|
|
|
Recurrent Shrink Burn Issues
|
|
|
miles7
Newbie
|
19. April 2007 @ 13:52 |
Link to this message
|
I've been using DVD Shrink for a long time, have the newest version.
Lately any disc I watch that I've burned works fine until you get later on in the movie, or further on in the episodes on the disc. Once you get to that point the disc starts messing up. This happens on everything I've been burning.
What's the problem?
Do I need to reinstall shrink? Or is it my burner? I've had the lens cleaned...
Please let me know any ideas you may have.
|
|
Advertisement
|
 |
|
|
Moderator
1 product review
|
19. April 2007 @ 15:01 |
Link to this message
|
What brand discs are you using? Those sypmtoms are typical of cheap media. Could also be from high levels of compression, are you using Advanced Analysis and AEC controls in DVD Shrink?
|
|
miles7
Newbie
|
20. April 2007 @ 15:45 |
Link to this message
|
|
I've been using Philips Media DVD+R's. As far as the settings question you asked I'm really not sure. I haven't changed any of the settings that came as default.
Any ideas?
|
|
timedout
Suspended due to non-functional email address
|
20. April 2007 @ 16:10 |
Link to this message
|
I am having the same problem.
However I am using AnyDVD and CloneDVD 2.
I have sony media (I did buy them on sale 100disc for 29.99)
but some movies work all the way through, most don't.
|
|
timedout
Suspended due to non-functional email address
|
20. April 2007 @ 16:27 |
Link to this message
|
very confused....
used AnyDVD on all movies
used same sony media on all
backed up Smokin Aces with clonedvd2 : No problems all the way through
backed up Freedom Writers with clonedvd2: locks up and glitches about 3/4 of the way through.
backed up Freedom Writers with 123 copy dvd: no problems
the problem started when the trial period for CloneDVD ended.
If the software was cracked could that cause a problem?
What else could it be?
|
Senior Member
|
20. April 2007 @ 17:24 |
Link to this message
|
Originally posted by miles7:
I've been using Philips Media DVD+R's
What burning program are you using?
What speed are you burning at?
DL this program http://www.afterdawn.com/software/video_..._identifier.cfm
and see who the manufacturer is and the MID code
post that info
@timedout
what speed are you burning at?
burn half of the top rated speed of the media
"When I look at the smiles on all the childrens faces, I just know theyre about to jab me with something."- Homer Simpson |
|
miles7
Newbie
|
20. April 2007 @ 20:00 |
Link to this message
|
I'm using Nero for burning. It's worked 100 percent perfect prior to this spell of bad discs and I haven't changed any of the settings. The glitches occur like I said 3/4ths of the way into the disc. It simply will jump ahead in the scene for ten seconds. Strangely enough it is always a ten second jump, exactly.
It's weird. I really don't get it.
|
Senior Member
|
21. April 2007 @ 07:39 |
Link to this message
|
|
post a burn log, and we will see what we can find
get it here
C:/programs/nero7/nero/core
look for the nerohistory.txt file
dont forget to edit your serial number out
"When I look at the smiles on all the childrens faces, I just know theyre about to jab me with something."- Homer Simpson
|
|
PacMan777
AfterDawn Addict
|
21. April 2007 @ 14:22 |
Link to this message
|
timedout
Quote:
the problem started when the trial period for CloneDVD ended.
If the software was cracked could that cause a problem?
Lets see... trial version works, illegal cracked version has errors; trial version works, illegal cracked version has errors. Guess what? I bet the crack might be the problem. If you like the program, buy it. Remove the crack and make sure the folder and remnants are gone before installing the retail version.
|
|
PacMan777
AfterDawn Addict
|
21. April 2007 @ 14:31 |
Link to this message
|
Originally posted by miles7:
I'm using Nero for burning. It's worked 100 percent perfect prior to this spell of bad discs and I haven't changed any of the settings. The glitches occur like I said 3/4ths of the way into the disc. It simply will jump ahead in the scene for ten seconds. Strangely enough it is always a ten second jump, exactly.
It's weird. I really don't get it.
Bowler is right, we need to see a Nero log. If you don't have one, do another burn and save the log to post here.
Another thought is the media. I've not seen where you did the ID suggested by Bowler with the DVD Identifier. The Nero log may show us what we need to see on media ID, but it doesn't always. We need those posts to be able to better help you.
You mentioned problem batch of media. You may have diagnosed your own problem. If you started having these problems with this particular batch of media, I'd suggest getting a small batch of another brand (that's usually good quality). I suggest Sony +R (not -R), Verbatim, and most name brands with made in Japan on the label. See if the media makes a difference. Plus it's not a waste since you'll be using the media, you're just adding to your stock.
|
Member
|
21. April 2007 @ 20:01 |
Link to this message
|
|
This is the weirdest thing...
I have been backing up all my movies at 4x no prblems using decrypter to burn and never had any problems till recently
but my problem isnt with my dvd media im still using the same cheapie disc from Jerkit City.
My dvd will skip on every movie even older burns form a year ago
i've come to find out that the problem is caused by my dvd player
it skips the same amount every time. i have to tarck back beyond the skip point and everythign is back to normal plays like it never happened/
it also does this everytime with my original copies!
|
Senior Member
|
21. April 2007 @ 21:36 |
Link to this message
|
|
@Co45,
have you tried a lens cleaner for your dvd player?
"When I look at the smiles on all the childrens faces, I just know theyre about to jab me with something."- Homer Simpson
|
|
PacMan777
AfterDawn Addict
|
22. April 2007 @ 01:35 |
Link to this message
|
Originally posted by Co45:
This is the weirdest thing...
I have been backing up all my movies at 4x no prblems using decrypter to burn and never had any problems till recently
but my problem isnt with my dvd media im still using the same cheapie disc from Jerkit City.
My dvd will skip on every movie even older burns form a year ago
i've come to find out that the problem is caused by my dvd player
it skips the same amount every time. i have to tarck back beyond the skip point and everythign is back to normal plays like it never happened/
it also does this everytime with my original copies!
