|
|
|
DVD Shrink Read Error
|
|
|
tito911
Newbie
|
30. March 2006 @ 14:19 |
Link to this message
|
|
I've used AnyDVD on Spiderman and am attempting to use DVD Shrink to burn a backup DVD. I get through the encoding and it goes to burn the DVD then gives me the following error:
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 3/11/2006 5:40:13 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 12:35:32 PM
Nero API version: 6.6.0.18
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 18f
Recorder: <SONY DVD RW DRU-820A> Version: 1.0b - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800JB-00JJC0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SONY DVD RW DRU-820A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SONY CD-RW CRX140E atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
SONY DVD RW DRU-820A D: CDRom0
SONY CD-RW CRX140E E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 24117248 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 127MB (130352kB)
Free physical memory: 17MB (18116kB)
Memory in use : 86 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
29.3.2006
NeroAPI
9:43:07 AM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
9:43:07 AM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
9:43:07 AM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
9:43:09 AM #4 Text 0 File Reader.cpp, Line 127
Reader running
9:43:09 AM #5 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DRU-820A running
9:43:09 AM #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
9:43:09 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
9:43:09 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
9:43:09 AM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
9:43:10 AM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2055711 (456:49.36, 4015MB)
9:43:10 AM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO
9:43:10 AM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: SONY DVD RW DRU-820A, Media type: DVD-R
Disc Manufacturer: RITEKF - 1
Disc Application Code: 64, Disc Physical Code: 193
9:43:10 AM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
9:43:10 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2055712 (2055712) = #2055712/456:49.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2055712 blocks [SONY DVD RW DRU-820A]
--------------------------------------------------------------
9:43:10 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [SONY DVD RW DRU-820A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4210098176, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2055712 | lead-out | 1 | 0x41 | 0x00
9:43:17 AM #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
9:43:17 AM #17 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
9:43:17 AM #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
9:43:17 AM #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 2x (2,770 KB/s)
9:43:17 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
9:43:17 AM #21 Text 0 File DVDR.cpp, Line 2596
Recording mode: Sequential Recording Mode
9:43:17 AM #22 Text 0 File Mmc.cpp, Line 21806
Set BUFE: Power-Burn -> ON
9:43:17 AM #23 Text 0 File DVDR.cpp, Line 2751
Start write address at LBA 0
DVD high compatibility mode: Yes
9:43:17 AM #24 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
9:43:40 AM #25 SCSI -1135 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x00CB0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x01 0x40 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x98 0x00 0x0C 0x00
9:43:40 AM #26 CDR -1135 File Writer.cpp, Line 311
Write error
9:43:40 AM #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
9:43:40 AM #28 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
9:43:41 AM #29 Text 0 File DVDR.cpp, Line 2994
EndDAO: Last written address was 319
9:43:41 AM #30 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 2x (2,770 KB/s)
9:43:41 AM #31 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
9:43:41 AM #32 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\CDR4_2K.SYS': Ver=2.5 (093), size=52624 bytes, created 5/26/2005 7:19:52 PM
File 'Drivers\CDRALW2K.SYS': Ver=7.5.0.47 , size=24960 bytes, created 3/8/2005 8:08:42 PM
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 3/11/2006 5:40:13 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 2/1/2005 1:03:00 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Could this be the crappy media? Also, my DVD burner is a Sony DVD-RW DRU-820A. I've downloaded the latest firmware. Any thoughts? Thanks.
tito
This message has been edited since posting. Last time this message was edited on 30. March 2006 @ 18:54
|
|
Advertisement
|
|
|
|
AfterDawn Addict
1 product review
|
30. March 2006 @ 14:37 |
Link to this message
|
I am looking through the rest of the log. The first thing though, your memory is very, very low, don't have even the minimum recommended for burning DVDs(500MB):
Quote:
Physical memory : 127MB (130352kB)
Free physical memory: 17MB (18116kB)
127MB is enough for your OS to run.
Quote:
File 'Drivers\CDR4_2K.SYS': Ver=2.5 (093), size=52624 bytes, created 5/26/2005 7:19:52 PM
File 'Drivers\CDRALW2K.SYS': Ver=7.5.0.47 , size=24960 bytes, created 3/8/2005 8:08:42 PM
You have Roxio installed in your computer. Some people repeorted conflict between Nero and Roxio. You can download Roxio Zapper and remove Roxio.
