|
Dreambox 500T 500C Fixes here
|
|
Please note that the forum rules have changed. Posting of new codes is no longer allowed. See this thread for more information.
|
|
berkat
Junior Member
|
19. December 2008 @ 16:06 |
Link to this message
|
Originally posted by cicfada:
Originally posted by berkat:
Originally posted by cicfada:
Hi folks, I have bought a null modem cable and connected the box to the pc. Using version 1.3.3.4 of Dreamup I am following the instructions. It says to hit connect on the dreamup and then turn on the dreambox and then.........I am left waiting and waiting. it's not progressing! What the heck now?
With the dreambox switched off start up the dreamup program.
Then untick use network box.Then click connect.Sartup the dreambox.
It will connect.The flash box will then open.Click this it will ask for image.The image you download open that.Then it will flash the image to your box.
When flashing the image it will ask you to do a flash erase click no.
When image had downloaded connect the box back up.
Scan using N*L bruteforce
Pick a strong channel rte1 then hit the info button to turn off/on evocam leave for 5 mins then Bobs your Auntie.
Thanks again. I have followed your instructions to the letter but still to no avail! Maybe it takes a while longer to connect.Or maybe I am using the wrong version of dreamup! I have the dreamup window open alongside this one and this is bugging the heck out of me!
Think you need dreamup 2
|
|
Advertisement
|
|
|
|
|
cicfada
Newbie
|
19. December 2008 @ 16:08 |
Link to this message
|
|
OK i am getting somewhere now, it is flashing as I speak! I will get back to ye when the job is done!
cic
|
|
cicfada
Newbie
|
19. December 2008 @ 16:19 |
Link to this message
|
|
Right now I have this window on my tv that says "Kaos extra settings", how do i get rid of that and restart the box?
|
|
cicfada
Newbie
|
19. December 2008 @ 16:51 |
Link to this message
|
|
Right it worked finally, I have all the channels I need except 2 kids ones! Good enough! Thanks a million to all who helped!
cic
|
|
boxyman
Junior Member
|
19. December 2008 @ 18:38 |
Link to this message
|
|
Hi lads - where can i get Dreamup version 2.0
Can only find Versions 1 on forum
|
|
stibbler
Newbie
|
19. December 2008 @ 20:08 |
Link to this message
|
Ok, if anyone has the patience for this I'll be eternally grateful.
I made that stupid mistake that I mentioned earlier so I got a Null modem cable, connect via Dreamup and flashed the box. The box just hung on the DK logo screen at boot every time. Then I flashed with erase. This got me into the menus. Used Bruteforce ireland transponder scan but very few channels were working. Waited on RTE1 as advised but no joy. Rebooted the box and it hung on logo screen again. Seems I can only access the menu system by flash erasing but if I can never turn the box off or it hangs. Simply flash without erase makes it hang.
So I had an idea -> flashed with erase, accessed menus & checked IP address then connected via Dreambox Control Centre & crossover cable, FTP'd to the box and copied Chris's image into the var/tmp folder but cannot Telnet either with DCC or the regular command prompt->telnet to install the image (which should be done already I guess).
I don't understand how I've established a connection via DCC but cannot Telnet. The ip address is obviously right....
8 hours on this so far today flashing the box and reading the forums so my parents and neighbours can have their TV back. I've aged 10 years today.
|
|
alfredous
Suspended due to non-functional email address
|
19. December 2008 @ 21:07 |
Link to this message
|
hi guys, done different boxes with same image: different outcomes. My box is fine, my brothers simply won't pick up a transponder on Bruteforce UK (which worked fine for me at same location). His box is giving SNR 34% and AGC99%. What's the story. His frigging box won't connect to my PC via FTP either - otherwise I'd use an old image with the new nagrarom7.
|
|
stibbler
Newbie
|
19. December 2008 @ 22:18 |
Link to this message
|
|
Made some progress - I renamed the image file in var/tmp to root.cramfs and flashed the image by running the software update in the Dreambox expert setup menu. This seems to have stabilised the box - no longer hanging when rebooted. Still can't get more than a few channels no matter how many times I scan the providers. This seems to be a common issue but perhaps the above will help someone who has the same problem I did.
