Hey, I'm having a big problem with burning a game backup for a game the is now scratched and won't read. I have my xbox 360 modded with the latest Ixtreme fw, and my backup is Ixtreme compatible (as shown ticked in XDVDMulleter). When i try and burn the backup in its origional state with stealth and Ixtreme compatible, IMGBurn and Clone CD come up with fatal errors.
I am using an LG DL burner and DVD+R DL, MR.DVD dvds, which cost me $40 so I do not with to throw them out without trying all solutions.
I 16:59:52 ImgBurn Version 2.4.1.0 started!
I 16:59:52 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 2)
I 16:59:52 Total Physical Memory: 1,046,572 KB - Available: 624,808 KB
I 16:59:52 Initialising SPTI...
I 16:59:52 Searching for SCSI / ATAPI devices...
I 16:59:52 Found 1 DVD±RW/RAM!
I 17:02:35 Operation Started!
I 17:02:35 Source File: C:\game.dvd
I 17:02:35 Source File Sectors: 3,825,924 (MODE1/2048)
I 17:02:35 Source File Size: 7,835,492,352 bytes
I 17:02:35 Source File Volume Identifier: XGD2DVD_NTSC
I 17:02:35 Source File Volume Set Identifier: 34672923
I 17:02:35 Source File Implementation Identifier: Sonic Scenarist 3.1
I 17:02:35 Source File File System(s): ISO9660, UDF (1.02)
I 17:02:35 Destination Device: [0:0:0] HL-DT-ST DVDRAM GSA-T10N PC05 (F:) (ATA)
I 17:02:35 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D00-01) (Speeds: 2.4x)
I 17:02:35 Destination Media Sectors: 4,173,824
I 17:02:35 Write Mode: DVD I 17:02:35 Write Type: DAO I 17:02:35 Write Speed: 2x
I 17:02:35 Link Size: Auto
I 17:02:35 Test Mode: No
I 17:02:35 OPC: No
I 17:02:35 BURN-Proof: Enabled
I 17:02:35 Book Type Setting: N/A
I 17:02:35 User Specified L0 Data Zone Capacity: 1,913,760
I 17:03:39 Filling Buffer... (40 MB)
I 17:03:43 Writing LeadIn...
I 17:03:45 Writing Session 1 of 1... (1 Track, LBA: 0 - 3825923)
I 17:03:45 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3825923)
I 17:03:45 Writing Layer 0... (LBA: 0 - 1913759)
W 17:05:28 Waiting for buffers to recover...
W 17:05:45 Waiting for hard disk activity to reach threshold level...
I 17:05:48 Writing Sectors...
W 17:22:17 Failed to Write Sectors 1731296 - 1731327 - Reason: Unknown (Internal Target Failure) (0x44, 0x90)
W 17:22:17 Retrying (1 of 20)...
W 17:22:17 Retry Failed - Reason: Invalid Address For Write
W 17:22:17 Retrying (2 of 20)...
W 17:22:17 Retry Failed - Reason: Invalid Address For Write
W 17:22:17 Retrying (3 of 20)...
W 17:22:17 Retry Failed - Reason: Invalid Address For Write
W 17:22:17 Retrying (4 of 20)...
W 17:22:17 Retry Failed - Reason: Invalid Address For Write
E 17:23:27 Failed to Write Sectors 1731296 - 1731327 - Reason: Unknown (Internal Target Failure) (0x44, 0x90)
E 17:23:27 Next Writable Address: 1730752
I 17:23:27 Synchronising Cache...
W 17:23:36 User opted to skip the 'Close Track/Session/Disc' functions.
E 17:23:36 Failed to Write Image!
I 17:24:06 Exporting Graph Data...
I 17:24:06 Graph Data File: C:\Documents and Settings\Adam Watkins\Application Data\ImgBurn\Graph Data Files\HL-DT-ST_DVDRAM_GSA-T10N_PC05_07-MAY-2008_17-02_RICOHJPN-D00-01_2x.ibg
I 17:24:06 Export Successfully Completed!
E 17:24:06 Operation Failed! - Duration: 00:21:01
I 17:24:06 Average Write Rate: 2,929 KB/s (2.1x) - Maximum Write Rate: 3,387 KB/s (2.4x)
But if I rebuild the ISO (DVD9 with stealth and xtreme compatible in XDVDMulleter), it seems to burn fine, but I get a blank screen for a few seconds and then "cannot read disk" error returned by the 360. But if I check the rebuilt ISO with XDVDMulleter, the Ixtreme compatible box is not ticked.
I have already made 11 coasters from this and am getting a bit annoyed, so if someone would help, I would be most appreciated.
p.s. I have tried researching this for 2 days now, but cannot find a solution.
p.s,again. I have tried this in 2 computers with totally different burners and still doesn't work.
1. make sure your burner has the most up to date firmware 2. make sure your burner is set in system manager to burn using DMA mode
(you can do this byu going to start->control panel->system->hardware tab->device manager button->go to IDE ATA/ATAPI controllers
click the plus sign beside it
check each of the primary and secondary IDE channels listed there by right clicking on them and choosing properties, then under the advanced settings tab check to see that they are set to DMA mode.
also have you tried running a DVD ID check program, getting the disc ID, and looking it up on the internet to see what your actually using? From what i can see by that log your discs are not really high quality
http://www.google.com/search?hl=en&q=RICOHJPN-D00-01&btnG=Search a lot of those posts with that media ID you can tell are problems with burning.
RICOHJPN-D00-01 that is the ID if you did not know
