|
Replay Lite
|
|
Please note that the forum rules have changed. Posting of new codes is no longer allowed. See this thread for more information.
|
|
twinklet
Inactive
|
13. August 2007 @ 07:55 |
Link to this message
|
|
Hi all!!!!
Im new to this so please bear with me!! And im a woman which is probably worse when it comes to this ha ha, I live in Dublin and I have got a Reply lite box which is working fine I have Setanta Golf but I dont have Setanta sports 1 2 or 3 am I meant to have them and if so I would be very grateful if you could let me know how to do it.
Thanks
Millie
|
|
Advertisement
|
|
|
|
|
darren66
Junior Member
|
13. August 2007 @ 08:11 |
Link to this message
|
Originally posted by gman496:
I'm sure you can go into "Manual Scan" & scan individual channels.
gman thx but when you go and try manual search you need to add the frequencies of the channel you are searching for etc
|
Member
|
13. August 2007 @ 11:25 |
Link to this message
|
|
Anyone know if the rf output is supposed to work on these> I can get a pic with the normal scart, but the rf out put (old fashioned aerial lead) - i cannot get a pic via that. The reason i want a pic via the rf output is that i have my existing system split through an aerial booster and into diff rooms, now this works normally when i have done with my sky or ntl box, so why not with this? Is it disabled, do you have to enable it and if so - how?
Thanks for looking
|
|
TheStig85
Junior Member
|
13. August 2007 @ 16:29 |
Link to this message
|
|
does anybody know what the story is with Setanta 2 mine is just constantly scrambled but the program listings in coming up in the EPG, does anyone have the same problem......
|
AfterDawn Addict
|
13. August 2007 @ 16:39 |
Link to this message
|
|
Right now Set SP 2 is showing a rugby game , I have a starvi*w and its ok on mine , sorry I dunno if there is a problem with Replay , What area/location are you in
|
|
techkid
Suspended due to non-functional email address
|
14. August 2007 @ 02:25 |
Link to this message
|
Hi, I have a replay lite box that got messed up. Im assuming its the:
OMEGA
STi5518BQC
DIS-VG10280
220XK VG
MLT 22 619
Im just wondering if anyone nows a site or place i can get the flash software for the chip. My friend messed up his box by cloning it off another cloned box. now the box doesn't even switch on. Im planning to force the software back on to the chip which should will make the box switch on. You can email me at productions.cr@hotmail.com
Thanks.
|
|
shark79
Newbie
|
14. August 2007 @ 05:16 |
Link to this message
|
Originally posted by TheStig85:
does anybody know what the story is with Setanta 2 mine is just constantly scrambled but the program listings in coming up in the EPG, does anyone have the same problem......
If you live in ireland setanta 2 is scrambled anytime they show GAA, otherwise the odd time they show aussie rules and football highlights from germany.
|
|
shark79
Newbie
|
14. August 2007 @ 05:20 |
Link to this message
|
Originally posted by twinklet:
Hi all!!!!
Im new to this so please bear with me!! And im a woman which is probably worse when it comes to this ha ha, I live in Dublin and I have got a Reply lite box which is working fine I have Setanta Golf but I dont have Setanta sports 1 2 or 3 am I meant to have them and if so I would be very grateful if you could let me know how to do it.
Thanks
Millie
Hi Mille.
you may have to do a rescan, you should have setanta 1 and 2 and the golf but no other setanta stations that im aware of, if you live in Ireland Setanta 2 is generally scrambled as this is to do with an issues rights of what sports it can show on that station but the odd occasion it will show aussie rules and the likes.
|
Senior Member
|
14. August 2007 @ 06:32 |
Link to this message
|
Hi techkid,
and anybody is has a frozen replay lite, the red led stays on.
The reason why this happens is unplugging the box before the flash is complete. When files are transferring from your PC to the Box you will see the led flashing red/green slowly....WAIT untill you see the led flashing much more quickly, this happens about a couple of minutes after all the blocks have been transferred.
Download the file from the link below. It's 742a file.
http://www.speedyshare.com/480850955.html
Flash the box. Remember UNTICK maintain user data.
Wait until all the blocks are transferred and WAIT a couple of more minutes for the led to flash much more rapidily than it did when you could visibly see when the blocks were transferring.
Unplug everything and only connect the power lead.
Wait for the led to flash red/green and then stay on green.
Then flash with 744
http://www.speedyshare.com/166633270.html
AND FLASH WITH 752 OR CLONE WITH SOMEONE WHO HAS 752 ALREADY IN THEIR BOX. Each of the files below contain Replay Lite Software version 7.52, the STB/PC interface (stb5.20) and full instructions tailored for either UK or Ireland.