|
Member
|
20. December 2008 @ 06:12 |
Link to this message
|
Originally posted by stibbler:
Made some progress - I renamed the image file in var/tmp to root.cramfs and flashed the image by running the software update in the Dreambox expert setup menu. This seems to have stabilised the box - no longer hanging when rebooted. Still can't get more than a few channels no matter how many times I scan the providers. This seems to be a common issue but perhaps the above will help someone who has the same problem I did.
stibbler.
connect using the null modem cable and perform a flash erase. this will empty all software from the box. back to the beginning.
flash cg scotts previous last image, the link is here in this forum, i think it was posted about 7 or 8 months ago.
then flash the new image and click NO when asked if you would like to perform flash erase.
a bit basic but it is a solution.
good luck
|
Member
|
20. December 2008 @ 06:18 |
Link to this message
|
Originally posted by alfredous:
hi guys, done different boxes with same image: different outcomes. My box is fine, my brothers simply won't pick up a transponder on Bruteforce UK (which worked fine for me at same location). His box is giving SNR 34% and AGC99%. What's the story. His frigging box won't connect to my PC via FTP either - otherwise I'd use an old image with the new nagrarom7.
are you using a cross over cable? if not you need to connect via a hub,
the all round best solution, i found after much direction from cg scott is to buy a null modem cable, its 1000 times easier.
also when scanning is finished you must switch off the box and restart. once the box is restarted you need to re-start the evocam (press and hold the info button until the emu manager screen comes up) press ok to start/restart emu or cs. then put your box onto a strong signal channel and wait a couple minutes.
i notice that with this new image when you first start the box up it doesnt go to any channel. you have to select your channel manually, whereas the last image would start up on a channel already. might be worthwhile remembering this.
|
Member
|
20. December 2008 @ 06:20 |
Link to this message
|
Originally posted by boxyman:
Hi lads - where can i get Dreamup version 2.0
Can only find Versions 1 on forum
boxy,
i have version2 and will gladly send you it. just pm me your email addy.
i find version 1.3 to be a much better/forgiving software and is the one i use as a preference
|
Member
|
20. December 2008 @ 06:22 |
Link to this message
|
Originally posted by cicfada:
Right it worked finally, I have all the channels I need except 2 kids ones! Good enough! Thanks a million to all who helped!
cic
glad you got it working, sorry i wasn't around at the time to help.
if you try different area scans you will eventually find the optimum for your area with the most channels.
bit of a pain but if the kids are missing the 2 channels.............
good luck
|
|
boxyman
Junior Member
|
20. December 2008 @ 06:25 |
Link to this message
|
Thanks Mate. How do i PM you. I can only see a Shoutbox option when i hit your profile. It's probably staring me right in the face somewhere :)
Can you tell me if V1.3 worked for you. I need to fix my sisters today and haven't done this before to a Dream 500C. Have done a Starview 2 already though. Can you tell me if the below is correct.
Flash 500C box with Scott's backup.im file using Dreamup and i'm good to go?
|
|
ericcork
Newbie
|
20. December 2008 @ 07:05 |
Link to this message
|
|
I can confirm that latest image from cgscott works fine on 500C. I just flashed via crossover cable with Flashwizard 6.3 and after searching ch**us I got all channels back.
It did take a while for channels to come through (about 10mins)
Hold down Info button for 2-3 secs then restart Evocamd and wait for few minutes.
Thanks
|
|
alfredous
Suspended due to non-functional email address
|
20. December 2008 @ 07:07 |
Link to this message
|
Thanks Mark.
Have flashed two successfully using Dreamup and null modem. Brother's box simply won't pick up transponders.
Have tried flashing via Filezilla but can't connect.
Using ethernet cable direct PC to box.
Have also tied via router.
This message has been edited since posting. Last time this message was edited on 20. December 2008 @ 07:26
|
|
boxyman
Junior Member
|
20. December 2008 @ 07:10 |
Link to this message
|
|
Thanks guys,
I will be using a Null Modem Cable. So i flash it with Dreamup and then do the following after restart?
