|
Replay Lite
|
|
Please note that the forum rules have changed. Posting of new codes is no longer allowed. See this thread for more information.
|
Senior Member
|
20. August 2007 @ 08:05 |
Link to this message
|
|
What's the fix for a Replay Lite that has 7.52 software but is displaying "Scrambled 0000" after a full scan?
|
|
Advertisement
|
|
|
|
|
Whoishe
Junior Member
|
20. August 2007 @ 08:54 |
Link to this message
|
|
Gman,
Goto Menu>Parental Lock> type in 7777 then ok.... it'll be fine!
|
Senior Member
|
20. August 2007 @ 10:33 |
Link to this message
|
Originally posted by Whoishe:
Gman,
Goto Menu>Parental Lock> type in 7777 then ok.... it'll be fine!
Cheers Whoishe,
I couldn't remember that even though I came across it before.
Thanks for the memory refresh :-)
|
Senior Member
|
20. August 2007 @ 12:46 |
Link to this message
|
Hi pfogo,
Sorry that didn't work for you.
Unless you know someone in your area who has an updated box for you to clone off, you will have to do the following.
Download the file from the link below. It's 742a file.
http://www.speedyshare.com/480850955.html
Flash the box. Remember UNTICK maintain user data.
Wait until all the blocks are transferred and WAIT a couple of more minutes for the led to flash much more rapidily than it did when you could visibly see when the blocks were transferring.
Unplug everything and only connect the power lead.
Wait for the led to flash red/green and then stay on green.
Then flash with 744 http://www.speedyshare.com/745799164.html
AND FLASH WITH 752 OR CLONE WITH SOMEONE WHO HAS 752 ALREADY IN THEIR BOX. Each of the files below contain Replay Lite Software version 7.52, the STB/PC interface (stb5.20) and full instructions tailored for either UK or Ireland.
UK 752 http://www.speedyshare.com/859117548.html
IRL 752 http://www.speedyshare.com/262600882.html
A Null Modem Cable is required which can be purchased for ?18. from Maplins Dublin city centre or if you can wait to have it delivered you can purchase online for a fraction of the cost plus postage. One example of where they can be purchased online is http://www.amazon.co.uk/StarTech-com-Nul...9/dp/B00006B8BJ
Flashing your Replay Lite Box
Before you start you must have the following:
click Stblink5.20 Client and UNTICK the maintain user data box.
select upgrade software,
upload the 744 file.
There are 515 blocks of information to be downloaded. Allow the link to download and write the information to your box. During this time you will see the LED light on the Replay Lite flashing red/green approx every second.
When all blocks are transferred, your pc will read all transferred.
WAIT for another 3-5 mins, the box will take a little more time to read the blocks, even though your pc has read all transferred. WHEN the led flash much more quickly than it did when the where being visibly transferred, the box is upgraded.
IMPORTANT
EXIT STB LINK AND THEN UNPLUG THE BOX AND NULL MODEM LEAD.
POWER UP THE BOX AGAIN. THE LED WILL FLASH RED/GREEN.
WAIT UNTIL THE LED STAYS ON GREEN.
THEN RECONNECT NULL MODEM LEAD AND UPGRADE WITH 752, AS ABOVE
ANYONE UPDATING FROM 744 TO 752.
Plug in the null modem lead, PC & Replay Box. Switch on Replay Box and press the Setup Comm button on the stb link 5.20 If it?s connected a blue line will move from left to right confirming that a connection has been made.
KEEP MAINTAIN user box TICKED Then press the Upgrade Software Button and choose the appropriate file for your box. The Lite file is currently Version 752
There are 515 blocks of information to be downloaded. Allow the link to download and write the information to your box. During this time you will see the LED light on the Replay Lite flashing red/green approx every second.
When all blocks are transferred, your pc will read all transferred.
WAIT for another 3-5 mins, the box will take a little more time to read the blocks, even though your pc has read all transferred. WHEN the led flash much more quickly than it did when the where being visibly transferred, the box is upgraded.
