|
|
|
HELP ME!! SHRINK ERRORS GALORE
|
|
|
fema69
Junior Member
|
24. September 2005 @ 13:38 |
Link to this message
|
|
DOES Anyone here get this error with Shrink? I ripped and burn on my friends laptop okay, but when i use my desktop, I get this mess.
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 5:33:44 PM
Nero API version: 6.3.1.19
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <SONY DVD RW DRU-710A> Version: BYX4 - HA 3 TA 0 - 6.3.1.19
Adapter driver: <atapi> HA 3
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800JB-00ETA0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6L200S0 atapi Port 2 ID 0 DMA: On
CdRomPeripheral : SONY DVD RW DRU-710A atapi Port 3 ID 0 DMA: On
=== CDRom-Device-Map ===
SONY DVD RW DRU-710A D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1535MB (1572336kB)
Free physical memory: 987MB (1011012kB)
Memory in use : 35 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
24.9.2005
NeroAPI
4:50:40 PM #1 Phase 112 File APIProgress.cpp, Line 273
DVD-Video files reallocation started
4:50:40 PM #2 Phase 114 File APIProgress.cpp, Line 273
DVD-Video files reallocation completed (no file modified)
4:50:40 PM #3 Phase 111 File APIProgress.cpp, Line 273
DVD-Video files sorted
4:50:40 PM #4 Text 0 File Reader.cpp, Line 118
Reader running
4:50:40 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 817
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
4:50:40 PM #6 Text 0 File Writer.cpp, Line 124
Writer SONY DVD RW DRU-710A running
4:50:41 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
4:50:41 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
4:50:41 PM #9 Text 0 File Burncd.cpp, Line 3173
Turn on Disc-At-Once, using DVD media
4:50:41 PM #10 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2202191 (489:22.41, 4301MB)
4:50:41 PM #11 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO
4:50:41 PM #12 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: SONY DVD RW DRU-710A, Media type: DVD-R
Disc Manufacturer: MCC 02 - RG20
Disc Application Code: 64, Disc Physical Code: 193
4:50:41 PM #13 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
4:50:41 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2202192 (2202192) = #2202192/489:22.42
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2202192 blocks [SONY DVD RW DRU-710A ]
--------------------------------------------------------------
4:50:41 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [SONY DVD RW DRU-710A ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4510089216, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2202192 | lead-out | 1 | 0x00 | 0x41
4:50:41 PM #16 Phase 24 File APIProgress.cpp, Line 273
Caching of files started
4:50:41 PM #17 Text 0 File Burncd.cpp, Line 4183
Cache writing successful.
4:50:41 PM #18 Phase 25 File APIProgress.cpp, Line 273
Caching of files completed
4:50:41 PM #19 Phase 36 File APIProgress.cpp, Line 273
Burn process started at 8x (11,080 KB/s)
4:50:41 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
4:50:41 PM #21 Text 0 File DVDR.cpp, Line 1932
Recording mode: Sequential Recording Mode
4:50:41 PM #22 Text 0 File Mmc.cpp, Line 20464
Set BUFE: Power-Burn -> ON , Generic write control : ON
4:50:41 PM #23 Text 0 File DVDR.cpp, Line 2073
Start write address at LBA 0
DVD high compatibility mode: Yes
4:50:41 PM #24 Text 0 File Cdrdrv.cpp, Line 8128
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
4:50:41 PM #25 Text 0 File DVDR.cpp, Line 4817
Drive: SONY DVD RW DRU-710A
Book Type request: DVD-ROM
Changing the book type was finished with error code: 0
4:51:52 PM #26 SCSI -1106 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x0D790000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x03
4:51:52 PM #27 CDR -1106 File Writer.cpp, Line 304
Power calibration error
4:51:52 PM #28 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
4:51:52 PM #29 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
4:51:52 PM #30 Text 0 File DVDR.cpp, Line 2315
EndDAO: Last written address was -1
4:51:52 PM #31 Phase 38 File APIProgress.cpp, Line 273
Burn process failed at 8x (11,080 KB/s)
4:51:52 PM #32 Text 0 File AudioCompilationImpl.cpp, Line 828
DRM: DRM burn session terminated.
4:51:52 PM #33 Text 0 File AudioCompilationImpl.cpp, Line 857
DRM: Closing entire DRM handling. Bye.
