|
|
|
Sudden DVD Shrink Burn Errors=5 Coasters!
|
|
|
mtmagpie
Newbie
|
1. December 2006 @ 18:54 |
Link to this message
|
I have been using DVD Shrink w/Nero Burning Rom for over 2 years without a problem. Now, within the last week I have had 5 burn errors. I use Verbatim DVD-R 8x media, and my drive is a Sony DW D56A. I don't know if I am having a software, hardware, or media problem. I have checked to make sure DMA is on, and I have uninstalled and reinstalled the driver but I still continue to get errors. I am not getting errors on every burn, just sporadically. Suggestions? I appreciate the expertise here! Thanks in advance!
|
|
Advertisement
|
|
|
|
AfterDawn Addict
|
1. December 2006 @ 20:22 |
Link to this message
|
What burn errors are you getting? What version of Nero are you using?
Can you post a burn log?
If Nero 7...
C:\Program Files\Nero\Nero 7\Core\NeroHistory.log
If Nero 6...
C:\Program Files\Ahead\Nero\NeroHistory.log
Could be your burner is dying, you have loose cables or a slight possibility your PC is overheating. Maybe some component like your hdd is failing. What I key in on is:
Quote:
I am not getting errors on every burn, just sporadically.
This points to a hardware problem.
Problems with software usually result in an error with every burn, everything else being equal.
Thats why a log would be good to look at.
Check out your PC; open it up and make sure the cables are tight and all the cooing components and passages are clean. Gently blow out the burner with compressed canned air.
Have you installed any new programs lately?
Now would be a good time to back up any important files and serial numbers you may have.
|
|
mtmagpie
Newbie
|
2. December 2006 @ 14:27 |
Link to this message
|
It happened again...here is my error:
1A23-serial number removed by creaky
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM
Nero API version: 6.6.0.13
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 13c
Recorder: <SONY DVD+-RW DW-D56A> Version: PDS7 - HA 0 TA 0 - 6.6.0.13
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
CdRomPeripheral : SONY DVD+-RW DW-D56A atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD800JD-75JNC0 atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
SONY DVD+-RW DW-D56A D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 73400320 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 502MB (514124kB)
Free physical memory: 118MB (121044kB)
Memory in use : 76 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
2.12.2006
NeroAPI
3:43:01 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
3:43:01 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
3:43:01 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
3:43:01 PM #4 Text 0 File Reader.cpp, Line 127
Reader running
3:43:01 PM #5 Text 0 File Writer.cpp, Line 122
Writer SONY DVD+-RW DW-D56A running
3:43:01 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
3:43:01 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
3:43:01 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
3:43:01 PM #9 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-At-Once, using DVD media
4:12:28 PM #10 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2202175 (489:22.25, 4301MB)
4:12:28 PM #11 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO
4:12:28 PM #12 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: SONY DVD+-RW DW-D56A, Media type: DVD-R
Disc Manufacturer: MCC 02 - RG20
Disc Application Code: 64, Disc Physical Code: 193
4:12:28 PM #13 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.)
4:12:28 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2202176 (2202176) = #2202176/489:22.26
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2202176 blocks [SONY DVD+-RW DW-D56A]
--------------------------------------------------------------
4:12:28 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [SONY DVD+-RW DW-D56A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4510056448, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2202176 | lead-out | 1 | 0x41 | 0x00
4:12:29 PM #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
4:12:29 PM #17 Text 0 File Burncd.cpp, Line 4051
Cache writing successful.
