|
|
|
DVD+r vs DVD-R
|
|
|
brobear
Suspended permanently
|
29. August 2005 @ 13:04 |
Link to this message
|
|
In case no one welcomed you earlier, welcome to the forum brokenss.
|
|
Advertisement
|
|
|
|
|
brokenss
Newbie
|
29. August 2005 @ 13:53 |
Link to this message
|
|
I'm doubtful if its the movie I am trying to burn. I will give this DVD Dercypter a shot but if if it was an age factor why would Natural Born Killers work (it on old movie) work, but the new version of Fear and Loathing in Las vegas work. Age appears to have no relevence in what will and wont burn.
|
AfterDawn Addict
6 product reviews
|
29. August 2005 @ 14:09 |
Link to this message
|
Rig #1 Asus Rampage Formula Mobo, Intel Core2Quad Q9450 CPU @ 3.55ghz, 2gb Corsair DDR2 1066 Dominator Ram @ 5-5-5-15, TR Ultra 120 Extreme w/ Scythe 9 blade 110 cfm 120mm Fan HSF, HIS Radeon 512mb HD3850 IceQ TurboX GPU, Corsair 620HX P/S, CM Stacker 830 Evo Case, Rig #2 Asus P5W DH Deluxe Mobo, Intel C2D E6600 CPU @ 3.6ghz, 2gb Corsair XMS2 DDR2 800 Ram @ 4-4-4-12-2t, Zalman CNPS9500LED HSF, Sapphire Radeon X850XT PE GPU, Corsair 620HX P/S, Cooler Master Mystique Case, Viewsonic 20.1" Widescreen Digital LCD Monitor, Klipsch Promedia Ultra 5.1 THX Desktop Speakers, http://valid.x86-secret.com/show_oc.php?id=348351 http://valid.x86-secret.com/show_oc.php?id=236435 |
|
brokenss
Newbie
|
29. August 2005 @ 14:40 |
Link to this message
|
|
thanks guys I'll try this when I get home... I'll post the full report too.
|
|
brobear
Suspended permanently
|
29. August 2005 @ 15:12 |
Link to this message
|
Quote:
I'm doubtful if its the movie I am trying to burn.
The possibilities are very limited; user interface (you), the software, or the source. With Shrink doing a good job on some movies, but a problem on just the one so far, it seems we can almost eliminate the transcoder. Since the computer is burning some movies, we are assuming no hardware problems. So, the question is, why will Shrink not transcode the particualar movie? I was just covering the situation with Shrink; no updates in the past year. Since Shrink is a proven transcoder, that leaves only the encryption, physical condition of the disc, software interference (you'd get that one with other DVDs as well), or misuse of the software.
The Nero is simply the burner and has nothing to do with the transcode. The freeware DVD Decrypter could burn just as well and there are a number of burning apps available. I like the CopyToDVD as well as the ones mentioned. But we're getting away from the problem.
Quote:
I will give this DVD Dercypter a shot but if if it was an age factor why would Natural Born Killers work (it on old movie) work, but the new version of Fear and Loathing in Las vegas work. Age appears to have no relevence in what will and wont burn.
As Mort attested to the fact, under the situation with encryption, it makes a lot of difference. Notice I didn't say all movies over the past year. Sony's ARccOS, the bad sector enccryption and some of the structural encryption are new and Shrink will not work alone with movies having that Encryption. If you doubt my word, try Resident Evil 2, Little Black Book, Grudge, and I think possibly the last Bourne movie caused a bit of a problem (there are others, I don't keep a list). Also, in the past, it was suggested to rip with Decrypter when Shrink ran into a decryption problem. At one point that was posted on the Shrink site. So, be aware, age can make a difference (if the newer movie has new encryption). I wasn't saying that was the problem in this particular instance, just stating possibilities without going into a search of the movie's lineage.
As I mentioned, the possibilities are very limited. More than likely you'll find you didn't do something correctly, such as not getting a clean source for the transcoder, or you have a problematic disc. DVDs will play on a standalone that won't record. You might consider getting a program like DVDInfoPro to check for disc errors. Follow Mort's advice and you'll probably be okay; rip with Decrypter or use AnyDVD. For certain tasks, I often use both at the same time.