The media you are using is not the best, but not the worse either.You could try different ones, but without enough memory, the best discs in the world will not help.
Once you get more RAM memory and try burning again, turn this option off:
Quote:
DVD high compatibility mode: Yes
Here you can get Roxio Zapper:
http://www.softpedia.com/get/Tweak/Uninstallers/Roxio-Zap.shtml
 Piss me off, and I Will ignore You!This message has been edited since posting. Last time this message was edited on 30. March 2006 @ 14:47
|
Senior Member
|
30. March 2006 @ 15:52 |
Link to this message
|
|
I would also suggest getting a different brand of media. BUt that's really just my opinion, I don't like Ritek.
But you really need to get some more ram, that 128 is nowhere near enough for DVD burning.
|
|
tito911
Newbie
|
30. March 2006 @ 16:00 |
Link to this message
|
|
Thanks for the replies. I'm laughing at myself because I recently upgraded to XP and I had to take out my add-on memory because it was causing a conflict and my XP wouldn't install. Appreciate the tips - I'll throw in more memory and try this again as well as getting rid of Roxio.
|
|
AddisonII
Newbie
|
30. March 2006 @ 16:30 |
Link to this message
|
|
Just tip of caution: you might want to remove serial number, it begins with 1A
|
AfterDawn Addict
|
30. March 2006 @ 16:37 |
Link to this message
|
Quote:
Just tip of caution: you might want to remove serial number, it begins with 1A
Good job AddisonII !! Do this before your serial is stolen
As far as the problems go....
Quote:
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Means the burner is not recognizing the media,
I would recommend updating your firmware.
But with only 17 megs of memory free,
I dont think your be able to complete until you
add another stick of memory.
http://forum.rpc1.org/dl_all.php
Cheers!
Possunt Quia Posse Videntur. This message has been edited since posting. Last time this message was edited on 30. March 2006 @ 16:40
|
|
tito911
Newbie
|
30. March 2006 @ 19:01 |
Link to this message
|
AddisonII - Thanks!!!!
Jizmak:
Quote:
Means the burner is not recognizing the media,
I would recommend updating your firmware.
I had already updated my firmware so I'm guessing it is the memory or the media . . . or more likely both!!!
|
|
tito911
Newbie
|
8. April 2006 @ 15:04 |
Link to this message
|
Alright guys (and gals) I'm back and can't say I'm much farther along. Got my memory in and am using Nero 7 Ultra Edition. I get the Nero Burn ROM going and the burn begins but then fails and says write error and the next line says illegal disc. I switched my media to Verbatim. Is it still the media that the drive doesn't like? The following is the log:
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 4/8/2006 6:40:43 PM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 7.0.8.2
Internal Version: 7, 0, 8, 2
Recorder: <SONY DVD RW DRU-820A> Version: 1.0b - HA 1 TA 0 - 7.0.8.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <SONY DVD RW DRU-820A >Version: 1.0b - HA 1 TA 0 - 7.0.8.2
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800JB-00JJC0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SONY DVD RW DRU-820A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SONY CD-RW CRX140E atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
SONY DVD RW DRU-820A D: CDRom0
SONY CD-RW CRX140E E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523568kB)
Free physical memory: 205MB (210260kB)
Memory in use : 59 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
8.4.2006
UDF/ISO compilation
6:54:00 PM #1 Phase 112 File dlgbrnst.cpp, Line 1730
DVD-Video files reallocation started
6:54:00 PM #2 Phase 114 File dlgbrnst.cpp, Line 1730
DVD-Video files reallocation completed (no file modified)
6:54:00 PM #3 Text 0 File Isodoc.cpp, Line 6423
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
6:54:00 PM #4 Phase 111 File dlgbrnst.cpp, Line 1730
DVD-Video files sorted
6:54:01 PM #5 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 72704KB of Memory
6:54:01 PM #6 Text 0 File Reader.cpp, Line 124
Reader running
6:54:01 PM #7 Text 0 File Writer.cpp, Line 113
Writer D: SONY DVD RW DRU-820A running
6:54:01 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
6:54:01 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
6:54:01 PM #10 Text 0 File Burncd.cpp, Line 3353
Turn on Disc-At-Once, using DVD media
6:54:01 PM #11 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1748719 (388:36.19, 3415MB)
6:54:01 PM #12 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO
6:54:01 PM #13 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: SONY DVD RW DRU-820A, Media type: DVD+R
Disc Manufacturer ID: MCC, Media Type ID: 004, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7
6:54:01 PM #14 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================
6:54:01 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1748720 (1748720) = #1748720/388:36.20
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1748720 blocks [D: SONY DVD RW DRU-820A]
--------------------------------------------------------------
6:54:01 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [D: SONY DVD RW DRU-820A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3581378560, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1748720 | lead-out | 1 | 0x41 | 0x00
6:54:01 PM #17 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
6:54:01 PM #18 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
6:54:01 PM #19 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started
6:54:01 PM #20 Text 0 File Burncd.cpp, Line 4187
Cache writing successful.
