|
Winstaller UPDATE 10-14-07
|
|
|
lcte
Suspended due to non-functional email address
|
5. April 2007 @ 12:35 |
Link to this message
|
|
I have a psp: 2.71 ta-082 with both ic1003 and ic6001 numbers. i use devhook to play psp images in emulated 3.01 firmware, and another devhook (0.4x launcher for 2.71) to emulate a 1.5 psp. my question is:
i would like to install any of this new firmwares made by dark alex, but i need to downgrade my psp and i have read that downgrading my psp bricks it. In an emulated 1.5 psp, is it possible to execute the 3.03oe-c (or 3.10oe-a) installer and install? would it work? would i have a custom firmware installed without downgrading or would my psp become broken? Thanks!! My msn is [removed]
This message has been edited since posting. Last time this message was edited on 5. April 2007 @ 13:37
|
|
Advertisement
|
 |
|
|
Moderator
|
5. April 2007 @ 13:38 |
Link to this message
|
|
lcte,
Read the forum rules - posting email addies isn't allowed.
My killer sig came courtesy of bb "El Jefe" mayo.
The Forum Rules You Agreed To! http://forums.afterdawn.com/thread_view.cfm/2487
"And there we saw the giants, and we were in our own sight as grasshoppers, and so we were in their sight" - Numbers 13:33 |
Senior Member
|
5. April 2007 @ 14:15 |
Link to this message
|
|
|
ponchoyo
Newbie
|
5. April 2007 @ 16:18 |
Link to this message
|
|
whats the latter? in english plz
poopY
This message has been edited since posting. Last time this message was edited on 5. April 2007 @ 16:19
|
|
botoys23
Suspended due to non-functional email address
|
5. April 2007 @ 16:22 |
Link to this message
|
|
hey guys. im really having a hard time upgrading my 2.71 se-c to a 3.03 oe-c. major help needed please?
which kernel should i be in when upgrading using the installer?
i reformatted my mem card but i still dont have the GAME150 folder for the oeupdmaker, or the recovery folder to go back to 1.5 then up to 3.03 oe-c..
help please?...
|
|
HReaper
Newbie
|
5. April 2007 @ 19:47 |
Link to this message
|
Go to this site, it is one of the best to help ALL downgrading and Upgrading including files for doing either, nuff said.....
http://www.psp-hacks.com/psp-hacks.php
PSP Hacks, tutorials, mods, cracks, utilities, homebrew
|
Senior Member
|
5. April 2007 @ 21:13 |
Link to this message
|
Originally posted by ponchoyo:
whats the latter? in english plz
the second one u said, GAME150
botoys23
i think it should be kernal 1.5. or to be on the safe side, go back to 1.5 and then upgrad from there
|
|
ponchoyo
Newbie
|
6. April 2007 @ 09:45 |
Link to this message
|
|
ok chan man but where does GAME150 go? does it go in PSP: or in PSP;/
nevermind i got it to work homebrews somebody should of said it was suposed to be like DRIVE:PSP/GAME150
poopY
This message has been edited since posting. Last time this message was edited on 6. April 2007 @ 09:49
|
|
juan2320
Senior Member
|
6. April 2007 @ 11:55 |
Link to this message
|
charlywho you need to see a corrupted icon for the recovery.(that is ok)
now turn your psp off and when you turn your psp on hold the R butten so you go in to the recovery menu.
phredd99 update to 2.71 and down to 1.5(No GTA needed)
go here http://www.psp-haxors.com/forums/showthread.php?tid=990
galinha look in the GAME150 are they folders there?
if they are in GAME move them to GAME150.
This is how your MS needs to looks
PSP/GAME150(1.5 app's)
PSP/GAME (psx games)and app's
ISO/(iso games)
AKqZ No there are games that need a UMD game.(that is why more games work with No UMD mode off)
lcte you can not use this in Devhook with 1.5 FW emulated.(you will brick)
your psp has to be 1.5 go to the link in this post to downgrade.
ponchoyo what letter?
botoys23 if you don't have the GAME150 folder you can make it.(that is where the folders need to go)
..._...|..____________________, ,
....../ `---_juan2320__----_____|] = = = D
...../_==o;;;;;;;;_______.:/
.....), ---.(_(__) /
....// (..) ), ----"
|
|
harv4206
Suspended due to non-functional email address
|
7. April 2007 @ 04:27 |
Link to this message
|
|
whats the differnece betweeen 3.03oe-c and 3.03oe-a? is it just an improved version, and if so which one is the best?
Black uk psp factory 1.5 > 3.03 oec > 3.51 M33
<p>games currently on stick : transformers, shrek 3(coz im hard) and harry potter 5(coz im hard) |
|
Seroth
Suspended due to non-functional email address
|
7. April 2007 @ 05:36 |
Link to this message
|
|
Extremely noobish question, sorry if I'm bothering any of you guys with this, but I want to know for sure before putting stuff on my psp that might brick it;
I have firmware version 2.60 (with the option to update to 3.30), now, am I able to succesfully install this and make it work, so I can play games from my memory card? All I wanted to know! thanks!
This message has been edited since posting. Last time this message was edited on 7. April 2007 @ 05:42
|
|
botoys23
Suspended due to non-functional email address
|
7. April 2007 @ 05:44 |
Link to this message
|
|
ok so i put the recovery folder in the PSP/GAME/GAME150 in the 1.50 kernel mode then i put a 1.50 eboot.pbp named "UPDATE" or "UPDATE.PBP"? cause if i name it as "UPDATE.PBP" then it wil come out as "UPDATE.PBP.PBP"...thanks a lot..
|
|
charlywho
Newbie
|
7. April 2007 @ 08:57 |
Link to this message
|
|
I am using 3.03C and I just installed the Ratchet & Clank Size Matters ISO and got black screened. After reading around, someone mention that the cpu speed should be set to 266 in recovery mode. After finally figuring out out to get into recovery mode, I found that the cpu speed was already at 266, so I changed it to 333 AND the game worked. My question is this - what should the speed actually be for this (any) game and is the PSP reliabilty at risk when changing the speed up (or down)?
|
|
kingsizes
Junior Member
|
7. April 2007 @ 10:33 |
Link to this message
|
Originally posted by hexitnow:
Well as with anything that messes with flash, It's your own fault if something happens. I am not responsible. I have tested this on more then one psp and it worked on all of them.