Barring cleaning the lens or a firmware update, you're looking at a new player. I'm surprised you haven't purchased one sooner. They're relatively inexpensive nowadays. As for the jerkit media, you're luckier than a lot of members whose burners are pickier and different media was their solution.
|
Member
|
22. April 2007 @ 05:34 |
Link to this message
|
|
Yeah the dvd player i bought originally was only 30$
so its really no biggie to go and buy another one.
I just thought it was funny ive never heard of a dvd player acting the way mine does!
I hate to trash it though because it has played every disc i've ever put into it including disc's that didnt finish burning!
This message has been edited since posting. Last time this message was edited on 22. April 2007 @ 05:47
|
|
PacMan777
AfterDawn Addict
|
23. April 2007 @ 14:34 |
Link to this message
|
Quote:
I hate to trash it though because it has played every disc i've ever put into it including disc's that didnt finish burning!
Has played, but no longer playing is the issue. With it acting up with factory DVDs as well as the recordable, that means it's no longer any good for playing any movies without problems. If it would still play factory DVDs it would be worth keeping, but from what you say it doesn't even do that. At $30 it's definitely a disposable model.
Take a look at the multi format Philips players. The one I got has been a quality player and at 60 to 70 dollars the price isn't too bad.
This message has been edited since posting. Last time this message was edited on 23. April 2007 @ 14:36
|
|
miles7
Newbie
|
23. April 2007 @ 14:57 |
Link to this message
|
|
Just wanted to thank you guys for absolutely everything. I'm going to try all of your suggestions and post a burn log as soon as I get home from being out of state. I'll write what I find soon.
|
Member
|
23. April 2007 @ 16:26 |
Link to this message
|
|
thanks ..
Thats probably the reason i didnt go get another one, I didnt want to buy one that didnt play everything like im used to. Well was used to.
Ill have to check the phillips out thanks PacMan777
|
|
PacMan777
AfterDawn Addict
|
24. April 2007 @ 00:12 |
Link to this message
|
|
You're welcome. Last time I noticed Wal Mart still carried them. They're likely not the only outlet though.
|
|
miles7
Newbie
|
25. April 2007 @ 14:40 |
Link to this message
|
Okay,
I apologize thoroughly for the length of this post but I did not know how to post my burnlog otherwise. Anyway, here is the log you all requested. Thank you so much for taking the time and care to help me.
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 12:03:20 PM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero API version: 7.2.3.2
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\Nero - Burning Rom
Internal Version: 7, 2, 3, 2
Recorder: <LITE-ON DVD+RW SOHW-802S>Version: UPP6 - HA 1 TA 0 - 7.2.3.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
CdRomPeripheral : LITE-ON DVD+RW SOHW-802S atapi Port 2 ID 0 DMA: On
CdRomPeripheral : ASUS CD-S480/AH atapi Port 2 ID 1 DMA: Off
DiskPeripheral : SAMSUNG SP1604N atapi Port 3 ID 0 DMA: On
=== CDRom-Device-Map ===
LITE-ON DVD+RW SOHW-802S E: CDRom0
ASUS CD-S480/AH F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 66060288 (0) Byte
BUFE : 0
Physical memory : 447MB (458224kB)
Free physical memory: 10MB (11084kB)
Memory in use : 97
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
6.4.2007
NeroAPI
2:46:27 AM #1 Phase 112 File APIProgress.cpp, Line 278
DVD-Video files reallocation started
2:46:27 AM #2 Phase 114 File APIProgress.cpp, Line 278
DVD-Video files reallocation completed (no file modified)
2:46:27 AM #3 Phase 111 File APIProgress.cpp, Line 278
DVD-Video files sorted
2:46:27 AM #4 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory
2:46:27 AM #5 Text 0 File Reader.cpp, Line 124
Reader running
2:46:27 AM #6 Text 0 File Writer.cpp, Line 113
Writer E: LITE-ON DVD+RW SOHW-802S running
2:46:27 AM #7 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
2:46:27 AM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
2:46:27 AM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
2:46:28 AM #10 Text 0 File Burncd.cpp, Line 3400
Turn on Disc-At-Once, using DVD media
2:47:50 AM #11 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286127 (508:01.52, 4465MB)
2:47:50 AM #12 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO
2:47:50 AM #13 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: LITE-ON DVD+RW SOHW-802S, Media type: DVD+R
2:47:50 AM #14 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD R/RW.)
2:47:50 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [E: LITE-ON DVD+RW SOHW-802S]
--------------------------------------------------------------
2:47:50 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: LITE-ON DVD+RW SOHW-802S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286128 | lead-out | 1 | 0x41 | 0x00
2:47:50 AM #17 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
2:47:50 AM #18 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
2:47:50 AM #19 Phase 24 File APIProgress.cpp, Line 278
Caching of files started
2:47:50 AM #20 Text 0 File Burncd.cpp, Line 4231
Cache writing successful.