6:54:01 PM #21 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed
6:54:01 PM #22 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 4x (5,540 KB/s)
6:54:01 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
6:54:01 PM #24 Text 0 File Cdrdrv.cpp, Line 8661
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: MCC.....
Media type ID: 004
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 4D 43 43 00 00 - 00 00 00 30 30 34 00 38 ...MCC.....004.8
23 54 37 12 02 54 6C 02 - 92 5F 15 15 0B 0B 08 08 #T7..Tl.._......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
6:54:02 PM #25 Text 0 File DVDR.cpp, Line 6514
Drive: SONY DVD RW DRU-820A
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0
6:54:02 PM #26 CDR -1211 File DVDR.cpp, Line 5640
Book Type set to: DVD-ROM
6:54:02 PM #27 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes
6:54:22 PM #28 SPTI -1135 File SCSIPassThrough.cpp, Line 290
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 01 A0 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 98 00 0C
Buffer x041a0000: Len x10000
0x00 00 01 BA 44 00 1D 2D D4 B5 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 36 40 B3 64 00 7F 72 CF 60
0x52 00 29 24 99 C1 90 00 6C F0 01 BD C4 1C 36 E3
6:54:22 PM #29 CDR -1135 File Writer.cpp, Line 302
Write error
D: SONY DVD RW DRU-820A
6:54:22 PM #30 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
6:54:22 PM #31 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
6:54:22 PM #32 SPTI -1046 File SCSIPassThrough.cpp, Line 290
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x5B 01 01 00 00 01 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05
6:54:22 PM #33 SPTI -1046 File SCSIPassThrough.cpp, Line 290
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x5B 01 05 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05
6:54:22 PM #34 Phase 127 File dlgbrnst.cpp, Line 1730
Generating DVD high compatibility borders
6:54:23 PM #35 Text 0 File DVDR.cpp, Line 6514
Drive: SONY DVD RW DRU-820A
Book Type request [gen]: DVD+R, write to EEPROM
Changing the Book Type was finished successfully, return code 0
6:54:23 PM #36 CDR -1046 File WriterStatus.cpp, Line 167
Illegal disc
D: SONY DVD RW DRU-820A
6:54:23 PM #37 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
6:54:23 PM #38 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 4/8/2006 6:40:43 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 2/1/2005 2:03:00 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Car.Mike
AfterDawn Addict
|
8. April 2006 @ 17:21 |
Link to this message
|
tito911
Below are the errors w/ Nero 7
1. 6:54:22 PM #28 SPTI -1135 File SCSIPassThrough.cpp, Line 290
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
This is a write error by the Nero code ( 1135)
2. 6:54:22 PM #32 SPTI -1046 File SCSIPassThrough.cpp, Line 290
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
This error is an illegal disk (1046)
********************************
This info from the Sony site: Approved Media
DVD+R
Sony Corporation -Disc labeled for use at 8x and 16x speed
Taiyo Yuden Co., Ltd. -Disc labeled for use at 8x speed
Verbatim/Mitsubishi Chemical Co., Ltd.- Disc labeled for use at 8x speed
Hitachi Maxell, Ltd -Disc labeled for use at 4x speed
Richo Co.,Ltd.-Disc labeled for use at 4x and 8x speed
What that is telling me you need to use the 8X (+)Verbatim disks as they have not written firmware for the 16X. This is why you are getting those error codes. I have no idea where you will find any 8X Verbatim as most of what I have seen is 16X
Now if you can find the 16x (-) Verbatim they are OK to use
Here is the site: http://sony.storagesupport.com/dvdrw/820mediainfo_gb_na060227.htm
This message has been edited since posting. Last time this message was edited on 8. April 2006 @ 17:25
|
|
tito911
Newbie
|
8. April 2006 @ 18:06 |
Link to this message
|
|
Car.Mike:
Thanks for the reply. I can't believe how picky it is with media. Is that because the drive is a fairly new version of Sony you think? Guess I'm off to track down some other media. . . sigh.
