|
Replay Lite
|
|
Please note that the forum rules have changed. Posting of new codes is no longer allowed. See this thread for more information.
|
Senior Member
|
1. September 2007 @ 06:56 |
Link to this message
|
Originally posted by Ciaran87:
Thanks a million brian -thats fantastic i`ll get cracking on downloading this now
If your machine(PC) has a 9pin Serial port then L71BT is what you need (see link below).
http://www.maplin.co.uk/Search.aspx?criteria=l71bt&source=15&SD=Y
The one in you post is for a PC with 15 pins(& yes that is the L72BT)
|
|
Advertisement
|
|
|
|
|
lyndon70
Junior Member
|
1. September 2007 @ 10:50 |
Link to this message
|
|
Thanks again Brian and Scouser,
checked your info out, it turned out to be clone like you said.
all working ok with the feb update.
cheers
lyndon
|
|
Whoishe
Junior Member
|
1. September 2007 @ 11:34 |
Link to this message
|
Brian and/or Scouser,
Can you help me out? Most of my mates have the Replay Lite which I've flashed with autoroll for them, although typically one of them has been arkward and got a cloned Starview (not the box). Can you tell be which version of the software I need to use in Dublin as there are about 6 or 7 different bins on eamos?
Also, is there anything I need to watch out for when flashing?
Cheers guys.
|
AfterDawn Addict
|
1. September 2007 @ 11:40 |
Link to this message
|
Hi , I hope this helps
Are you sure its a clone ?
If so you will need the 2.57_fixed file , it can be found in Eamo site in my sig
You also need to download the GT ROM Loader in the softwa*e folder ,
Updating Firmware
Connect your box and PC with a Null modem cable and switch on the cable box and put it on STANDBY.
(The Starview does not need to be connected to TV to update it with GTROM)
Open GTROM Loader software make sure that you set the correct COM PORT that matches the one that is being used
Make sure App file only is selected, then click Bin File & browse to the firmware where you downloaded it to on your PC.
Run the GTROM loader by pressing Download and you will see the % progress increase then Download completed message on your PC.
Wait until you see the DOWNLOAD COMPLETE pop up on your PC before
removing the NULL MODEM CABLE. The Starview will then reboot
Turn off then plug your tv cable and scart back in
|
|
Whoishe
Junior Member
|
1. September 2007 @ 11:48 |
Link to this message
|
|
Cheers Celt.... I'll give it a go!
|
AfterDawn Addict
|
1. September 2007 @ 11:52 |
Link to this message
|
|
AfterDawn Addict
|
1. September 2007 @ 12:03 |
Link to this message
|
|
Busy one tonight Celt :)
This message has been edited since posting. Last time this message was edited on 1. September 2007 @ 12:03
|
AfterDawn Addict
|
1. September 2007 @ 12:05 |
Link to this message
|
Originally posted by lyndon70:
Thanks again Brian and Scouser,
checked your info out, it turned out to be clone like you said.
all working ok with the feb update.
cheers
lyndon
Glad you got it sorted. I only seen your query yesterday and Brian said he would get it to you and always he is a man of his word ;)
|
Senior Member
|
3. September 2007 @ 03:15 |
Link to this message
|
Hi red05
hi brian can you tell me, if I purchased a replay lite box from a normal retailer rather than eBay, and box came blank, what software would I need to get ,to get it working up to the standard you can buy off eBay ready to just to plug and play?..
Sorry for the delay getting back to you, I was at a wedding Saturday and was wrecked on Sunday. I had Insomnia and was trying to sleep it off.
It is better not to put things in my shoutbox as I seldom view it.
Post them here and the rest of the clan are always about willing to help.
If you know someone with a working box, you can clone the new box from theirs.
If you can?t do that, the following will help you out.
ALL THE FILES REQUIRED AT
http://eko.4shared.com/
A guide to flashing can be found in DOCUMENTATION.
You will need a null modem lead to transfer the files from your computer to your box.
Make sure the null modem lead has part number L71BT OR L72BT on the front of the cover. Depending on what port you have on your computer.
Do not accept anything that does not have these part numbers.