2:47:50 AM #21 Phase 25 File APIProgress.cpp, Line 278
Caching of files completed
2:47:50 AM #22 Phase 36 File APIProgress.cpp, Line 278
Burn process started at 2.4x (3,324 KB/s)
2:47:51 AM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
2:47:51 AM #24 SPTI -1066 File SCSIPassThrough.cpp, Line 291
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
Buffer x09409800: Len x804
2:47:51 AM #25 Text 0 File DVDPlusRW.cpp, Line 650
Start write address at LBA 0
DVD high compatibility mode: Yes
3:14:39 AM #26 Text 0 File WriterStatus.cpp, Line 116
<E: LITE-ON DVD+RW SOHW-802S> start writing Lead-Out at LBA 2286128 (22E230h), length 0 blocks
3:14:39 AM #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
3:15:10 AM #28 Phase 37 File APIProgress.cpp, Line 278
Burn process completed successfully at 2.4x (3,324 KB/s)
3:15:13 AM #29 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
3:15:13 AM #30 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 7/17/2002 11:05:10 AM
File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 11/3/2005 3:00:00 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** NeroAPI, History File *** ======
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 12:03:20 PM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero API version: 7.2.3.2
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\Nero - Burning Rom
Internal Version: 7, 2, 3, 2
Recorder: <LITE-ON DVD+RW SOHW-802S>Version: UPP6 - HA 1 TA 0 - 7.2.3.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
CdRomPeripheral : LITE-ON DVD+RW SOHW-802S atapi Port 2 ID 0 DMA: On
CdRomPeripheral : ASUS CD-S480/AH atapi Port 2 ID 1 DMA: Off
DiskPeripheral : SAMSUNG SP1604N atapi Port 3 ID 0 DMA: On
=== CDRom-Device-Map ===
LITE-ON DVD+RW SOHW-802S E: CDRom0
ASUS CD-S480/AH F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 66060288 (0) Byte
BUFE : 0
Physical memory : 447MB (458224kB)
Free physical memory: 55MB (56368kB)
Memory in use : 87
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
6.4.2007
NeroAPI
4:48:48 AM #1 Phase 112 File APIProgress.cpp, Line 278
DVD-Video files reallocation started
4:48:48 AM #2 Phase 114 File APIProgress.cpp, Line 278
DVD-Video files reallocation completed (no file modified)
4:48:48 AM #3 Phase 111 File APIProgress.cpp, Line 278
DVD-Video files sorted
4:48:48 AM #4 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory
4:48:49 AM #5 Text 0 File Reader.cpp, Line 124
Reader running
4:48:49 AM #6 Text 0 File Writer.cpp, Line 113
Writer E: LITE-ON DVD+RW SOHW-802S running
4:48:49 AM #7 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
4:48:49 AM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
4:48:49 AM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
4:48:49 AM #10 Text 0 File Burncd.cpp, Line 3400
Turn on Disc-At-Once, using DVD media
4:49:23 AM #11 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286143 (508:01.68, 4465MB)
4:49:23 AM #12 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO
4:49:23 AM #13 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: LITE-ON DVD+RW SOHW-802S, Media type: DVD+R
4:49:23 AM #14 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD R/RW.)
4:49:23 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286144 (2286144) = #2286144/508:1.69
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286144 blocks [E: LITE-ON DVD+RW SOHW-802S]
--------------------------------------------------------------
4:49:23 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: LITE-ON DVD+RW SOHW-802S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682022912, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286144 | lead-out | 1 | 0x41 | 0x00
4:49:23 AM #17 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
4:49:23 AM #18 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
4:49:23 AM #19 Phase 24 File APIProgress.cpp, Line 278
Caching of files started
4:49:23 AM #20 Text 0 File Burncd.cpp, Line 4231
Cache writing successful.
4:49:23 AM #21 Phase 25 File APIProgress.cpp, Line 278
Caching of files completed
4:49:23 AM #22 Phase 36 File APIProgress.cpp, Line 278
Burn process started at 2.4x (3,324 KB/s)
4:49:23 AM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
4:49:23 AM #24 SPTI -1066 File SCSIPassThrough.cpp, Line 291
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
Buffer x09397200: Len x804
4:49:23 AM #25 Text 0 File DVDPlusRW.cpp, Line 650
Start write address at LBA 0
DVD high compatibility mode: Yes
5:13:47 AM #26 Text 0 File WriterStatus.cpp, Line 116
<E: LITE-ON DVD+RW SOHW-802S> start writing Lead-Out at LBA 2286144 (22E240h), length 0 blocks
5:13:47 AM #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
5:14:16 AM #28 Phase 37 File APIProgress.cpp, Line 278
Burn process completed successfully at 2.4x (3,324 KB/s)
5:14:17 AM #29 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
5:14:17 AM #30 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 7/17/2002 11:05:10 AM
File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 11/3/2005 3:00:00 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** NeroAPI, History File *** ======
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 12:03:20 PM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero API version: 7.2.3.2
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\Nero - Burning Rom
Internal Version: 7, 2, 3, 2
Recorder: <LITE-ON DVD+RW SOHW-802S>Version: UPP6 - HA 1 TA 0 - 7.2.3.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
CdRomPeripheral : LITE-ON DVD+RW SOHW-802S atapi Port 2 ID 0 DMA: On
CdRomPeripheral : ASUS CD-S480/AH atapi Port 2 ID 1 DMA: Off
DiskPeripheral : SAMSUNG SP1604N atapi Port 3 ID 0 DMA: On
=== CDRom-Device-Map ===
LITE-ON DVD+RW SOHW-802S E: CDRom0
ASUS CD-S480/AH F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 66060288 (0) Byte
BUFE : 0
Physical memory : 447MB (458224kB)
Free physical memory: 31MB (32584kB)
Memory in use : 92
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
6.4.2007
NeroAPI
6:27:59 PM #1 Phase 112 File APIProgress.cpp, Line 278
DVD-Video files reallocation started
6:27:59 PM #2 Phase 114 File APIProgress.cpp, Line 278
DVD-Video files reallocation completed (no file modified)
6:27:59 PM #3 Phase 111 File APIProgress.cpp, Line 278
DVD-Video files sorted
6:28:00 PM #4 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory
6:28:00 PM #5 Text 0 File Reader.cpp, Line 124
Reader running
6:28:00 PM #6 Text 0 File Writer.cpp, Line 113
Writer E: LITE-ON DVD+RW SOHW-802S running
6:28:00 PM #7 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
6:28:00 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
6:28:00 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
6:28:00 PM #10 Text 0 File Burncd.cpp, Line 3400
Turn on Disc-At-Once, using DVD media
6:28:32 PM #11 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286127 (508:01.52, 4465MB)
6:28:32 PM #12 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO
6:28:32 PM #13 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: LITE-ON DVD+RW SOHW-802S, Media type: DVD+R
6:28:32 PM #14 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD R/RW.)
6:28:32 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [E: LITE-ON DVD+RW SOHW-802S]
--------------------------------------------------------------
6:28:32 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: LITE-ON DVD+RW SOHW-802S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286128 | lead-out | 1 | 0x41 | 0x00
6:28:32 PM #17 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
6:28:32 PM #18 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
6:28:32 PM #19 Phase 24 File APIProgress.cpp, Line 278
Caching of files started
6:28:32 PM #20 Text 0 File Burncd.cpp, Line 4231
Cache writing successful.