I really do appreciate your help in sifting through the info and pointing me in the right direction towards a solution. AD rocks!
|
|
Car.Mike
AfterDawn Addict
|
8. April 2006 @ 18:12 |
Link to this message
|
|
tito911 ,
Make sure that you look at the Sony site and print out the info you will need. I also would have thought if 16X(-) was OK then 16X(+) would also be OK.
Your best bet since the speeds of the (+) media is low is to look for Sony blank media or go w/ the (-) blank media
This message has been edited since posting. Last time this message was edited on 8. April 2006 @ 18:18
|
|
tito911
Newbie
|
9. April 2006 @ 06:27 |
Link to this message
|
|
Car.Mike,
Thanks again for your help. I will post back after I attempt with different media I pick up later today. Keep your fingers crossed!
I saw back a couple posts that you showed a Nero error - is that related to the media as well or is that a separate issue in Nero that I need to investigate?
This message has been edited since posting. Last time this message was edited on 9. April 2006 @ 06:30
|
|
Car.Mike
AfterDawn Addict
|
9. April 2006 @ 08:37 |
Link to this message
|
|
tito911,
Media
|
|
tito911
Newbie
|
9. April 2006 @ 11:26 |
Link to this message
|
Unbelieveable!!!!! I still get a failure to burn. Here's the log:
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 4/8/2006 6:40:43 PM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero API version: 7.0.8.2
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\Nero - Burning Rom
Internal Version: 7, 0, 8, 2
Recorder: <SONY DVD RW DRU-820A> Version: 1.0b - HA 1 TA 0 - 7.0.8.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800JB-00JJC0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SONY DVD RW DRU-820A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SONY CD-RW CRX140E atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
SONY DVD RW DRU-820A D: CDRom0
SONY CD-RW CRX140E E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523568kB)
Free physical memory: 196MB (200976kB)
Memory in use : 61 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
9.4.2006
NeroAPI
3:18:57 PM #1 Phase 112 File APIProgress.cpp, Line 278
DVD-Video files reallocation started
3:18:57 PM #2 Phase 114 File APIProgress.cpp, Line 278
DVD-Video files reallocation completed (no file modified)
3:18:57 PM #3 Phase 111 File APIProgress.cpp, Line 278
DVD-Video files sorted
3:18:57 PM #4 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 72704KB of Memory
3:18:57 PM #5 Text 0 File Reader.cpp, Line 124
Reader running
3:18:57 PM #6 Text 0 File Writer.cpp, Line 113
Writer D: SONY DVD RW DRU-820A running
3:18:57 PM #7 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
3:18:57 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
3:18:57 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
3:18:57 PM #10 Text 0 File Burncd.cpp, Line 3353
Turn on Disc-At-Once, using DVD media
3:18:57 PM #11 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2067871 (459:31.46, 4038MB)
3:18:57 PM #12 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO
3:18:57 PM #13 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: SONY DVD RW DRU-820A, Media type: DVD-R
Disc Manufacturer: SONY16 - D1
Disc Application Code: 64, Disc Physical Code: 193
3:18:57 PM #14 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================
3:18:57 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2067872 (2067872) = #2067872/459:31.47
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2067872 blocks [D: SONY DVD RW DRU-820A]
--------------------------------------------------------------
3:18:57 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [D: SONY DVD RW DRU-820A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4235001856, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2067872 | lead-out | 1 | 0x41 | 0x00
3:18:57 PM #17 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
3:18:57 PM #18 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
3:18:57 PM #19 Phase 24 File APIProgress.cpp, Line 278
Caching of files started
3:18:57 PM #20 Text 0 File Burncd.cpp, Line 4187
Cache writing successful.
