Dreambox 500T 500C Fixes here
|
|
Please note that the forum rules have changed. Posting of new codes is no longer allowed. See this thread for more information.
|
jamdorj
Junior Member
|
29. November 2008 @ 19:26 |
Link to this message
|
Originally posted by zappp64: Originally posted by jamdorj: I've downloaded the new nagra file but can't seem to get it installed on my box, I've always used a null modem cable before, but since my old pc died i don't have a null cable port, tried using an ethernet cable via my router to connect to the DCC but it comes up with this messege "Error 10057 in function Send Socket is not connected", where am I going wrong here people?
you need to use FTP to transfer the file
Yeah but don't I need to get it connected with my router before I can use FTP to transfer the file to my dreambox?
|
Advertisement
|
  |
|
Junior Member
|
29. November 2008 @ 19:51 |
Link to this message
|
Hey-----CG when you have sorted out the new image please let us all know. I was so grateful to you when you gave the world the new image. I think back in April /May earlier this year. No one on this planet makes it easier to do than you. You should rename yourself. Neo springs to mind. Dave. Come on mucker, make the masses happy. Only you know how to do it
|
mendi
Newbie
|
29. November 2008 @ 19:52 |
Link to this message
|
Originally posted by jamdorj: Originally posted by zappp64: Originally posted by jamdorj: I've downloaded the new nagra file but can't seem to get it installed on my box, I've always used a null modem cable before, but since my old pc died i don't have a null cable port, tried using an ethernet cable via my router to connect to the DCC but it comes up with this messege "Error 10057 in function Send Socket is not connected", where am I going wrong here people?
you need to use FTP to transfer the file
Yeah but don't I need to get it connected with my router before I can use FTP to transfer the file to my dreambox?
can u please pm me the new firmware,please
|
mendi
Newbie
|
29. November 2008 @ 20:21 |
Link to this message
|
guys i have been requesting for so long for help and no one replies,is that no wants to help me,or iam doing something wrong,idont have any clue,iam very new to all this,and above that not at all a tech guy,please help me someone!!
|
Junior Member
|
29. November 2008 @ 21:42 |
Link to this message
|
tell you wahat Medi. I was kind of felling the same way to. I hope this it one of those closed communities like the illuminati or billderbergs as I havent had any responses to my posts either. Come on chaps, help us out. Dave .
|
drawflex
Junior Member
|
29. November 2008 @ 21:58 |
Link to this message
|
look chaps, there are loads of helpfull people on here, but the change in keyroll yesterday has messed things up a bit.
I've sorted my box by connecting it over FTP and replacing one of the rom files (and deleting two others).
I've seen a few pages back that someone has put-up a new image file for dreamup via null-modem but haven't used it so can't comment on it.
FTP GUIDE (This worked for me, I'm no computer guru )
Plug a network cable in between your router and the dreambox
Using romote control go to menu/setup/expert setup/communications setup
Give your box an IP of 192.168.2.3 DHCP ON
Netmask 255.255.255.0
LAN
ENABLE NETWORK ON PORT 80
SAVE
Download FileZilla client
http://filezilla-project.org/
In host box put in 192.168.2.3
User root Pass dreambox NO PORT NEEDED
Filezilla should now be connected to your dreambox
Go to the var/keys directory
Delete the two files nagrarom10.bin and nagrarom11.bin (NOT nagraram !)
And replace nagrarom7.bin with the new one (you can drag and drop using filezilla)
NEW rom7 here ( in Dbox dreambox fix )
http://www.4shared.com/dir/3042613/f6e3421c/sharing.html
After this is done re-boot the box and sit on sky sports for a couple of mins untill evocamd finds the new keys
If FTPing to your box is outa your skill zone... either use the image mentioned here http://forums.afterdawn.com/thread_view.cfm/65/647188#4395033
or wait for someone to confirm it is working.
This message has been edited since posting. Last time this message was edited on 29. November 2008 @ 22:38
|
Newbie
|
30. November 2008 @ 03:47 |
Link to this message
|
hi scott how do i set up the db500s?
thanx
Fitz
Fitz
|
Senior Member
|
30. November 2008 @ 04:47 |
Link to this message
|
Originally posted by NFitz: hi scott how do i set up the db500s?
thanx
Fitz
the 500S is the satellite version.
|
jamdorj
Junior Member
|
30. November 2008 @ 04:55 |
Link to this message
|
Originally posted by drawflex: look chaps, there are loads of helpfull people on here, but the change in keyroll yesterday has messed things up a bit.
I've sorted my box by connecting it over FTP and replacing one of the rom files (and deleting two others).
I've seen a few pages back that someone has put-up a new image file for dreamup via null-modem but haven't used it so can't comment on it.