6:28:32 PM #21 Phase 25 File APIProgress.cpp, Line 278
Caching of files completed
6:28:32 PM #22 Phase 36 File APIProgress.cpp, Line 278
Burn process started at 2.4x (3,324 KB/s)
6:28:32 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
6:28:32 PM #24 SPTI -1066 File SCSIPassThrough.cpp, Line 291
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
Buffer x09afb400: Len x804
6:28:32 PM #25 Text 0 File DVDPlusRW.cpp, Line 650
Start write address at LBA 0
DVD high compatibility mode: Yes
6:43:27 PM #26 SPTI -1033 File SCSIPassThrough.cpp, Line 291
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1033)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x01
CDB Data: 0x2A 00 00 14 EB C0 00 00 20 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 01
Buffer x01000000: Len x10000
0x00 00 01 BA 44 30 26 B8 76 4F 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 E5 DB 35 D4 6C B0 86 DF 0C
0x00 42 46 20 BA 6C 3E 37 D3 7B FE 20 C0 16 37 20
6:43:27 PM #27 CDR -1033 File Writer.cpp, Line 302
Drive not ready
E: LITE-ON DVD+RW SOHW-802S
6:43:27 PM #28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
6:43:28 PM #29 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
6:43:29 PM #30 SPTI -1033 File SCSIPassThrough.cpp, Line 291
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1033)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x01
CDB Data: 0x35 02 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 01
6:43:29 PM #31 SPTI -1033 File SCSIPassThrough.cpp, Line 291
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1033)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x01
CDB Data: 0x5B 01 06 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 01
6:43:36 PM #32 CDR -1033 File WriterStatus.cpp, Line 167
Drive not ready
E: LITE-ON DVD+RW SOHW-802S
6:43:36 PM #33 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
6:43:36 PM #34 Phase 38 File APIProgress.cpp, Line 278
Burn process failed at 2.4x (3,324 KB/s)
6:43:36 PM #35 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
6:43:36 PM #36 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 7/17/2002 11:05:10 AM
File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 11/3/2005 3:00:00 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** NeroAPI, History File *** ======
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 12:03:20 PM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero API version: 7.2.3.2
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\Nero - Burning Rom
Internal Version: 7, 2, 3, 2
Recorder: <LITE-ON DVD+RW SOHW-802S>Version: UPP6 - HA 1 TA 0 - 7.2.3.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
CdRomPeripheral : LITE-ON DVD+RW SOHW-802S atapi Port 2 ID 0 DMA: On
CdRomPeripheral : ASUS CD-S480/AH atapi Port 2 ID 1 DMA: Off
DiskPeripheral : SAMSUNG SP1604N atapi Port 3 ID 0 DMA: On
=== CDRom-Device-Map ===
LITE-ON DVD+RW SOHW-802S E: CDRom0
ASUS CD-S480/AH F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 66060288 (0) Byte
BUFE : 0
Physical memory : 447MB (458224kB)
Free physical memory: 9MB (9908kB)
Memory in use : 97
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
6.4.2007
NeroAPI
7:22:10 PM #1 Phase 112 File APIProgress.cpp, Line 278
DVD-Video files reallocation started
7:22:10 PM #2 Phase 114 File APIProgress.cpp, Line 278
DVD-Video files reallocation completed (no file modified)
7:22:10 PM #3 Phase 111 File APIProgress.cpp, Line 278
DVD-Video files sorted
7:22:11 PM #4 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory
7:22:11 PM #5 Text 0 File Reader.cpp, Line 124
Reader running
7:22:11 PM #6 Text 0 File Writer.cpp, Line 113
Writer E: LITE-ON DVD+RW SOHW-802S running
7:22:11 PM #7 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
7:22:11 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
7:22:11 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
7:22:11 PM #10 Text 0 File Burncd.cpp, Line 3400
Turn on Disc-At-Once, using DVD media
7:22:44 PM #11 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286127 (508:01.52, 4465MB)
7:22:44 PM #12 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO
7:22:44 PM #13 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: LITE-ON DVD+RW SOHW-802S, Media type: DVD+R
7:22:44 PM #14 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD R/RW.)
7:22:44 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [E: LITE-ON DVD+RW SOHW-802S]
--------------------------------------------------------------
7:22:44 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: LITE-ON DVD+RW SOHW-802S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286128 | lead-out | 1 | 0x41 | 0x00
7:22:44 PM #17 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
7:22:44 PM #18 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
7:22:44 PM #19 Phase 24 File APIProgress.cpp, Line 278
Caching of files started
7:22:45 PM #20 Text 0 File Burncd.cpp, Line 4231
Cache writing successful.
7:22:45 PM #21 Phase 25 File APIProgress.cpp, Line 278
Caching of files completed
7:22:45 PM #22 Phase 36 File APIProgress.cpp, Line 278
Burn process started at 2.4x (3,324 KB/s)
7:22:45 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
7:22:45 PM #24 SPTI -1066 File SCSIPassThrough.cpp, Line 291
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
Buffer x09009800: Len x804
7:22:45 PM #25 Text 0 File DVDPlusRW.cpp, Line 650
Start write address at LBA 0
DVD high compatibility mode: Yes
7:51:54 PM #26 Text 0 File WriterStatus.cpp, Line 116
<E: LITE-ON DVD+RW SOHW-802S> start writing Lead-Out at LBA 2286128 (22E230h), length 0 blocks
7:51:54 PM #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
7:52:24 PM #28 Phase 37 File APIProgress.cpp, Line 278
Burn process completed successfully at 2.4x (3,324 KB/s)
7:52:25 PM #29 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
7:52:25 PM #30 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 7/17/2002 11:05:10 AM
File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 11/3/2005 3:00:00 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** NeroAPI, History File *** ======
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 12:03:20 PM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero API version: 7.2.3.2
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\Nero - Burning Rom
Internal Version: 7, 2, 3, 2
Recorder: <LITE-ON DVD+RW SOHW-802S>Version: UPP6 - HA 1 TA 0 - 7.2.3.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
CdRomPeripheral : LITE-ON DVD+RW SOHW-802S atapi Port 2 ID 0 DMA: On
CdRomPeripheral : ASUS CD-S480/AH atapi Port 2 ID 1 DMA: Off
DiskPeripheral : SAMSUNG SP1604N atapi Port 3 ID 0 DMA: On
=== CDRom-Device-Map ===
LITE-ON DVD+RW SOHW-802S E: CDRom0
ASUS CD-S480/AH F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 66060288 (0) Byte
BUFE : 0
Physical memory : 447MB (458224kB)
Free physical memory: 29MB (30064kB)
Memory in use : 93
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
8.4.2007
NeroAPI
5:03:10 PM #1 Phase 112 File APIProgress.cpp, Line 278
DVD-Video files reallocation started
5:03:10 PM #2 Phase 114 File APIProgress.cpp, Line 278
DVD-Video files reallocation completed (no file modified)
5:03:10 PM #3 Phase 111 File APIProgress.cpp, Line 278
DVD-Video files sorted
5:03:11 PM #4 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory
5:03:11 PM #5 Text 0 File Reader.cpp, Line 124
Reader running
5:03:11 PM #6 Text 0 File Writer.cpp, Line 113
Writer E: LITE-ON DVD+RW SOHW-802S running
5:03:11 PM #7 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
5:03:11 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
5:03:11 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
5:03:11 PM #10 Text 0 File Burncd.cpp, Line 3400
Turn on Disc-At-Once, using DVD media
5:05:16 PM #11 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286127 (508:01.52, 4465MB)
5:05:16 PM #12 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO
5:05:16 PM #13 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: LITE-ON DVD+RW SOHW-802S, Media type: DVD+R
5:05:16 PM #14 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD R/RW.)