UK 752 http://www.speedyshare.com/859117548.html
IRL 752 http://www.speedyshare.com/262600882.html
A Null Modem Cable is required which can be purchased for ?18. from Maplins Dublin city centre or if you can wait to have it delivered you can purchase online for a fraction of the cost plus postage. One example of where they can be purchased online is http://www.amazon.co.uk/StarTech-com-Nul...9/dp/B00006B8BJ
Flashing your Replay Lite Box
Before you start you must have the following:
click Stblink5.20 Client and UNTICK the maintain user data box.
select upgrade software,
upload the 744 file.
There are 515 blocks of information to be downloaded. Allow the link to download and write the information to your box. During this time you will see the LED light on the Replay Lite flashing red/green approx every second.
When all blocks are transferred, your pc will read all transferred.
WAIT for another 3-5 mins, the box will take a little more time to read the blocks, even though your pc has read all transferred. WHEN the led flash much more quickly than it did when the where being visibly transferred, the box is upgraded.
IMPORTANT
EXIT STB LINK AND THEN UNPLUG THE BOX AND NULL MODEM LEAD.
POWER UP THE BOX AGAIN. THE LED WILL FLASH RED/GREEN.
WAIT UNTIL THE LED STAYS ON GREEN.
THEN RECONNECT NULL MODEM LEAD AND UPGRADE WITH 752, AS ABOVE.
ANYONE UPDATING FROM 744 TO 752.
Plug in the null modem lead, PC & Replay Box. Switch on Replay Box and press the Setup Comm button on the stb link 5.20 If it?s connected a blue line will move from left to right confirming that a connection has been made.
KEEP MAINTAIN user box TICKED Then press the Upgrade Software Button and choose the appropriate file for your box. The Lite file is currently Version 752
There are 515 blocks of information to be downloaded. Allow the link to download and write the information to your box. During this time you will see the LED light on the Replay Lite flashing red/green approx every second.
When all blocks are transferred, your pc will read all transferred.
WAIT for another 3-5 mins, the box will take a little more time to read the blocks, even though your pc has read all transferred. WHEN the led flash much more quickly than it did when the where being visibly transferred, the box is upgraded.
EXIT STB LINK AND THEN UNPLUG THE BOX AND NULL MODEM LEAD.
POWER UP THE BOX AGAIN. Your unit should be flashed and ready to use.
If you already had your channels tuned in they will be still there, flick through the channels until they unscramble. It can take up to a minute or two to find the codes from cable network.
If you have no channels you?ll need to do a channel scan. Go to Auto Search. You will note that the Symbol Rate is set to 6887 & 6952. LEAVE it at this symbol rate as some of the channels have been changed. Now press search and it will take about 30 minutes.
During the search it will not start to find channels for about the first 5-10 minutes as it has to go through all of the frequencies. It will eventually find around 242 TV and 63 Radio but it will reduce this amount to around 130 TV and 40 Radio as it deletes the duplicates. When it is finished scanning the ?Scanning? button will change to ?View?
Press view and this will save your channels.
If you see 1800 Scrambled ? just wait a minute or so for the keys to update. You will only have to do this once.
Once your first scrambled channel comes in ? they all will!
There is a small glitch in the software which means that the ?info? button is not working. A patch will be developed for this.
IF YOU HAVE TROUBLE WITH SOUND, SWITCH OFF/ON THE BOX AND THE SOUND WILL BE OK
Setting up the Favourites Menu
1. Press the menu button
2. Navigate to the Channel Manager Section (top of screen)
3. Go to the TV Channel section and press OK
4. The TV Channel Manager is now available
5. By default you are now on Favourite 1 (pressing the RED button will take you through favourites 1-8).
6. Pressing the GREEN (edit) button allows you to change the Favourite 1 Menu to something more appropriate. I?ve set my favourites 1-8 as follows
a. 1. Popular TV
b. 2. Movies
c. 3. Sport
d. 4. Factual
e. 5. UK TV
f. 6. Music
g. 7. Kids
h. 8. Your Choice
7. When you press the Green Button you will have the option to RENAME FAV (navigate to this and press OK). You can now manually rename the Favourite to what you want,
8. As you scroll through the channel listings you can add your favourites as follows. If you have a favourite called Popular TV you may want to add the standard freeview channels. When you navigate to BBC 1 press the OK button and a Smiley Face will appear next to the channel ? this means it has been added to this favourites menu.
