|
|
|
DVD SHRINK AND NERO PROBLEMS
|
|
|
Sara82
Junior Member
|
3. September 2006 @ 08:41 |
Link to this message
|
Hi I hope you can help I have been looking for answers all day. I usually use nerovision to burn mpeg files to dvd but today when I tried before it even began to burn, it said that it could not create disc structure. So then I tried using DVD Shrink I got the trf error and then read that if you uninstall Nero and reinstall an earlier version DVD Shrink should work I tried that but now all I get is burn failed.
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero API version: 6.6.0.1
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD2500JD-00HBB0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD RW DVR-108 atapi Port 2 ID 0 DMA: On
CdRomPeripheral : IDE DVD-ROM 16X atapi Port 2 ID 1 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a xmasscsi Port 4 ID 0 DMA: Off
=== CDRom-Device-Map ===
PIONEER DVD RW DVR-108 D: CDRom0
IDE DVD-ROM 16X E: CDRom1
AXV CD/DVD-ROM F: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 66060288 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 447MB (457964kB)
Free physical memory: 129MB (133028kB)
Memory in use : 70 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
3.9.2006
NeroAPI
17:32:40 #1 Text 0 File NeroBurnCommon.cpp, Line 66
Message file not found
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 04/08/2004 13:00:00
File 'Drivers\CDRALW2K.SYS': Ver=7.0.1.39 , size=24576 bytes, created 03/04/2004 13:32:20
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 05/08/2006 19:58:36 (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
I hope somebody has some ideas, it seems odd that it should suddenly stop working as nothing has changed on my computer
thanks for your time
p.s I dont know if this helps but I have been making a lot of audio cd's recently could that have somehow messed it up and I just tried to make one and it got to 100% and said unknown burn phase
This message has been edited since posting. Last time this message was edited on 3. September 2006 @ 08:58
|
|
Advertisement
|
 |
|
|
Moderator
|
3. September 2006 @ 10:08 |
Link to this message
|
|
|
Sara82
Junior Member
|
3. September 2006 @ 10:33 |
Link to this message
|
Thanks very much for replying I will try what you said and get back to you. I have been using datawrite red 8x DVD+R and they have been working for ages now. I also tried imation 8x DVD+R.
thanks again
|
Moderator
|
3. September 2006 @ 10:43 |
Link to this message
|
|
Datawrite uses some good manufacturers like MCC. But also uses Prodisc which may be the problem. They're ok.
Imation on the other hand - doesn't use very good manufacturers.
So let's see how the above goes. Fails -just post the new log and we'll go from there.
And you're welcome :)
|
|
Sara82
Junior Member
|
3. September 2006 @ 11:08 |
Link to this message
|
Hi, Thanks for replying again, I did as you said though I haven't unistalled roxio yet, as I am not quite sure how to. I tried to burn a disc with DVD Shrink but got a calibration error which is different to what was happening before
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero API version: 6.6.0.18
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 18e
Recorder: <PIONEER DVD RW DVR-108> Version: 1.18 - HA 2 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 2
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD2500JD-00HBB0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD RW DVR-108 atapi Port 2 ID 0 DMA: On
CdRomPeripheral : IDE DVD-ROM 16X atapi Port 2 ID 1 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a xmasscsi Port 4 ID 0 DMA: Off
=== CDRom-Device-Map ===
PIONEER DVD RW DVR-108 D: CDRom0
IDE DVD-ROM 16X E: CDRom1
AXV CD/DVD-ROM F: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 66060288 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 447MB (457964kB)
Free physical memory: 130MB (133360kB)
Memory in use : 70 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
3.9.2006
NeroAPI
20:04:20 #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
20:04:20 #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
20:04:20 #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
20:04:20 #4 Text 0 File Reader.cpp, Line 127
Reader running
20:04:20 #5 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
20:04:20 #6 Text 0 File Writer.cpp, Line 122
Writer PIONEER DVD RW DVR-108 running
20:04:20 #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
20:04:20 #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
20:04:20 #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
20:04:20 #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2014271 (447:36.71, 3934MB)
20:04:20 #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO
20:04:20 #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: PIONEER DVD RW DVR-108, Media type: DVD+R
Disc Manufacturer ID: OPTODISC, Media Type ID: OR8, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3
20:04:20 #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
20:04:20 #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2014272 (2014272) = #2014272/447:36.72
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2014272 blocks [PIONEER DVD RW DVR-108]
--------------------------------------------------------------
20:04:20 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [PIONEER DVD RW DVR-108] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4125229056, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2014272 | lead-out | 1 | 0x41 | 0x00
20:04:20 #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
20:04:20 #17 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
20:04:20 #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
20:04:20 #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 8x (11,080 KB/s)
20:04:21 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
20:04:21 #21 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: OPTODISC
Media type ID: OR8
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 4F 50 54 4F 44 - 49 53 43 4F 52 38 00 38 ...OPTODISCOR8.8
23 54 37 09 02 64 6A 02 - C8 63 18 18 0A 0A 0E 0E #T7..dj..c......