5:05:16 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [E: LITE-ON DVD+RW SOHW-802S]
--------------------------------------------------------------
5:05:16 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: LITE-ON DVD+RW SOHW-802S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286128 | lead-out | 1 | 0x41 | 0x00
5:05:16 PM #17 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
5:05:16 PM #18 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
5:05:16 PM #19 Phase 24 File APIProgress.cpp, Line 278
Caching of files started
5:05:16 PM #20 Text 0 File Burncd.cpp, Line 4231
Cache writing successful.
5:05:16 PM #21 Phase 25 File APIProgress.cpp, Line 278
Caching of files completed
5:05:16 PM #22 Phase 36 File APIProgress.cpp, Line 278
Burn process started at 2.4x (3,324 KB/s)
5:05:16 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
5:05:16 PM #24 SPTI -1066 File SCSIPassThrough.cpp, Line 291
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
Buffer x0999b400: Len x804
5:05:16 PM #25 Text 0 File DVDPlusRW.cpp, Line 650
Start write address at LBA 0
DVD high compatibility mode: Yes
5:30:20 PM #26 Text 0 File WriterStatus.cpp, Line 116
<E: LITE-ON DVD+RW SOHW-802S> start writing Lead-Out at LBA 2286128 (22E230h), length 0 blocks
5:30:20 PM #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
5:31:06 PM #28 Phase 37 File APIProgress.cpp, Line 278
Burn process completed successfully at 2.4x (3,324 KB/s)
5:31:08 PM #29 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
5:31:08 PM #30 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 7/17/2002 11:05:10 AM
File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 11/3/2005 3:00:00 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** NeroAPI, History File *** ======
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 12:03:20 PM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero API version: 7.2.3.2
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\Nero - Burning Rom
Internal Version: 7, 2, 3, 2
Recorder: <LITE-ON DVD+RW SOHW-802S>Version: UPP6 - HA 1 TA 0 - 7.2.3.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
CdRomPeripheral : LITE-ON DVD+RW SOHW-802S atapi Port 2 ID 0 DMA: On
CdRomPeripheral : ASUS CD-S480/AH atapi Port 2 ID 1 DMA: Off
DiskPeripheral : SAMSUNG SP1604N atapi Port 3 ID 0 DMA: On
=== CDRom-Device-Map ===
LITE-ON DVD+RW SOHW-802S E: CDRom0
ASUS CD-S480/AH F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 66060288 (0) Byte
BUFE : 0
Physical memory : 447MB (458224kB)
Free physical memory: 32MB (33464kB)
Memory in use : 92
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
8.4.2007
NeroAPI
5:52:33 PM #1 Phase 112 File APIProgress.cpp, Line 278
DVD-Video files reallocation started
5:52:33 PM #2 Phase 114 File APIProgress.cpp, Line 278
DVD-Video files reallocation completed (no file modified)
5:52:33 PM #3 Phase 111 File APIProgress.cpp, Line 278
DVD-Video files sorted
5:52:33 PM #4 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory
5:52:33 PM #5 Text 0 File Reader.cpp, Line 124
Reader running
5:52:33 PM #6 Text 0 File Writer.cpp, Line 113
Writer E: LITE-ON DVD+RW SOHW-802S running
5:52:33 PM #7 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
5:52:33 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
5:52:33 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
5:52:33 PM #10 Text 0 File Burncd.cpp, Line 3400
Turn on Disc-At-Once, using DVD media
5:53:07 PM #11 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286127 (508:01.52, 4465MB)
5:53:07 PM #12 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO
5:53:07 PM #13 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: LITE-ON DVD+RW SOHW-802S, Media type: DVD+R
5:53:07 PM #14 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD R/RW.)
5:53:07 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [E: LITE-ON DVD+RW SOHW-802S]
--------------------------------------------------------------
5:53:07 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: LITE-ON DVD+RW SOHW-802S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286128 | lead-out | 1 | 0x41 | 0x00
5:53:07 PM #17 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
5:53:07 PM #18 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
5:53:07 PM #19 Phase 24 File APIProgress.cpp, Line 278
Caching of files started
5:53:07 PM #20 Text 0 File Burncd.cpp, Line 4231
Cache writing successful.
