|
|
|
Sony DVD+R
|
|
|
slosten
Junior Member
|
27. October 2005 @ 09:12 |
Link to this message
|
|
About 6 months ago I purchased my first DVD Burner at the local Wal-Mart and just bought some Sony DVD+R's. I tried and tried to get a good burn and gave up. Just two days ago I was sent a link to your site. I was able to get one DVD to burn but it will only play in my PC and my stand alone player is supposed to be able to support DVD+R so I was wondering if these discs are junk or something.
They read Sony DVD+R Ver 1.2/1X-8X. They are 120min/4.7GB.
|
|
Advertisement
|
|
|
|
|
maveric34
Suspended due to non-functional email address
|
27. October 2005 @ 11:30 |
Link to this message
|
|
Can you give more specific info? What are you trying to burn? What program are you using? What type of DVD burner? Let me know....
|
|
slosten
Junior Member
|
27. October 2005 @ 11:34 |
Link to this message
|
|
DVD's. Shrink 3.2. Sony DRU-710A.
|
|
akyllonen
Member
|
27. October 2005 @ 11:43 |
Link to this message
|
|
I have the same burner and a couple hundred of these discs that are MADE IN JAPAN. Are your's the Japan or Taiwan ones? Also is your firmware up to date (listed in my sig.)? Some standalones are picky with media(one of mine hates Verbatims!)Some suggestions:
Burn @ 4x speed.
Try a few other standalones(friends/family).
Make sure you have the Made In Japan SONY's.
Do not multitask while burning.
Do a spyware/virus check on your computer.
Set your Booktype to DVD-ROM. (Burner is a rebadged Lite-On)
Also...what was wrong with your "bad burns" i.e Pixallation/skipping/freezes/doesn't play at all....
Your system specs?
Let us know ...
2.4 Celeron;512k ram; 80gig HD; 60gig HD; Windows XP(SP1).
Sony DRU-710A (BYX4)
DVD Shrink/DVD Decrypter.
TYG02;YUDEN002;MCC blanks.
Favorite Media: Sony 8x+R(MADE IN JAPAN)
Laptop: 1.4 Ghz;256k ram; 40 gig HD;Windows XP
NEC ND-6650A Burner
|
|
slosten
Junior Member
|
27. October 2005 @ 11:53 |
Link to this message
|
|
No, they are made in Taiwan. They wouldn't play at all in anything other than my PC.
AMD Athlon XP 1900+
1.60 GHz
224 MB of RAM
Sony DRU-710A(BYX5)
|
|
maveric34
Suspended due to non-functional email address
|
27. October 2005 @ 11:58 |
Link to this message
|
THis may sound like a stupid question but:
Are you using a decription tool before burning the dvd's?
If not, try DVD Decrypter, if you need to know how to do this let us know...
|
|
slosten
Junior Member
|
27. October 2005 @ 12:10 |
Link to this message
|
Just going straight to using Shrink followed by Nero software that came with my burner to burn the disc.
|
|
maveric34
Suspended due to non-functional email address
|
27. October 2005 @ 12:26 |
Link to this message
|
O.K. Try this:
For a DVD5 all you will need is DVD Decrypter. Open program, Select Mode>ISO>Read; in the first dropdown select the drive that the DVD is in, in the second point it to a spot on your HD (I have a folder set up called Video TS but I think that anywhere will do as long as you can find the file latter). Hit the button at the bottom, sit back and wait.
When done, Select Mode>ISO>Write; in the first dropdown select the ISO (or MDS decrypter will tell you if you get the wrong one, just let it decide) created above. In the second dropdown select your DVD Burner drive. Hit the button at the bottom, sit back and wait.
Now, for a DVD9 follow the first set of instructions above (Mode>ISO>Read). When this is done you need to mount the image, I use Daemon Tools. Then open DVD Shrink and burn as you normally would.
|
|
slosten
Junior Member
|
27. October 2005 @ 12:33 |
Link to this message
|
|
DVD-9 is all I have worked with. I have just been using the steps provided in the guide on this site and using just Shrink.
|
|
maveric34
Suspended due to non-functional email address
|
27. October 2005 @ 12:39 |
Link to this message
|
|
From the AD DVD Shrink Guide:
To make things easier, we will use DVD Shrink for ripping the DVD as well as transcoding its material. In some rare occassions DVD Shrink can't rip the disc correctly -- if you encounter such problems, rip the DVD to your HDD first by using DVD Decrypter as described in beginning of this guide and process the material from the HDD instead of DVD.
