK
5:59:07 PM #28 Text 0 File DVDR.cpp, Line 4817
Drive: SONY DVD RW DRU-710A
Book Type request: DVD+R
Changing the book type was finished with error code: 0
5:59:07 PM #29 Text 0 File dlgbrnst.cpp, Line 1723
Set remaining time: 0:00,000 (0ms) -> OK
5:59:07 PM #30 Phase 37 File dlgbrnst.cpp, Line 1865
Burn process completed successfully at 8x (11,080 KB/s)
5:59:07 PM #31 Phase 78 File dlgbrnst.cpp, Line 1865
Data verification started
5:59:31 PM #32 SCSI -1128 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x031F3000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x21 0x72 0x80 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05
5:59:31 PM #33 Text 0 File DriveFileSystemBlockReader.cpp, Line 231
Error during reading the sector: 2192000
5:59:38 PM #34 SCSI -1128 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03203000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05
5:59:38 PM #35 Text 0 File DriveFileSystemBlockReader.cpp, Line 231
Error during reading the sector: 0
5:59:42 PM #36 SCSI -1128 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03203000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x00 0x01 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05
5:59:42 PM #37 Text 0 File DriveFileSystemBlockReader.cpp, Line 231
Error during reading the sector: 256
5:59:49 PM #38 SCSI -1128 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03203000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x21 0x72 0x80 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05
5:59:49 PM #39 Text 0 File DriveFileSystemBlockReader.cpp, Line 231
Error during reading the sector: 2192000
5:59:55 PM #40 SCSI -1128 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03203000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x21 0x71 0x80 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05
5:59:55 PM #41 Text 0 File DriveFileSystemBlockReader.cpp, Line 231
Error during reading the sector: 2191744
6:00:01 PM #42 SCSI -1128 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03203000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x00 0x02 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05
6:00:01 PM #43 Text 0 File DriveFileSystemBlockReader.cpp, Line 231
Error during reading the sector: 512
6:00:01 PM #44 VERIFYERR 10 File UDFCompilationImpl.cpp, Line 1282
Cannot mount the written CD
"SONY DVD RW DRU-710A " (H:1, T:0)
6:00:01 PM #45 VERIFYERR 13 File UDFCompilationImpl.cpp, Line 1380
Status summary
Total files=0, identical=0, different=0, inaccessible=0, skipped=0.
6:00:01 PM #46 Phase 81 File dlgbrnst.cpp, Line 1865
Data verification failed
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.57a, size=17168 bytes, created 7/30/2003 2:02:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.28 (xpclnt_qfe.010827-1803), size=86912 bytes, created 1/30/2002 3:49:08 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Gosh, I am really sorry for the length of this message but I felt it better to give to much info than not enough. If anyone can help me here it would be soo greatly appreciated. Thank you in advance!!
|
|
learnme
Suspended due to non-functional email address
|
6. May 2005 @ 16:01 |
Link to this message
|
|
Forgot to mention that the media I am using is HP Invent 8x. These are the only ones I have ever used and I have used roughly 100, and never had any problems. Thanks
|
AfterDawn Addict
|
6. May 2005 @ 16:29 |
Link to this message
|
Quote:
Disc Manufacturer ID: CMC MAG, Media Type ID: E01, Product revision number: 0
Not a highly recommended manufacturer for dvd media. They do cause a lot of problems.You can have numberous errors on your backup,especially burning at 8x.
Quote:
These are the only ones I have ever used and I have used
You've got a different burner,therefore,your stand alones are going to play them different.I had a khypermedia +8x in my new pc when I got it,but my apex player wouldn't play the backups from it. A new benq 1620 took care of it. Different burners,different lasers= some stand alones can be pickier on which burner's backups they will play. The usual "no disc/dirty disc" errors will occur meaning it is likely a compatability issue.Sometimes switching to a higher quality media and a 4x burnspeed may take care of it.
8x burn speed is pretty fast,especially on cmags. I burn a few,but I burn them at 2.4x,not the recommended 8x like the mfgs list. Again,poor media has to be burned slower.
Quote:
Then I burned Blade Trinity
Was this the original copy you tried to backup or was it a copy you were trying to re-rip for another copy?
The burn log said successful so:
How do those backups look when you view them on your new pc using the sony dvdrw drive-the drive that produced those backups?
HP a1118x-b/athlon 64-3300+/BenQ 1650 BCDC/LG 8163B/Modded Wii/Epson-R300 and Ty Watershields!!! |
|
