|
|
|
No video visible after using DVD Shrink
|
|
|
benjazach
Newbie
|
18. October 2005 @ 09:23 |
Link to this message
|
|
I've copyed DVDs before with DVD Shrink and i just copied Ong Bak, and the audio is there but there doesn't seem to be any video. just a black screen.
i have a Sony DVDRW DRU700A
using Datawrite Titanium DVD-R
thanks
|
|
Advertisement
|
|
|
|
Moderator
|
18. October 2005 @ 10:35 |
Link to this message
|
hi, what's the burning program you used ?.
in the meantime, here's what i recently discovered/posted re Datawrite Titanium DVD-R (snippet from http://forums.afterdawn.com/thread_view.cfm/244549) -
Quote:
just did a quick search as to which disc manufacturers Datawrite use for their Titanium discs - hmmm, if it's 8x -R discs you're using, the disc manufacturer could well be CMC Magnetics - if so, oh dear!.
edit re the 8x -R discs - just checked some more and (oh dear) these come in 3 differing quality in disc manufacturers - CMC MAG or MCC02RG20 or TTG02 - in my opinion the only decent ones there are the MCC ones. The problem is i bet there's no way to tell which ones are which, simply from looking at the packaging ie one day you might buy a tub of these and get MCC-manufactured disc (top stuff) and another day you might pick up an identical tub and they'd be CMC-manufactured (atrocious).
if they're 16x -R discs the quality could well be a mixed bag depending on if you have MCC03RG20 discs (top discs) or TTH02 discs (hmmm i don't believe they're much good at all, certainly no comparison to MCC discs)
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
|
benjazach
Newbie
|
18. October 2005 @ 14:11 |
Link to this message
|
well, thats balls. every time i buy bloody blank dvds there's a prob
i was using Nero i believe as the burning program. gonna give DVD Decrypter a go and get back to you
thanks again
|
Moderator
|
18. October 2005 @ 14:34 |
Link to this message
|
let's have LAST section of your Nero log which lives in c:\program files\ahead\nero\nerohistory.log but DO NOT post your serial number which usually begins with '1A21' or similar. You can differentiate sections via this section divider "====== *** Nero-Burning Rom, History File *** ======"
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
benjazach
Newbie
|
19. October 2005 @ 01:34 |
Link to this message
|
These are the last three logs, first one attempted straight from original DVD to new, second was from decrypted files to new, and the third is an attempt at a film that has worked before.
thanks for your help
====== *** Nero-Burning Rom, History File *** ======
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17/07/2002 10:03:20
ahead WinASPI: File 'E:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero API version: 6.6.0.16
Using interface version: 6.3.1.4
Installed in: E:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 16b
Recorder: <SONY DVD RW DRU-700A> Version: VY08 - HA 1 TA 1 - 6.6.0.16
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD2000JB-00GVA0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD1600JB-00EVA0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PLEXTOR DVD-ROM PX-130A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SONY DVD RW DRU-700A atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
PLEXTOR DVD-ROM PX-130A D: CDRom0
SONY DVD RW DRU-700A F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1047556kB)
Free physical memory: 596MB (610804kB)
Memory in use : 41
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
18.10.2005
NeroAPI
17:57:33 #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
17:57:34 #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
17:57:34 #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
17:57:34 #4 Text 0 File Reader.cpp, Line 127
Reader running
17:57:34 #5 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DRU-700A running
17:57:34 #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
17:57:34 #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
17:57:34 #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
17:57:34 #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
17:57:34 #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286175 (508:02.25, 4465MB)
17:57:34 #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO
17:57:34 #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: SONY DVD RW DRU-700A, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AE1
Disc Application Code: 64, Disc Physical Code: 193
17:57:34 #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
17:57:34 #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286176 (2286176) = #2286176/508:2.26
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286176 blocks [SONY DVD RW DRU-700A]
--------------------------------------------------------------
17:57:34 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [SONY DVD RW DRU-700A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682088448, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286176 | lead-out | 1 | 0x41 | 0x00
17:57:34 #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
17:57:34 #17 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
17:57:34 #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
17:57:34 #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 4x (5,540 KB/s)
17:57:34 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
17:57:34 #21 Text 0 File DVDR.cpp, Line 2379
Recording mode: Sequential Recording Mode
17:57:34 #22 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : ON
17:57:34 #23 Text 0 File DVDR.cpp, Line 2534
Start write address at LBA 0
DVD high compatibility mode: Yes
17:57:34 #24 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
17:58:01 #25 Text 0 File Cdrdrv.cpp, Line 1286
17:58:01.546 - SONY DVD RW DRU-700A\H1 T1 : Queue again later