4:12:29 PM #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
4:12:29 PM #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 8x (11,080 KB/s)
4:12:29 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
4:12:29 PM #21 Text 0 File DVDR.cpp, Line 2267
Recording mode: Sequential Recording Mode
4:12:29 PM #22 Text 0 File Mmc.cpp, Line 21469
Set BUFE: Power-Burn -> ON
4:12:29 PM #23 Text 0 File DVDR.cpp, Line 2421
Start write address at LBA 0
DVD high compatibility mode: Yes
4:12:29 PM #24 Text 0 File Cdrdrv.cpp, Line 8438
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
4:12:53 PM #25 Text 0 File Cdrdrv.cpp, Line 1288
16:12:53.156 - SONY DVD+-RW DW-D56A\H0 T0 : Queue again later
4:23:43 PM #26 SCSI -1135 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x0A995A00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x5C 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00
4:23:43 PM #27 SCSI -1046 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x0AF90000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 0x00 0x00 0x1D 0xBD 0x80 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05
4:23:43 PM #28 CDR -1135 File Writer.cpp, Line 311
Write error
SONY DVD+-RW DW-D56A\H0 T0
4:23:43 PM #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
4:23:43 PM #30 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
4:23:43 PM #31 Text 0 File DVDR.cpp, Line 2658
EndDAO: Last written address was 1949055
4:23:43 PM #32 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 8x (11,080 KB/s)
4:23:43 PM #33 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
4:23:43 PM #34 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 11:07:32 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.27a, size=20576 bytes, created 1/26/2005 2:03:00 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
This message has been edited since posting. Last time this message was edited on 2. December 2006 @ 14:29
|
AfterDawn Addict
|
3. December 2006 @ 17:23 |
Link to this message
|
Just a couple of things:
First, your firmware is not current....As near as I can tell from rpc1 anyhow....
http://forum.rpc1.org/dl_result.php?kaj=1&isces
It does not list your current firmware. It does show an update though.
Here is a quote from the user's guide:
Quote:
SONY DW-R56A 8X Slim DVD+RW Drive User's Guide
Writable Format and Modes Supported
CD-R
Low speed CD-RW
High speed CD-RW
Ultra speed CD-RW
Ultra Plus speed CD-RW
DVD+R
DVD+RW
DVD+R9 (Double layer)
here is what you are trying to burn:
Quote:
4:12:29 PM #24 Text 0 File Cdrdrv.cpp, Line 8438
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R
Here is a spec sheet from videohelp that says the same thing:
http://www.videohelp.com/dvdwriters.php?...ch=Search&list=
OK... I spent a few minutes Googling around and could not find anything that tells me this drive is capable of burning -R media.
Get some Verbatim +R media and try that. I may be mistaken, but so far I can't find anything that says -R will work.
|
|
mtmagpie
Newbie
|
5. December 2006 @ 15:18 |
Link to this message
|
I appreciate your responses. I have been burning to DVD-R (Verbatim) discs for 3 years, so I don't think that is the problem. My burn errors are surfacing every 8th or 9th burn so I am beginning to think it is a problem with the drive. I plan on doing as you suggested and opening the PC and trying some maintenance steps. I should also probably mention that this is my second D56A drive because the original that came with the PC failed after 10 months. If this is yet another drive failure, does anyone have any suggestions for a replacement? The D56A is a slim drive (like a laptop) but my computer is a desktop (the drive is place vertically). Is an external drive the answer or is there a compatible drive I could use instead of the D56A? Thanks a ton for all of the help! I love this forum!
|
|
Advertisement
|
|
|
AfterDawn Addict
|
6. December 2006 @ 15:06 |
Link to this message
|
Sony DW-D56A (rebadged LiteOn SOSW-852S)
? PYS1 - stock (2004/09/24)
? PDS3/PDS6/PDS7 - stock (2005/07/01) (Dell OEM)
? PFS1/PFS2/PFS3 - stock (2005/05/27) (Vaio OEM) (newer than PDS7)
Sony DW-R56A (rebadged LiteOn SOSW-862S - no dash support)
? QDS1 - stock (2004/05/13)
I'd try updating it from the current PDS6 to the PDS7 fw version.
Bump the burn speed down to 4x.
Quote:
Free physical memory: 118MB (121044kB)
Memory in use : 76 %
Disable all background programs that are not needed- firewall,antivirus,screen saver,messenger,etc
If this is your second drive,I'd definitely find a higher quality drive in the future. I love benq's,but they are getting very scarce.I have yet to wear any of my 4 benq's out after 1000's of burns. Well over 3500+ on my original 1620 and still holding strong. 1 coaster every 400+ backups,even with crappy cmag and prodisc media. Plextor makes some sweet drives,as well as Lite-on,pioneer,LG,and NEC.
I'm not keen on external drives,internal would be the best option for your desk top. If wanting to go with external,I'd get a separate external enclosure and an NEC drive to place it in and hook it up via USB 2.0.
HP a1118x-b/athlon 64-3300+/BenQ 1650 BCDC/LG 8163B/Modded Wii/Epson-R300 and Ty Watershields!!! |
|