9. When you have finished (with for example ? Popular TV) press the RED Button and you will now be on Favourites 2 (pressing the RED button will scroll you through each of the EIGHT Favourite menus). If as I?ve done you?ve renamed Favourites 2 to Movies you may want to add Sky Movies 1/2/3/4 etc
10. When you are finished with your favourites ? press exit and the data will be saved.
ABOVE ALL BE PATIENT,
GOOD LUCK ALL
BRIAN1956
http://www.iol.ie/~bullwallbarkers/colleen.html
The mediocre teacher tells. The good teacher explains. The superior teacher demonstrates. The great teacher inspires."- William Arthur Ward
** This information is provided for educational purposes only. Misuse of the above is neither the responsibility of the author or the web host **
This message has been edited since posting. Last time this message was edited on 16. August 2007 @ 16:43
|
AfterDawn Addict
|
14. August 2007 @ 06:35 |
Link to this message
|
|
Hi Brian , I remember you had to delete the GT ROm from your registry , do you sill have the info cos I cant find it anywhere , please
|
Senior Member
|
14. August 2007 @ 06:46 |
Link to this message
|
Hi techkid,
and anybody is has a frozen replay lite, the red led stays on.
The reason why this happens is unplugging the box before the flash is complete. When files are transferring from your PC to the Box you will see the led flashing red/green slowly....WAIT untill you see the led flashing much more quickly, this happens about a couple of minutes after all the blocks have been transferred.
Download the file from the link below. It's 742a file.
http://www.speedyshare.com/480850955.html
Flash the box. Remember UNTICK maintain user data.
Wait until all the blocks are transferred and WAIT a couple of more minutes for the led to flash much more rapidily than it did when you could visibly see when the blocks were transferring.
Unplug everything and only connect the power lead.
Wait for the led to flash red/green and then stay on green.
Then flash with 744
http://www.speedyshare.com/166633270.html
AND FLASH WITH 752 OR CLONE WITH SOMEONE WHO HAS 752 ALREADY IN THEIR BOX. Each of the files below contain Replay Lite Software version 7.52, the STB/PC interface (stb5.20) and full instructions tailored for either UK or Ireland.
UK 752 http://www.speedyshare.com/859117548.html
IRL 752 http://www.speedyshare.com/262600882.html
A Null Modem Cable is required which can be purchased for ?18. from Maplins Dublin city centre or if you can wait to have it delivered you can purchase online for a fraction of the cost plus postage. One example of where they can be purchased online is http://www.amazon.co.uk/StarTech-com-Nul...9/dp/B00006B8BJ
Flashing your Replay Lite Box
Before you start you must have the following:
click Stblink5.20 Client and UNTICK the maintain user data box.
select upgrade software,
upload the 744 file.
There are 515 blocks of information to be downloaded. Allow the link to download and write the information to your box. During this time you will see the LED light on the Replay Lite flashing red/green approx every second.
When all blocks are transferred, your pc will read all transferred.
WAIT for another 3-5 mins, the box will take a little more time to read the blocks, even though your pc has read all transferred. WHEN the led flash much more quickly than it did when the where being visibly transferred, the box is upgraded.
IMPORTANT
EXIT STB LINK AND THEN UNPLUG THE BOX AND NULL MODEM LEAD.
POWER UP THE BOX AGAIN. THE LED WILL FLASH RED/GREEN.
WAIT UNTIL THE LED STAYS ON GREEN.
THEN RECONNECT NULL MODEM LEAD AND UPGRADE WITH 752, AS ABOVE.
ANYONE UPDATING FROM 744 TO 752.
Plug in the null modem lead, PC & Replay Box. Switch on Replay Box and press the Setup Comm button on the stb link 5.20 If it?s connected a blue line will move from left to right confirming that a connection has been made.
KEEP MAINTAIN user box TICKED
Then press the Upgrade Software Button and choose the appropriate file for your box. The Lite file is currently Version 752
There are 515 blocks of information to be downloaded. Allow the link to download and write the information to your box. During this time you will see the LED light on the Replay Lite flashing red/green approx every second.
When all blocks are transferred, your pc will read all transferred.
WAIT for another 3-5 mins, the box will take a little more time to read the blocks, even though your pc has read all transferred. WHEN the led flash much more quickly than it did when the where being visibly transferred, the box is upgraded.
EXIT STB LINK AND THEN UNPLUG THE BOX AND NULL MODEM LEAD.
POWER UP THE BOX AGAIN.