A Null Modem Cable is required which can be purchased for ?18 from Maplins Dublin city centre or if you can wait to have it delivered you can purchase online UK for a fraction of the cost plus postage. A couple of examples of where they can be purchased online are these links, thanks to gman496
Serial Null Modem 25-Pin Female to 9-Pin Female.
http://www.maplin.co.uk/Module.aspx?Modu...urce=14&doy=2m9
Serial Null Modem 9-Pin Female to 9-Pin Female.
http://www.maplin.co.uk/Search.aspx?criteria=l71bt&source=15&SD=Y
STB LINK FILE 5.20 FOUND UNDER SOFTWAREThis is the programme that will transfer the firmware to your box.
AND FLASH WITH 752 FOUND UNDER FIRMWARE Flash the box. Remember UNTICK maintain user data.
Wait until all the blocks are transferred and WAIT a couple of more minutes for the led to flash much more rapidly than it did when you could visibly see when the blocks were transferring.
Unplug everything and connect the power lead and TV and SCART leads.
Your box should be now ready for a rescan.
DOWNLOAD THE REPLAY HANDBOOK IN DOCUMENTATION.
Hope this helps you red05,
Apologises for not geting back to you sooner
** This information is provided for educational purposes only. Misuse of the above is neither the responsibility of the author or the web host **
This message has been edited since posting. Last time this message was edited on 3. September 2007 @ 03:31
|
Senior Member
|
3. September 2007 @ 03:21 |
Link to this message
|
|
To use parental lock on the replay lite box.
You need to go to parental lock.
Your current password is probably 7777.
This needs to be changed to 0000 for parental lock to work.
After you have changed the password to 0000.
Exit back to TV and go into parental lock again and switch it to ON.
Go to channel manager-TV channel.
Scroll to the channel you wish to have locked.
Press the green button on your remote control to edit the selected channel.
Select lock, you will be asked to enter password, enter 0000.
The channel you have should be highlighted in yellow.
Press ok on your remote control and a lock symbol will appear beside the selected channel.
At this time you can scroll to any other channel and press OK to lock them also.
Exit to TV screen.
When anybody goes to select the locked channels they will have to enter 0000 to view.
To unlock the channels.
Parental lock off or
Go to channel manager select the locked channel
Edit, enter password, press OK and the lock symbol will disappear.
Exit back to TV screen
** This information is provided for educational purposes only. Misuse of the above is neither the responsibility of the author or the web host **
|
|
GERBHOY
Junior Member
|
3. September 2007 @ 05:10 |
Link to this message
|
Originally posted by BRIAN1956:
Hi gerbhoy,
Welcome to the forum.
GO to menu
user installation
manual search....OK
a box will appear.
On channel number, change this number to the one after the last number that you have stored on your box.
You have 127, set the channel number at 128.
Change the symbol rate to 6887
Leave the constellation at 64QAM
Search by network........ON
And click search.
During the search a small number of channels will be found.
One of them will be the one you are looking for.
Select view to save them all.
They will be stored from channel 128 onwards.
Delete the ones you already have stored and delete where you originally had the channel you were looking for.
Then move the new channel you were looking for to the location you require.
Hi Brian 1956
Thanks for the help but i tried to follow these instructions over the weekend but my box will not let me go up one channel i have 127 but it will not let me enter 128 it just goes back to Channel 1.
Any ideas anyone?
Cheers
Gerbhoy
|
Senior Member
|
3. September 2007 @ 05:37 |
Link to this message
|
Hi GERBHOY,
When you go to manual search, can you not change the channel number to 128????
It should allow you to do this.
Or if you have a null moden lead, you can copy all my channels, which are all OK to your PC and send them to your box.
Download the file below to your desktop.
Its a file called dub channel fav.
http://www.speedyshare.com/525336958.html
It has all my channels and favourites on it. All are working.
You need a null modem lead part number L71BT Don't accept anything that has not got this part number on it.
You can get one in maplins.
Download the stb link file below to your desktop.
http://www.speedyshare.com/490167957.html
Connect the null modem lead from your PC to the box.
Run the stb link file.
Click Write Factory Data.
Get the file dub channel fav from your desktop.
Click Write Factory Data There are 64 blocks to upload.
Wait a couple of minutes more after your PC has read all blocks transferred.
The red/green light should be flashing much more quickly than it was when you could visibly see the files transferring.
Then unplug the null modem lead and the box.
Power up the box again and in a few moments all my channels and favs will be on your box.