EXIT STB LINK AND THEN UNPLUG THE BOX AND NULL MODEM LEAD. POWER UP THE BOX AGAIN. Your unit should be flashed and ready to use.
If you already had your channels tuned in they will be still there, flick through the channels until they unscramble. It can take up to a minute or two to find the codes from cable network.
If you have no channels you?ll need to do a channel scan. Go to Auto Search. You will note that the Symbol Rate is set to 6887 & 6952. LEAVE it at this symbol rate as some of the channels have been changed. Now press search and it will take about 30 minutes.
During the search it will not start to find channels for about the first 5-10 minutes as it has to go through all of the frequencies. It will eventually find around 242 TV and 63 Radio but it will reduce this amount to around 130 TV and 40 Radio as it deletes the duplicates. When it is finished scanning the ?Scanning? button will change to ?View?
Press view and this will save your channels.
If you see 1800 Scrambled ? just wait a minute or so for the keys to update. You will only have to do this once.
Once your first scrambled channel comes in ? they all will!
There is a small glitch in the software which means that the ?info? button is not working. A patch will be developed for this.
IF YOU HAVE TROUBLE WITH SOUND, SWITCH OFF/ON THE BOX AND THE SOUND WILL BE OK
Setting up the Favourites Menu
1. Press the menu button
2. Navigate to the Channel Manager Section (top of screen)
3. Go to the TV Channel section and press OK
4. The TV Channel Manager is now available
5. By default you are now on Favourite 1 (pressing the RED button will take you through favourites 1-8).
6. Pressing the GREEN (edit) button allows you to change the Favourite 1 Menu to something more appropriate. I?ve set my favourites 1-8 as follows
a. 1. Popular TV
b. 2. Movies
c. 3. Sport
d. 4. Factual
e. 5. UK TV
f. 6. Music
g. 7. Kids
h. 8. Your Choice
7. When you press the Green Button you will have the option to RENAME FAV (navigate to this and press OK). You can now manually rename the Favourite to what you want,
8. As you scroll through the channel listings you can add your favourites as follows. If you have a favourite called Popular TV you may want to add the standard freeview channels. When you navigate to BBC 1 press the OK button and a Smiley Face will appear next to the channel ? this means it has been added to this favourites menu.
9. When you have finished (with for example ? Popular TV) press the RED Button and you will now be on Favourites 2 (pressing the RED button will scroll you through each of the EIGHT Favourite menus). If as I?ve done you?ve renamed Favourites 2 to Movies you may want to add Sky Movies 1/2/3/4 etc
10. When you are finished with your favourites ? press exit and the data will be saved,
** This information is provided for educational purposes only. Misuse of the above is neither the responsibility of the author or the web host **
|
Senior Member
|
20. August 2007 @ 12:50 |
Link to this message
|
Originally posted by gman496:
Originally posted by Whoishe:
Gman,
Goto Menu>Parental Lock> type in 7777 then ok.... it'll be fine!
Cheers Whoishe,
I couldn't remember that even though I came across it before.
Thanks for the memory refresh :-)
Hi gman496,
The auld memory going???
I thought I was the only grandad on here. (he he he )
** This information is provided for educational purposes only. Misuse of the above is neither the responsibility of the author or the web host **
|
Senior Member
|
20. August 2007 @ 13:35 |
Link to this message
|
|
Hi Brian1956,
Yep I'm afraid it's the early onset of you know what...........
|
|
fergusrb
Suspended permanently
|
20. August 2007 @ 13:40 |
Link to this message
|
|
yer all right i am here with ya as well Brian age creeping up on us all ha ha ha
|
Senior Member
|
20. August 2007 @ 16:19 |
Link to this message
|
Hi kids.
I have just uploaded some files to.
http://eko.4shared.com/
It's much easier to download from there
Go to the Replay folder.
