|
|
|
Another illegal disk error
|
|
|
wopPi
Newbie
|
8. August 2005 @ 13:26 |
Link to this message
|
|
So, I decided to start backing up some of my movies. I went out and bought a new package of Memorex DVDs (cause I'm a cheap bastard), came home, and saw I still had some old Memorex DVDs lying around (again, I'm a cheap bastard). So, I begin backing up using DVD shrink with the old DVDs, and all 7 went smooth. I open up the new package, and get an illegal disk error as soon as the burning starts. I tried on multiple movies and multiple different DVDs. Same thing. Here's the log:
*KEY REMOVED*
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 2/1/2001 4:10:18 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 6:33:44 PM
Nero API version: 6.3.1.20
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <Memorex DVD+/-DLRWL1 F16>Version: BWSB - HA 4 TA 0 - 6.3.1.20
Adapter driver: <> HA 4
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
=== Scsi-Device-Map ===
CdRomPeripheral : CD-956B atapi Port 0 ID 0 DMA: Off
CdRomPeripheral : SONY CD-RW CRX230ED atapi Port 0 ID 1 DMA: On
DiskPeripheral : WDC WD800JD-00HKA0 SiSRaid Port 2 ID 0 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
CD-956B D: CDRom0
SONY CD-RW CRX230ED E: CDRom1
Generic DVD-ROM F: CDRom2
Memorex DVD+/-DLRWL1 F16 G: CDRom6
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 489MB (501024kB)
Memory in use : 52 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
8.8.2005
NeroAPI
5:17:47 PM #1 Phase 112 File APIProgress.cpp, Line 273
DVD-Video files reallocation started
5:17:47 PM #2 Phase 114 File APIProgress.cpp, Line 273
DVD-Video files reallocation completed (no file modified)
5:17:47 PM #3 Phase 111 File APIProgress.cpp, Line 273
DVD-Video files sorted
5:17:47 PM #4 Text 0 File Reader.cpp, Line 126
Reader running
5:17:47 PM #5 Text 0 File Writer.cpp, Line 124
Writer Memorex DVD+/-DLRWL1 F16 running
5:17:47 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 817
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
5:17:47 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
5:17:47 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
5:17:47 PM #9 Text 0 File Burncd.cpp, Line 3173
Turn on Disc-At-Once, using DVD media
5:18:18 PM #10 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2182271 (484:56.71, 4262MB)
5:18:18 PM #11 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO
5:18:18 PM #12 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: Memorex DVD+/-DLRWL1 F16, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193
5:18:18 PM #13 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Double Layer.)
5:18:18 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2182272 (2182272) = #2182272/484:56.72
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2182272 blocks [Memorex DVD+/-DLRWL1 F16]
--------------------------------------------------------------
5:18:18 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [Memorex DVD+/-DLRWL1 F16] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4469293056, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2182272 | lead-out | 1 | 0x00 | 0x41
5:18:18 PM #16 Phase 24 File APIProgress.cpp, Line 273
Caching of files started
5:18:18 PM #17 Text 0 File Burncd.cpp, Line 4183
Cache writing successful.
5:18:18 PM #18 Phase 25 File APIProgress.cpp, Line 273
Caching of files completed
5:18:18 PM #19 Phase 36 File APIProgress.cpp, Line 273
Burn process started at 4x (5,540 KB/s)
5:18:18 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
5:18:18 PM #21 Text 0 File DVDR.cpp, Line 1942
Recording mode: Sequential Recording Mode
5:18:18 PM #22 Text 0 File Mmc.cpp, Line 20513
Set BUFE: supported -> ON , Generic write control : ON
5:18:18 PM #23 Text 0 File DVDR.cpp, Line 2083
Start write address at LBA 0
DVD high compatibility mode: Yes
5:18:18 PM #24 Text 0 File Cdrdrv.cpp, Line 8128
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
5:18:20 PM #25 SCSI -1046 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 4, TA 0, LUN 0, buffer 0x00FA0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0B
0x00 0x00 0x00 0x00 0x30 0x05
5:18:20 PM #26 CDR -1046 File Writer.cpp, Line 304
Illegal disc
5:18:20 PM #27 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
5:18:20 PM #28 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
5:18:20 PM #29 Text 0 File DVDR.cpp, Line 2325
EndDAO: Last written address was -1
5:18:20 PM #30 Phase 38 File APIProgress.cpp, Line 273
Burn process failed at 4x (5,540 KB/s)
5:18:20 PM #31 Text 0 File AudioCompilationImpl.cpp, Line 828
DRM: DRM burn session terminated.