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
ANYONE'S HELP WOULD BE GREATLY APPRECIATED.
THANK YOU.
pETE
Pete
|
|
Advertisement
|
|
|
|
|
Car.Mike
AfterDawn Addict
|
24. September 2005 @ 16:29 |
Link to this message
|
|
fema69 ,
Welcome to the forum
1. Update Nero as you are about 3 updates behind
2. SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x0D790000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Does not like the blank media you are using
3. 4:51:52 PM #27 CDR -1106 File Writer.cpp, Line 304
Power calibration error
When the burner try to read the disk for the info and calibrate the burn it can not do this . Try another disk
Also try and not book-type a (-)DVD as it can not be done. You can only booktype a (+) DVD
This message has been edited since posting. Last time this message was edited on 24. September 2005 @ 16:33
|
|
fema69
Junior Member
|
24. September 2005 @ 17:37 |
Link to this message
|
|
I did update and still got the error. I am using Verbatim. I thought this was a good Media? Did you say i need to use (+) disk instead of (-) disk? thank you.
PS.
You can tell all of that by reading the log i sent you? I need to learn this dude.
Pete
|
|
fema69
Junior Member
|
24. September 2005 @ 17:45 |
Link to this message
|
|
book type ?????
Pete
|
|
Car.Mike
AfterDawn Addict
|
24. September 2005 @ 18:15 |
Link to this message
|
fema69 ,
1.You are using Nero API version: 6.3.1.19 Using interface version: 6.3.1.4
It is up to 6.6.0.16. If you updated it did not work or install
2.Yes I saw that you were using good blank media but you might have had a bad disk. I then checked your burner's firmware to see if it was up to date and it was. Along w/ the Power Cal. error it has to be a bad disk or you might have gotten a bad batch.
Just make sure that you do not check change book type to DVD-Rom when you use (-) DVD's. Only do that when you use (+) DVD's
Try using + blank media ( Verbatim or Taiyo Yuden ) and then change the book type ( bitset) of the blank media. In (-)DVD you can not change the inner ring info as it is set by the manuf. but w/ (+) DVD's you can put the info on the inner ring and this tricks the DVD Player into thinking it is a DVD-Rom disk and thusly makes it more compatible and plays in more standalone players
|
|
fema69
Junior Member
|
24. September 2005 @ 19:26 |
Link to this message
|
|
it must be a bad batch because i bought them at Best Buy on sale, I mean really on sale--like $4.99 per 50pak. I thought it must of been a mistake on their part but they checked it and they told me it was a back to school special. Now i know it was a back to screwl pete sale. :)
Now if i am changing the book type I am doing it without my knowledge because I dont know how? How do I change this?
Pete
|
AfterDawn Addict
|
24. September 2005 @ 22:54 |
Link to this message
|
Hi Pete,
You may have the "Book type DVD-ROM" box checked in Shrink.
When you press the "Backup!" button, the Backup DVD menu opens. Go to the burn settings tab and uncheck the box.
This is also where you set the burn speed. Slowing the burn speed down may allow you to use those discs. Make sure you have a blank disc spun up in the burner before setting the burn speed.
As CarMike mentioned, getting your Nero updated will help, heres a link to Nero's update page:
http://nero.com/us/nero-up.php
You need package 1 and package 2 mainly.