In Documentation folder you will find,
Flashing the replay lite PDF.
Frozen box (word doc) for anybody with a dead box.
Frozen box PDF for anybody with a dead box.
Replay lite owners? handbook PDF.
Replay lite owners? handbook (word doc)
In the firmware folder you will find the files used to update or fix your box.
742a,
743a,
744,
750,
752 UK,
752 IRL,
and the files needed for the Replay Box with hard drive
In the software folder you will find,
Stblink5.20, the file used to transfer the firmware from your PC to your box.
nitenite,sleep tight.
BRIAN1956
** This information is provided for educational purposes only. Misuse of the above is neither the responsibility of the author or the web host **
|
Junior Member
|
20. August 2007 @ 23:55 |
Link to this message
|
|
Hi Guys,
Fair play to ye all for all the advise and help. Have a wee problem with a Replay Lite Remote Control. Main board inside is cracked and one of the diodes smashed. Anyone any ideas where I might get a replacement or codes for a universal one
Cheers
OK, so whats the speed of dark?
|
|
pfogo
Newbie
|
21. August 2007 @ 00:36 |
Link to this message
|
Originally posted by BRIAN1956:
Hi pfogo,
Sorry that didn't work for you.
Unless you know someone in your area who has an updated box for you to clone off, you will have to do the following.
Download the file from the link below. It's 742a file.
http://www.speedyshare.com/480850955.html
Flash the box. Remember UNTICK maintain user data.
Wait until all the blocks are transferred and WAIT a couple of more minutes for the led to flash much more rapidily than it did when you could visibly see when the blocks were transferring.
Unplug everything and only connect the power lead.
Wait for the led to flash red/green and then stay on green.
Then flash with 744 http://www.speedyshare.com/745799164.html
AND FLASH WITH 752 OR CLONE WITH SOMEONE WHO HAS 752 ALREADY IN THEIR BOX. Each of the files below contain Replay Lite Software version 7.52, the STB/PC interface (stb5.20) and full instructions tailored for either UK or Ireland.
UK 752 http://www.speedyshare.com/859117548.html
IRL 752 http://www.speedyshare.com/262600882.html
A Null Modem Cable is required which can be purchased for ?18. from Maplins Dublin city centre or if you can wait to have it delivered you can purchase online for a fraction of the cost plus postage. One example of where they can be purchased online is http://www.amazon.co.uk/StarTech-com-Nul...9/dp/B00006B8BJ
Flashing your Replay Lite Box
Before you start you must have the following:
click Stblink5.20 Client and UNTICK the maintain user data box.
select upgrade software,
upload the 744 file.
There are 515 blocks of information to be downloaded. Allow the link to download and write the information to your box. During this time you will see the LED light on the Replay Lite flashing red/green approx every second.
When all blocks are transferred, your pc will read all transferred.
WAIT for another 3-5 mins, the box will take a little more time to read the blocks, even though your pc has read all transferred. WHEN the led flash much more quickly than it did when the where being visibly transferred, the box is upgraded.
IMPORTANT
EXIT STB LINK AND THEN UNPLUG THE BOX AND NULL MODEM LEAD.
POWER UP THE BOX AGAIN. THE LED WILL FLASH RED/GREEN.
WAIT UNTIL THE LED STAYS ON GREEN.
THEN RECONNECT NULL MODEM LEAD AND UPGRADE WITH 752, AS ABOVE
ANYONE UPDATING FROM 744 TO 752.
Plug in the null modem lead, PC & Replay Box. Switch on Replay Box and press the Setup Comm button on the stb link 5.20 If it?s connected a blue line will move from left to right confirming that a connection has been made.
KEEP MAINTAIN user box TICKED Then press the Upgrade Software Button and choose the appropriate file for your box. The Lite file is currently Version 752
There are 515 blocks of information to be downloaded. Allow the link to download and write the information to your box. During this time you will see the LED light on the Replay Lite flashing red/green approx every second.