5:18:20 PM #32 Text 0 File AudioCompilationImpl.cpp, Line 857
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/11/2005 6:28:13 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 2, 16, 0, size=92672 bytes, created 7/16/2004 3:53:14 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 2, 16, 0, size=28672 bytes, created 7/16/2004 3:53:54 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 2, 16, 0, size=7680 bytes, created 7/16/2004 3:57:12 PM (InCD4 driver for win NT/2K/XP)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
If any other info is required, just let me know.
Any help is appreciated ;/.
|
|
Advertisement
|
|
|
|
|
Bigfatboy
Member
|
8. August 2005 @ 14:31 |
Link to this message
|
CdRomPeripheral : CD-956B atapi Port 0 ID 0 DMA: Off
CdRomPeripheral : SONY CD-RW CRX230ED atapi Port 0 ID 1 DMA: On
DiskPeripheral : WDC WD800JD-00HKA0 SiSRaid Port 2 ID 0 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 3 ID 0 DMA: Off
turn on DMA on all your drives
File 'Drivers\InCDfs.SYS': Ver=4, 2, 16, 0, size=92672 bytes, created 7/16/2004 3:53:14 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 2, 16, 0, size=28672 bytes, created 7/16/2004 3:53:54 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 2, 16, 0, size=7680 bytes, created 7/16/2004 3:57:12 PM (InCD4 driver for win NT/2K/XP)
uninstall incd as it can cause problems with burning dvd's
Recorder: Memorex DVD+/-DLRWL1 F16, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
you can find quality media on sale at major stores maybe try discs like verbatim, sony, taiyo yuden
your version of Nero needs to be updated
|
|
wopPi
Newbie
|
8. August 2005 @ 16:43 |
Link to this message
|
Quote:
turn on DMA on all your drives
After a few minutes on google and still not getting an answer, I don't know how to do this. Perhaps you could tell me, or point me to a website that shows how?
Quote:
uninstall incd as it can cause problems with burning dvd's
Again, there is nothing like InCD in add/remove programs, so I'm not sure how to do this. Also, I've never had problems before, why would this start almost immediately after I just succesfully backed up a DVD?
Quote:
your version of Nero needs to be updated
I don't think Nero is the problem, since I just ripped to an iso with DVD Shrink and tried to burn with decrypter, only to get a similar error (Something like "Imcompatible Media"). Due to this error, I think that I simply got a bad batch of DVDs, or Memorex just sucks in general (which I suppose is known fact, but like I said in my first post, I got seven out of seven succeful burns with an older batch of Memorex DVDs). I will, though, update Nero, but can anyone confirm my suspicion that I simply need to buy some better quality DVDs?
This message has been edited since posting. Last time this message was edited on 8. August 2005 @ 16:45
|
AfterDawn Addict
|
8. August 2005 @ 16:49 |
Link to this message
|
Your firmware on your burner needs updating there is a new one BWSE.
http://forum.rpc1.org/dl_firmware.php?category=4&manufactor=20
Scroll down and find your burner and dl the update, it should help in recognizing those new disks. However, I know you stated your cheap but reconsider another media, it is only a few pennies :)
|
Moderator
|
9. August 2005 @ 05:43 |
Link to this message
|
@wopPi -
Quote:
Nero API version: 6.3.1.20
- way too old, latest is 6.6.0.15
Quote:
Recorder: <Memorex DVD+/-DLRWL1 F16>Version: BWSB
- newer firmware is here - http://forum.rpc1.org/dl_firmware.php?download_id=1925
Quote:
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
- is this burner in a USB enclosure by any chance ?
Quote:
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
- yup, Nero is too old to recognise your burner correctly. Update Nero
Quote:
CdRomPeripheral : CD-956B atapi Port 0 ID 0 DMA: Off
CdRomPeripheral : SONY CD-RW CRX230ED atapi Port 0 ID 1 DMA: On
DiskPeripheral : WDC WD800JD-00HKA0 SiSRaid Port 2 ID 0 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 3 ID 0 DMA: Off
- reset your DMA settings via this - http://home.comcast.net/~bbmayo/FAQ.htm
Quote:
Recorder: Memorex DVD+/-DLRWL1 F16, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193
- yup, being cheap has enabled you to buy THE worst atrocious media out there. 'fraid this is gonna cost you in the long run, crap media is one thing that is not cost effective. get decent media for no extra cost.