5:53:07 PM #21 Phase 25 File APIProgress.cpp, Line 278
Caching of files completed
5:53:07 PM #22 Phase 36 File APIProgress.cpp, Line 278
Burn process started at 2.4x (3,324 KB/s)
5:53:07 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
5:53:07 PM #24 SPTI -1066 File SCSIPassThrough.cpp, Line 291
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
Buffer x0965b400: Len x804
5:53:07 PM #25 Text 0 File DVDPlusRW.cpp, Line 650
Start write address at LBA 0
DVD high compatibility mode: Yes
6:17:56 PM #26 Text 0 File WriterStatus.cpp, Line 116
<E: LITE-ON DVD+RW SOHW-802S> start writing Lead-Out at LBA 2286128 (22E230h), length 0 blocks
6:17:56 PM #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
6:18:26 PM #28 Phase 37 File APIProgress.cpp, Line 278
Burn process completed successfully at 2.4x (3,324 KB/s)
6:18:27 PM #29 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
6:18:27 PM #30 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 7/17/2002 11:05:10 AM
File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 11/3/2005 3:00:00 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** NeroAPI, History File *** ======
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 12:03:20 PM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero API version: 7.2.3.2
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\Nero - Burning Rom
Internal Version: 7, 2, 3, 2
Recorder: <LITE-ON DVD+RW SOHW-802S>Version: UPP6 - HA 1 TA 0 - 7.2.3.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
CdRomPeripheral : LITE-ON DVD+RW SOHW-802S atapi Port 2 ID 0 DMA: On
CdRomPeripheral : ASUS CD-S480/AH atapi Port 2 ID 1 DMA: Off
DiskPeripheral : SAMSUNG SP1604N atapi Port 3 ID 0 DMA: On
=== CDRom-Device-Map ===
LITE-ON DVD+RW SOHW-802S E: CDRom0
ASUS CD-S480/AH F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 66060288 (0) Byte
BUFE : 0
Physical memory : 447MB (458224kB)
Free physical memory: 52MB (54220kB)
Memory in use : 88
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
8.4.2007
NeroAPI
6:27:36 PM #1 Phase 112 File APIProgress.cpp, Line 278
DVD-Video files reallocation started
6:27:36 PM #2 Phase 114 File APIProgress.cpp, Line 278
DVD-Video files reallocation completed (no file modified)
6:27:36 PM #3 Phase 111 File APIProgress.cpp, Line 278
DVD-Video files sorted
6:27:36 PM #4 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory
6:27:36 PM #5 Text 0 File Reader.cpp, Line 124
Reader running
6:27:36 PM #6 Text 0 File Writer.cpp, Line 113
Writer E: LITE-ON DVD+RW SOHW-802S running
6:27:36 PM #7 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
6:27:36 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
6:27:36 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
6:27:36 PM #10 Text 0 File Burncd.cpp, Line 3400
Turn on Disc-At-Once, using DVD media
6:28:10 PM #11 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1567183 (348:15.58, 3060MB)
6:28:10 PM #12 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO
6:28:10 PM #13 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: LITE-ON DVD+RW SOHW-802S, Media type: DVD+R
6:28:10 PM #14 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD R/RW.)
6:28:10 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1567184 (1567184) = #1567184/348:15.59
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1567184 blocks [E: LITE-ON DVD+RW SOHW-802S]
--------------------------------------------------------------
6:28:10 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: LITE-ON DVD+RW SOHW-802S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3209592832, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1567184 | lead-out | 1 | 0x41 | 0x00
6:28:10 PM #17 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
6:28:10 PM #18 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
6:28:10 PM #19 Phase 24 File APIProgress.cpp, Line 278
Caching of files started
6:28:10 PM #20 Text 0 File Burncd.cpp, Line 4231
Cache writing successful.
6:28:10 PM #21 Phase 25 File APIProgress.cpp, Line 278
Caching of files completed
6:28:10 PM #22 Phase 36 File APIProgress.cpp, Line 278
Burn process started at 2.4x (3,324 KB/s)
6:28:10 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
6:28:10 PM #24 SPTI -1066 File SCSIPassThrough.cpp, Line 291
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
Buffer x09656400: Len x804
6:28:10 PM #25 Text 0 File DVDPlusRW.cpp, Line 650
Start write address at LBA 0
DVD high compatibility mode: Yes
6:45:09 PM #26 Text 0 File WriterStatus.cpp, Line 116
<E: LITE-ON DVD+RW SOHW-802S> start writing Lead-Out at LBA 1567184 (17E9D0h), length 0 blocks
6:45:09 PM #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
6:45:38 PM #28 Phase 37 File APIProgress.cpp, Line 278
Burn process completed successfully at 2.4x (3,324 KB/s)
6:45:39 PM #29 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
6:45:39 PM #30 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 7/17/2002 11:05:10 AM
File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 11/3/2005 3:00:00 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** NeroAPI, History File *** ======
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 12:03:20 PM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero API version: 7.2.3.2
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\Nero - Burning Rom
Internal Version: 7, 2, 3, 2
Recorder: <LITE-ON DVD+RW SOHW-802S>Version: UPP6 - HA 1 TA 0 - 7.2.3.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
CdRomPeripheral : LITE-ON DVD+RW SOHW-802S atapi Port 2 ID 0 DMA: On
CdRomPeripheral : ASUS CD-S480/AH atapi Port 2 ID 1 DMA: Off
DiskPeripheral : SAMSUNG SP1604N atapi Port 3 ID 0 DMA: On
=== CDRom-Device-Map ===
LITE-ON DVD+RW SOHW-802S E: CDRom0
ASUS CD-S480/AH F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 66060288 (0) Byte
BUFE : 0
Physical memory : 447MB (458224kB)
Free physical memory: 40MB (41716kB)
Memory in use : 90
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
11.4.2007
NeroAPI
6:41:10 PM #1 Phase 112 File APIProgress.cpp, Line 278
DVD-Video files reallocation started
6:41:10 PM #2 Phase 114 File APIProgress.cpp, Line 278
DVD-Video files reallocation completed (no file modified)
6:41:10 PM #3 Phase 111 File APIProgress.cpp, Line 278
DVD-Video files sorted
6:41:10 PM #4 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory
6:41:10 PM #5 Text 0 File Reader.cpp, Line 124
Reader running
6:41:10 PM #6 Text 0 File Writer.cpp, Line 113
Writer E: LITE-ON DVD+RW SOHW-802S running
6:41:10 PM #7 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
6:41:10 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
6:41:10 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
6:41:10 PM #10 Text 0 File Burncd.cpp, Line 3400
Turn on Disc-At-Once, using DVD media
6:52:43 PM #11 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286127 (508:01.52, 4465MB)
6:52:43 PM #12 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO
6:52:43 PM #13 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: LITE-ON DVD+RW SOHW-802S, Media type: DVD+R
6:52:43 PM #14 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD R/RW.)