|
|
fema69
Junior Member
|
25. September 2005 @ 00:02 |
Link to this message
|
i did all you told me to do and i am still getting the error. this is what i got after 1 minute into the lead-in writing:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero API version: 6.6.0.16
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 16b
Recorder: <SONY DVD RW DRU-710A> Version: BYX4 - HA 3 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 3
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800JB-00ETA0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6L200S0 atapi Port 2 ID 0 DMA: On
CdRomPeripheral : SONY DVD RW DRU-710A atapi Port 3 ID 0 DMA: On
=== CDRom-Device-Map ===
SONY DVD RW DRU-710A D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1535MB (1572336kB)
Free physical memory: 944MB (967132kB)
Memory in use : 38 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
25.9.2005
NeroAPI
3:59:38 AM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
3:59:38 AM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
3:59:38 AM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
3:59:38 AM #4 Text 0 File Reader.cpp, Line 127
Reader running
3:59:38 AM #5 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
3:59:38 AM #6 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DRU-710A running
3:59:38 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
3:59:38 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
3:59:38 AM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
3:59:38 AM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2202191 (489:22.41, 4301MB)
3:59:38 AM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO
3:59:38 AM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: SONY DVD RW DRU-710A, Media type: DVD-R
Disc Manufacturer: MCC 02 - RG20
Disc Application Code: 64, Disc Physical Code: 193
3:59:38 AM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
3:59:38 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2202192 (2202192) = #2202192/489:22.42
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2202192 blocks [SONY DVD RW DRU-710A]
--------------------------------------------------------------
3:59:38 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [SONY DVD RW DRU-710A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4510089216, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2202192 | lead-out | 1 | 0x41 | 0x00
3:59:38 AM #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
3:59:38 AM #17 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
3:59:38 AM #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
3:59:38 AM #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 8x (11,080 KB/s)
3:59:39 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
3:59:39 AM #21 Text 0 File DVDR.cpp, Line 2379
Recording mode: Sequential Recording Mode
3:59:39 AM #22 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : ON
3:59:39 AM #23 Text 0 File DVDR.cpp, Line 2534
Start write address at LBA 0
DVD high compatibility mode: Yes
3:59:39 AM #24 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
4:00:44 AM #25 SCSI -1106 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x00C60000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x03
4:00:44 AM #26 CDR -1106 File Writer.cpp, Line 311
Power calibration error
4:00:44 AM #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
4:00:44 AM #28 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
4:00:44 AM #29 Text 0 File DVDR.cpp, Line 2774
EndDAO: Last written address was -1
4:00:45 AM #30 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 8x (11,080 KB/s)
4:00:45 AM #31 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
4:00:45 AM #32 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Pete
|
|
Car.Mike
AfterDawn Addict
|
25. September 2005 @ 04:39 |
Link to this message
|
|
Pete
It is still showing the blank media is the problem. The media you purchased might only be good for Spreadsheets but it is not liked in that burner. See is you can find Sony DVD's and try them. Buy a small amount and if they work then you can start using that brand. Most of the time the better media is Verbatim, Taiyo Yuden, Ritek, and Maxell. The reason I suggested Sony disks is that you have a Sony burner and the burner should recog that brand. Try that and let us know if it works
|
|
fema69
Junior Member
|
25. September 2005 @ 13:48 |
Link to this message
|
|
I thought Verbatim was a good media? I think Sony is Monopolizing this end of the Market like Microsoft has for many years by forcing the public to use Explorere. Do you think this may be the case here?
If that doesn't work do you think I should change burning software?
Pete
Pete
|
|
Car.Mike
AfterDawn Addict
|
25. September 2005 @ 14:36 |
Link to this message
|
|
fema69 ,
It might be that Verbatim did not send a blank dvd for Sony to look at and write a firmware update for. There are Sony DVD's that you can buy locally or at least in my area there are. If you put a Sony disk in and it does not work I would say it might be the burner. Have you tried to used a DVD cleaning disk to clean the lense of the laser? If the laser can not properly see the ID code on the blank media it can not calibrate the disk. Lets try the cleaning disk first and then try Sony Media second
|
AfterDawn Addict
|
25. September 2005 @ 16:26 |
Link to this message
|
A power calibration error is an error that occurs when the DVD fails to return a correct response to the burner.
Think of it like this:
I have a pile of apples. I toss you an apple, you cut it in half and toss me back the halves. For every apple I toss, I should get two halves back. If I start getting the wrong number of halves back, then I know there is something wrong.
During the lead-in the first 15 step OPC is completed. By doing this, correct laser power levels are established.
This is done by burning a series of "pits" in the Power Calibration Area (PCA) on the inner portion of the disc at different power levels and then reading them back. This is why a burner can adjust to various types of media. If no speed is selected then the maximum speed allowed by the results of the OPC is used to begin the burn.
OPC gives burners the ability to use blank media that have not been specifically tested in the burner. It is better to use name brand media that has been tested though. The tested media is part of an established list maintained in the burners firmware that will help the burner set the correct parameters for the burn. Whew.
During the course of the burn, "Running Optimum Power Control checks are performed constantly. This allows dust and fingerprints to be burned through in many cases.