It will be quicker than cloning, and I have all the channels stored in that file.
below is a word doc. of all my channels that are on the dub_chan_fav
http://www.speedyshare.com/178312505.html
** This information is provided for educational purposes only. Misuse of the above is neither the responsibility of the author or the web host **
|
|
GERBHOY
Junior Member
|
3. September 2007 @ 12:10 |
Link to this message
|
Originally posted by BRIAN1956:
Hi GERBHOY,
When you go to manual search, can you not change the channel number to 128????
It should allow you to do this.
Or if you have a null moden lead, you can copy all my channels, which are all OK to your PC and send them to your box.
Download the file below to your desktop.
Its a file called dub channel fav.
http://www.speedyshare.com/525336958.html
It has all my channels and favourites on it. All are working.
You need a null modem lead part number L71BT Don't accept anything that has not got this part number on it.
You can get one in maplins.
Download the stb link file below to your desktop.
http://www.speedyshare.com/490167957.html
Connect the null modem lead from your PC to the box.
Run the stb link file.
Click Write Factory Data.
Get the file dub channel fav from your desktop.
Click Write Factory Data There are 64 blocks to upload.
Wait a couple of minutes more after your PC has read all blocks transferred.
The red/green light should be flashing much more quickly than it was when you could visibly see the files transferring.
Then unplug the null modem lead and the box.
Power up the box again and in a few moments all my channels and favs will be on your box.
It will be quicker than cloning, and I have all the channels stored in that file.
below is a word doc. of all my channels that are on the dub_chan_fav
http://www.speedyshare.com/178312505.html
Hi Brian 1956
I do not have a null modem cable or a PC at home but i will get the cable and try it from my PC at work and let you know how i get on.
Cheers again
Gerbhoy
|
|
GERBHOY
Junior Member
|
3. September 2007 @ 12:14 |
Link to this message
|
Originally posted by GERBHOY:
Originally posted by BRIAN1956:
Hi GERBHOY,
When you go to manual search, can you not change the channel number to 128????
It should allow you to do this.
Or if you have a null moden lead, you can copy all my channels, which are all OK to your PC and send them to your box.
Download the file below to your desktop.
Its a file called dub channel fav.
http://www.speedyshare.com/525336958.html
It has all my channels and favourites on it. All are working.
You need a null modem lead part number L71BT Don't accept anything that has not got this part number on it.
You can get one in maplins.
Download the stb link file below to your desktop.
http://www.speedyshare.com/490167957.html
Connect the null modem lead from your PC to the box.
Run the stb link file.
Click Write Factory Data.
Get the file dub channel fav from your desktop.
Click Write Factory Data There are 64 blocks to upload.
Wait a couple of minutes more after your PC has read all blocks transferred.
The red/green light should be flashing much more quickly than it was when you could visibly see the files transferring.
Then unplug the null modem lead and the box.
Power up the box again and in a few moments all my channels and favs will be on your box.
It will be quicker than cloning, and I have all the channels stored in that file.
below is a word doc. of all my channels that are on the dub_chan_fav
http://www.speedyshare.com/178312505.html
Hi Brian 1956
I do not have a null modem cable or a PC at home but i will get the cable and try it from my PC at work and let you know how i get on.
Cheers again
Gerbhoy
MY PC at work will not let me download the STB file as the IT dept have blocked it.Any other ideas?
Cheers
Gerbhoy
|
Senior Member
|
3. September 2007 @ 14:01 |
Link to this message
|
|
gerbhoy, I just sent you a PM.
Go to edit my account at the top of this page and check your private messages.
Thought at this stage, you probably are better off doing an
Auto Search OR do the mnaual search on channel 127 and get whatever channel you have stored there back later.
If you are doing an Auto Search,
Start freq at 290
End freq at 395
Symbol rate 6887
** This information is provided for educational purposes only. Misuse of the above is neither the responsibility of the author or the web host **
This message has been edited since posting. Last time this message was edited on 3. September 2007 @ 20:18
|
AfterDawn Addict
3 product reviews
|
4. September 2007 @ 00:31 |
Link to this message
|
|
Brian, just done my first replay box last nite - upgraded firmware and channel dump, it now autorolls - Thanks for your detailed descriptions for doing this!
Cheers
|
Senior Member
|
4. September 2007 @ 02:00 |
Link to this message
|
Hi mickah,
Cheers young brother,
Delighted you are up and running!