6:52:43 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [E: LITE-ON DVD+RW SOHW-802S]
--------------------------------------------------------------
6:52:43 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: LITE-ON DVD+RW SOHW-802S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286128 | lead-out | 1 | 0x41 | 0x00
6:52:43 PM #17 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
6:52:43 PM #18 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
6:52:43 PM #19 Phase 24 File APIProgress.cpp, Line 278
Caching of files started
6:52:43 PM #20 Text 0 File Burncd.cpp, Line 4231
Cache writing successful.
6:52:43 PM #21 Phase 25 File APIProgress.cpp, Line 278
Caching of files completed
6:52:43 PM #22 Phase 36 File APIProgress.cpp, Line 278
Burn process started at 2.4x (3,324 KB/s)
6:52:44 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
6:52:44 PM #24 SPTI -1066 File SCSIPassThrough.cpp, Line 291
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
Buffer x0971da00: Len x804
6:52:44 PM #25 Text 0 File DVDPlusRW.cpp, Line 650
Start write address at LBA 0
DVD high compatibility mode: Yes
7:17:14 PM #26 Text 0 File WriterStatus.cpp, Line 116
<E: LITE-ON DVD+RW SOHW-802S> start writing Lead-Out at LBA 2286128 (22E230h), length 0 blocks
7:17:16 PM #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
7:17:46 PM #28 Phase 37 File APIProgress.cpp, Line 278
Burn process completed successfully at 2.4x (3,324 KB/s)
7:17:49 PM #29 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
7:17:49 PM #30 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 7/17/2002 11:05:10 AM
File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 11/3/2005 3:00:00 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** NeroAPI, History File *** ======
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 12:03:20 PM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero API version: 7.2.3.2
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\Nero - Burning Rom
Internal Version: 7, 2, 3, 2
Recorder: <LITE-ON DVD+RW SOHW-802S>Version: UPP6 - HA 1 TA 0 - 7.2.3.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
CdRomPeripheral : LITE-ON DVD+RW SOHW-802S atapi Port 2 ID 0 DMA: On
CdRomPeripheral : ASUS CD-S480/AH atapi Port 2 ID 1 DMA: Off
DiskPeripheral : SAMSUNG SP1604N atapi Port 3 ID 0 DMA: On
=== CDRom-Device-Map ===
LITE-ON DVD+RW SOHW-802S E: CDRom0
ASUS CD-S480/AH F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 66060288 (0) Byte
BUFE : 0
Physical memory : 447MB (458224kB)
Free physical memory: 31MB (32176kB)
Memory in use : 92
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
11.4.2007
NeroAPI
9:11:45 PM #1 Phase 112 File APIProgress.cpp, Line 278
DVD-Video files reallocation started
9:11:45 PM #2 Phase 114 File APIProgress.cpp, Line 278
DVD-Video files reallocation completed (no file modified)
9:11:45 PM #3 Phase 111 File APIProgress.cpp, Line 278
DVD-Video files sorted
9:11:45 PM #4 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory
9:11:45 PM #5 Text 0 File Reader.cpp, Line 124
Reader running
9:11:45 PM #6 Text 0 File Writer.cpp, Line 113
Writer E: LITE-ON DVD+RW SOHW-802S running
9:11:45 PM #7 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
9:11:45 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
9:11:45 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
9:11:45 PM #10 Text 0 File Burncd.cpp, Line 3400
Turn on Disc-At-Once, using DVD media
9:12:19 PM #11 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286095 (508:01.20, 4465MB)
9:12:19 PM #12 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO
9:12:19 PM #13 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: LITE-ON DVD+RW SOHW-802S, Media type: DVD+R
9:12:19 PM #14 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD R/RW.)
9:12:19 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286096 (2286096) = #2286096/508:1.21
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286096 blocks [E: LITE-ON DVD+RW SOHW-802S]
--------------------------------------------------------------
9:12:19 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: LITE-ON DVD+RW SOHW-802S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681924608, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286096 | lead-out | 1 | 0x41 | 0x00
9:12:19 PM #17 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
9:12:19 PM #18 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
9:12:19 PM #19 Phase 24 File APIProgress.cpp, Line 278
Caching of files started
9:12:19 PM #20 Text 0 File Burncd.cpp, Line 4231
Cache writing successful.