..Memorex/CMC - don't let them near your Burner..... - http://forums.afterdawn.com/thread_view.cfm/195438
Quote:
Illegal disc
- get decent media :)
Quote:
File 'Drivers\InCDfs.SYS': Ver=4, 2, 16, 0, size=92672 bytes, created 7/16/2004 3:53:14 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 2, 16, 0, size=28672 bytes, created 7/16/2004 3:53:54 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 2, 16, 0, size=7680 bytes, created 7/16/2004 3:57:12 PM (InCD4 driver for win NT/2K/XP)
- this is Nero's packet writing software, it tends to interfere with Nero Burning Rom. uninstall existing out of date Nero, uninstall completely via Nero's Clean Tools - " http://www.nero.com/en/Clean_Tools.html " and install latest 6.6.0.16 WITHOUT installing Nero's InCD
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***This message has been edited since posting. Last time this message was edited on 9. August 2005 @ 05:44
|
|
wopPi
Newbie
|
9. August 2005 @ 21:37 |
Link to this message
|
I did everything everyone suggested (except update Nero, though I did uninstall it completely. I just tried writing with DVD Decrypter.) I got the same error. And yes, this burner is external, but not in a USB port.. It's in a firewire port. I just think there's something wrong with these disks I got, or my burner is just having trouble with them, cause there's no other explanation for it working fine, then not working at all as soon as I start using different discs.
|
|
Bruce999
Member
|
9. August 2005 @ 21:46 |
Link to this message
|
|
woppi:
>>> did everything everyone suggested (except update Nero, though I did uninstall it completely. <<<
Do you by any chance have any of the Roxio software installed on your PC? If so, this is a known issue, and the usual error it causes is an "illegal disc" error. I have a friend who had "illegal disc" errors in every software (he tried six different burning programs), using the best media (Taiyo Yudens, Verbatim, and Ritek GO4s). He fumbled with this for three weeks and made 57 straight coasters. Then, he learned of the Roxio problem, uninstalled the Roxio, and his problem disappeared forever.
And, did you manage to uninstall "INCD"?
Just a thought...
-Bruce
-Bruce
This message has been edited since posting. Last time this message was edited on 9. August 2005 @ 21:48
|
|
wopPi
Newbie
|
9. August 2005 @ 21:53 |
Link to this message
|
|
No, I don't have Roxio on my system. Also, by a stroke of luck, I found one of the DVDs from my old batch (the one that worked) on the ground of my room. Of course, I pop it in my DVD burner, and it works fine, (I belive) confirming my suspicion this isn't a hardware/software problem (or at least not a hardware problem in that my burner doesn't like these discs.) I'm gonna take this 100 pack I bought back, and get some "quality" media, and I'll let everyone know how that works out.
|
AfterDawn Addict
|
10. August 2005 @ 04:54 |
Link to this message
|
|
@wopPi
Get some good Verbatim, Maxell, Sony or Fuji in the future, no more CMC Mag.
This message has been edited since posting. Last time this message was edited on 17. August 2005 @ 03:06
|
|
wopPi
Newbie
|
10. August 2005 @ 14:42 |
Link to this message
|
|
A little update for everyone:
I went out and returned those Memorex DVDs I got, and got a new pack of Verbatim's. They didn't work. This is getting very frustrating. I suppose I'm gonna have to try to find those Memorex one's that I used that actually work, or just go through a bunch of brands till I find another one that works... Unless, of course, someone has a solution for me.
|
Moderator
|
10. August 2005 @ 14:47 |
Link to this message
|
|
pls post latest section of logfile just in case you/we missed something...
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
eruname
Newbie
|
10. August 2005 @ 14:58 |
Link to this message
|
Try Sony, I've worked with that and had good results. But I don't think that the media's the problem. Check which versions of DVDD and DVDShrink you have. Also, try installing the latest Nero and try again. Good luck!
|
|
wopPi
Newbie
|
10. August 2005 @ 15:05 |
Link to this message
|
I'm using both the latest versions of Decrypter and Shrink. And I don't believe its a media problem, per se, but that my burner doesn't want to cooperate with these disks, despite updating the firmware. Is there any other way I can get a log like the one I posted earlier from a program besides Nero? Cause I really dont want to download the update unless its really necessary. (I will do it, though, if there's no other way.)
|
Moderator
|
10. August 2005 @ 15:07 |
Link to this message
|
|
the log is in c:\program files\ahead\nero\nerohistory.log.