18:12:35 #26 Text 0 File WriterStatus.cpp, Line 116
<SONY DVD RW DRU-700A > start writing Lead-Out at LBA 2286176 (22E260h), lenght 0 blocks
18:12:35 #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
18:12:36 #28 Text 0 File DVDR.cpp, Line 2774
EndDAO: Last written address was 2286175
18:12:58 #29 Phase 37 File APIProgress.cpp, Line 276
Burn process completed successfully at 4x (5,540 KB/s)
18:12:59 #30 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
18:12:59 #31 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 17/07/2002 09:05:10
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** NeroAPI, History File *** ======
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17/07/2002 10:03:20
ahead WinASPI: File 'E:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero API version: 6.6.0.16
Using interface version: 6.3.1.4
Installed in: E:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 16b
Recorder: <SONY DVD RW DRU-700A> Version: VY08 - HA 1 TA 1 - 6.6.0.16
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD2000JB-00GVA0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD1600JB-00EVA0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PLEXTOR DVD-ROM PX-130A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SONY DVD RW DRU-700A atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
PLEXTOR DVD-ROM PX-130A D: CDRom0
SONY DVD RW DRU-700A F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1047556kB)
Free physical memory: 589MB (603764kB)
Memory in use : 42
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
18.10.2005
NeroAPI
18:33:00 #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
18:33:00 #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
18:33:00 #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
18:33:01 #4 Text 0 File Reader.cpp, Line 127
Reader running
18:33:01 #5 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DRU-700A running
18:33:01 #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
18:33:01 #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
18:33:01 #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
18:33:01 #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
18:33:01 #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286175 (508:02.25, 4465MB)
18:33:01 #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO
18:33:01 #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: SONY DVD RW DRU-700A, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AE1
Disc Application Code: 64, Disc Physical Code: 193
18:33:01 #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
18:33:01 #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286176 (2286176) = #2286176/508:2.26
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286176 blocks [SONY DVD RW DRU-700A]
--------------------------------------------------------------
18:33:01 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [SONY DVD RW DRU-700A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682088448, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286176 | lead-out | 1 | 0x41 | 0x00
18:33:01 #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
18:33:01 #17 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
18:33:01 #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
18:33:01 #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 4x (5,540 KB/s)
18:33:01 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
18:33:01 #21 Text 0 File DVDR.cpp, Line 2379
Recording mode: Sequential Recording Mode
18:33:01 #22 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : ON
18:33:01 #23 Text 0 File DVDR.cpp, Line 2534
Start write address at LBA 0
DVD high compatibility mode: Yes
18:33:01 #24 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
18:33:27 #25 Text 0 File Cdrdrv.cpp, Line 1286
18:33:27.843 - SONY DVD RW DRU-700A\H1 T1 : Queue again later
18:48:02 #26 Text 0 File WriterStatus.cpp, Line 116
<SONY DVD RW DRU-700A > start writing Lead-Out at LBA 2286176 (22E260h), lenght 0 blocks
18:48:02 #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
18:48:02 #28 Text 0 File DVDR.cpp, Line 2774
EndDAO: Last written address was 2286175
18:48:24 #29 Phase 37 File APIProgress.cpp, Line 276
Burn process completed successfully at 4x (5,540 KB/s)
18:48:25 #30 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
18:48:25 #31 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 17/07/2002 09:05:10
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** NeroAPI, History File *** ======
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17/07/2002 10:03:20
ahead WinASPI: File 'E:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero API version: 6.6.0.16
Using interface version: 6.3.1.4
Installed in: E:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 16b
Recorder: <SONY DVD RW DRU-700A> Version: VY08 - HA 1 TA 1 - 6.6.0.16
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD2000JB-00GVA0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD1600JB-00EVA0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PLEXTOR DVD-ROM PX-130A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SONY DVD RW DRU-700A atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
PLEXTOR DVD-ROM PX-130A D: CDRom0
SONY DVD RW DRU-700A F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1047556kB)
Free physical memory: 601MB (616408kB)
Memory in use : 41
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
18.10.2005
NeroAPI
23:39:15 #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
23:39:15 #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
23:39:15 #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
23:39:15 #4 Text 0 File Reader.cpp, Line 127
Reader running
23:39:15 #5 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DRU-700A running