9:12:19 PM #21 Phase 25 File APIProgress.cpp, Line 278
Caching of files completed
9:12:19 PM #22 Phase 36 File APIProgress.cpp, Line 278
Burn process started at 2.4x (3,324 KB/s)
9:12:19 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
9:12:19 PM #24 SPTI -1066 File SCSIPassThrough.cpp, Line 291
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
Buffer x0946a400: Len x804
9:12:19 PM #25 Text 0 File DVDPlusRW.cpp, Line 650
Start write address at LBA 0
DVD high compatibility mode: Yes
9:37:25 PM #26 Text 0 File WriterStatus.cpp, Line 116
<E: LITE-ON DVD+RW SOHW-802S> start writing Lead-Out at LBA 2286096 (22E210h), length 0 blocks
9:37:26 PM #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
9:37:55 PM #28 Phase 37 File APIProgress.cpp, Line 278
Burn process completed successfully at 2.4x (3,324 KB/s)
9:37:56 PM #29 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
9:37:56 PM #30 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 7/17/2002 11:05:10 AM
File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 11/3/2005 3:00:00 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** NeroAPI, History File *** ======
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 12:03:20 PM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero API version: 7.2.3.2
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\Nero - Burning Rom
Internal Version: 7, 2, 3, 2
Recorder: <LITE-ON DVD+RW SOHW-802S>Version: UPP6 - HA 1 TA 0 - 7.2.3.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
CdRomPeripheral : LITE-ON DVD+RW SOHW-802S atapi Port 2 ID 0 DMA: On
CdRomPeripheral : ASUS CD-S480/AH atapi Port 2 ID 1 DMA: Off
DiskPeripheral : SAMSUNG SP1604N atapi Port 3 ID 0 DMA: On
=== CDRom-Device-Map ===
LITE-ON DVD+RW SOHW-802S E: CDRom0
ASUS CD-S480/AH F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 66060288 (0) Byte
BUFE : 0
Physical memory : 447MB (458224kB)
Free physical memory: 34MB (35788kB)
Memory in use : 92
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
11.4.2007
NeroAPI
9:57:19 PM #1 Phase 112 File APIProgress.cpp, Line 278
DVD-Video files reallocation started
9:57:19 PM #2 Phase 114 File APIProgress.cpp, Line 278
DVD-Video files reallocation completed (no file modified)
9:57:19 PM #3 Phase 111 File APIProgress.cpp, Line 278
DVD-Video files sorted
9:57:19 PM #4 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory
9:57:19 PM #5 Text 0 File Reader.cpp, Line 124
Reader running
9:57:19 PM #6 Text 0 File Writer.cpp, Line 113
Writer E: LITE-ON DVD+RW SOHW-802S running
9:57:19 PM #7 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
9:57:19 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
9:57:19 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
9:57:19 PM #10 Text 0 File Burncd.cpp, Line 3400
Turn on Disc-At-Once, using DVD media
9:58:55 PM #11 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286143 (508:01.68, 4465MB)
9:58:55 PM #12 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO
9:58:55 PM #13 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: LITE-ON DVD+RW SOHW-802S, Media type: DVD+R
9:58:55 PM #14 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD R/RW.)
Disc not writeable. Insert writeable disc.
(Medium in drive: DVD+R. Medium required by compilation: DVD R/RW.)
9:58:55 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286144 (2286144) = #2286144/508:1.69
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286144 blocks [E: LITE-ON DVD+RW SOHW-802S]
--------------------------------------------------------------
9:58:55 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: LITE-ON DVD+RW SOHW-802S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682022912, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286144 | lead-out | 1 | 0x41 | 0x00
9:58:55 PM #17 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
9:58:55 PM #18 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
9:58:55 PM #19 Phase 24 File APIProgress.cpp, Line 278
Caching of files started
9:58:55 PM #20 Text 0 File Burncd.cpp, Line 4231
Cache writing successful.
9:58:55 PM #21 Phase 25 File APIProgress.cpp, Line 278
Caching of files completed
9:58:55 PM #22 Phase 36 File APIProgress.cpp, Line 278
Burn process started at 2.4x (3,324 KB/s)
9:58:55 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
9:58:55 PM #24 SPTI -1066 File SCSIPassThrough.cpp, Line 291
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
Buffer x094a2400: Len x804
9:58:55 PM #25 Text 0 File DVDPlusRW.cpp, Line 650
Start write address at LBA 0
DVD high compatibility mode: Yes
10:23:27 PM #26 Text 0 File WriterStatus.cpp, Line 116
<E: LITE-ON DVD+RW SOHW-802S> start writing Lead-Out at LBA 2286144 (22E240h), length 0 blocks
10:23:27 PM #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
10:23:55 PM #28 Phase 37 File APIProgress.cpp, Line 278
Burn process completed successfully at 2.4x (3,324 KB/s)
10:23:56 PM #29 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
10:23:56 PM #30 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 7/17/2002 11:05:10 AM
File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 11/3/2005 3:00:00 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** NeroAPI, History File *** ======
This message has been edited since posting. Last time this message was edited on 25. April 2007 @ 14:47
|
Senior Member
|
25. April 2007 @ 14:58 |
Link to this message
|
Memory in use : 97
you are using all of your memory when burning(its very high in all your logs), not good
dont not have anything else running when burning that takes up memory
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286143 (508:01.68, 4465MB)
try changing the output size to 4350
Originally posted by 300bowler:
DL this program http://www.afterdawn.com/software/video_..._identifier.cfm
and see who the manufacturer is and the MID code
post that info
also get better media, like verbatims or taiyo yudens
"When I look at the smiles on all the childrens faces, I just know theyre about to jab me with something."- Homer Simpson
|
|
miles7
Newbie
|
25. April 2007 @ 15:25 |
Link to this message
|
Okay, I ran Dvd Identifier. Here's what it came up with:
----------------------------------------------------------------------------
Unique Disc Identifier : [DVD+R:CMC MAG-M01-000]
----------------------------------------------------------------------------
Disc & Book Type : [DVD+R] - [DVD-ROM]
Manufacturer Name : [CMC Magnetics Corp.]
Manufacturer ID : [CMC MAG]
Media Type ID : [M01]
Product Revision : [Not Specified]
Blank Disc Capacity : [2,295,104 Sectors = 4.70 GB (4.38 GiB)]
Recording Speeds : [1x-2.4x , 4x , 6x-8x , 6x-16x]
----------------------------------------------------------------------------
[ DVD Identifier V5.0.1 - http://DVD.Identifier.CDfreaks.com ]
----------------------------------------------------------------------------
|
Senior Member
|
25. April 2007 @ 15:49 |
Link to this message
|
Manufacturer ID : [CMC MAG]
CMC MAG considered to be one of the worst media out there for dvds
edit
http://forums.afterdawn.com/thread_view.cfm/262544
check this thread about CMC Mag disks
i cant find any firmware update so i would suggest getting better media like the ones i sugested earlier.
you can try IMGburn but i dont think nero's the problem, plus dont multi-task while burning, you are using way too much memory
"When I look at the smiles on all the childrens faces, I just know theyre about to jab me with something."- Homer Simpson
This message has been edited since posting. Last time this message was edited on 25. April 2007 @ 15:56
|
|
miles7
Newbie
|
25. April 2007 @ 15:57 |
Link to this message
|
|
Lol, fair enough. So you're thinking if I eliminate programs that are running during burning, change my output size and get some better media that it may fix my issues?
|
|
Advertisement
|
|
|
Senior Member
|
25. April 2007 @ 17:24 |
Link to this message
|
|
yes
"When I look at the smiles on all the childrens faces, I just know theyre about to jab me with something."- Homer Simpson
|
|
