Originally posted by gpdiesel:

---

i cant get wii sports to work so i didnt even bother with a back up of a game. I just assumed i needed to update the wii key and use config 1.3 before i could do that. For the record my wii is at version 2.3 . I dont know if that matters

---

Originally posted by gpdiesel:

---

Thanks . I hope thats the problem because i didnt want to resolder my wii key. I'll have to check it out tommorrow. Out of curiousity, If I messed up my wii key installation would i still be able to play original games on the wii. Thanks again for your help guys

---

Originally posted by Sac123:

---

I'm getting the disk read error for the 1.9b update disk. So far I have my wii updated with latest nintendo firmware. And I've tried the nero method of burning, the padded method, and the multidisc method, with and without padding to 1.4gb.
Is it possible the dvd I'm using isn't proper. I'm using mini dvd-r's that I've used to backup some of my gc games that have worked in the past (not since a nintendo update).

Or can I use full 4.7gb verbatime dvd-rs?

---

Originally posted by Kev96:

---

For anyone still not being able to burn the config or region disc here is how (using firmware 3.1U, E or J) Need Gamecube Gamepad!

1. Download from wiikey.cn Wiikey update 1.9b and Config disc 1.3, use WinRAR to extract it.

2. Download MultiGame ISO Creator v3.2.4F, use WinRAR to extract it.

3. Do not use filechop or fixsize.

4. Go to where you extracted the MultiGame ISO Creator v3.2.4F and open MultiGameISOCreator.exe

5. Now click on Add ISO and add the bootdisc(US for north amercia, Pal for mainly Europe, and Jap for most of asia) image of wiikey 1.9b then again click on add iso and add the config 1.3 disc (same region stuff).

6. Now that you've added config disc 1.3 it'll say config 1.2 just ignore it.

7. Now we are not yet ready to burn the Iso (or gcm) file. Look at the top right corner see region select your region.

8. Now click on Create MultiGame Iso and save it wherever you want to(advanced stuff: to change the file extension write your file name then .iso or .gcm i used .iso).

9. Now burn it with IMGBurn (or whatever you burn with) at 4x speed no you dont need a dvd-r you either use dvd+r or dvd-r no change book type to do (tested!)

10. Now that its done burning you must be wondering my wii wont read this it wont reconize it, it doesnt have enough memory on it well test it your self! If its not working then try burning with Nero (its really weird if it doesnt work).

11. Now this is the last step!...............enjoy playing updated and you're done.

Any Questions? then put a message on the fourm or quote.

---

Originally posted by Cobaltos:

---

Uhm, I have this other problem, when I load the 1.9 update, that smexy butt shows up and all. And I press A to test flash. After it the counter reaches 100% it takes a few seconds and then tells my Testing flash failed.

I don't know what to do, it does it with the disc I used filechop.exe on, and the one I didn't. I also can run config 1.3 normally and my current firmware is 3.0E.

---

Originally posted by johnb1987:

---

Originally posted by Cobaltos:

---

Uhm, I have this other problem, when I load the 1.9 update, that smexy butt shows up and all. And I press A to test flash. After it the counter reaches 100% it takes a few seconds and then tells my Testing flash failed.

I don't know what to do, it does it with the disc I used filechop.exe on, and the one I didn't. I also can run config 1.3 normally and my current firmware is 3.0E.

---

I am having this exact same problem. It gets to 100% then says to "check my connections". I'm not sure what that means. My backups work fine.

I have the 1.9 update, and 1.3 config disk on one disk, using the GCOS multi tutorial in this thread. I seem to be able to toggle the options on and off in the 1.3 disk, but when I go to the SNES emulator, I get a fuzzy screen with colorful pixels. No clue what's going on...

---

Originally posted by Cobaltos:

---

My backups won't work though, just gives me an error telling me to eject, or it won't read at all.

---

Originally posted by Snino:

---

I'm having trouble using the 1.3 config disk.
Manage to install the 1.9b wiikey update and manage to use the config disk on my WII but its seem that i can not save the new setting on wiikey Eg Region override [ON/OFF] change the setting to ON and save the setting and reset the Wii but when i come back to config disk setting screen its shows as OFF inseat of ON.

Does this mean Region Override function is not working properly ?

My Wii is PAL and Firmware is 2.1

Please help

---

Originally posted by Cobaltos:

---

Originally posted by Snino:

---

I'm having trouble using the 1.3 config disk.
Manage to install the 1.9b wiikey update and manage to use the config disk on my WII but its seem that i can not save the new setting on wiikey Eg Region override [ON/OFF] change the setting to ON and save the setting and reset the Wii but when i come back to config disk setting screen its shows as OFF inseat of ON.

Does this mean Region Override function is not working properly ?

My Wii is PAL and Firmware is 2.1

Please help

---

Some people in this topic said that it's supposed to do that, and it does save your settings. Mine puts it back on off each time as well, no big deal.

---

Originally posted by docjarvis:

---

I am still having trouble getting my wii to read any type of back up. It still reads the originals fine, but wont pick up the config disc 1.3, updated disc 1.9 or any backup games. I have read forums for over 8 hours now and tried several methods and am now at a dead end. I am almost positive that the solder is good. It was done by someone with 20 years of soldering exp. Any ideas will help. I dont know if the disk need to be a certain size, certain type of media,i feel i have done everything. ANy ideas? THank you.

---

Originally posted by docjarvis:

---

"You mentioned that you could play Mario Strikers Charged earlier - has that now stopped working?

---