Your unit should be flashed and ready to use.
If you already had your channels tuned in they will be still there, flick through the channels until they unscramble. It can take up to a minute or two to find the codes from cable network.
If you have no channels you?ll need to do a channel scan. Go to Auto Search. You will note that the Symbol Rate is set to 6887 & 6952. Leave it at this symbol rate, as some of the channels have been changed. Now press search and it will take about 30 minutes.
During the search it will not start to find channels for about the first 5-10 minutes as it has to go through all of the frequencies. It will eventually find around 242 TV and 63 Radio but it will reduce this amount to around 130 TV and 40 Radio as it deletes the duplicates. When it is finished scanning the ?Scanning? button will change to ?View?
Press view and this will save your channels.
If you see 1800 Scrambled ? just wait a minute or so for the keys to update. You will only have to do this once.
Once your first scrambled channel comes in ? they all will!
There is a small glitch in the software which means that the ?info? button is not working. A patch will be developed for this.
IF YOU HAVE TROUBLE WITH SOUND, SWITCH OFF/ON THE BOX AND THE SOUND WILL BE OK
Setting up the Favourites Menu
1. Press the menu button
2. Navigate to the Channel Manager Section (top of screen)
3. Go to the TV Channel section and press OK
4. The TV Channel Manager is now available
5. By default you are now on Favourite 1 (pressing the RED button will take you through favourites 1-8).
6. Pressing the GREEN (edit) button allows you to change the Favourite 1 Menu to something more appropriate. I?ve set my favourites 1-8 as follows
a. 1. Popular TV
b. 2. Movies
c. 3. Sport
d. 4. Factual
e. 5. UK TV
f. 6. Music
g. 7. Kids
h. 8. Your Choice
7. When you press the Green Button you will have the option to RENAME FAV (navigate to this and press OK). You can now manually rename the Favourite to what you want,
8. As you scroll through the channel listings you can add your favourites as follows. If you have a favourite called Popular TV you may want to add the standard freeview channels. When you navigate to BBC 1 press the OK button and a Smiley Face will appear next to the channel ? this means it has been added to this favourites menu.
9. When you have finished (with for example ? Popular TV) press the RED Button and you will now be on Favourites 2 (pressing the RED button will scroll you through each of the EIGHT Favourite menus). If as I?ve done you?ve renamed Favourites 2 to Movies you may want to add Sky Movies 1/2/3/4 etc
10. When you are finished with your favourites ? press exit and the data will be saved.
ABOVE ALL BE PATIENT,
GOOD LUCK ALL
BRIAN1956 (on hols in south of France)Au Revoir
The mediocre teacher tells. The good teacher explains. The superior teacher demonstrates. The great teacher inspires."- William Arthur Ward
** This information is provided for educational purposes only. Misuse of the above is neither the responsibility of the author or the web host **
This message has been edited since posting. Last time this message was edited on 29. May 2008 @ 11:40
|
Senior Member
|
14. August 2007 @ 07:01 |
Link to this message
|
Hi all,
If you want to Save time on a rescan,
Download the file below to your desktop.
http://www.speedyshare.com/525336958.html
It has all my channels and favourites on it. All are working, but set##ta 2 will come on only sometimes, mostly on though.
Down the stb link file below to your desktop.
http://www.speedyshare.com/490167957.html
Run the stb link file.
Connect the null modem lead from your PC to the box.
Click Write Factory Data.
Get the file dub channel fav
Click Write Factory Data
There are 64 blocks to upload.
Wait a couple of minutes more after your PC has read all blocks transferred.
Then unplug the null modem lead and the box.
Power up the box again and in a few moments all my channels and favs will be on your box.
Brian.
** This information is provided for educational purposes only. Misuse of the above is neither the responsibility of the author or the web host **
|
Senior Member
|
14. August 2007 @ 07:07 |
Link to this message
|
** This information is provided for educational purposes only. Misuse of the above is neither the responsibility of the author or the web host **
|
AfterDawn Addict
|
14. August 2007 @ 07:48 |
Link to this message
|
|
Sorry I didnt explain it clearer , I remember Scouser giving you details on how to delete the GT ROM in the regedit , I need this info if you have it , Not the GT ROM itself lol
|
Senior Member
|
14. August 2007 @ 09:16 |
Link to this message
|
|
Hi celtic71,
Here is sc0user original post.
Sorry Brian,
I have been off for a while hope you are well, I have read your posts and I have seen this type of problem before, it might be a corruption of the gtromloader in your registry,(even downloading a new gtromloader will not correct this).
