|
Can't copy saw 3 - **just needs DVDFab Decrypter**
|
|
|
aabbccdd
Suspended permanently
|
3. February 2007 @ 22:54 |
Link to this message
|
|
slickflix, what media are you using? and which format?
you would have the best chace with the DVD dash R format using Taiyo Yuden and or Verbatim burning at 4x
|
|
Advertisement
|
|
|
|
|
slickflix
Junior Member
|
3. February 2007 @ 23:57 |
Link to this message
|
aabbccdd
All my films are done on Memorex DVD+R at 16 speed. The thing is though, this is the first time I've ever had this problem. I've played maybe 100 of the exact same discs on this XBOX without any problems.
My concern is that I just didn't burn it properly. The same disc plays on my PC, without any problems, as a DVD. On my first few runs trying to burn Saw 3, a problem I encountered was the disc only playing as seperate VTS files. But after using PacMan's formula (Ripit4me, DVD dycrypter, DVD Shrink), I completed a disc that is identified as a DVD and automatically opens with "PowerDVD".
Anyway, thanks for swift responce aabbccdd. I'm going to go ahead and keep backing up my original disc in various ways and see if there's any improvment.
|
|
aabbccdd
Suspended permanently
|
4. February 2007 @ 00:03 |
Link to this message
|
Quote:
All my films are done on Memorex DVD+R at 16 speed. The thing is though, this is the first time I've ever had this problem. I've played maybe 100 of the exact same discs on this XBOX without any problems.
alot of memorex will code out as CMC mag if thoughs do its probably the problem.its some of the worst media on the market. three things you can do
1. get the better media as i said Taiyo Yuden and or Verbatim
2. booktype the DVD+R to DVD-ROM
3. and slow down your burn speed to at least 8x max.
and at least do the last two things i mentioned if your don't change your media
This message has been edited since posting. Last time this message was edited on 4. February 2007 @ 00:05
|
|
slickflix
Junior Member
|
4. February 2007 @ 00:09 |
Link to this message
|
|
aabbccdd
I'll give all three a try. Wasn't aware of Memorex's poor quality, I wish I'd known sooner, I've been using them for going on a year now. I really appreciate the help though, many thanks.
And for all you Football fans watching the game today, go Bears!
|
|
aabbccdd
Suspended permanently
|
4. February 2007 @ 00:21 |
Link to this message
|
|
slickflix, yeah the memorex isn't the best stuff out there lol.
and since i am in Indianapolis Go Colts!!!!!!!!!! lol
|
|
PacMan777
AfterDawn Addict
|
4. February 2007 @ 02:03 |
Link to this message
|
Originally posted by slickflix:
aabbccdd
I'll give all three a try. Wasn't aware of Memorex's poor quality, I wish I'd known sooner, I've been using them for going on a year now. I really appreciate the help though, many thanks.
And for all you Football fans watching the game today, go Bears!
The rep Memorex developed is from a couple of years ago. CMC has been making media for other companies since then and I've not heard the same outcry. Supposedly they even made some of Verbatim's media in the past. But in a situation where quality may be an issue, it is best to go with a proven brand and manufacturer. Why don't you run DVD Identifier (just google) and let us know for sure who made your Memorex. Most of us haven't used any in a couple of years.
abcd was right, booktyping to DVD ROM does make a copy more compatible for some players. It has a couple of requirements though. A burner that can booktype, not all can, and +R media, -R doesn't work. Also, most people who do a lot of video backups realize the possibility for errors increase with speed. That doesn't mean you'll get errors every time you do a burn, but the odds increase you may. It just pays to go slower, you're only saving a few minutes per backup with the faster burn.
|
|
Kayfc
Newbie
|
4. February 2007 @ 05:25 |
Link to this message
|
|
Thanks BriMo59, but what I mean is that if I have the ISO file or working DVD, is there a way to modify it so that I can add a new selectable audio track.
|
AfterDawn Addict
|
4. February 2007 @ 05:41 |
Link to this message
|
|
My Benq1650s with Qsuite running refuse to burn memorex CMC mags faster than 4X. Qsuite recognizes a POS when it sees one.