This message has been edited since posting. Last time this message was edited on 27. October 2005 @ 12:39
|
|
slosten
Junior Member
|
27. October 2005 @ 13:04 |
Link to this message
|
|
Yeah but I don't have problems while ripping I have problems while it is burning so I didn't figure it was a problem with ripping.
|
|
maveric34
Suspended due to non-functional email address
|
27. October 2005 @ 13:14 |
Link to this message
|
Right, but in order to get a "good burn" you need a good rip. I am not saying this will 100% work, just a suggestion to try. I have over a 100 backup's. have made maybe a half-dozen coasters; total. I personaly use CloneDVD, I like being able to remove content and it seams to burn well for me, but I have used shrink with no problems either. Anyway, give it a shot, what's the worst that can happen, your backup won't play?????
|
|
akyllonen
Member
|
27. October 2005 @ 13:43 |
Link to this message
|
Here my normal method.
ISO Read (Rip to Hard Drive)with DVD Decrypter
Right click the ISO file on the drive and select "Open with Shrink"
Backup to Harddrive save as ISO. (I usually batch encode 2 to 6 at a time)
Then Burn with DVD Decrypter...I never use Nero....
Again what are the errors you get on the "bad" burns? Plus a Nero Log will help....just don't post the serial #...
2.4 Celeron;512k ram; 80gig HD; 60gig HD; Windows XP(SP1).
Sony DRU-710A (BYX4)
DVD Shrink/DVD Decrypter.
TYG02;YUDEN002;MCC blanks.
Favorite Media: Sony 8x+R(MADE IN JAPAN)
Laptop: 1.4 Ghz;256k ram; 40 gig HD;Windows XP
NEC ND-6650A Burner
|
|
slosten
Junior Member
|
27. October 2005 @ 14:03 |
Link to this message
|
It just won't play at all in anything but a PC.
Here is the log :
Burn process failed at 8x(11,080 KB/s).
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 5:33:44 PM
Nero API version: 6.3.1.19
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <SONY DVD RW DRU-710A> Version: BY03 - HA 1 TA 1 - 6.3.1.19
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 4D080H4 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : COMPAQ DVD-ROM GDR8160B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SONY DVD RW DRU-710A atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
COMPAQ DVD-ROM GDR8160B D: CDRom0
SONY DVD RW DRU-710A E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 36700160 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 223MB (228756kB)
Free physical memory: 68MB (70596kB)
Memory in use : 69 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
27.10.2005
NeroAPI
1:04:54 PM #1 Phase 112 File APIProgress.cpp, Line 273
DVD-Video files reallocation started
1:04:54 PM #2 Phase 114 File APIProgress.cpp, Line 273
DVD-Video files reallocation completed (no file modified)
1:04:54 PM #3 Phase 111 File APIProgress.cpp, Line 273
DVD-Video files sorted
1:04:55 PM #4 Text 0 File Reader.cpp, Line 118
Reader running
1:04:55 PM #5 Text 0 File Writer.cpp, Line 124
Writer SONY DVD RW DRU-710A running
1:04:55 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 817
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
1:04:55 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
1:04:55 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
1:04:55 PM #9 Text 0 File Burncd.cpp, Line 3173
Turn on Disc-At-Once, using DVD media
1:04:56 PM #10 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286111 (508:01.36, 4465MB)
1:04:56 PM #11 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO
1:04:56 PM #12 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: SONY DVD RW DRU-710A, Media type: DVD+R
Disc Manufacturer ID: SONY, Media Type ID: D11, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3
1:04:56 PM #13 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
1:04:56 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [SONY DVD RW DRU-710A ]
--------------------------------------------------------------
1:04:56 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [SONY DVD RW DRU-710A ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286112 | lead-out | 1 | 0x00 | 0x41
1:04:58 PM #16 Phase 24 File APIProgress.cpp, Line 273
Caching of files started
1:04:58 PM #17 Text 0 File Burncd.cpp, Line 4183
Cache writing successful.
1:04:58 PM #18 Phase 25 File APIProgress.cpp, Line 273
Caching of files completed
1:04:58 PM #19 Phase 36 File APIProgress.cpp, Line 273
Burn process started at 8x (11,080 KB/s)
1:04:58 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
1:04:58 PM #21 Text 0 File Cdrdrv.cpp, Line 8128
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: SONY....