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
wopPi
Newbie
|
10. August 2005 @ 15:12 |
Link to this message
|
As I said above, I completely uninstalled Nero with plans to update it, but decided to just use DVD Decrypter to write DVDs.. As I also said above, if I need to, I'll reinstall Nero with the latest update to get an updated log.
|
Moderator
|
10. August 2005 @ 15:16 |
Link to this message
|
|
i'd forgotten that you'd uninstalled (i'm subscribed to a fair few posts).
in decrypter click on view/log, then it'll display/create a logfile.
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
deaseil
Junior Member
|
10. August 2005 @ 15:41 |
Link to this message
|
|
|
Moderator
|
10. August 2005 @ 15:46 |
Link to this message
|
|
lol hello again mister '1%'er
:)
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
deaseil
Junior Member
|
10. August 2005 @ 16:06 |
Link to this message
|
|
wsup creaky :) good to see u again. How long u been a member here?
|
Moderator
|
10. August 2005 @ 16:39 |
Link to this message
|
|
I've been here 8months
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
MrMondo
Newbie
|
15. August 2005 @ 21:14 |
Link to this message
|
Tying to fix similar problem. Attached is Nero express error log. I am not trying anything complicated just simple backup of about 4.5 gig of data. My system is new and the media was part of a combo purchase with the drive from newegg. Drive is:
LITE-ON Black 16X DVD+R 8X DVD+RW 4X DVD+R DL 16X DVD-R 6X DVD-RW 16X DVD-ROM 48X CD-R 24X CD-RW 48X CD-ROM 2M Cache IDE DVD Burner - Retail
Model #: SOHW-1693S Black
Item #: N82E16827106988
and media is:
LEGACY 4.7GB 8X DVD-R 100 Pack Cake Box Disc - Retail
Model #: R8X100CB
Item #: N82E16817131036
Installed the Nero software included with the drive and since uninstalled the INCD components after reading suggestions above.
Here is the log file; And I truly appreciate your help (BTW the drive has burned CD-Rs with no problem
____________________________________________________
* Name and serial number removed*
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 8/13/2005 2:14:11 PM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 5:33:44 PM
Nero version: 6.3.1.26 (Nero Express)
Recorder: <LITE-ON DVDRW SOHW-1693S>Version: KS04 - HA 0 TA 0 - 6.3.1.26
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <LITE-ON DVDRW SOHW-1693S>Version: KS04 - HA 0 TA 0 - 6.3.1.26
Adapter driver: <atapi> HA 0
=== Scsi-Device-Map ===
CdRomPeripheral : LITE-ON DVDRW SOHW-1693S atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVD SOHD-16P9S atapi Port 0 ID 1 DMA: On
DiskPeripheral : ST3160827AS atapi Port 1 ID 0 DMA: On
OtherPeripheral : SI Pseudo Device 0000 Si3114r5 Port 5 ID 16 DMA: Off
=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-1693S E: CDRom0
LITE-ON DVD SOHD-16P9S D: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1047788kB)
Free physical memory: 136MB (139356kB)
Memory in use : 86 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
16.8.2005
ISO compilation
12:14:00 AM #1 Text 0 File Isodoc.cpp, Line 6083
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
12:14:00 AM #2 Text 0 File Reader.cpp, Line 126
Reader running
12:14:00 AM #3 Text 0 File Writer.cpp, Line 124
Writer LITE-ON DVDRW SOHW-1693S running
12:14:00 AM #4 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
12:14:00 AM #5 Text 0 File Burncd.cpp, Line 3152
Turn on Disc-at-once, using DVD media
12:14:01 AM #6 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2233695 (496:22.45, 4362MB)
12:14:01 AM #7 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD)
12:14:01 AM #8 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: LITE-ON DVDRW SOHW-1693S, Media type: DVD-R
Disc Manufacturer: GSC003 -
Disc Application Code: 64, Disc Physical Code: 193
12:14:01 AM #9 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:14:01 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2233696 (2233696) = #2233696/496:22.46
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2233696 blocks [LITE-ON DVDRW SOHW-1693S]
--------------------------------------------------------------
12:14:01 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [LITE-ON DVDRW SOHW-1693S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4574609408, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2233696 | lead-out | 1 | 0x00 | 0x41
12:14:01 AM #12 Phase 24 File dlgbrnst.cpp, Line 1855
Caching of files started
12:22:16 AM #13 Text 0 File Burncd.cpp, Line 4163
Cache writing successful.