01 1B 1D 0B 0B 11 13 01 - 00 00 00 00 00 00 00 00 ................
20:04:21 #22 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes
20:04:22 #23 Text 0 File Cdrdrv.cpp, Line 1288
20:04:22.406 - PIONEER DVD RW DVR-108\H2 T0 : Queue again later
20:04:29 #24 SCSI -1106 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x00CD0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x03 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x73 0x03
20:04:29 #25 CDR -1106 File Writer.cpp, Line 311
Power calibration error
20:04:29 #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
20:04:29 #27 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
20:04:33 #28 SCSI -1106 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 2, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x73 0x03
20:04:40 #29 SCSI -1122 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0AAA5000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x57
Sense Qual: 0x00
CDB Data: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x57 0x00
20:04:40 #30 Phase 127 File APIProgress.cpp, Line 276
Generating DVD high compatibility borders
20:04:40 #31 CDR -1122 File WriterStatus.cpp, Line 167
Unable to recover TOC
20:04:40 #32 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
20:04:40 #33 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 8x (11,080 KB/s)
20:04:40 #34 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
20:04:40 #35 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 04/08/2004 13:00:00
File 'Drivers\CDRALW2K.SYS': Ver=7.0.1.39 , size=24576 bytes, created 03/04/2004 13:32:20
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 05/08/2006 19:58:36 (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Thanks for all your help, because I am completely clueless
Sara
p.s. I only have a roxio shared folder and two files in windows system 32 CDDBCONTROLROXIO.DLL AND CDDBUIROXIO.DLL
This message has been edited since posting. Last time this message was edited on 3. September 2006 @ 11:12
|
Moderator
|
3. September 2006 @ 11:33 |
Link to this message
|
Ok to uninstall Roxio - just go to add/remove programs and look for Easy CD creator - that may be the Roxio program you have installed. Uninstall from here then download and run the zap tool to remove any traces.
Quote:
Recorder: <PIONEER DVD RW DVR-108> Version: 1.18
Is this a Medion pc or did you buy this the Pioneer?
May need a firmware update for the drive.
Quote:
Disc Manufacturer ID: OPTODISC,
Those Imations are made by Optodisc - not the best and may be the cause of your power calibration error.
Have any more of the Datawrites?
Quote:
Burn process failed at 8x
For these let's try 4x and see how that goes.
|
|
Sara82
Junior Member
|
3. September 2006 @ 11:58 |
Link to this message
|
Hi, I dont know where the roxio has come from because I dont have easycd installed. I used the datawrite, not the imation when I tried the DVD Shrink. I will try the burn at 4x. The pioneer came ready installed on the computer
advent
t-series
intel (r)
pentium(r)4cpu 3.40ghz
3.40ghz, 448mb of ram
I think there maybe a medion capture card installed.