When all blocks are transferred, your pc will read all transferred.
WAIT for another 3-5 mins, the box will take a little more time to read the blocks, even though your pc has read all transferred. WHEN the led flash much more quickly than it did when the where being visibly transferred, the box is upgraded.
EXIT STB LINK AND THEN UNPLUG THE BOX AND NULL MODEM LEAD. POWER UP THE BOX AGAIN. Your unit should be flashed and ready to use.
If you already had your channels tuned in they will be still there, flick through the channels until they unscramble. It can take up to a minute or two to find the codes from cable network.
If you have no channels you?ll need to do a channel scan. Go to Auto Search. You will note that the Symbol Rate is set to 6887 & 6952. LEAVE it at this symbol rate as some of the channels have been changed. Now press search and it will take about 30 minutes.
During the search it will not start to find channels for about the first 5-10 minutes as it has to go through all of the frequencies. It will eventually find around 242 TV and 63 Radio but it will reduce this amount to around 130 TV and 40 Radio as it deletes the duplicates. When it is finished scanning the ?Scanning? button will change to ?View?
Press view and this will save your channels.
If you see 1800 Scrambled ? just wait a minute or so for the keys to update. You will only have to do this once.
Once your first scrambled channel comes in ? they all will!
There is a small glitch in the software which means that the ?info? button is not working. A patch will be developed for this.
IF YOU HAVE TROUBLE WITH SOUND, SWITCH OFF/ON THE BOX AND THE SOUND WILL BE OK
Setting up the Favourites Menu
1. Press the menu button
2. Navigate to the Channel Manager Section (top of screen)
3. Go to the TV Channel section and press OK
4. The TV Channel Manager is now available
5. By default you are now on Favourite 1 (pressing the RED button will take you through favourites 1-8).
6. Pressing the GREEN (edit) button allows you to change the Favourite 1 Menu to something more appropriate. I?ve set my favourites 1-8 as follows
a. 1. Popular TV
b. 2. Movies
c. 3. Sport
d. 4. Factual
e. 5. UK TV
f. 6. Music
g. 7. Kids
h. 8. Your Choice
7. When you press the Green Button you will have the option to RENAME FAV (navigate to this and press OK). You can now manually rename the Favourite to what you want,
8. As you scroll through the channel listings you can add your favourites as follows. If you have a favourite called Popular TV you may want to add the standard freeview channels. When you navigate to BBC 1 press the OK button and a Smiley Face will appear next to the channel ? this means it has been added to this favourites menu.
9. When you have finished (with for example ? Popular TV) press the RED Button and you will now be on Favourites 2 (pressing the RED button will scroll you through each of the EIGHT Favourite menus). If as I?ve done you?ve renamed Favourites 2 to Movies you may want to add Sky Movies 1/2/3/4 etc
10. When you are finished with your favourites ? press exit and the data will be saved,
Hi Brian
What can I say for the amount of time it has taken you to compile all of this information I only hope it works, as I am not up to full speed on a computer. I will have to wait till the week end to get help
from one of my more knowledge able mates
Thanks again and I will let you know how things worked out
|
|
darren66
Junior Member
|
21. August 2007 @ 03:04 |
Link to this message
|
Originally posted by bassman42:
Hi Guys,
Fair play to ye all for all the advise and help. Have a wee problem with a Replay Lite Remote Control. Main board inside is cracked and one of the diodes smashed. Anyone any ideas where I might get a replacement or codes for a universal one
Cheers
hi bassman you can order remote controls for replay lite from http://www.replaylite.net
or call 0845 22 66 930
they are £20 +p&p
|
|
darren66
Junior Member
|
21. August 2007 @ 03:06 |
Link to this message
|
Originally posted by darren66:
Originally posted by bassman42:
Hi Guys,
Fair play to ye all for all the advise and help. Have a wee problem with a Replay Lite Remote Control. Main board inside is cracked and one of the diodes smashed. Anyone any ideas where I might get a replacement or codes for a universal one
Cheers
hi bassman you can order remote controls for replay lite from http://www.replaylite.net
or call 0845 22 66 930
they are £20 +p&p
you will need to email them from that site as they do not list them but do sell them
|
Senior Member
|
21. August 2007 @ 08:15 |
Link to this message
|
|
Nice one darren66
** This information is provided for educational purposes only. Misuse of the above is neither the responsibility of the author or the web host **
|
|
boldbaby
Junior Member
|
21. August 2007 @ 08:19 |
Link to this message
|
|
hi, does any 1 know how to do a search to find channel 4 +1 ?