12:22:16 AM #14 Phase 25 File dlgbrnst.cpp, Line 1855
Caching of files completed
12:22:16 AM #15 Phase 36 File dlgbrnst.cpp, Line 1855
Burn process started at 8x (11,080 KB/s)
12:22:16 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:22:17 AM #17 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 6:58,175 (418175ms) -> OK
12:22:17 AM #18 Text 0 File DVDR.cpp, Line 2011
Recording mode: Sequential Recording Mode
12:22:17 AM #19 Text 0 File Mmc.cpp, Line 20794
Set BUFE: supported -> ON , SMART-BURN : OFF
12:22:17 AM #20 Text 0 File DVDR.cpp, Line 2152
Start write address at LBA 0
DVD high compatibility mode: Yes
12:22:17 AM #21 Text 0 File Cdrdrv.cpp, Line 8228
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 20 01 02 04 06 08 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
12:23:06 AM #22 Text 0 File Cdrdrv.cpp, Line 1297
00:23:06.500 - LITE-ON DVDRW SOHW-1693S\H0 T0 : Queue again later
12:25:35 AM #23 SCSI -1046 File Cdrdrv.cpp, Line 1445
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x03020000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 0x00 0x00 0x00 0x02 0xC0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05
12:25:35 AM #24 CDR -1046 File Writer.cpp, Line 304
Illegal disc
12:25:35 AM #25 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
12:25:35 AM #26 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
12:25:36 AM #27 Text 0 File DVDR.cpp, Line 2394
EndDAO: Last written address was 703
12:25:36 AM #28 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK
12:25:36 AM #29 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK
12:25:36 AM #30 Phase 38 File dlgbrnst.cpp, Line 1855
Burn process failed at 8x (11,080 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 8/13/2005 2:14:11 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/11/2005 6:28:13 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 1:59:42 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
________________________________________________________________
BTW I tried this with smart burn enabled and 4x speed and had same result.
|
Moderator
|
16. August 2005 @ 03:38 |
Link to this message
|
@MrMondo -
Quote:
Nero version: 6.3.1.26 (Nero Express)
- that's way old, update to latest, 6.6.0.16
Quote:
Recorder: <LITE-ON DVDRW SOHW-1693S>Version: KS04
- quite a new drive; EDITED HERE - as KS04 is 2 revisions behind. oops on my part!
Quote:
CdRomPeripheral : LITE-ON DVDRW SOHW-1693S atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVD SOHD-16P9S atapi Port 0 ID 1 DMA: On
DiskPeripheral : ST3160827AS atapi Port 1 ID 0 DMA: On
OtherPeripheral : SI Pseudo Device 0000 Si3114r5 Port 5 ID 16 DMA: Off
- i'd normally say DMA should be ON, but i don't recognise that last device - what is that last one ?, (i'm guessing you probably don't need to reset DMA for that one, depending on what it is)
Quote:
Physical memory : 1023MB (1047788kB)
Free physical memory: 136MB (139356kB)
Memory in use : 86 %
- a-ha, you're gonna have to close down a lot more stuff prior to burns, you've got virtually nothing left there
Quote:
Recorder: LITE-ON DVDRW SOHW-1693S, Media type: DVD-R
Disc Manufacturer: GSC003 -
Disc Application Code: 64, Disc Physical Code: 193
- hmmm, media i don't think is much good at all...
Quote:
Illegal disc
- i'd say try better media
Quote:
Burn process failed at 8x (11,080 KB/s)
- try burning at 4x (or lower on that iffy media!). get better media for that nice new burner that you have..
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
This message has been edited since posting. Last time this message was edited on 17. August 2005 @ 23:04
|
|
MrMondo
Newbie
|
16. August 2005 @ 16:29 |
Link to this message
|
Thanks for your analysis. I just made another coaster in order to confirm it is not a memory problem. I was pretty sure i had done this from a fresh reboot and confirmed it by doing the proecess again with task manager up on the performance tab. Prior to opening Nero I had about 75% of my 1 gig of memory avalable (1 gig of ram should be enough right!) Anyway during the file cache process of Nero the system cache shot up to over 700meg leaving around 200 meg available after the file cache the read buffer started and Nero grabbed around 100 meg of ram leaving very little in available memory. It still failed during the attempt to write the leadin after a few minutes (the disk shows physical change for about an inch from the center) This doesnt seem to be an issue of too many things running but it may indicate a problem with the configuration or the Nero software.