I have two exclaimation marks in device manager, one is on nvidia wdm a/v crossbar and one is on nvidia wdm video capture (universal). I dont know if that helps
thanks again for all the help
|
|
Sara82
Junior Member
|
3. September 2006 @ 12:08 |
Link to this message
|
It failed again when I tried it at 4x using datawrite
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero API version: 6.6.0.18
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 18e
Recorder: <PIONEER DVD RW DVR-108> Version: 1.18 - HA 2 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 2
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD2500JD-00HBB0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD RW DVR-108 atapi Port 2 ID 0 DMA: On
CdRomPeripheral : IDE DVD-ROM 16X atapi Port 2 ID 1 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a xmasscsi Port 4 ID 0 DMA: Off
=== CDRom-Device-Map ===
PIONEER DVD RW DVR-108 D: CDRom0
IDE DVD-ROM 16X E: CDRom1
AXV CD/DVD-ROM F: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 66060288 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 447MB (457964kB)
Free physical memory: 129MB (132872kB)
Memory in use : 70 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
3.9.2006
NeroAPI
21:03:46 #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
21:03:46 #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
21:03:46 #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
21:03:46 #4 Text 0 File Reader.cpp, Line 127
Reader running
21:03:46 #5 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
21:03:46 #6 Text 0 File Writer.cpp, Line 122
Writer PIONEER DVD RW DVR-108 running
21:03:46 #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
21:03:46 #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
21:03:46 #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
21:03:47 #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2014271 (447:36.71, 3934MB)
21:03:47 #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO
21:03:47 #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: PIONEER DVD RW DVR-108, Media type: DVD+R
Disc Manufacturer ID: OPTODISC, Media Type ID: OR8, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3
21:03:47 #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
21:03:47 #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2014272 (2014272) = #2014272/447:36.72
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2014272 blocks [PIONEER DVD RW DVR-108]
--------------------------------------------------------------
21:03:47 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [PIONEER DVD RW DVR-108] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4125229056, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2014272 | lead-out | 1 | 0x41 | 0x00
21:03:47 #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
21:03:47 #17 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
21:03:47 #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
21:03:47 #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 4x (5,540 KB/s)
21:03:47 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
21:03:47 #21 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: OPTODISC
Media type ID: OR8
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 4F 50 54 4F 44 - 49 53 43 4F 52 38 00 38 ...OPTODISCOR8.8
23 54 37 09 02 64 6A 02 - C8 63 18 18 0A 0A 0E 0E #T7..dj..c......
01 1B 1D 0B 0B 11 13 01 - 00 00 00 00 00 00 00 00 ................
21:03:47 #22 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes
21:03:48 #23 Text 0 File Cdrdrv.cpp, Line 1288
21:03:48.906 - PIONEER DVD RW DVR-108\H2 T0 : Queue again later
21:03:55 #24 SCSI -1106 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0ACA0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x03 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x73 0x03
21:03:55 #25 CDR -1106 File Writer.cpp, Line 311
Power calibration error
21:03:55 #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
21:03:55 #27 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
21:06:10 #28 Phase 127 File APIProgress.cpp, Line 276
Generating DVD high compatibility borders
21:06:10 #29 Phase 129 File APIProgress.cpp, Line 276
Generating DVD borders completed successfully
21:06:10 #30 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 4x (5,540 KB/s)
21:06:10 #31 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
21:06:10 #32 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 04/08/2004 13:00:00
File 'Drivers\CDRALW2K.SYS': Ver=7.0.1.39 , size=24576 bytes, created 03/04/2004 13:32:20
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 05/08/2006 19:58:36 (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
Senior Member
|
3. September 2006 @ 12:44 |
Link to this message
|
|
hello Sara82,
It just seems like ur Pioneer burner does not like those disks u r using.
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Try using this kind of media, u cant go wrong with any of these
Verbatims(Made in taiwan)
Taiyo Yuden(Online)
Sony(MIJ)
Maxell(MIJ)
Fuji(MIJ)
MIJ=Made in Japan
"When I look at the smiles on all the childrens faces, I just know theyre about to jab me with something."- Homer Simpson |
|
Sara82
Junior Member
|
3. September 2006 @ 12:50 |
Link to this message
|
|
Hi thanks for replying, could the disc's just stop working, I've been using them for over 6 months now and I've never had any problems before.
Sara
|
Moderator
|
3. September 2006 @ 12:58 |
Link to this message
|
|
The brands you are using use different manufacturers so you might get a different one in each spindle - some manufacturers are worse than others. Optodisc is not a good one.
To rule that out use the ones 300bowler lists - these are good quality.
|
Senior Member
|
3. September 2006 @ 13:07 |
Link to this message
|
Disc Manufacturer ID: OPTODISC, Media Type ID this is where it will tell u the quality of the disk.
u can see the Manuf. ID using DVD Decrypter,DVD indentifier,DVD Info pro
edit
took out what binkie said already, no sense in having an echo
"When I look at the smiles on all the childrens faces, I just know theyre about to jab me with something."- Homer Simpson
This message has been edited since posting. Last time this message was edited on 3. September 2006 @ 13:12
|
|
Sara82
Junior Member
|
4. September 2006 @ 01:35 |
Link to this message
|
|
I tried some discs with an id of AML-002-00 and guess what its working. I looked on one of those dvd class guides and it said that, they were pathetic garbage and the optodisc 8 were better. Thanks for all your help, I'm still not completely happy with how its working but at least I know the burner isn't bad.
|
|
crowy
Suspended due to non-functional email address
|
4. September 2006 @ 02:27 |
Link to this message
|
|
I only use tdk discs.Never a problem.