|
Senior Member
|
22. August 2007 @ 02:21 |
Link to this message
|
|
Hi boldbaby,
I jst did a full on nhell Dublin.
No channel 4+1 as yet. they must not be broadcasting it.
** This information is provided for educational purposes only. Misuse of the above is neither the responsibility of the author or the web host **
|
Junior Member
|
22. August 2007 @ 05:46 |
Link to this message
|
Quote:
Thanks a million Darren66
. I just sent them off an email. Will let you know how I get on.
Really good forum this....You sound like a nice bunch of guys
Bassman42
OK, so whats the speed of dark?
|
Member
|
22. August 2007 @ 11:41 |
Link to this message
|
|
scaning replay box pvr nothing yet do tou put cable in ariel or ant in think might be wrong have cable in ariel
|
Member
|
22. August 2007 @ 12:27 |
Link to this message
|
|
its ok got it sorted
|
Junior Member
|
23. August 2007 @ 11:41 |
Link to this message
|
|
hello mr replay lite box maker... any chance of posting the update for the info button?? pleeeeeeeeesssseeeeeee.....
karlzips
|
|
raykelly
Newbie
|
24. August 2007 @ 13:04 |
Link to this message
|
Hi lads
i went and got the null modem cable l71btbut whan i go in to stb link 5.20 and click Setup Comm button it says access denied then says com port open error un pluged the cable severel times and swicheced on and off the box but no luck any ideas whats wrong
thanking you in advance
Raykelly
|
Senior Member
|
24. August 2007 @ 14:48 |
Link to this message
|
Hi raykelly,,
You might want to force the flash down the box.
You will lose the channels you have saved but you can do a rescan.
Plug in the null modem lead, PC & Replay Box. Switch on Replay Box and press the Setup Comm button on the stb link 5.20 If it?s connected a blue line will move from left to right confirming that a connection has been made.
KEEP MAINTAIN user box UNTICKED Then press the Upgrade Software Button and choose the appropriate file for your box. The Lite file is currently Version 752.
You might see error0, ignore this
There are 515 blocks of information to be downloaded. Allow the link to download and write the information to your box. During this time you will see the LED light on the Replay Lite flashing red/green approx every second.
When all blocks are transferred, your pc will read all transferred.
WAIT for another 3-5 mins, the box will take a little more time to read the blocks, even though your pc has read all transferred. WHEN the led flash much more quickly than it did when the where being visibly transferred, the box is upgraded.
EXIT STB LINK AND THEN UNPLUG THE BOX AND NULL MODEM LEAD. POWER UP THE BOX AGAIN. Your unit should be flashed and ready to use.
If you already had your channels tuned in they will be still there, flick through the channels until they unscramble. It can take up to a minute or two to find the codes from cable network.
If you have no channels you?ll need to do a channel scan. Go to Auto Search. You will note that the Symbol Rate is set to 6887 & 6952. LEAVE it at this symbol rate as some of the channels have been changed. Now press search and it will take about 30 minutes.
During the search it will not start to find channels for about the first 5-10 minutes as it has to go through all of the frequencies. It will eventually find around 242 TV and 63 Radio but it will reduce this amount to around 130 TV and 40 Radio as it deletes the duplicates. When it is finished scanning the ?Scanning? button will change to ?View?