This message has been edited since posting. Last time this message was edited on 29. August 2005 @ 15:33
|
|
brokenss
Newbie
|
30. August 2005 @ 15:56 |
Link to this message
|
this is my error message:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero API version: 6.6.0.16
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 16b
Recorder: <PIONEER DVD-RW DVR-109> Version: 1.40 - HA 1 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD400EB-00CPF0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-109 atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
PIONEER DVD-RW DVR-109 D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 253MB (260080kB)
Free physical memory: 67MB (68900kB)
Memory in use : 73 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
30.8.2005
NeroAPI
4:47:21 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
4:47:21 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
4:47:21 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
4:47:39 PM #4 Text 0 File Reader.cpp, Line 127
Reader running
4:47:39 PM #5 Text 0 File Writer.cpp, Line 122
Writer PIONEER DVD-RW DVR-109 running
4:47:40 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
4:47:51 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
4:47:51 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
4:47:51 PM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
4:47:52 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1685487 (374:33.12, 3291MB)
4:47:52 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO
4:47:52 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: PIONEER DVD-RW DVR-109, Media type: DVD-R
Disc Manufacturer: FUJIFI - LM03
Disc Application Code: 64, Disc Physical Code: 193
4:47:52 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
4:47:52 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1685488 (1685488) = #1685488/374:33.13
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1685488 blocks [PIONEER DVD-RW DVR-109]
--------------------------------------------------------------
4:47:52 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [PIONEER DVD-RW DVR-109] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3451879424, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1685488 | lead-out | 1 | 0x41 | 0x00
4:47:52 PM #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
4:47:52 PM #17 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
4:47:52 PM #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
4:47:52 PM #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 8x (11,080 KB/s)
4:47:53 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
4:47:53 PM #21 Text 0 File DVDR.cpp, Line 2379
Recording mode: Sequential Recording Mode
4:47:53 PM #22 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Buffer underrun protection -> ON
4:47:53 PM #23 Text 0 File DVDR.cpp, Line 2534
Start write address at LBA 0
DVD high compatibility mode: Yes
4:47:53 PM #24 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 30 01 02 04 06 00 00 - 00 08 00 00 00 00 00 00 .0..............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
4:47:54 PM #25 Text 0 File Cdrdrv.cpp, Line 1286
16:47:54.640 - PIONEER DVD-RW DVR-109\H1 T0 : Queue again later
4:49:44 PM #26 SCSI -1135 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0BF90000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x03 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x0C 0x00
4:49:44 PM #27 CDR -1135 File Writer.cpp, Line 311
Write error
4:49:44 PM #28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
4:49:44 PM #29 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
4:49:44 PM #30 Text 0 File DVDR.cpp, Line 2774
EndDAO: Last written address was 767
4:49:45 PM #31 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 8x (11,080 KB/s)
4:49:45 PM #32 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
4:49:45 PM #33 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
now I havent use those programs you guys were telling me about cause i havent had any spare time but Im still willing to try. with this stupid error I am way off schedule with netflix.
|
AfterDawn Addict
6 product reviews
|
30. August 2005 @ 16:28 |
Link to this message
|
Here's a couple things I see.
Quote:
Recorder: <PIONEER DVD-RW DVR-109> Version: 1.40
Try updating your firmware. Yours is 1.40 and the most rescent is 1.58 http://forum.rpc1.org/dl_firmware.php?download_id=2017
Quote:
Memory in use : 73 %
You're useing most your memory. Try shutting down some background programs.
A firmware update may solve your problems.
Mort
Rig #1 Asus Rampage Formula Mobo, Intel Core2Quad Q9450 CPU @ 3.55ghz, 2gb Corsair DDR2 1066 Dominator Ram @ 5-5-5-15, TR Ultra 120 Extreme w/ Scythe 9 blade 110 cfm 120mm Fan HSF, HIS Radeon 512mb HD3850 IceQ TurboX GPU, Corsair 620HX P/S, CM Stacker 830 Evo Case, Rig #2 Asus P5W DH Deluxe Mobo, Intel C2D E6600 CPU @ 3.6ghz, 2gb Corsair XMS2 DDR2 800 Ram @ 4-4-4-12-2t, Zalman CNPS9500LED HSF, Sapphire Radeon X850XT PE GPU, Corsair 620HX P/S, Cooler Master Mystique Case, Viewsonic 20.1" Widescreen Digital LCD Monitor, Klipsch Promedia Ultra 5.1 THX Desktop Speakers, http://valid.x86-secret.com/show_oc.php?id=348351 http://valid.x86-secret.com/show_oc.php?id=236435 |
|
brokenss
Newbie
|
30. August 2005 @ 21:05 |
Link to this message
|
|
I have gone through the msconfig and eliminated tons of shit but when I tried to update my firmware I attemted to install the file and it threw up an error message saying available target not found. after that it closes the program
|
Senior Member
|
30. August 2005 @ 21:39 |
Link to this message
|
Perhaps this guide will help you update your firmware. (Although the link to your firmware has already been given to you.) - http://forum.digital-digest.com/showthread.php?s=&threadid=50100
Installing your firmware:
1. Carefully read the readme that came with the firmware update
2. Don't run any other programs at the same time
3. Don't have any disc in your burner at the same time
4. Restart your PC after you have flashed it.
|
|
brokenss
Newbie
|
30. August 2005 @ 23:07 |
Link to this message
|
|
Still getting it... I got nothing running. The drive is empty and I cant read the readme cause it doesnt get that far into the install.
|
Senior Member
|
31. August 2005 @ 14:11 |
Link to this message
|
|
Is your drive "External" or "Internal"?
|
|
brokenss
Newbie
|
1. September 2005 @ 06:26 |
Link to this message
|
|
internal
|
Senior Member
|
1. September 2005 @ 06:49 |
Link to this message
|
|
Ok thought it might of been external.
|
AfterDawn Addict
6 product reviews
|
1. September 2005 @ 07:15 |
Link to this message
|
Rig #1 Asus Rampage Formula Mobo, Intel Core2Quad Q9450 CPU @ 3.55ghz, 2gb Corsair DDR2 1066 Dominator Ram @ 5-5-5-15, TR Ultra 120 Extreme w/ Scythe 9 blade 110 cfm 120mm Fan HSF, HIS Radeon 512mb HD3850 IceQ TurboX GPU, Corsair 620HX P/S, CM Stacker 830 Evo Case, Rig #2 Asus P5W DH Deluxe Mobo, Intel C2D E6600 CPU @ 3.6ghz, 2gb Corsair XMS2 DDR2 800 Ram @ 4-4-4-12-2t, Zalman CNPS9500LED HSF, Sapphire Radeon X850XT PE GPU, Corsair 620HX P/S, Cooler Master Mystique Case, Viewsonic 20.1" Widescreen Digital LCD Monitor, Klipsch Promedia Ultra 5.1 THX Desktop Speakers, http://valid.x86-secret.com/show_oc.php?id=348351 http://valid.x86-secret.com/show_oc.php?id=236435 |
|
brokenss
Newbie
|
1. September 2005 @ 15:33 |
Link to this message
|
|
Alright I may have found the problem. I looked for this Pioneer dvr 109 firmware download else where. During my search I found a picture of the product and noticed a small difference between my burner and the picture. I went back to the website I bought it off and realized the DVD burner I bought was actually called the PIONEER A09XLB. I am not sure if maybe my computer is recognizing my burner as something else... is there firmware updates for the Pioneer A09XLB?
|
AfterDawn Addict
6 product reviews
|
1. September 2005 @ 16:29 |
Link to this message
|
Rig #1 Asus Rampage Formula Mobo, Intel Core2Quad Q9450 CPU @ 3.55ghz, 2gb Corsair DDR2 1066 Dominator Ram @ 5-5-5-15, TR Ultra 120 Extreme w/ Scythe 9 blade 110 cfm 120mm Fan HSF, HIS Radeon 512mb HD3850 IceQ TurboX GPU, Corsair 620HX P/S, CM Stacker 830 Evo Case, Rig #2 Asus P5W DH Deluxe Mobo, Intel C2D E6600 CPU @ 3.6ghz, 2gb Corsair XMS2 DDR2 800 Ram @ 4-4-4-12-2t, Zalman CNPS9500LED HSF, Sapphire Radeon X850XT PE GPU, Corsair 620HX P/S, Cooler Master Mystique Case, Viewsonic 20.1" Widescreen Digital LCD Monitor, Klipsch Promedia Ultra 5.1 THX Desktop Speakers, http://valid.x86-secret.com/show_oc.php?id=348351 http://valid.x86-secret.com/show_oc.php?id=236435 |
|
brokenss
Newbie
|
1. September 2005 @ 17:04 |
Link to this message
|
|
all better! thanks a bunch guys
|
AfterDawn Addict
6 product reviews
|
1. September 2005 @ 17:47 |
Link to this message
|
|
You're welcome and good luck.