|
|
aabbccdd
Suspended permanently
|
4. February 2007 @ 09:01 |
Link to this message
|
|
slickflix,
the biggest problem IMO is the burn speed 8x max. even 6x or 4x if your having playback problem
|
|
PacMan777
AfterDawn Addict
|
4. February 2007 @ 11:42 |
Link to this message
|
|
Even with a Plex and burning TY I don't burn video faster than 6X. As I mentioned, it can be done, but why take the chance. As abcd said, it's a good idea to get away from those fast burn speeds if you're having any problems. Then do as he said and switch to some +R media and booktype it if your burner will booktype. Then switch media if you think necessary. I'm still curious, who manufactured your Memorex?
|
|
aabbccdd
Suspended permanently
|
4. February 2007 @ 11:51 |
Link to this message
|
|
or even try the Taiyo Yuden DVD dash R thats what i use and they play in every dvd player i throw them at
|
|
slickflix
Junior Member
|
4. February 2007 @ 12:24 |
Link to this message
|
I went ahead and lookd up the manufactuerer of Memorex DVDs, if I read correctly it is a company called Ricoh. I'm not too concerned with disc types, I have more than 150 movies on the same discs and never had trouble playing them. When I get a chance I'll go ahead and try the "Pacman" process at a slower burn speed. It's a bit of a frusterating experience, up to this point I've been burning for the last year using only DVD Shrink (supported by Nero), which can finish a disc in like 35 minutes.
|
|
PacMan777
AfterDawn Addict
|
4. February 2007 @ 12:58 |
Link to this message
|
Originally posted by slickflix:
I went ahead and lookd up the manufactuerer of Memorex DVDs, if I read correctly it is a company called Ricoh. I'm not too concerned with disc types, I have more than 150 movies on the same discs and never had trouble playing them. When I get a chance I'll go ahead and try the "Pacman" process at a slower burn speed. It's a bit of a frusterating experience, up to this point I've been burning for the last year using only DVD Shrink (supported by Nero), which can finish a disc in like 35 minutes.
Interesting... Ricoh is one of the better manufacturers. They've manufactured media for top brands and was/is some of the best they offer. Verbatim has sold them as well as other top brands. That was one I used to try to keep track of till I started using Sony. The code usually reads ricohjpn. I have a lot of backups on Ricoh media and a lot of that with Memorex. So, if you're using Ricoh, I wouldn't worry too much about the media. I've heard nothing bad about Ricoh recently. That's a plus for Memorex. Those memo don't suck.
BTW, if you use the "Pacman" process (which is simply using RI4M as the ripper), then I suggest using a burner with speed control and not using DVD Decrypter as a burner. I used DVD Shrink as a transcoder in the example, but most good transcoders and encoders will work just as well. Back when 4X media was available burn speed wasn't much of an issue. I think some people were saying to burn at 2X then. ;) But I don't think I want a burner trying to hit 16X while burning video. If you want to go with a free burner use ImgBurn or something with speed control.
This message has been edited since posting. Last time this message was edited on 4. February 2007 @ 13:05
|
|
slickflix
Junior Member
|
4. February 2007 @ 15:21 |
Link to this message
|
|
I'm trying to follow your last post Pacman but I keep getting lost. So you're recomending I use another program instead of Dycryptor, I just can't figure out what to use instead and how to run in in conjuction with Ripit4me. If you could break this down a little clearer I'd be really grateful.
|
|
PacMan777
AfterDawn Addict
|
4. February 2007 @ 15:33 |
Link to this message
|
Originally posted by slickflix:
I'm trying to follow your last post Pacman but I keep getting lost. So you're recomending I use another program instead of Dycryptor, I just can't figure out what to use instead and how to run in in conjuction with Ripit4me. If you could break this down a little clearer I'd be really grateful.
DVD Decrypter has 2 functions. It's a ripper-decryption tool and also a burner app. With RI4M is is used for a ripper-decrypter. At the end where I say it's a supported burner with Shrink, it's just that, a supported burner just like the burning rom from Nero is also supported. But for best quality a burner program with speed control needs to be used. You have to have DVD Decrypter (as a ripper-decrypter) for use with RI4M or it won't work. However, you don't have to have DVD Decrypter for use as a burner with Shrink. With file swapping ImgBurn can be used as a supported burner with Shrink. But without knowing how, you'd need to burn an ISO to the hard drive with Shrink and then open the ISO in ImgBurn. If you have Nero, it's simplest to use it. VSO's CopyToDVD is also supported if I remember correctly. One of the VSO burners is, it doesn't show up in Shrink unless the program is loaded though.