Press view and this will save your channels.
If you see 1800 Scrambled ? just wait a minute or so for the keys to update. You will only have to do this once.
Once your first scrambled channel comes in ? they all will!
There is a small glitch in the software which means that the ?info? button is not working. A patch will be developed for this.
IF YOU HAVE TROUBLE WITH SOUND, SWITCH OFF/ON THE BOX AND THE SOUND WILL BE OK
Setting up the Favourites Menu
1. Press the menu button
2. Navigate to the Channel Manager Section (top of screen)
3. Go to the TV Channel section and press OK
4. The TV Channel Manager is now available
5. By default you are now on Favourite 1 (pressing the RED button will take you through favourites 1-8).
6. Pressing the GREEN (edit) button allows you to change the Favourite 1 Menu to something more appropriate. I?ve set my favourites 1-8 as follows
a. 1. Popular TV
b. 2. Movies
c. 3. Sport
d. 4. Factual
e. 5. UK TV
f. 6. Music
g. 7. Kids
h. 8. Your Choice
7. When you press the Green Button you will have the option to RENAME FAV (navigate to this and press OK). You can now manually rename the Favourite to what you want,
8. As you scroll through the channel listings you can add your favourites as follows. If you have a favourite called Popular TV you may want to add the standard freeview channels. When you navigate to BBC 1 press the OK button and a Smiley Face will appear next to the channel ? this means it has been added to this favourites menu.
9. When you have finished (with for example ? Popular TV) press the RED Button and you will now be on Favourites 2 (pressing the RED button will scroll you through each of the EIGHT Favourite menus). If as I?ve done you?ve renamed Favourites 2 to Movies you may want to add Sky Movies 1/2/3/4 etc
10. When you are finished with your favourites ? press exit and the data will be saved,
** This information is provided for educational purposes only. Misuse of the above is neither the responsibility of the author or the web host **
|
Senior Member
|
24. August 2007 @ 22:54 |
Link to this message
|
Hi raykelly,
If you live in Dublin and want to save time on a rescan.
Even for people who have scanned their boxes, this is handy to have as a backup.
Download the file below to your desktop.
Its a file called dub channel fav.
http://www.speedyshare.com/525336958.html
It has all my channels and favourites on it. All are working.
You need a null modem lead part number L71BT Don't accept anything that has not got this part number on it.
Down the stb link file below to your desktop.
http://www.speedyshare.com/490167957.html
Run the stb link file.
Connect the null modem lead from your PC to the box.
Click Write Factory Data.
Get the file dub channel fav
Click Write Factory Data There are 64 blocks to upload.
Wait a couple of minutes more after your PC has read all blocks transferred.
The red/green light should be flashing much more quickly than it was when you could visibly see the files transferring.
Then unplug the null modem lead and the box.
Power up the box again and in a few moments all my channels and favs will be on your box.
** This information is provided for educational purposes only. Misuse of the above is neither the responsibility of the author or the web host **
|
Member
|
24. August 2007 @ 23:44 |
Link to this message
|
|
got replay box pvr its great heres the but time keeps changing any ideas
|
|
2steven0
Newbie
|
25. August 2007 @ 00:08 |
Link to this message
|
|
Hi Brain
I have tried to download the dub channel fav. you have uploaded ,but it seems to be a text file only ,can you pm me the file direct ,
Many Thanks
Steven
|
|
Advertisement
|
|
|
Senior Member
|
25. August 2007 @ 01:26 |
Link to this message
|
It's meant to be a TEXT file. When you connect to the box you choose the "Wite Factory Data" option & point to the TEXT file for upload to the box.
Originally posted by 2steven0:
Hi Brain
I have tried to download the dub channel fav. you have uploaded ,but it seems to be a text file only ,can you pm me the file direct ,
Many Thanks
Steven
This message has been edited since posting. Last time this message was edited on 25. August 2007 @ 01:27
|