My next step will be to try to figure out how to upgrade from the Nero that came with my drive to the newer one you recomend (hopefully this wont require a purchase). I will update you after, in the mean time if you know how i should proceed with the upgrade or have any other thoughts Id appreciate it.
Btw as I noted on the bottom of my previous post i did try this at 4x and had the same result. While I imagine this media is not the best, one would think it would be capable of use as a data dvd, after all it was sold in conjunction with the drive.
|
|
MrMondo
Newbie
|
16. August 2005 @ 16:32 |
Link to this message
|
|
Never mind about the how do i update, whoda thunk it woulda been that simple!
|
|
Advertisement
|
|
|
|
MrMondo
Newbie
|
16. August 2005 @ 17:28 |
Link to this message
|
Well, I updated the Nero, and same problem. Ill attach this log. Guess I have to pick up some quality media (what should i get that would rule out media as the problem) and hope not to make more pretty shiny (useless) disks... If that doesnt work any other ideas before i start worrying my drive has a hardware problem.
log file:
*
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 8/13/2005 2:14:11 PM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
(Nero Express)
Recorder: <LITE-ON DVDRW SOHW-1693S>Version: KS04 - HA 0 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <LITE-ON DVDRW SOHW-1693S>Version: KS04 - HA 0 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 0
=== Scsi-Device-Map ===
CdRomPeripheral : LITE-ON DVDRW SOHW-1693S atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVD SOHD-16P9S atapi Port 0 ID 1 DMA: On
DiskPeripheral : ST3160827AS atapi Port 1 ID 0 DMA: On
OtherPeripheral : SI Pseudo Device 0000 Si3114r5 Port 5 ID 16 DMA: Off
=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-1693S E: CDRom0
LITE-ON DVD SOHD-16P9S D: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (83886080) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1047788kB)
Free physical memory: 132MB (136000kB)
Memory in use : 87 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
16.8.2005
ISO compilation
9:09:32 PM #1 Text 0 File Isodoc.cpp, Line 6356
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
9:09:32 PM #2 Text 0 File Reader.cpp, Line 127
Reader running
9:09:32 PM #3 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW SOHW-1693S running
9:09:32 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
9:09:32 PM #5 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
9:09:32 PM #6 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2233695 (496:22.45, 4362MB)
9:09:32 PM #7 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
9:09:32 PM #8 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: LITE-ON DVDRW SOHW-1693S, Media type: DVD-R
Disc Manufacturer: GSC003 -
Disc Application Code: 64, Disc Physical Code: 193
9:09:32 PM #9 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
9:09:32 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2233696 (2233696) = #2233696/496:22.46
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2233696 blocks [LITE-ON DVDRW SOHW-1693S]
--------------------------------------------------------------
9:09:32 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [LITE-ON DVDRW SOHW-1693S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4574609408, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2233696 | lead-out | 1 | 0x41 | 0x00
9:09:33 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
9:17:51 PM #13 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
9:17:51 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
9:17:51 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11,080 KB/s)
9:17:51 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
9:17:51 PM #17 Text 0 File DVDR.cpp, Line 2379
Recording mode: Sequential Recording Mode
9:17:51 PM #18 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON
9:17:51 PM #19 Text 0 File DVDR.cpp, Line 2534
Start write address at LBA 0
DVD high compatibility mode: Yes
9:17:51 PM #20 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 20 01 02 04 06 08 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
9:18:51 PM #21 Text 0 File Cdrdrv.cpp, Line 1286
21:18:51.578 - LITE-ON DVDRW SOHW-1693S\H0 T0 : Queue again later
9:21:33 PM #22 SCSI -1046 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x033B0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 0x00 0x00 0x00 0x02 0xC0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05
9:21:33 PM #23 CDR -1046 File Writer.cpp, Line 311
Illegal disc
9:21:33 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
9:21:33 PM #25 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
9:21:34 PM #26 Text 0 File DVDR.cpp, Line 2774
EndDAO: Last written address was 703
9:21:34 PM #27 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 8x (11,080 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 8/13/2005 2:14:11 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/11/2005 6:28:13 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 1:59:42 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