Please see if these instructions will help you.
MAKE SURE YOU'RE NOT RUNNING GTROM 1ST, CLOSE ANY INSTANCES OF IT THAT YOU ARE RUNNING.
Do the following:
Click start then run, type regedit in the space then OK.
This will open up windows registry [CAREFUL NOW!!]
Browse to:
HKEY_USERS\S-1-5-21-1659004503-1682526488-1202660629-1003\Software\Local AppWizard-Generated Applications\GTRom v4.00\GTRom
Look in the right hand pane, you'll see (Default),ML0, ML1, ML2, ML3 & ML4 under the Name column. In the data column the data for (Default) should read (value not set) in brackets.
The Data pane for ML0 should say GCR 3510 the others should be blank.
If it is not as above for either (Default) or ML0-ML4 just right click on either (Default) or the ML* (* BEING A NUMBER) that's wrong select modify and correct it in the value data pane then click ok.
Then exit the registry by selecting file then exit.
Next time you run GTROM all will be well.
Hpoe this helps celtic71.
** This information is provided for educational purposes only. Misuse of the above is neither the responsibility of the author or the web host **
|
AfterDawn Addict
|
14. August 2007 @ 09:20 |
Link to this message
|
|
Thanks a million Brian , thats the one , cheers
|
AfterDawn Addict
|
14. August 2007 @ 11:24 |
Link to this message
|
Originally posted by Celtic71:
Thanks a million Brian , thats the one , cheers
Mess up the Gtromloader Celt :) Only joking give us a shout when you are around.
|
AfterDawn Addict
|
14. August 2007 @ 12:58 |
Link to this message
|
|
Ha ha Scouser lol It wasnt for me ya dafty lol
|
AfterDawn Addict
|
14. August 2007 @ 13:02 |
Link to this message
|
Originally posted by Celtic71:
Ha ha Scouser lol It wasnt for me ya dafty lol
:)
|
|
bigwadz
Newbie
|
14. August 2007 @ 23:16 |
Link to this message
|
|
hey guys wots the story with setantas sports cant get 1 or 2 just cums up scrambled all the time anybody help me out with this
|
|
fergusrb
Suspended permanently
|
14. August 2007 @ 23:28 |
Link to this message
|
Originally posted by bigwadz:
hey guys wots the story with setantas sports cant get 1 or 2 just cums up scrambled all the time anybody help me out with this
Its basically a cc problem at the moment a lot of people are having the same problem try rescanning the frequency that they are on and you might get lucky ok
|
|
bigwadz
Newbie
|
15. August 2007 @ 05:39 |
Link to this message
|
|
tried rescan no joy any other ideas
|
Senior Member
|
15. August 2007 @ 06:09 |
Link to this message
|
Hi bigwadz,
My set#### 1+2 are on at the moment,
Sometimes they will go off, this just means channel off air.
It's not a problem with the box or your settings.
Have you flashed a box before.
Download the file below to your desktop.
It's a file called dub chan fav
http://www.speedyshare.com/525336958.html
It has all my channels and favourites on it. All are working, but set##ta 1 +2 will come on only sometimes, mostly on though.
They are on as I am typing this.
Down the stb link file below to your desktop.
http://www.speedyshare.com/490167957.html
Connect the null modem lead from your PC to the box
Run the stb link file.
Click Write Factory Data.
Get the file dub channel fav
Click Write Factory Data
There are 64 blocks to upload.
You will see the files transferring to your pc.
The led on the front of your box will flash red/green slowly.
Wait a couple of minutes more after your PC has read all blocks transferred.
The led will flash red/green very very quickly.
Exit the stb link.
Then unplug the null modem lead and the box.
Power up the box again and in a few moments all my channels and favs will be on your box.
Brian.
** This information is provided for educational purposes only. Misuse of the above is neither the responsibility of the author or the web host **
|
|
leinsterq
Newbie
|
15. August 2007 @ 08:00 |
Link to this message
|
|
hey im new to this website and have a replay lite box.it went down at the end of may.i was given a set of codes for it.i was told to go to the parental lock screen and press the red button but whenever i press the red button nothing happens.if anyone has any advice 4 me it would be greatly appreciated
|
|
Advertisement
|
|
|
Senior Member
|
15. August 2007 @ 10:13 |
Link to this message
|
|
What software revision is on your box?
The latest software is v 7.52 & if you flash your box with this software you will not need to enter any more codes as it will update the codes itself.
Everything you will need to do this is already on this site, just read back through the posts for download links if you need them.
|