If the facts dont fit the theory, change the facts." -- Albert Einstein |
|
Sara82
Junior Member
|
4. September 2006 @ 03:39 |
Link to this message
|
|
Hi I was just wondering if anyone could tell me whether the speed of the disc makes any difference I have been using 8x discs though I dont know why, I think thats just what we had around. Also if anyone knows of any other discs with an id of AML-002-00 I would be grateful, because I looked but cant really find any.
Thanks
P.s what would you say about MCC 003 Discs? They are a brand called tuffdisc and are pretty cheap, but cheapness doesn't seem to make a difference with my computer!
This message has been edited since posting. Last time this message was edited on 4. September 2006 @ 03:45
|
Senior Member
|
4. September 2006 @ 08:31 |
Link to this message
|
hello Sara,
Quote:
I'm still not completely happy with how its working but at least I know the burner isn't bad.
If u try Verbatims, or Taiyo Yudens, you will be completely happy.
Also if u catch the Verbatims on sale u can get them as cheap as other cheap media, they also seem to go on sale at least once a month if not twice, especially at stores like Best Buy, and officeMax.
Quote:
P.s what would you say about MCC 003 Discs?
MCC 003, is top notch disks and they make Verbatims.
Are those tuffdiscs max 16x speed, MCC 003 is the new verbatims 16x speed disks
Also a good rule to burning speeds is to burn at half the max speed that is on the disk EX. 16x Max u would burn at 8x speed
"When I look at the smiles on all the childrens faces, I just know theyre about to jab me with something."- Homer Simpson
|
|
Sara82
Junior Member
|
4. September 2006 @ 08:44 |
Link to this message
|
Hi thanks for replying again. The discs are called tuffdisc overprint(8x)ADVDInfo: MCC 003 and they are £6.70 for 50 discs. Maybe the reason they are cheap is because they are quite ugly. They do say that they are compatible with a pioneer 108. When you were talking about the speeds of the discs does that mean that if I have an 8x disc I should change the setting in Nero to 4x, because usually I just use the maximum setting, and will 16x discs work for me or do you have to have a special writer for that speed of disc to work?
I realised today as well that I have been using optodisc for over about 2 years because an old disc that I used to use called goalover was also optodisc and I never had any problems with them either.
Just one more thing do you think updating the drivers or firmware of the pioneer will help, not that I know how to do that but if it helps I might look into it.
Thanks again
This message has been edited since posting. Last time this message was edited on 4. September 2006 @ 08:45
|
Senior Member
|
4. September 2006 @ 09:30 |
Link to this message
|
|
I have a pioneer DVR-108 which can burn at 16x speed but i would not reccomend burning that high, especially not if using low quality disks, but like i said earlier its best to burn the 16x max speed at 8x, or 8x max speed at 4x.
also i think binkie said that there wasn't an update for ur OEM model.
"When I look at the smiles on all the childrens faces, I just know theyre about to jab me with something."- Homer Simpson
|
Moderator
|
4. September 2006 @ 09:58 |
Link to this message
|
@Sara82
You can try the 1.20 firmware update. Worse case you'll receive an error 'target drive not found' - no harm.
I don't think Advent and Medion are the same company (could be wrong) and Pioneer may support this drive.
http://forum.rpc1.org/dl_firmware.php?download_id=1898
Download 1.20 from the link - it's an exe file.
Make sure no blanks in drive,close running programs & keep power on.
I think on Pioneers you save the file first then run it. Takes less than a minute. Reboot and the firmware will be updated.
|
|
Sara82
Junior Member
|
5. September 2006 @ 00:44 |
Link to this message
|
Thank you for finding me the update, its very nice of you.I just tried some proper sony discs in Nero recode and it said it had burnt but when I checked the disc it hadn't and the disc looks like it can be used again, I probably should have saved the log, but I will try again later and save the log. I think I might order some of those tuffdiscs I was talking about earlier because although they are cheap 300bowler said that ID, means they are good, I might order a few other types just to see and one of those things to clean the lens. If I do the update and it works can I do a system restore if something goes wrong, or is the update there forever?