So as the burn proceeds, laser power is adjusted up or down as needed. At some point though when it cannot be adjusted enough, the running OPC will set a flag and the burn process will stop.
By setting your burn speed slower, more time is given for this process to occur. More laser power is required at faster burn speeds.
Try a slower burn speed. Cleaning your laser may help as Car.Mike said. I would even try to blow out the burner with a bit of canned air.
-------------------------------------------
Fun reading from Pioneer Technical Services:
Quote:
The DVD specification, however, adopts the concept that all information about the data content is contained within a file system, and exists within the data itself. Therefore, the information written in the lead-in (middle region) is information necessary only for the drive itself, such as disc compatibility and drive control information. (There are also regions for manufacturer information or related to copying.)
This information is called control data, and is written in the 17.5 to 105 tracks located inside the data region start radius of 24 mm. One block of the control data is an ECC block (16 sectors), and is written across 192 blocks, or in other words, is repeated 192 times. The first sector of the control data contains physical format information. The physical format information describes what type of disc it is, conforming to what revision of the specification. It also describes the disc size, the maximum transfer rate with consideration for portable players, number of layers, track path type, whether the disc is all ROM or partial ROM, recording linear density, track density, and start and end sector numbers.
Starting 16 tracks inside of the control tracks and covering two blocks of length is recorded a reference code used for equalizer calibration. Inside of this, ROM discs also contain a region of all-zero data extending inward to a radius of 22.6 mm.
|
Senior Member
|
25. September 2005 @ 17:35 |
Link to this message
|
I get a 'Power calibration error' or 'Calibration area (almost) full' error message. Why?
Power Calibration is controlled by the recorder.
Before any write operation, all recorders must do a 15 step power test to determine the optimum power for writing to the CD; this is called "Optimum Power Calibration"(OPC). During the write, it continues to do this test to get the best write throughout the whole CD; this is called "Running Optimum Power Calibration" (ROPC).
This whole process is controlled by the recorder, though initiated by programs such as Nero. There is an area on the inner part of the CD for the test and test data info to be stored. You can use this area up to 999 times.
If you receive the "Power calibration error" or "Power calibration area is (almost) full" error message, the cause will be either poor media, poor power, or a defective recorder.
Please try the following solutions:
1. Update the firmware of your recorder. Please check the manufacturer's website for the latest version.
2. Try another brand of media.
3. Try different power connectors, and for recorders, do not share power with other devices. It needs its own power connector. If the error occurs with an external recorder, the power source in the chassis could be the cause. As a test, try to take the recorder out of the external chassis and connect it internal.
4. Try different configurations, such as taking the CD-ROM to the primary IDE bus as slave and have only the recorder connected to the secondary IDE bus as master.
5. Send the recorder in for service.
|
|
matty316
Newbie
|
25. September 2005 @ 20:35 |
Link to this message
|
|
|
Senior Member
|
25. September 2005 @ 21:00 |
Link to this message
|
This message has been edited since posting. Last time this message was edited on 25. September 2005 @ 21:02
|
|
matty316
Newbie
|
26. September 2005 @ 08:30 |
Link to this message
|
|
I see, it still has to do with the media though. For some reason the drive doesn't like the media, MCC 02 - RG20 is a good media code. Changing the media would be the first step that I would take next.
|
Moderator
|
1. October 2005 @ 08:58 |
Link to this message
|
@fema69 - as i've advised you in reply to one of your PM's, i'm having to request your other duplicate threads be closed. i am having a problem locating the correct thread to continue helping you and the PC i'm using does not have sufficient resource to open all your numerous duplicate Nero logs to figure out where we got to with your problem.
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
|
Advertisement
|
|
|
Moderator
|
1. October 2005 @ 10:21 |
Link to this message
|
|
fema69
You need to cease with the constant multiposting. In addition to being very confusing for those trying to help you it's also against forum rules and can get you banned if you continue.
Consider this your first friendly warning ;)
My killer sig came courtesy of bb "El Jefe" mayo.
The Forum Rules You Agreed To! http://forums.afterdawn.com/thread_view.cfm/2487
"And there we saw the giants, and we were in our own sight as grasshoppers, and so we were in their sight" - Numbers 13:33 This message has been edited since posting. Last time this message was edited on 1. October 2005 @ 10:30
|
|