Media type ID: D11
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 53 4F 4E 59 00 - 00 00 00 44 31 31 00 38 ...SONY....D11.8
23 54 37 14 00 32 6F 00 - 96 6A 17 19 0C 0C 0A 0B #T7..2o..j......
01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................
1:04:58 PM #22 Text 0 File DVDPlusRW.cpp, Line 628
Start write address at LBA 0
DVD high compatibility mode: Yes
1:11:23 PM #23 SCSI -1135 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x00BB0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x1B 0x12 0x20 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00
1:11:23 PM #24 CDR -1135 File Writer.cpp, Line 304
Write error
1:11:23 PM #25 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
1:11:23 PM #26 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
1:11:23 PM #27 Phase 38 File APIProgress.cpp, Line 273
Burn process failed at 8x (11,080 KB/s)
1:11:23 PM #28 Text 0 File AudioCompilationImpl.cpp, Line 828
DRM: DRM burn session terminated.
1:11:23 PM #29 Text 0 File AudioCompilationImpl.cpp, Line 857
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Okay I tried to do it as you said by ripping with Decrypter, saving to HDD with Shrink and then burning with Decrypter and I get this ...
Along with this log ...
This message has been edited since posting. Last time this message was edited on 27. October 2005 @ 15:03
|
AfterDawn Addict
|
27. October 2005 @ 15:12 |
Link to this message
|
Set burn speed at 4x.
Set backup target at 4360:
Open up dvd shrink/Edit/Preferences/Click on dvd-5/scroll till custom/enter 4360 next to custom/click ok and your new target is set.This keeps the burn from reaching the outer edge.Now you will have to change it for dual layer media,but nero6 may have trouble with dual layer backing up.
This log looked like the burn failed towards the end of your backup so that target should help. Your drive recognized the SonyD11 media,firmware update may or may not help,but always good to keep that update site bookmarked for future problems.Slow down that burn speed.
Those sonyD11 are pretty good,but I avoid them because spindles of Yuden000-T02 are on the japanese spindles. SonyD11 are the taiwanese +1x-8x. Look those wrappers over carefully for the japanese discs.
For stand alone compatability:
Definitely try booktyping with your rebadged lite-on, sony dru 710. It just may take care of that issue. Lite-on has a booktyping utility that also works on the sony that are re-badged liteys. Check it out here:
http://www.liteonamericas.com/us/download.htm
Dvd shrink has a box you can try in the backup options/burnsettings/ that says booktype to dvd-rom. Try ticking it.It shouldn't hurt. The plus format is the only format that can be booktyped.
HP a1118x-b/athlon 64-3300+/BenQ 1650 BCDC/LG 8163B/Modded Wii/Epson-R300 and Ty Watershields!!! |
|
akyllonen
Member
|
27. October 2005 @ 19:02 |
Link to this message
|
Looks like you get to ~50% and it errors out at sector 1123328.
Quote:
Last address to be written: 2286111
.
Quote:
Free physical memory: 68MB (70596kB)
Is this Nero log a burn on the fly job? If so I'd add more memory.
Quote:
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Where's our resident Nero log expert? He'll have more luck with this than me! I'd try some other discs if you have them....see if those fail at the same point as well.
2.4 Celeron;512k ram; 80gig HD; 60gig HD; Windows XP(SP1).
Sony DRU-710A (BYX4)
DVD Shrink/DVD Decrypter.
TYG02;YUDEN002;MCC blanks.