Fair play to you and magic on flashing the box first time.
Thanks for the feedback and happy viewing.
** This information is provided for educational purposes only. Misuse of the above is neither the responsibility of the author or the web host **
|
|
benjipete
Suspended due to non-functional email address
|
6. September 2007 @ 12:58 |
Link to this message
|
|
Hi,
My set top box went down on wednesday evening it is a replay lite one of my house mates got off ebay, we recently ( a couple of months ago ) did a firmware update.
I have tried to re-program all the channels but it comes up with 'scrambled 0000' ( normally comes up with 'scrambled 1800') with the NRL finals just around the corner I really need to get this working. Any help would be greatly appreciated.
Cheers
Ben
|
Senior Member
|
6. September 2007 @ 13:03 |
Link to this message
|
Originally posted by benjipete:
Hi,
My set top box went down on wednesday evening it is a replay lite one of my house mates got off ebay, we recently ( a couple of months ago ) did a firmware update.
I have tried to re-program all the channels but it comes up with 'scrambled 0000' ( normally comes up with 'scrambled 1800') with the NRL finals just around the corner I really need to get this working. Any help would be greatly appreciated.
Cheers
Ben
Hi,
Goto Menu>Parental Lock> type in 7777 then ok.... This will sort it & you should be fine!
|
|
benjipete
Suspended due to non-functional email address
|
6. September 2007 @ 13:15 |
Link to this message
|
|
Sorry when I say re-program I meant go in and do an auto search.
|
Senior Member
|
6. September 2007 @ 13:31 |
Link to this message
|
|
I knew what you ment & the fix is exactly the same. Do as suggested in my last post & it will be fine.
|
|
benjipete
Suspended due to non-functional email address
|
6. September 2007 @ 13:48 |
Link to this message
|
|
Thanks mate that worked a treat checked a few channels ... legend
|
Senior Member
|
6. September 2007 @ 14:20 |
Link to this message
|
GR8 to see you're sorted.
This board has one aim, "to help everyone keep their box working"
Check back from time to time. if there are any updates you will get them here ;-)
|
|
Ciaran87
Newbie
|
7. September 2007 @ 03:14 |
Link to this message
|
Just want to say cheers brian for helping me out in flashing the box-didnt have a breeze what to do before you explained it!
Might get working on downloading your channels you have saved as i`m missing a few
thanks
|
|
Advertisement
|
|
|
Senior Member
|
7. September 2007 @ 05:12 |
Link to this message
|
Thanks Ciaran87,
I'm delighted you have updated the box and all is well.
It should be no problenm for you now to upload my channels and favourites to your replay lite.
You already have a null modem lead and the stblink file.
Download the file below to your desktop.
Its a file called dub channel fav.
http://www.speedyshare.com/525336958.html
It has all my channels and favourites on it. All are working in Dublin 9.
Connect the null modem lead from your PC to the box.
Run the stb link file.
Click Write Factory Data.
Get the file dub channel fav from your desktop.
Click Write Factory Data There are 64 blocks to upload.
Wait a couple of minutes more after your PC has read all blocks transferred.
The red/green light should be flashing much more quickly than it was when you could visibly see the files transferring.
Then unplug the null modem lead and the box.
Power up the box again and in a few moments all my channels and favs will be on your box.
It will be quicker than cloning, and I have all the channels stored in that file.
below is a word doc. of all my channels that are on the dub_chan_fav
http://www.speedyshare.com/178312505.html
You might just have to rename favourites,
1 General TV
2 Movies
3 Sports
4 Music
5 Kids
6 Documentaries
7 News
8 Others
To do this go to Menu-Channel Manager-TV Channel-OK
A box will appear-TV Channel Manager
You will see favourites 1 near the top of the screen
Press the Green button on your remote, to edit
select Rename FAV. then just type in the favourite name required.
When I first came on here, I hadn't a clue how to do these things, but this is a great learning place, with some great very helpful people. You can also some useful information on other topics if you click on forums at the top of the page.
I owe those people a great deal of thanks.
Happy viewing Ciaran,
** This information is provided for educational purposes only. Misuse of the above is neither the responsibility of the author or the web host **
This message has been edited since posting. Last time this message was edited on 7. September 2007 @ 08:45
|