3:18:57 PM #21 Phase 25 File APIProgress.cpp, Line 278
Caching of files completed
3:18:57 PM #22 Phase 36 File APIProgress.cpp, Line 278
Burn process started at 4x (5,540 KB/s)
3:18:57 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
3:18:57 PM #24 Text 0 File DVDR.cpp, Line 2760
Recording mode: Sequential Recording Mode
3:18:57 PM #25 Text 0 File DVDR.cpp, Line 2916
Start write address at LBA 0
DVD high compatibility mode: Yes
3:18:57 PM #26 Text 0 File Cdrdrv.cpp, Line 8661
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
3:19:20 PM #27 SPTI -1135 File SCSIPassThrough.cpp, Line 290
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 02 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 98 00 0C
Buffer x00bb0000: Len x10000
0x00 00 01 BA 44 00 1F 5B D4 81 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 73 40 3A 92 C6 87 B1 86 01
0xBE 15 6A 38 C4 75 00 F7 0C 31 DF 25 CE 12 3E 8E
3:19:20 PM #28 CDR -1135 File Writer.cpp, Line 302
Write error
D: SONY DVD RW DRU-820A
3:19:20 PM #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
3:19:20 PM #30 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
3:19:20 PM #31 Text 0 File DVDR.cpp, Line 3156
EndDAO: Last written address was 511
3:19:20 PM #32 Phase 38 File APIProgress.cpp, Line 278
Burn process failed at 4x (5,540 KB/s)
3:19:20 PM #33 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
3:19:20 PM #34 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 4/8/2006 6:40:43 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 2/1/2005 2:03:00 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
-----------------------
Specifically, does the following mean anything special?
Recorder: <SONY DVD RW DRU-820A> Version: 1.0b - HA 1 TA 0 - 7.0.8.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
Thanks again for all y'alls help so far!!
|
|
Car.Mike
AfterDawn Addict
|
9. April 2006 @ 17:21 |
Link to this message
|
|
tito911
3:19:20 PM #27 SPTI -1135 File SCSIPassThrough.cpp, Line 290
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Well this a first for me. A Sony burner that does not like Sony blank media.
Let's see if anyone else has a better isea
|
|
daman1
Senior Member
|
9. April 2006 @ 17:27 |
Link to this message
|
I backed both my SM with shrink and Nero Ver. 6.6.0.12,no problem :)
|
AfterDawn Addict
1 product review
|
9. April 2006 @ 17:45 |
Link to this message
|
Quote:
Start write address at LBA 0
DVD high compatibility mode: Yes
It might not be your case, but it won't hurt either. I had a couple of burns fail when I used that feature.
Also, save the project to HDD drive first and then open NBR and do the burn manually. The only time my burns failed it was when I had the DVD high compatibility on and when autoburning Shrink/Nero.
Piss me off, and I Will ignore You!
|
|
tito911
Newbie
|
9. April 2006 @ 18:13 |
Link to this message
|
Thanks for the responses everyone. I have the movie saved to my hard drive and am burning it manually with Nero. It isn't just this movie either. I've tried Domino, Fight Club (which I got read failure errors with), A Sound of Thunder. They all fail. Anybody think it could be the actual drive? Only 2 weeks old. . . Any other ideas? Try another type of media perhaps?
|
|
Car.Mike
AfterDawn Addict
|
9. April 2006 @ 18:38 |
Link to this message
|
|
tito911,
The laser could be off on the burner. Heck it could be anything. If it is 2 wks old the burner has to be under warranty but that is supposition
|
|
Advertisement
|
|
|
|
tito911
Newbie
|
28. April 2006 @ 16:41 |
Link to this message
|
Wow, was that a hassle. Well, I finally got the issue resolved. It was the sony burner that was a dud. Took it back and then got a benQ. Dropped it in, put in a DVD with AnyDVD and copied with no trouble using CloveDVD. Amazing. It seemed almost too easy after going through the mess with the other burner. Anyway, just wanted to close out the thread and give a big thanks to all those that dropped in and gave some help. Happy burning all!!!
|
|