Favorite Media: Sony 8x+R(MADE IN JAPAN)
Laptop: 1.4 Ghz;256k ram; 40 gig HD;Windows XP
NEC ND-6650A Burner
|
AfterDawn Addict
6 product reviews
|
27. October 2005 @ 19:07 |
Link to this message
|
Quote:
Nero API version: 6.3.1.19
Update Nero 6. Latest vs is 6.6.0.16
Quote:
Recorder: <SONY DVD RW DRU-710A> Version: BY03
Update your firmware. Yours is BY03 and the latest is BYX4 http://forum.rpc1.org/dl_firmware.php?download_id=1917
I also agree with saugmon about booktyping your DVD+R media to dvd-rom for best compatability with stand alone dvd players. Since your sony is a rebadged lite-on the lite-on booktype utility should do the job. Here's a link to the utility and there is also a link to a usage guide there too. http://club.cdfreaks.com/showthread.php?t=83441
Rig #1 Asus Rampage Formula Mobo, Intel Core2Quad Q9450 CPU @ 3.55ghz, 2gb Corsair DDR2 1066 Dominator Ram @ 5-5-5-15, TR Ultra 120 Extreme w/ Scythe 9 blade 110 cfm 120mm Fan HSF, HIS Radeon 512mb HD3850 IceQ TurboX GPU, Corsair 620HX P/S, CM Stacker 830 Evo Case, Rig #2 Asus P5W DH Deluxe Mobo, Intel C2D E6600 CPU @ 3.6ghz, 2gb Corsair XMS2 DDR2 800 Ram @ 4-4-4-12-2t, Zalman CNPS9500LED HSF, Sapphire Radeon X850XT PE GPU, Corsair 620HX P/S, Cooler Master Mystique Case, Viewsonic 20.1" Widescreen Digital LCD Monitor, Klipsch Promedia Ultra 5.1 THX Desktop Speakers, http://valid.x86-secret.com/show_oc.php?id=348351 http://valid.x86-secret.com/show_oc.php?id=236435 |
|
slosten
Junior Member
|
27. October 2005 @ 21:17 |
Link to this message
|
|
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero API version: 6.6.0.16
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 16b
Recorder: <SONY DVD RW DRU-710A> Version: BYX5 - HA 1 TA 1 - 6.6.0.16
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 4D080H4 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : COMPAQ DVD-ROM GDR8160B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SONY DVD RW DRU-710A atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
COMPAQ DVD-ROM GDR8160B D: CDRom0
SONY DVD RW DRU-710A E: CDRom3
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 36700160 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 223MB (228756kB)
Free physical memory: 63MB (65316kB)
Memory in use : 71 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
27.10.2005
NeroAPI
8:46:56 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
8:46:56 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
8:46:56 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
8:46:57 PM #4 Text 0 File Reader.cpp, Line 127
Reader running
8:46:57 PM #5 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DRU-710A running
8:46:57 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
8:46:57 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
8:46:57 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
8:46:57 PM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
8:46:58 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2232863 (496:11.38, 4361MB)
8:46:58 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO
8:46:58 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: SONY DVD RW DRU-710A, Media type: DVD+R
Disc Manufacturer ID: SONY, Media Type ID: D11, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3
8:46:58 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
8:46:58 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2232864 (2232864) = #2232864/496:11.39
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2232864 blocks [SONY DVD RW DRU-710A]
--------------------------------------------------------------
8:46:58 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [SONY DVD RW DRU-710A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4572905472, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2232864 | lead-out | 1 | 0x41 | 0x00
8:47:00 PM #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
8:47:00 PM #17 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
8:47:00 PM #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
8:47:00 PM #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 4x (5,540 KB/s)
8:47:00 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
8:47:00 PM #21 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: SONY....
Media type ID: D11
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 53 4F 4E 59 00 - 00 00 00 44 31 31 00 38 ...SONY....D11.8
23 54 37 14 00 32 6F 00 - 96 6A 17 19 0C 0C 0A 0B #T7..2o..j......
01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................
8:47:00 PM #22 CDR -1207 File DVDR.cpp, Line 5065
Book Type automatically set to: Current recorder setting
8:47:00 PM #23 Text 0 File DVDPlusRW.cpp, Line 665
Start write address at LBA 0
DVD high compatibility mode: Yes
8:56:16 PM #24 SCSI -1135 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x05C00000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x16 0xA3 0x80 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00
8:56:16 PM #25 CDR -1135 File Writer.cpp, Line 311
Write error
8:56:16 PM #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
8:56:16 PM #27 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
8:56:17 PM #28 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 4x (5,540 KB/s)
8:56:17 PM #29 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
8:56:17 PM #30 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Updated Nero. Even got a newer update then suggested for my drive. Slowed down speed from 8 to 4 and got ANOTHER coaster. This sucks.
I decided to try ANYDVD out...Here is what it said about my DVD...
Summary for drive D: (AnyDVD 5.4.4.1)
Drive (Hardware) Region: 1
Media is a Data DVD.
Booktype: dvd-rom (version 1), Layers: 2 (opposite)
Video DVD (or CD) label: FERNLOTH
Media is CSS protected!
Video Standard: NTSC
Media is locked to region(s): 1!
Found & removed RCE protection!
DVD structure appears to be correct.
Structural copy protection not found.
Autorun not found on Video DVD.
Bad sector protection not found.
Emulating RPC-2 drive with region 1!
This message has been edited since posting. Last time this message was edited on 27. October 2005 @ 21:27
|
AfterDawn Addict
6 product reviews
|
27. October 2005 @ 21:38 |
Link to this message
|
Will it play back on your pc?