|
|
Kenny0372
Suspended due to non-functional email address
|
4. February 2007 @ 18:03 |
Link to this message
|
I came across the same problem when I tried to make a backup copy of Saw III, I use DVD Shrink most of the time when I make backups. A couple of friends of mine recommended DVD Fab Platinum. I downloaded the trial version of DVD Fab platinum and in less than 31 minutes I had a beautiful copy of Saw III.
|
|
slickflix
Junior Member
|
4. February 2007 @ 19:05 |
Link to this message
|
|
Wow, I don't know where to begin. I just completed by 8th attempt at burning Saw 3. Used Ripit4Me + DVD Dycyptor followed by Shrink which I used to make an Image File which I burned with Imgburn at 2X speed. I loaded the disc into my XBOX, I heard the same scratching sound it's been making before with the other copies of Saw 3.... but this time after a few seconds the screen went black (usually it holds on the loading disc screen). It stayed black for a long time so I tried pressing the "chapter forward" button... and low and behold, the 2nd chapter of the movie popped up.
The movie is now playing as I type this. The problem was loading the initial menu. I've got a completed copy of the movie now... so I'm happy, the whole menu business is puzzling though, to say the least.
|
|
aabbccdd
Suspended permanently
|
4. February 2007 @ 19:12 |
Link to this message
|
|
doing the movie only will cause you less problems
COLTS WIN!!!!!!!!! COLTS WIN!!!!!!!!!!! COLTS WIN!!!!!!!!!!!!COLTS WIN!!!!!!!!! COLTS WIN!!!!!!!!!!!! COLTS WIN!!!!!!!!! COLTS WIN!!!!
COLTS WIN!!!!!!!!! COLTS WIN!!!!!!!!!!! COLTS WIN!!!!!!!!!!!!COLTS WIN!!!!!!!!! COLTS WIN!!!!!!!!!!!! COLTS WIN!!!!!!!!! COLTS WIN!!!!
This message has been edited since posting. Last time this message was edited on 4. February 2007 @ 19:13
|
|
slickflix
Junior Member
|
4. February 2007 @ 19:32 |
Link to this message
|
|
After all this work I really can't stop at "movie only". I don't even like the movie that much, I just have to complete this task. It's a matter of pride.
Grr. I've got common sense so I wasn't going into this game with very much hope that Bears would win. Their offense has been stinking it up since the New Year. We need a new QB.
|
|
aabbccdd
Suspended permanently
|
4. February 2007 @ 20:38 |
Link to this message
|
|
Grossman young he will be back ready to go next year. and yeah there offense looked horrible tonight but alot of that was due to the Colts outstanding defense. Bob Sanders looked great on our in
|
|
PacMan777
AfterDawn Addict
|
4. February 2007 @ 20:46 |
Link to this message
|
|
The Bears had one of the best defenses all year, but Peyton managed okay. Grossman's game was just gross. LOL I know, bad pun.
I think just about everyone has Saw 3 under control now. If not, update the software.
|
|
aabbccdd
Suspended permanently
|
4. February 2007 @ 21:01 |
Link to this message
|
|
the AFC teams look better than most the NFC teams and the Bears didn't have that tough of a schedule this year at all . so they were probably a little over rated. and the Colts never get any repect(the press/NLF today etc. cans them all the time) being there a small market team but they showed them tonight!!
This message has been edited since posting. Last time this message was edited on 4. February 2007 @ 21:03
|
|
nocanndo
Suspended due to non-functional email address
|
4. February 2007 @ 21:38 |
Link to this message
|
I USED DVDFAB 3 AND DVDIdle PRO AND IT MADE PERFECT COPIES.
|
|
PacMan777
AfterDawn Addict
|
5. February 2007 @ 01:13 |
Link to this message
|
Originally posted by nocanndo:
I USED DVDFAB 3 AND DVDIdle PRO AND IT MADE PERFECT COPIES.
Add to that your ability to type in all caps and you may get a visit from ddp. ;)
|
|
Advertisement
|
|
|
|
ddp
Moderator
|
5. February 2007 @ 09:06 |
Link to this message
|
|
yes!!!
|