Thanks again for all your help
P.s As I said I have managed to make some discs with Nero recode and the aml002, so I thought I would post the successful log in case that shows something up
Project type: Copy entire DVD
Target size: DVD5 (2282925)
09:50:51 File LangStreamPatcher.cpp, Line 56
Command table patching started...
09:50:51 File LangStreamPatcher.cpp, Line 133
All tables successfully patched!
Burn settings:
Target: PIONEER DVD RW DVR-108
Number of copies: 1
Write speed: 0 KB/s
Temp folder: C:\Documents and Settings\sara\My Documents\Nero Recode (198485536768 bytes free)
Direct burning: true
Target media: DVD+R/RW, DVD-R/RW, DVD-RAM, DVD-R DL, DVD+R DL
Shutdown when finished: false
Advanced Analysis: false
Compress Adaptive: false
09:51:01 File burn_dvdfiles.cpp, Line 231
Compile DVD: init
VMG Menus Vobs [2 vobus] 0.25MB -> 0.12MB [R 1.00]
Video: 0.11MB, extra: 0.00MB
Audio: 0 streams
Subpicture: 1 streams
0. 0. Unspecified 0.00MB [enabled]
VTS_01 Title Vobs [11527 vobus] 3259.92MB -> 3259.92MB [R 1.00]
Video: 3058.58MB, extra: 201.34MB
Audio: 1 streams
0. 0. MPEG-1 2-ch Unspecified 178.82MB [enabled]
Subpicture: 1 streams
0. 0. Unspecified 0.00MB [enabled]
09:51:02 File burn_dvdfiles.cpp, Line 1152
Compile DVD: begin copy 1
09:51:04 File NeroRecorderBase.cpp, Line 488
Writing to disc: DVD+R
09:51:04 File NeroRecorderBase.cpp, Line 502
Free capacity on disc: 2283092 sectors (2295104)
09:51:05 File burn_dvdfiles.cpp, Line 479
Compile DVD: burning 2283092 sectors (1669213 required)
09:51:05 File burn_dvdfiles.cpp, Line 656
Compile DVD: adjust target size to 4459.16MB (3260.18MB obtained)
09:51:05 File burn_dvdfiles.cpp, Line 524
Compiling DVD Volume started
09:51:05 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VMG Menus Vobs
VMG Menus Vobs:
Original 0.25MB -> Expected 0.12MB -> Output 0.12MB
Finished error 0.00MB
Ratio encoded = 0
Original encoded = 1
Slide encoded = 1
StillImage encoded = 0
Output extra size = 0.01MB
Source video size = 0.11MB
Pictures Modified [I 1] [P 0] [B 0]
09:51:05 File vob_record.cpp, Line 643
DirectBurn offset: VIDEO_TS.VOB 16
09:51:27 File vob_record.cpp, Line 643
DirectBurn offset: VTS_01_1.VOB 160
10:14:35 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VTS_01 Title Vobs
VTS_01 Title Vobs:
Original 3259.92MB -> Expected 3259.92MB -> Output 3259.92MB
Finished error -0.00MB
Ratio encoded = 2
Original encoded = 11525
Slide encoded = 0
StillImage encoded = 0
Output extra size = 201.01MB
Source video size = 3058.92MB
Pictures Modified [I 0] [P 0] [B 19]
10:15:15 File dvd_record.cpp, Line 420
DirectBurn offset: VTS_01_0.IFO 112
10:15:19 File burn_dvdfiles.cpp, Line 547
Compile DVD: completed successfuly (3260.18MB)
----- Begin NeroAPI error log --
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\NeroVision\NeroFiles\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero API version: 6.6.0.18
Using interface version: 6.6.0.9
Installed in: C:\Program Files\Ahead\NeroVision\NeroFiles\
Application: Ahead\Nero Recode
Internal Version: 6, 6, 0, 18e
Recorder: <PIONEER DVD RW DVR-108> Version: 1.18 - HA 2 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 2
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD2500JD-00HBB0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD RW DVR-108 atapi Port 2 ID 0 DMA: On
CdRomPeripheral : IDE DVD-ROM 16X atapi Port 2 ID 1 DMA: Off
CdRomPeripheral : AXV CD/DVD-ROM 2.2a xmasscsi Port 4 ID 0 DMA: Off
=== CDRom-Device-Map ===
PIONEER DVD RW DVR-108 D: CDRom0
IDE DVD-ROM 16X E: CDRom1
AXV CD/DVD-ROM F: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 66060288 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 447MB (457964kB)
Free physical memory: 267MB (273700kB)
Memory in use : 40
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
5.9.2006
NeroAPI
10:15:19 #1 Phase 175 File APIProgress.cpp, Line 276
Finalizing disc started
10:15:19 #2 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
10:15:19 #3 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