Rig #1 Asus Rampage Formula Mobo, Intel Core2Quad Q9450 CPU @ 3.55ghz, 2gb Corsair DDR2 1066 Dominator Ram @ 5-5-5-15, TR Ultra 120 Extreme w/ Scythe 9 blade 110 cfm 120mm Fan HSF, HIS Radeon 512mb HD3850 IceQ TurboX GPU, Corsair 620HX P/S, CM Stacker 830 Evo Case, Rig #2 Asus P5W DH Deluxe Mobo, Intel C2D E6600 CPU @ 3.6ghz, 2gb Corsair XMS2 DDR2 800 Ram @ 4-4-4-12-2t, Zalman CNPS9500LED HSF, Sapphire Radeon X850XT PE GPU, Corsair 620HX P/S, Cooler Master Mystique Case, Viewsonic 20.1" Widescreen Digital LCD Monitor, Klipsch Promedia Ultra 5.1 THX Desktop Speakers, http://valid.x86-secret.com/show_oc.php?id=348351 http://valid.x86-secret.com/show_oc.php?id=236435 |
Newbie
|
2. September 2005 @ 14:13 |
Link to this message
|
|
I have burned about 800 InkJethubPrint 8X Linkyo -R DVDs and only had 3 coasters (and I think those were from power glitches). Bought them at superemediastore for 36 cents each (got free ground shipping) Why 800? We have a video business, I used to use ProDisc silver InkJethubPrint but about a year ago their quality went down a bit.
st0416
This message has been edited since posting. Last time this message was edited on 4. September 2005 @ 20:30
|
|
Hemispasm
Suspended due to non-functional email address
|
2. September 2005 @ 15:43 |
Link to this message
|
Quote:
Originally posted by probear
The house brand, Hitachi Maxell, is one I'm not that familiar with, but I've not heard any outrageous complaints about it, as is the case with Memorex and the CMC Magnetics media.
They're pretty descent believe me :) I have used them / tested them several times with numerous recorders and they acted pretty well most of the times. I can throw in a couple of scans if they are welcome.
@ brokenss
From the Nero log you have posted there are couple of things that can come to on'es mind. The "0x03 (KEY_MEDIUM_ERROR) " usually comes as a result of media that dont work well with the drive one's using (not secessarily of bad quality but possibly yes). If i am not mistaken you havent posted the MID of the Fuji's you are using, so i really cant tell. They are probably FUJIFILM03 if 8x -R media or ProdiscS03 if 4x -R media but i can only guess. So you could just try with other media.
Of course upgrading to the newest firmware will most certainly help. In addition sometimes for this type of error a badly installed 3rd party ASPI layer could be the one responsible, so check on that one too.
This message has been edited since posting. Last time this message was edited on 2. September 2005 @ 15:44
|
|
brobear
Suspended permanently
|
2. September 2005 @ 20:57 |
Link to this message
|
Quote:
Originally posted by probear
Thanks for the rank change, but alas... it's a B and not a p.
-Brobear- ;)
Good info though. No need for the scans; your post was sufficient. The scans are more helpful when showing problems.
Just a note on ASPI for those unfamiliar with it. With new OSs like XP there is little need for it unless a specific app requires it. It is rare to see it needed with Windows nowadays. Here is a link for anyone wanting to get an understanding of ASPI. http://aspi.radified.com/ For a good install, when needed with a newer OS, something like ForceASPI is useful. It has the proper tools for removal of any problem ASPI setups and can install properly. With all the codecs and varied software I run, I've yet to need ASPI loaded to the system. I use Nero, but it carries its own ASPI files for when/if they're needed.
|
|
Ryan32us
Suspended due to non-functional email address
|
5. September 2005 @ 05:08 |
Link to this message
|
|
I have seen mention of bityping or byte setting, to improve compatibility with players, they will see them as dvd-roms, can someone explain this to me, I use a LG burner and have had some disks just reporting as error in the standalone player, it is a few yrs old just wondering if this is something which might help?
|
AfterDawn Addict
6 product reviews
|
5. September 2005 @ 08:35 |
Link to this message
|
Ryan32us,
Your LG drive should be capable of bitsetting and I would be happy to help you set it up but answer a few questions for me 1st. Note: this can only be done with dvd+r/rw media.