Quote:
Memory in use : 71 %
Shutdown some background programs.
Have you defragmented your hdd and removed adware/spyware lately? The media you are useing is usually ok but you might try a small batch of good quality media such as verbatum, taiyo yuden, maxell, fuji (made in japan), or sony (made in japan).
Rig #1 Asus Rampage Formula Mobo, Intel Core2Quad Q9450 CPU @ 3.55ghz, 2gb Corsair DDR2 1066 Dominator Ram @ 5-5-5-15, TR Ultra 120 Extreme w/ Scythe 9 blade 110 cfm 120mm Fan HSF, HIS Radeon 512mb HD3850 IceQ TurboX GPU, Corsair 620HX P/S, CM Stacker 830 Evo Case, Rig #2 Asus P5W DH Deluxe Mobo, Intel C2D E6600 CPU @ 3.6ghz, 2gb Corsair XMS2 DDR2 800 Ram @ 4-4-4-12-2t, Zalman CNPS9500LED HSF, Sapphire Radeon X850XT PE GPU, Corsair 620HX P/S, Cooler Master Mystique Case, Viewsonic 20.1" Widescreen Digital LCD Monitor, Klipsch Promedia Ultra 5.1 THX Desktop Speakers, http://valid.x86-secret.com/show_oc.php?id=348351 http://valid.x86-secret.com/show_oc.php?id=236435 |
|
slosten
Junior Member
|
27. October 2005 @ 22:10 |
Link to this message
|
|
No it doesn't finish burning. The discs go full but there is no info or anything on them.
As for the memory, I have everything closed when it runs. That is what the program seems to take up. At least all the other programs are ones that need to stay running and are SYSTEM programs.
|
AfterDawn Addict
|
27. October 2005 @ 22:22 |
Link to this message
|
Quote:
Recorder: <SONY DVD RW DRU-710A> Version: BYX5
DRU710A is up-to-date with the latest firmware, so this looks good.
Quote:
Physical memory : 223MB (228756kB)
Free physical memory: 63MB (65316kB)
Memory in use : 71 %
This is too low, you really need to upgrade/add more RAM (at least another 256MB or 512MB of RAM) to boost up your CPU. To free up more memory, go to START, RUN and type "msconfig", click on STARTUP and disable/uncheck any running programs at startup that you don't need at this moment. Another way is "ctrl+alt+del" and you need to end the "processes" on any running programs/applications that you need it this time in prior to burning.
Quote:
Media type: DVD+R
Disc Manufacturer ID: SONY, Media Type ID: D11
I don't like this kind of media. I'm not saying Made In Taiwan is bad, but I prefer and highly recommend using only Taiyo Yuden (Yuden media is also the FUJI & SONY DVD+R "Made In Japan" only), Verbatim (MCC003 & MCC004 only) and Maxell (Made In Japan.)
Quote:
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x05C00000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x16 0xA3 0x80 0x00 0x00 0x20
Your Sony burner doesn't like the media you're using. Again, look at above reply about high quality media.
@slosten,
Looks like you need some "book typing" procedures and a few other things to be taken care of in order for you to have a successfully burned and able to play on any of your dvd players. Below are some very useful tools and guides that you might need to make good notes of it, so I highly recommend you save or print out this instructions for future references.
Here http://www.liteonit.com/ODD/English/e_downloads/e_utility.asp is the Lite-On Book Type Utility (version 1.3.5) -- this may help you to book type all your DVD+R/DVD+R DL/DVD+RW media into DVD-ROM, so it'll be more easier on any of your stand alone dvd players. And here http://www.k-probe.com/kprobe-bitsetting-booktype.php is the "instructions" to follow.
((NOTE: in prior to ?decrypt or rip? the original movie, take a few seconds to check the few following ?settings? on DVD Decrypter.))
** open up DVD Decrypter, go to Tools, and Settings
** at General ?Removal Method? arrow down to ?Aggressive?
** at I/O check ?Ignore Read Errors?
** at CSS check ?Brute Force ŕ I/O key exchange, On Failure: use key from another file [YES]
** at ISO Write Mode, check ?Enable BURN-Proof
** at ?ISO Read Mode? and ?File Mode? check/tick on all of the Remove, Ignore, Patch and Create MDS file
http://www.digitalfaq.com/media/dvdmedia.htm (the official best and or high quality media page, all about top notch media & crap media)
Here http://www.k-probe.com/bitsetting-booktype-faq.php is the Book Type instructions via DVD Decrypter. However, you "don't" need to use the (Chang for: Next Write), instead use only (Change for: DVD+R/DVD+R DL Media) or (Change for: DVD+R/DVD+R DL Media - EEPROM!). I've tested both and it successfully worked, meaning it did changed my DVD+R/DVD+R DL into DVD-ROM flawlessly.