23:39:15 #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
23:39:15 #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
23:39:15 #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
23:39:15 #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
23:39:15 #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286111 (508:01.36, 4465MB)
23:39:15 #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO
23:39:15 #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: SONY DVD RW DRU-700A, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AE1
Disc Application Code: 64, Disc Physical Code: 193
23:39:15 #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
23:39:15 #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [SONY DVD RW DRU-700A]
--------------------------------------------------------------
23:39:15 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [SONY DVD RW DRU-700A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286112 | lead-out | 1 | 0x41 | 0x00
23:39:16 #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
23:39:16 #17 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
23:39:16 #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
23:39:16 #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 4x (5,540 KB/s)
23:39:16 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
23:39:16 #21 Text 0 File DVDR.cpp, Line 2379
Recording mode: Sequential Recording Mode
23:39:16 #22 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : ON
23:39:16 #23 Text 0 File DVDR.cpp, Line 2534
Start write address at LBA 0
DVD high compatibility mode: Yes
23:39:16 #24 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
23:39:37 #25 Text 0 File Cdrdrv.cpp, Line 1286
23:39:37.890 - SONY DVD RW DRU-700A\H1 T1 : Queue again later
23:54:12 #26 Text 0 File WriterStatus.cpp, Line 116
<SONY DVD RW DRU-700A > start writing Lead-Out at LBA 2286112 (22E220h), lenght 0 blocks
23:54:12 #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
23:54:12 #28 Text 0 File DVDR.cpp, Line 2774
EndDAO: Last written address was 2286111
23:54:34 #29 Phase 37 File APIProgress.cpp, Line 276
Burn process completed successfully at 4x (5,540 KB/s)
23:54:35 #30 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
23:54:35 #31 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 17/07/2002 09:05:10
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** NeroAPI, History File *** ======
|
Moderator
|
19. October 2005 @ 09:33 |
Link to this message
|
Quote:
i just copied Ong Bak
- spooky, i'm just doing that movie now..
Quote:
Recorder: <SONY DVD RW DRU-700A> Version: VY08
- great burner, and firmware's up to date..
Quote:
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286175 (508:02.25, 4465MB)
- you're burning too close to outer edge of discs. If you use DVD Shrink, set target size to 4300MB in Shrink's preferences thus avoiding outer edge and not sacrificing much space
Quote:
Recorder: SONY DVD RW DRU-700A, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AE1
Disc Application Code: 64, Disc Physical Code: 193
- oh no i don't believe it, you've fouled that nice burner with those horrid CMC Mag discs! :)
Quote:
Burn process completed successfully at 4x (5,540 KB/s)
- hmmm, completed successfully - CMC Mag's... like Macauley Culkin in Home Alone says "i don't think so" :)
Quote:
Existing drivers:
- according to this paragraph your ATAPI drivers aren't loaded correctly (they're not listed here. i suspect those CMC Mag discs have something to do with that). fix via this - http://home.comcast.net/~bbmayo/FAQ.htm
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
This message has been edited since posting. Last time this message was edited on 19. October 2005 @ 09:34
|
AfterDawn Addict
|
19. October 2005 @ 16:28 |
Link to this message
|
|
Looks like 3 successful burns to me.
Definitely reduce the backup target for those dreaded cmags.
How are you viewing those backups when you get a black screen with only audio?
Standalone player: Check the remote,maybe it's set on for visually impaired?
Try playing one of those backups on the pc using the sony dru 700a.See it if also gives you a black screen.
HP a1118x-b/athlon 64-3300+/BenQ 1650 BCDC/LG 8163B/Modded Wii/Epson-R300 and Ty Watershields!!! |
Moderator
|
20. October 2005 @ 00:50 |
Link to this message
|
|
the whole point of dire media such as this is 3 successful burns does not mean 3 or 30 more successful/usable burns. do what you need to in order to use up the last of those Cmags but don't buy any more or you'll be back here again :)
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
benjazach
Newbie
|
20. October 2005 @ 05:43 |
Link to this message
|
|
thanks for all your help.
something very very very peculiar happened. i burnt those three as you know, black screen only. they've been sitting in the spindle for a couple of days now and i tried one - fine. tried the others - fine. so i decided to burn a new one. did that, tried it immediately - black screen. tried it today - fine. wierd.
do dvds need time to cool or set?
i didn't think so.
anyway all seems good.
thanks muchly
|
Moderator
|
20. October 2005 @ 09:57 |
Link to this message
|
|
'fraid i don't do/tolerate coasters/wasted money. this is the kind of thing you'll come to expect using subpar media. we've done the logfile analysis, next logical step is to try better media, then problem should go away hopefully..
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
Advertisement
|
|
|
AfterDawn Addict
|
20. October 2005 @ 13:10 |
Link to this message
|
Quote:
do dvds need time to cool or set?
Myself,no.I play them right out of the drive-using my stand alone player.
I've heard of other members drives really heating them up so they have to allow them to cool down.
|
|