10:15:19 #4 Text 0 File BurnAtOnceRecorder.cpp, Line 3247
Writing filesystem of size 1114112 at sector 0
10:15:19 #5 Text 0 File BurnAtOnceRecorder.cpp, Line 2943
Writing VIDEO_TS.IFO at sector 544
10:15:19 #6 Text 0 File BurnAtOnceRecorder.cpp, Line 3171
Writing VIDEO_TS.VOB at sector 560
10:15:19 #7 Text 0 File BurnAtOnceRecorder.cpp, Line 2971
Writing VIDEO_TS.BUP at sector 624
10:16:40 #8 Phase 177 File APIProgress.cpp, Line 276
Disc finalized successfully
10:16:45 #9 Phase 37 File APIProgress.cpp, Line 276
Burn process completed successfully at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 04/08/2004 13:00:00
File 'Drivers\CDRALW2K.SYS': Ver=7.0.1.39 , size=24576 bytes, created 03/04/2004 13:32:20
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 05/08/2006 19:58:36 (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
----- End NeroAPI error log -----
10:16:45 File burn_dvdfiles.cpp, Line 301
Compile DVD: exit
This message has been edited since posting. Last time this message was edited on 6. September 2006 @ 01:46
|
Moderator
|
5. September 2006 @ 15:39 |
Link to this message
|
Hi Sara82
The firmware update to your drive goes to your drive memory - not the pc's so no system restore on the pc would be needed.
Normally if the target device can't be found you'll get an error message and the drive wouldn't be flashed.
I run a lens cleaner thru by drives every so often - may help a bit.
For the new log - need to edit out the serial - begins w/1A and is under this = ----- Begin NeroAPI error log -----
Only diff I see is a lower burn speed - 2.4x.
For burning - Nero automatically saves a log - look here for the Sony one: program files>ahead>nero>nerohistory.
Does this Sony disc play in anything?
|
|
Sara82
Junior Member
|
6. September 2006 @ 01:52 |
Link to this message
|
|
Hi Thanks for replying, the sony disc was completely blank, in fact I managed to record on to it in a standalone dvd recorder. I decided to get a new writer, a man is coming to fit it. We decided to get a 16x writer and the man told me that if we use 8x discs in it, it will take about 15 minutes to copy a full dvd. Does that sound right to you, because I dont want it to be slow because there is something wrong with it, and him tell me its because I'm using 8x discs. Thanks for reminding me about the serial I looked before but couldn't find it.
This message has been edited since posting. Last time this message was edited on 6. September 2006 @ 10:41
|
Moderator
|
6. September 2006 @ 16:28 |
Link to this message
|
|
Doing just a copy to copy would take about 15 mins total but when the burn process starts should take no longer than 8mins at 8 x to a single layer disc (ones's your using).
I burn at 8x a lot - never took 15 mins for the burn process.
Keep us posted on the new burner!
|
|
Sara82
Junior Member
|
8. September 2006 @ 11:31 |
Link to this message
|
Hi, back again. The man came and installed a new pioneer dvr-11d and although it works with the datawrite discs its very slow. It still takes almost half an hour to do a disc copy in Nero recode and he says it not a memory problem as when he tried it in safe mode, it still took ages to copy. He suggests that I reinstall xp but I dont really want to do that, so has anyone got any ideas, is it back to a firmware update and if so which one? Thanks again
|
|
Advertisement
|
|
|
Moderator
|
8. September 2006 @ 15:03 |
Link to this message
|
Hi Sara82
Is this drive a DVR-111D? See what the current firmware version is - go to Nero ToolKit>InfoTool. Pick the Pioneer drive and the drive tab. There is a field there for the firmware version.
Using recode to do a backup may take 30 mins total time - depends on the compression being used, write speed.
Here's a few more suggestions (regularly maintenance) if you haven't done this very recently:
°Run a registry cleaner - here's a good free one - ccleaner
http://ccleaner.com
°Do a windows disc cleanup
°Do a system defrag
Keeping up on virus and spyware scans too?
Do a sy
|
|