**Here is how to "Book Type or Bitsettings" using both Nero Burning Rom**
01) open up Nero StartSmart, then click on Nero Burning Rom
02) EXIT out the "New Compilation" when it pops up
03) click on "Chooses A Recorder" (it's a small burner icon next to (I) and the arrow down)
04) click on "Options", then on "Book Type Settings," set to "Automatic" and click "OK" - that's it... easy as smoking. Now every burning using a DVD+R/DVD+R DL/DVD+RW disc your Nero will automatically change the booktype into a DVD-ROM format.
((Here's how to "Book Type or Bitsettings" using Nero Express))
01) open up Nero StartSmart, then Nero Express
02) now click on "Copy Entire Disc"
03) click on "Options", then on "Book Type Settings", set to "Automatic" and click "OK", then "Exit" out. That's it... easy as sipping on some Corona. Again, now every time when you burn, Nero will automatically change your DVD+R/DVD+R DL/DVD+RW into a DVD-ROM in prior to the actual burning process.
Basically, you only need to set the "book type setting" on Nero once. So, if you book type it with Nero Burning Rom already then you don't need to do it again on Nero Express or vice versa.
**NOTE: I highly recommend using authentic Taiyo Yuden, Verbatim, Maxell (Made In Japan) media only, when it comes to dvd burning.
Enjoyed it.... and happy burning..!!
|
|
slosten
Junior Member
|
28. October 2005 @ 11:26 |
Link to this message
|
Well I was finally able to backup my Fear and Loathing in Las Vegas. However, I did it two different ways. First I tried to do the DVD Decrypter to the DVD Shrink ISO then back to Decrypter and I expierienced alot of pixelation. Then I went with ANYDVD and Shrink to burn and have gone halfway through the movie with no problems. Could this be my discs (Sony DVD+R's from Taiwan) or the burn process I used?
Also on the next movie I am trying to backup, Donnie Brasco, I see this...
Can I remove one of those groups of English or will it affect my sound in a certain portion of the movie?
This message has been edited since posting. Last time this message was edited on 28. October 2005 @ 11:45
|
AfterDawn Addict
|
28. October 2005 @ 12:33 |
Link to this message
|
I only tick AC3 5.1CH English only. I untick the rest and have no audio trouble of any kind.
I haven't done that title,but I see there are 2 separate AC3 5.1CH English sound streams. I'd definitely untick both AC2 streams.
If you re-author,Keep the top, #2 AC3 5.1 channel and untick the #6 AC3 5.1.
Entire disc,then you may need both of them.
This is where RW media would come in handy,then you can try it both ways and listen to the difference.
Quote:
Then I went with AnyDVD and Shrink to burn
Did you autoburn with Nero?
HP a1118x-b/athlon 64-3300+/BenQ 1650 BCDC/LG 8163B/Modded Wii/Epson-R300 and Ty Watershields!!!
|
|
slosten
Junior Member
|
28. October 2005 @ 12:50 |
Link to this message
|
Yeah I think it uses Nero. I like having the complete DVD so I will just leave it as is.
|
|
Advertisement
|
|
|
|
akyllonen
Member
|
28. October 2005 @ 17:24 |
Link to this message
|
Quote:
Can I remove one of those groups of English or will it affect my sound in a certain portion of the movie?
You can preview each audio stream by right clicking the video preview box in the lower left of Shrink (while previewing the movie) and choose each one to see if it is needed. Most likely the last 2 are Director's Commentaries....
As for your pixellation...could be standalone compatibility...or too much compression....my OZ discs some are compressed near 50% and glitch out like crazy on one of my players, but play fine on the others.
2.4 Celeron;512k ram; 80gig HD; 60gig HD; Windows XP(SP1).
Sony DRU-710A (BYX4)
DVD Shrink/DVD Decrypter.
TYG02;YUDEN002;MCC blanks.
Favorite Media: Sony 8x+R(MADE IN JAPAN)
Laptop: 1.4 Ghz;256k ram; 40 gig HD;Windows XP
NEC ND-6650A Burner
|
|