Hold down Info button for 2-3 secs then restart Evocamd and wait for few minutes.
|
|
boxyman
Junior Member
|
20. December 2008 @ 07:13 |
Link to this message
|
|
P.S. does the scanning start automatically when i reattach to tv after flashing?
|
Member
|
20. December 2008 @ 07:38 |
Link to this message
|
Originally posted by boxyman:
Thanks Mate. How do i PM you. I can only see a Shoutbox option when i hit your profile. It's probably staring me right in the face somewhere :)
Can you tell me if V1.3 worked for you. I need to fix my sisters today and haven't done this before to a Dream 500C. Have done a Starview 2 already though. Can you tell me if the below is correct.
Flash 500C box with Scott's backup.im file using Dreamup and i'm good to go?
hey boxy,
v 1.3 works fine with mine (dreambox dm 500c) null modem cable, dreamup and cg sctotts image is all you need. dont forget uncheck the use network box and click no when asked if you would like to perform a flash erase.
to pm people on this forum click on the icon of a head at the top right of the post.
good luck
mark ..
|
Member
|
20. December 2008 @ 07:44 |
Link to this message
|
Originally posted by alfredous:
Thanks Mark.
Have flashed two successfully using Dreamup and null modem. Brother's box simply won't pick up transponders.
Have tried flashing via Filezilla but can't connect.
Using ethernet cable direct PC to box.
Have also tied via router.
if you have a null modem cable then throw the ethernet cable into the skip mate, null modem is the only way forward.
is the box not connecting at all?
switch off the box
connect the null modem cable
start dreamup
select com port (it is not 1 or 3) mine is com 7
if another com port is not available then the null modem cable is not connected properly or you do not have the right software for your null modem cable. or the right cable (there are dodgy ones out there)
uncheck use network box
click connect
start dreambox
this should connect the pc to the dream box. if you do not get the message "the dreambox is connected and speaking to us ;)" there is something wrong with your cable connection.
after that its self explanatary
cheers
mark ..
|
Member
|
20. December 2008 @ 07:45 |
Link to this message
|
Originally posted by alfredous:
Thanks Mark.
Have flashed two successfully using Dreamup and null modem. Brother's box simply won't pick up transponders.
Have tried flashing via Filezilla but can't connect.
Using ethernet cable direct PC to box.
Have also tied via router.
if your brothers box will not pick up the transponders.
make sure the cable is connected.
try scanning different areas/bruteforce/services.
every one is different depending on their area
try your brothers box in your house and vice versa
good luck
|
Member
|
20. December 2008 @ 07:49 |
Link to this message
|
Originally posted by boxyman:
P.S. does the scanning start automatically when i reattach to tv after flashing?
menu
set up
service searching
automatic transponder scan
select your area (i am in dublin and ntl dublin didnt work for me, however bruteforce uk did. go figure)
select scan all (not free channels only)
scan
it will find a transponder and should sync and lock
continue search
good luck
mark ..
|
|
boxyman
Junior Member
|
20. December 2008 @ 07:52 |
Link to this message
|
|
Thanks Mark - Much appreciated
|
|
boxyman
Junior Member
|
20. December 2008 @ 08:00 |
Link to this message
|
Thanks Mark for everyting. Will give it a bash this afternoon and let yee know how i get on
|
|
Kavanelli
Newbie
|
20. December 2008 @ 09:43 |
Link to this message
|
|
I have a 600c will this update work the 600. When I go to automatic scan I don't have an option to select area.
Do I need a different image?
|
|
Advertisement
|
|
|
|
junger
Newbie
|
20. December 2008 @ 09:47 |
Link to this message
|
|
hi all
i am trying to address my dbox2 through a netgear wg router when i try to add a device in the router it is not saved.
I have wired between the dbox2 and the router with a cross-over and non crossover cable the dbox2 in the routeri entered the ip address of the dbox2 169 254 136 110. dbox mac address and name. the router does no save the device. I tried to ping the box but the ping says the device is out of reach. any ideas why it will not work please.
I can address the box when hard wired to the laptop
Thanx
Junger
ken
|
