|
Hi,
I'm Tom.
I use DVD Shrink to backup my DVD's, and I have always used a Pioneer DVR-107D using an IDE interface.
Now I've got the Plextor PX-716SA DL, which uses the SATA interface.
With both Burners, when I select backup, I get to the Burn Setting's tab, which I select Maximum, for speed. And then below speed, is this
other stuff.
(Now this is where I get confussed)
Using the Pioneer Burner with the IDE interface:
This box is checked.
|+| Book type DVD-Rom - The entire line is not highlighted.
This box isn't checked.
|_| Burn at least 30mm (DVD+R/RW high compatibility mode)
The entire line is highlighted.
_____________________________________________________________________
Now using the Plextor DL, with the SATA interface:
Should I check this box?
|_| Book type DVD-Rom - The entire line is now highlighted.
This Box isn't checked.
|_| Burn at least 30mm (DVD+R/RW high compatibility mode)
_____________________________________________________________________
I'm just a bit confussed here, and want to know if I should place a check mark in the box next to (Book type DVD-Rom)?
I know you never want to check the other box:
Burn at least 30mm (DVD+R/RW high compatibility)
____________________________________________________________________
Can anyone explain to me what these two different choices are for, and when you would want to use them?
____________________________________________________________________
Thanks so much for your time in reading my question.
Sincerely,
Tomroxie
Tom Waterloo
Happy Lucky Guy
Happy = Roxie
3.2Ghz Intel P4 CPU /800 FSB/HT
Gigabyte 8KNXP Motherboard
2 Gig Corsair 3200 DDR 400Mhz
2 DVD Burners:
Pioneer DVR-107D 8x DVD+R/DVD-R Burner
Pioneer DVR-109 8xDVD+R/DVD-R 6X Dual Layer DVD+R DL
_____________________________________________
Ati-Radeon 9200 series
WD-Raptor 10K Single SATA
Silicon Sil3112 Mass Storage Controllers.
O/S Windows XP Home
|