What proggy do you use to compress/transcode?
What proggy do you use to burn?
What speed are you burning at? (4x is recommended)
What media are you useing? Use dvd identifier http://dvd.identifier.cdfreaks.com/ and tell me the manufacturer and ID.
Mort
Rig #1 Asus Rampage Formula Mobo, Intel Core2Quad Q9450 CPU @ 3.55ghz, 2gb Corsair DDR2 1066 Dominator Ram @ 5-5-5-15, TR Ultra 120 Extreme w/ Scythe 9 blade 110 cfm 120mm Fan HSF, HIS Radeon 512mb HD3850 IceQ TurboX GPU, Corsair 620HX P/S, CM Stacker 830 Evo Case, Rig #2 Asus P5W DH Deluxe Mobo, Intel C2D E6600 CPU @ 3.6ghz, 2gb Corsair XMS2 DDR2 800 Ram @ 4-4-4-12-2t, Zalman CNPS9500LED HSF, Sapphire Radeon X850XT PE GPU, Corsair 620HX P/S, Cooler Master Mystique Case, Viewsonic 20.1" Widescreen Digital LCD Monitor, Klipsch Promedia Ultra 5.1 THX Desktop Speakers, http://valid.x86-secret.com/show_oc.php?id=348351 http://valid.x86-secret.com/show_oc.php?id=236435 |
|
brobear
Suspended permanently
|
5. September 2005 @ 10:10 |
Link to this message
|
|
Also, since the equipment is a bit dated (forgive the unintentional pun), have all the firmware updates been done? You have them for ROM drives, burners, and standalone players. Firmware problems are notorious for causing compatibility issues. Just an addition to Mort's pertinent questions. Bittyping can sometimes help with older equipment, but it isn't a cure all.
This message has been edited since posting. Last time this message was edited on 5. September 2005 @ 10:16
|
|
Advertisement
|
|
|
|
Ryan32us
Suspended due to non-functional email address
|
5. September 2005 @ 13:04 |
Link to this message
|
My lg drive is firmware a301, there was an issue with from new, this change improved, I would be afraid to check for upgrades since so friends have done that and are receiving msg's of compatibility when they try to make backups {shoulda left well enough alone}.I use Nero 6.0019 usually, I use dvddecrypt,dvd shrink{newest i think 3.2},dvdfabgold { no success with this one yet}I always burn at 4X speed { max of my drive} As for media I have tried many, verbatum,memorex{ with a lot of success,maybe I am the exception hehe},maxell, and fujifilm.Mosytly whatever is on sale and has worked in the past.Currently I have fujifilm 8X spindle here,this is the dvd info
----------------------------------------------------------------------------
Unique Disc Identifier : [DVD+R:RITEK-R03-002]
----------------------------------------------------------------------------
Disc & Book Type : [DVD+R] - [DVD+R]
Manufacturer Name : [Ritek Corp.]
Manufacturer ID : [RITEK]
Media Type ID : [R03]
Product Revision : [002]
Blank Disc Capacity : [Not Supported By Method 2]
Recording Speeds : [1x-2.4x , 4x , 6x-8x]
[Method 2 Might Not Always Detect All Speeds]
----------------------------------------------------------------------------
[ DVD Identifier - http://DVD.Identifier.CDfreaks.com ]
----------------------------------------------------------------------------
this one I had 4 failures out of 25 disks,labelled memorex
----------------------------------------------------------------------------
Unique Disc Identifier : [DVD+R:CMC MAG-E01-000]
----------------------------------------------------------------------------
Disc & Book Type : [DVD+R] - [DVD+R]
Manufacturer Name : [CMC Magnetics Corp.]
Manufacturer ID : [CMC MAG]
Media Type ID : [E01]
Product Revision : [Not Specified]
Blank Disc Capacity : [Not Supported By Method 2]
Recording Speeds : [1x-2.4x , 4x , 6x-8x]
[Method 2 Might Not Always Detect All Speeds]
----------------------------------------------------------------------------
[ DVD Identifier - http://DVD.Identifier.CDfreaks.com ]
----------------------------------------------------------------------------
|
|