FTP GUIDE (This worked for me, I'm no computer guru )
Plug a network cable in between your router and the dreambox
Using romote control go to menu/setup/expert setup/communications setup
Give your box an IP of 192.168.2.3 DHCP ON
Netmask 255.255.255.0
LAN
ENABLE NETWORK ON PORT 80
SAVE
Download FileZilla client
http://filezilla-project.org/
In host box put in 192.168.2.3
User root Pass dreambox NO PORT NEEDED
Filezilla should now be connected to your dreambox
Go to the var/keys directory
Delete the two files nagrarom10.bin and nagrarom11.bin (NOT nagraram !)
And replace nagrarom7.bin with the new one (you can drag and drop using filezilla)
NEW rom7 here ( in Dbox dreambox fix )
http://www.4shared.com/dir/3042613/f6e3421c/sharing.html
After this is done re-boot the box and sit on sky sports for a couple of mins untill evocamd finds the new keys
If FTPing to your box is outa your skill zone... either use the image mentioned here http://forums.afterdawn.com/thread_view.cfm/65/647188#4395033
or wait for someone to confirm it is working.
Many thanks drawflex, followed your instructions and worked a treat except my dreambox ip was different to the one you've given. Fingers crossed this will last for a while. Thanks a lot again for taking time to write a turorial for techno noobs like us ;))
|
cgscott
Member
|
30. November 2008 @ 06:35 |
Link to this message
|
|
mossymor
Junior Member
|
30. November 2008 @ 06:48 |
Link to this message
|
Hi Chris, May I ask you a question please?
I am about to flash a new box for my Father.
Would I be as well to flash the older image you gave me as it still works fine here in Dublin, or am I better off using your new image?
Thanks for all your work. If it wasn't for you & some of the other experts on here there would be a lot of dead boxes around.
|
cgscott
Member
|
30. November 2008 @ 06:54 |
Link to this message
|
Flash it with the new image as the reason the boxes are still working is the keys havent rolled in your area yet.
But when they do the image previous will be of no use.
Cheers
Chris
|
GoodP
Newbie
|
30. November 2008 @ 07:18 |
Link to this message
|
Yaaay :)
Thankyou mysterious author.
GP.
|
mossymor
Junior Member
|
30. November 2008 @ 07:30 |
Link to this message
|
Thanks again Chris
Maurice
|
markmars
Newbie
|
30. November 2008 @ 08:57 |
Link to this message
|
|
sleepee
Newbie
|
30. November 2008 @ 09:18 |
Link to this message
|
Originally posted by markmars: Originally posted by cgscott: Right guys heres the new image and working.
All you need to do is scan your area. Then all should be fine.
Null Modem Image
http://www.megaupload.com/?d=WPDZFKUW
Flash Wizard Image
http://www.badongo.com/file/12296895
Cheers Chris
Remember to let us know how you get on.
it's not working here in wales mate
Or Devon :0( Can receive normal channels but nothing else
|
Junior Member
|
30. November 2008 @ 09:18 |
Link to this message
|
Hi chaps, flashed new image fine, however still only basic channels, anyone got any clues to what I did wrong? Thanks to all. Dave
|
sleepee
Newbie
|
30. November 2008 @ 10:19 |
Link to this message
|
Originally posted by nethy: Hi chaps, flashed new image fine, however still only basic channels, anyone got any clues to what I did wrong? Thanks to all. Dave
What worked for me was go to channel that isn't working push ok.
Wait for blank screen.
Hold down info button for couple of seconds and evocam option to restart will come up.
Hit okay. Channel should work.
I am having problem actually getting channels to show. Lots missing, movies, sports etc. Any ideas? have scanned through options on auto transponder scans.
Oh and thank you very much again CG
|
cgscott
Member
|
30. November 2008 @ 10:56 |
Link to this message
|
What channels are you getting sleepee?
Are you getting any of the locked ones?
|
rafmazz
Junior Member
|
30. November 2008 @ 11:06 |
Link to this message
|
same just gettin the free channels so what do i do to get them all ??
nano
|
sleepee
Newbie
|
30. November 2008 @ 11:21 |
Link to this message
|
All the basics plus things like fx and screen 2 dave +1 but not Dave
No movies/sport are showing at all
|
sleepee
Newbie
|
30. November 2008 @ 11:25 |
Link to this message
|
All the basics plus things like fx and screen 2 dave +1 but not Dave
No movies/sport are showing at all
I am doing another scan because none are working now again apart from basics. That is probably my fault however as I will insist on playing about with other options that I have no knowledge of whatsoever :0)
Cant help myself but then thats how you learn I suppose
|
Junior Member
|
30. November 2008 @ 11:26 |
Link to this message
|
Thanks for that sleepee
I tried the info button and it did come up with what you said but no evo just 2 boxes with the word none in. Im getting some of the free channels and radio but nowt else. Cheers chaps
|
cgscott
Member
|
30. November 2008 @ 11:28 |
Link to this message
|
Right guys heres the deal. I messed up and forgot to put a couple of important files in so im doing another one.
Will take bout 20 mins.
|
Advertisement
|
  |
|
sleepee
Newbie
|
30. November 2008 @ 11:32 |
Link to this message
|
You really are a star cg
Thank you ever so much for your time :0)
|