Download it here
this is the auto installer from to 303oe-c
tried this but psp still show 3.03oe-a???
This message has been edited since posting. Last time this message was edited on 7. April 2007 @ 10:54
|
|
outspaced
Newbie
|
7. April 2007 @ 12:08 |
Link to this message
|
|
Thank you hexitnow, 3.10 OE-A winstaller worked perfectly on my japanese PSP-1000, motherboard IC6001.
Good work!
|
|
juan2320
Senior Member
|
7. April 2007 @ 19:01 |
Link to this message
|
harv4206 it's an improved version.(use the new one)
Seroth you need to have a 1.5 psp so you can do this.
Go here http://www.psp-haxors.com/forums/showthr...=10001#pid10001
botoys23 did you look at my last post here?
The GAME150 does not go in the GAME folder.(look at my last post)
the recovery goes in the GAME.(and name the eboot UPDATE)
charlywho the cpu speed is 222 for the psp.(333 will use more battery) that is ok with your psp.
kingsizes this is the auto installer from to 303oe-c so it will not flash.(but it only puts the files you need in your psp)
Did you run the flasher app in your psp after?
(some ppl will need to move the folders from GAME to GAME150)
..._...|..____________________, ,
....../ `---_juan2320__----_____|] = = = D
...../_==o;;;;;;;;_______.:/
.....), ---.(_(__) /
....// (..) ), ----"
|
Newbie
|
8. April 2007 @ 00:32 |
Link to this message
|
Originally posted by juan2320:
AKqZ No there are games that need a UMD game.(that is why more games work with No UMD mode off)
Is that means to play GTA_VCS_USA_PSP.iso I must turn off No UMD Mode & put an UMD in my PSP?
1st PSP = 1.51 > 2.6 > 3.11(waiting for downgrader)
2nd PSP = 1.50 > 3.03oe-c(planing to 3.10eo-a)
Fav. ISOs = Taiko 1 & 2, GripShift, R&C-SM
|
|
aszbaz
Suspended permanently
|
8. April 2007 @ 10:02 |
Link to this message
|
|
Will this program work with a TA-082 Motherboard?
|
|
Seroth
Suspended due to non-functional email address
|
8. April 2007 @ 14:39 |
Link to this message
|
|
ok, my current problem is this one:
I've tried several downgrades, none of them work.
I've tried several upgrades in order to try other downgrade programs, but to no avail.
I install the downgrade files on my psp root directory as instructed by a readme or as done by some of the easy downgraders out there. They usually require you to open a file in the photo directory (the other downgrader where you need an unpatched GTA VCS is not an option for me, don't have it, can't rent it anywhere, don't know anyone who does have it).
I go into the photo directory, try to boot up the xloader file, some of the time it says the data is corrupted, and when I do manage to make it 'TRY' opening it, my psp freezes, then crashes. After a reboot, my firmware is still the same version, and the eboot still won't run.
Any idea how this is possible? I thought downgrading was a fairly simple process (okay, there is the possibillity to brick your psp, but with all the guides I've recently found, just following the simple instructions should do)...but I just can't get it to happen?
|
Senior Member
|
9. April 2007 @ 16:44 |
Link to this message
|
|
you need to tell us what version ur on
|
|
Seroth
Suspended due to non-functional email address
|
10. April 2007 @ 00:20 |
Link to this message
|
|
currently on FW version 2.80
I've tried downgrading from 2.60, but none of them worked as of yet. The 2.60 didn't work because I don't have an unpatched GTA, and the 2,71 and 2,80 downgraders both give me exact the same problem on multiple installs, multiple easy downgrader versions, and after a whole bunch of reboots and retries.
|
|
juan2320
Senior Member
|
10. April 2007 @ 13:29 |
Link to this message
|
AKqZ yes put a UMD game in the drive.(it's better like that)
aszbaz yes it work with a TA-082 Motherboard.(if you have a 1.5 psp it will work)
Seroth this is not a downgrading thread.
Go here to Downgrade Every PSP Firmware 3.03 & Below http://www.psp-haxors.com/forums/showthr...=10001#pid10001
If you have a 2.80 FW the 2.60 and 2.71 downgrader will not work.(you can only use 2.80 and 3.03 downgrader)
..._...|..____________________, ,
....../ `---_juan2320__----_____|] = = = D
...../_==o;;;;;;;;_______.:/
.....), ---.(_(__) /
....// (..) ), ----"
|
Junior Member
|
10. April 2007 @ 16:32 |
Link to this message
|
|
hex, i owe you a shot of whiskey bud!
|
|
chinilogy
Newbie
|
11. April 2007 @ 04:56 |
Link to this message
|
|
hi all.. jus wondering where is the winstaller for 3.10oe-a2 or there isn't?? can't find them . or it's packed all together with 3.10oe-a??
|
|
Advertisement
|
|
|
Senior Member
|
11. April 2007 @ 05:23 |
Link to this message
|
Originally posted by chinilogy:
hi all.. jus wondering where is the winstaller for 3.10oe-a2 or there isn't?? can't find them . or it's packed all together with 3.10oe-a??
no A' winstaller yet...that one is still being done manualy....
|
